From 4fbfebea5beae805ff4679d416e675accaad0313 Mon Sep 17 00:00:00 2001 From: Mitchell Cash Date: Sat, 17 Oct 2015 20:10:45 +1000 Subject: [PATCH] Correct spelling mistakes in doc folder MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - OSX —> OS X - XCode —> Xcode - github —> GitHub - homebrew —> Homebrew - gitian —> Gitian - Other miscellaneous obvious spelling fixes and whitespace removal --- doc/README.md | 6 ++-- doc/README_osx.txt | 20 +++++------ doc/build-osx.md | 10 +++--- doc/developer-notes.md | 2 +- doc/dnsseed-policy.md | 2 +- doc/gitian-building.md | 60 +++++++++++++++---------------- doc/init.md | 8 ++--- doc/release-process.md | 34 +++++++++--------- doc/tor.md | 11 +++--- doc/translation_process.md | 2 +- doc/translation_strings_policy.md | 3 +- 11 files changed, 77 insertions(+), 81 deletions(-) diff --git a/doc/README.md b/doc/README.md index 60636dee6..891e265c8 100644 --- a/doc/README.md +++ b/doc/README.md @@ -7,7 +7,7 @@ Setup Running --------------------- -The following are some helpful notes on how to run Bitcoin on your native platform. +The following are some helpful notes on how to run Bitcoin on your native platform. ### Unix @@ -26,7 +26,7 @@ Unpack the files into a directory and run: Unpack the files into a directory, and then run bitcoin-qt.exe. -### OSX +### OS X Drag Bitcoin-Qt to your applications folder, and then run Bitcoin-Qt. @@ -41,7 +41,7 @@ Building --------------------- The following are developer notes on how to build Bitcoin on your native platform. They are not complete guides, but include notes on the necessary libraries, compile flags, etc. -- [OSX Build Notes](build-osx.md) +- [OS X Build Notes](build-osx.md) - [Unix Build Notes](build-unix.md) - [Gitian Building Guide](gitian-building.md) diff --git a/doc/README_osx.txt b/doc/README_osx.txt index a572c7a24..f589bfc67 100644 --- a/doc/README_osx.txt +++ b/doc/README_osx.txt @@ -1,12 +1,12 @@ -Deterministic OSX Dmg Notes. +Deterministic OS X Dmg Notes. -Working OSX DMGs are created in Linux by combining a recent clang, +Working OS X DMGs are created in Linux by combining a recent clang, the Apple's binutils (ld, ar, etc), and DMG authoring tools. Apple uses clang extensively for development and has upstreamed the necessary functionality so that a vanilla clang can take advantage. It supports the use of -F, -target, -mmacosx-version-min, and --sysroot, which are all necessary -when building for OSX. A pre-compiled version of 3.2 is used because it was not +when building for OS X. A pre-compiled version of 3.2 is used because it was not available in the Precise repositories at the time this work was started. In the future, it can be switched to use system packages instead. @@ -29,18 +29,18 @@ originally done in toolchain4. To complicate things further, all builds must target an Apple SDK. These SDKs are free to download, but not redistributable. -To obtain it, register for a developer account, then download the XCode 6.1.1 dmg: +To obtain it, register for a developer account, then download the Xcode 6.1.1 dmg: https://developer.apple.com/devcenter/download.action?path=/Developer_Tools/xcode_6.1.1/xcode_6.1.1.dmg This file is several gigabytes in size, but only a single directory inside is needed: Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk Unfortunately, the usual linux tools (7zip, hpmount, loopback mount) are incapable of opening this file. -To create a tarball suitable for gitian input, mount the dmg in OSX, then create it with: +To create a tarball suitable for Gitian input, mount the dmg in OS X, then create it with: $ tar -C /Volumes/Xcode/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/ -czf MacOSX10.9.sdk.tar.gz MacOSX10.9.sdk -The gitian descriptors build 2 sets of files: Linux tools, then Apple binaries +The Gitian descriptors build 2 sets of files: Linux tools, then Apple binaries which are created using these tools. The build process has been designed to avoid including the SDK's files in Gitian's outputs. All interim tarballs are fully deterministic and may be freely redistributed. @@ -64,20 +64,20 @@ Ideally, the creation could be fixed and genisoimage would no longer be necessar Background images and other features can be added to DMG files by inserting a .DS_Store before creation. The easiest way to create this file is to build a -DMG without one, move it to a device running OSX, customize the layout, then +DMG without one, move it to a device running OS X, customize the layout, then grab the .DS_Store file for later use. That is the approach taken here. -As of OSX Mavericks (10.9), using an Apple-blessed key to sign binaries is a +As of OS X Mavericks (10.9), using an Apple-blessed key to sign binaries is a requirement in order to satisfy the new Gatekeeper requirements. Because this private key cannot be shared, we'll have to be a bit creative in order for the build process to remain somewhat deterministic. Here's how it works: -- Builders use gitian to create an unsigned release. This outputs an unsigned +- Builders use Gitian to create an unsigned release. This outputs an unsigned dmg which users may choose to bless and run. It also outputs an unsigned app structure in the form of a tarball, which also contains all of the tools that have been previously (deterministically) built in order to create a final dmg. - The Apple keyholder uses this unsigned app to create a detached signature, using the script that is also included there. -- Builders feed the unsigned app + detached signature back into gitian. It +- Builders feed the unsigned app + detached signature back into Gitian. It uses the pre-built tools to recombine the pieces into a deterministic dmg. diff --git a/doc/build-osx.md b/doc/build-osx.md index dc319dd1c..815d6880c 100644 --- a/doc/build-osx.md +++ b/doc/build-osx.md @@ -1,6 +1,6 @@ Mac OS X Build Instructions and Notes ==================================== -This guide will show you how to build bitcoind (headless client) for OSX. +This guide will show you how to build bitcoind (headless client) for OS X. Notes ----- @@ -13,8 +13,8 @@ built-in one is located in `/Applications/Utilities`. Preparation ----------- -You need to install XCode with all the options checked so that the compiler -and everything is available in /usr not just /Developer. XCode should be +You need to install Xcode with all the options checked so that the compiler +and everything is available in /usr not just /Developer. Xcode should be available on your OS X installation media, but if not, you can get the current version from https://developer.apple.com/xcode/. If you install Xcode 4.3 or later, you'll need to install its command line tools. This can @@ -38,7 +38,7 @@ NOTE: Building with Qt4 is still supported, however, could result in a broken UI ### Building `bitcoind` -1. Clone the github tree to get the source code and go into the directory. +1. Clone the GitHub tree to get the source code and go into the directory. git clone https://github.com/bitcoin/bitcoin.git cd bitcoin @@ -62,7 +62,7 @@ Use Qt Creator as IDE You can use Qt Creator as IDE, for debugging and for manipulating forms, etc. Download Qt Creator from http://www.qt.io/download/. Download the "community edition" and only install Qt Creator (uncheck the rest during the installation process). -1. Make sure you installed everything through homebrew mentioned above +1. Make sure you installed everything through Homebrew mentioned above 2. Do a proper ./configure --with-gui=qt5 --enable-debug 3. In Qt Creator do "New Project" -> Import Project -> Import Existing Project 4. Enter "bitcoin-qt" as project name, enter src/qt as location diff --git a/doc/developer-notes.md b/doc/developer-notes.md index 8f7db31d5..f1e62b2d8 100644 --- a/doc/developer-notes.md +++ b/doc/developer-notes.md @@ -57,7 +57,7 @@ As Doxygen recognizes the comments by the delimiters (`/**` and `*/` in this cas To describe a class use the same construct above the class definition: ```c++ -/** +/** * Alerts are for notifying old versions if they become too obsolete and * need to upgrade. The message is displayed in the status bar. * @see GetWarnings() diff --git a/doc/dnsseed-policy.md b/doc/dnsseed-policy.md index 814ae3876..55a5c2825 100644 --- a/doc/dnsseed-policy.md +++ b/doc/dnsseed-policy.md @@ -7,7 +7,7 @@ As such, DNS seeds must be run by entities which have some minimum level of trust within the Bitcoin community. Other implementations of Bitcoin software may also use the same -seeds and may be more exposed. In light of this exposure, this +seeds and may be more exposed. In light of this exposure, this document establishes some basic expectations for operating dnsseeds. 0. A DNS seed operating organization or person is expected to follow good diff --git a/doc/gitian-building.md b/doc/gitian-building.md index 630b3c04a..50796c5f1 100644 --- a/doc/gitian-building.md +++ b/doc/gitian-building.md @@ -1,7 +1,7 @@ Gitian building ================ -*Setup instructions for a gitian build of Bitcoin using a Debian VM or physical system.* +*Setup instructions for a Gitian build of Bitcoin using a Debian VM or physical system.* Gitian is the deterministic build process that is used to build the Bitcoin Core executables. It provides a way to be reasonably sure that the @@ -13,7 +13,7 @@ Multiple developers build the source code by following a specific descriptor These results are compared and only if they match, the build is accepted and uploaded to bitcoin.org. -More independent gitian builders are needed, which is why I wrote this +More independent Gitian builders are needed, which is why I wrote this guide. It is preferred to follow these steps yourself instead of using someone else's VM image to avoid 'contaminating' the build. @@ -22,9 +22,9 @@ Table of Contents - [Create a new VirtualBox VM](#create-a-new-virtualbox-vm) - [Connecting to the VM](#connecting-to-the-vm) -- [Setting up Debian for gitian building](#setting-up-debian-for-gitian-building) -- [Installing gitian](#installing-gitian) -- [Setting up the gitian image](#setting-up-the-gitian-image) +- [Setting up Debian for Gitian building](#setting-up-debian-for-gitian-building) +- [Installing Gitian](#installing-gitian) +- [Setting up the Gitian image](#setting-up-the-gitian-image) - [Getting and building the inputs](#getting-and-building-the-inputs) - [Building Bitcoin](#building-bitcoin) - [Building an alternative repository](#building-an-alternative-repository) @@ -60,18 +60,18 @@ In the VirtualBox GUI click "Create" and choose the following parameters in the ![](gitian-building/create_vm_hard_drive.png) - Hard Drive: Create a virtual hard drive now - + ![](gitian-building/create_vm_hard_drive_file_type.png) -- Hard Drive file type: Use the default, VDI (VirtualBox Disk Image) +- Hard Drive file type: Use the default, VDI (VirtualBox Disk Image) ![](gitian-building/create_vm_storage_physical_hard_drive.png) - -- Storage on Physical hard drive: Dynamically Allocated - + +- Storage on Physical hard drive: Dynamically Allocated + ![](gitian-building/create_vm_file_location_size.png) -- Disk size: at least 40GB; as low as 20GB *may* be possible, but better to err on the safe side +- Disk size: at least 40GB; as low as 20GB *may* be possible, but better to err on the safe side - Push the `Create` button Get the [Debian 7.8 net installer](http://cdimage.debian.org/cdimage/archive/7.8.0/amd64/iso-cd/debian-7.8.0-amd64-netinst.iso) (a more recent minor version should also work, see also [Debian Network installation](https://www.debian.org/CD/netinst/)). @@ -81,7 +81,7 @@ Unixy OSes by entering the following in a terminal: echo "e39c36d6adc0fd86c6edb0e03e22919086c883b37ca194d063b8e3e8f6ff6a3a debian-7.8.0-amd64-netinst.iso" | sha256sum -c # (must return OK) -After creating the VM, we need to configure it. +After creating the VM, we need to configure it. - Click the `Settings` button, then go to the `Network` tab. Adapter 1 should be attached to `NAT`. @@ -125,22 +125,22 @@ and proceed, just press `Enter`. To select a different button, press `Tab`. ![](gitian-building/debian_install_4_configure_keyboard.png) - The VM will detect network settings using DHCP, this should all proceed automatically -- Configure the network: +- Configure the network: - System name `debian`. - Leave domain name empty. ![](gitian-building/debian_install_5_configure_the_network.png) -- Choose a root password and enter it twice (remember it for later) +- Choose a root password and enter it twice (remember it for later) ![](gitian-building/debian_install_6a_set_up_root_password.png) -- Name the new user `debian` (the full name doesn't matter, you can leave it empty) +- Name the new user `debian` (the full name doesn't matter, you can leave it empty) ![](gitian-building/debian_install_7_set_up_user_fullname.png) ![](gitian-building/debian_install_8_set_up_username.png) -- Choose a user password and enter it twice (remember it for later) +- Choose a user password and enter it twice (remember it for later) ![](gitian-building/debian_install_9_user_password.png) @@ -150,11 +150,11 @@ and proceed, just press `Enter`. To select a different button, press `Tab`. ![](gitian-building/debian_install_10_configure_clock.png) - Disk setup - - Partitioning method: Guided - Use the entire disk - + - Partitioning method: Guided - Use the entire disk + ![](gitian-building/debian_install_11_partition_disks.png) - - Select disk to partition: SCSI1 (0,0,0) + - Select disk to partition: SCSI1 (0,0,0) ![](gitian-building/debian_install_12_choose_disk.png) @@ -168,7 +168,7 @@ and proceed, just press `Enter`. To select a different button, press `Tab`. ![](gitian-building/debian_install_15_write_changes.png) - The base system will be installed, this will take a minute or so -- Choose a mirror (any will do) +- Choose a mirror (any will do) ![](gitian-building/debian_install_16_choose_a_mirror.png) @@ -217,7 +217,7 @@ Replace `root` with `debian` to log in as user. [1] http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html [2] http://winscp.net/eng/index.php -Setting up Debian for gitian building +Setting up Debian for Gitian building -------------------------------------- In this section we will be setting up the Debian installation for Gitian building. @@ -237,7 +237,7 @@ Then set up LXC and the rest with the following, which is a complex jumble of se ```bash # the version of lxc-start in Debian 7.4 needs to run as root, so make sure -# that the build script can exectute it without providing a password +# that the build script can execute it without providing a password echo "%sudo ALL=NOPASSWD: /usr/bin/lxc-start" > /etc/sudoers.d/gitian-lxc # add cgroup for LXC echo "cgroup /sys/fs/cgroup cgroup defaults 0 0" >> /etc/fstab @@ -257,7 +257,7 @@ reboot At the end the VM is rebooted to make sure that the changes take effect. The steps in this section need only to be performed once. -Installing gitian +Installing Gitian ------------------ Re-login as the user `debian` that was created during installation. @@ -277,14 +277,14 @@ cd .. **Note**: When sudo asks for a password, enter the password for the user *debian* not for *root*. -Clone the git repositories for bitcoin and gitian. +Clone the git repositories for bitcoin and Gitian. ```bash git clone https://github.com/devrandom/gitian-builder.git git clone https://github.com/bitcoin/bitcoin ``` -Setting up the gitian image +Setting up the Gitian image ------------------------- Gitian needs a virtual image of the operating system to build in. @@ -310,13 +310,13 @@ Getting and building the inputs Follow the instructions in [doc/release-process.md](release-process.md) in the bitcoin repository under 'Fetch and build inputs' to install sources which require manual intervention. Also follow the next step: 'Seed the Gitian sources cache', which will fetch all necessary source files allowing -for gitian to work offline. +for Gitian to work offline. Building Bitcoin ---------------- -To build Bitcoin (for Linux, OSX and Windows) just follow the steps under 'perform -gitian builds' in [doc/release-process.md](release-process.md) in the bitcoin repository. +To build Bitcoin (for Linux, OS X and Windows) just follow the steps under 'perform +Gitian builds' in [doc/release-process.md](release-process.md) in the bitcoin repository. This may take a long time as it also builds the dependencies needed for each descriptor. These dependencies will be cached after a successful build to avoid rebuilding them where possible. @@ -356,7 +356,7 @@ Building an alternative repository ----------------------------------- If you want to do a test build of a pull on GitHub it can be useful to point -the gitian builder at an alternative repository, using the same descriptors +the Gitian builder at an alternative repository, using the same descriptors and inputs. For example: @@ -386,7 +386,7 @@ in `gitian.sigs` to your signing machine and do ``` This will create the `.sig` files that can be committed together with the `.assert` files to assert your -gitian build. +Gitian build. Uploading signatures --------------------- diff --git a/doc/init.md b/doc/init.md index 1f206a6c0..c376ee4f1 100644 --- a/doc/init.md +++ b/doc/init.md @@ -35,9 +35,8 @@ generate one from the shell yourself like this: bash -c 'tr -dc a-zA-Z0-9 < /dev/urandom | head -c32 && echo' -Once you have a password in hand, set rpcpassword= in /etc/bitcoin/bitcoin.conf -For an example configuration file that describes the configuration settings, +For an example configuration file that describes the configuration settings, see contrib/debian/examples/bitcoin.conf. 3. Paths @@ -89,8 +88,8 @@ use old versions of Upstart and do not supply the start-stop-daemon utility. Copy bitcoind.init to /etc/init.d/bitcoind. Test by running "service bitcoind start". -Using this script, you can adjust the path and flags to the bitcoind program by -setting the BITCOIND and FLAGS environment variables in the file +Using this script, you can adjust the path and flags to the bitcoind program by +setting the BITCOIND and FLAGS environment variables in the file /etc/sysconfig/bitcoind. You can also use the DAEMONOPTS environment variable here. 5. Auto-respawn @@ -99,4 +98,3 @@ setting the BITCOIND and FLAGS environment variables in the file Auto respawning is currently only configured for Upstart and systemd. Reasonable defaults have been chosen but YMMV. - diff --git a/doc/release-process.md b/doc/release-process.md index 5ecb9334f..f98ddc6bd 100644 --- a/doc/release-process.md +++ b/doc/release-process.md @@ -23,15 +23,15 @@ Release Process * * * -###update gitian +###update Gitian - In order to take advantage of the new caching features in gitian, be sure to update to a recent version (`e9741525c` or later is recommended) + In order to take advantage of the new caching features in Gitian, be sure to update to a recent version (`e9741525c` or later is recommended) -###perform gitian builds +###perform Gitian builds From a directory containing the bitcoin source, gitian-builder and gitian.sigs - export SIGNER=(your gitian key, ie bluematt, sipa, etc) + export SIGNER=(your Gitian key, ie bluematt, sipa, etc) export VERSION=(new version, e.g. 0.8.0) pushd ./bitcoin git checkout v${VERSION} @@ -39,29 +39,29 @@ Release Process pushd ./gitian-builder ###fetch and build inputs: (first time, or when dependency versions change) - + mkdir -p inputs wget -P inputs https://bitcoincore.org/cfields/osslsigncode-Backports-to-1.7.1.patch wget -P inputs http://downloads.sourceforge.net/project/osslsigncode/osslsigncode/osslsigncode-1.7.1.tar.gz - Register and download the Apple SDK: (see OSX Readme for details) - + Register and download the Apple SDK: (see OS X Readme for details) + https://developer.apple.com/devcenter/download.action?path=/Developer_Tools/xcode_6.1.1/xcode_6.1.1.dmg - + Using a Mac, create a tarball for the 10.9 SDK and copy it to the inputs directory: - + tar -C /Volumes/Xcode/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/ -czf MacOSX10.9.sdk.tar.gz MacOSX10.9.sdk ###Optional: Seed the Gitian sources cache - By default, gitian will fetch source files as needed. For offline builds, they can be fetched ahead of time: + By default, Gitian will fetch source files as needed. For offline builds, they can be fetched ahead of time: make -C ../bitcoin/depends download SOURCES_PATH=`pwd`/cache/common Only missing files will be fetched, so this is safe to re-run for each build. ###Build Bitcoin Core for Linux, Windows, and OS X: - + ./bin/gbuild --commit bitcoin=v${VERSION} ../bitcoin/contrib/gitian-descriptors/gitian-linux.yml ./bin/gsign --signer $SIGNER --release ${VERSION}-linux --destination ../gitian.sigs/ ../bitcoin/contrib/gitian-descriptors/gitian-linux.yml mv build/out/bitcoin-*.tar.gz build/out/src/bitcoin-*.tar.gz ../ @@ -79,8 +79,8 @@ Release Process 1. source tarball (bitcoin-${VERSION}.tar.gz) 2. linux 32-bit and 64-bit dist tarballs (bitcoin-${VERSION}-linux[32|64].tar.gz) 3. windows 32-bit and 64-bit unsigned installers and dist zips (bitcoin-${VERSION}-win[32|64]-setup-unsigned.exe, bitcoin-${VERSION}-win[32|64].zip) - 4. OSX unsigned installer and dist tarball (bitcoin-${VERSION}-osx-unsigned.dmg, bitcoin-${VERSION}-osx64.tar.gz) - 5. Gitian signatures (in gitian.sigs/${VERSION}-/(your gitian key)/ + 4. OS X unsigned installer and dist tarball (bitcoin-${VERSION}-osx-unsigned.dmg, bitcoin-${VERSION}-osx64.tar.gz) + 5. Gitian signatures (in gitian.sigs/${VERSION}-/(your Gitian key)/ ###Next steps: @@ -94,11 +94,11 @@ Commit your signature to gitian.sigs: git push # Assuming you can push to the gitian.sigs tree popd - Wait for Windows/OSX detached signatures: - Once the Windows/OSX builds each have 3 matching signatures, they will be signed with their respective release keys. + Wait for Windows/OS X detached signatures: + Once the Windows/OS X builds each have 3 matching signatures, they will be signed with their respective release keys. Detached signatures will then be committed to the bitcoin-detached-sigs repository, which can be combined with the unsigned apps to create signed binaries. - Create the signed OSX binary: + Create the signed OS X binary: pushd ./gitian-builder ./bin/gbuild -i --commit signature=v${VERSION} ../bitcoin/contrib/gitian-descriptors/gitian-osx-signer.yml @@ -115,7 +115,7 @@ Commit your signature to gitian.sigs: mv build/out/bitcoin-*win32-setup.exe ../bitcoin-${VERSION}-win32-setup.exe popd -Commit your signature for the signed OSX/Windows binaries: +Commit your signature for the signed OS X/Windows binaries: pushd gitian.sigs git add ${VERSION}-osx-signed/${SIGNER} diff --git a/doc/tor.md b/doc/tor.md index 560f71fa2..e3fabfb2a 100644 --- a/doc/tor.md +++ b/doc/tor.md @@ -15,15 +15,15 @@ outgoing connections be anonymized, but more is possible. -proxy=ip:port Set the proxy server. If SOCKS5 is selected (default), this proxy server will be used to try to reach .onion addresses as well. - + -onion=ip:port Set the proxy server to use for tor hidden services. You do not need to set this if it's the same as -proxy. You can use -noonion to explicitly disable access to hidden service. - + -listen When using -proxy, listening is disabled by default. If you want to run a hidden service (see next section), you'll need to enable it explicitly. - + -connect=X When behind a Tor proxy, you can specify .onion addresses instead -addnode=X of IP addresses or hostnames in these parameters. It requires -seednode=X SOCKS5. In Tor mode, such addresses can also be exchanged with @@ -55,10 +55,10 @@ your bitcoind's P2P listen port (8333 by default). preference for your node to advertize itself with, for connections coming from unroutable addresses (such as 127.0.0.1, where the Tor proxy typically runs). - + -listen You'll need to enable listening for incoming connections, as this is off by default behind a proxy. - + -discover When -externalip is specified, no attempt is made to discover local IPv4 or IPv6 addresses. If you want to run a dual stack, reachable from both Tor and IPv4 (or IPv6), you'll need to either pass your @@ -82,4 +82,3 @@ If you only want to use Tor to reach onion addresses, but not use it as a proxy for normal IPv4/IPv6 communication, use: ./bitcoin -onion=127.0.0.1:9050 -externalip=57qr3yd1nyntf5k.onion -discover - diff --git a/doc/translation_process.md b/doc/translation_process.md index 3653e5302..3edcd2696 100644 --- a/doc/translation_process.md +++ b/doc/translation_process.md @@ -1,7 +1,7 @@ Translations ============ -The Bitcoin-Core project has been designed to support multiple localisations. This makes adding new phrases, and completely new languages easily achievable. For managing all application translations, Bitcoin-Core makes use of the Transifex online translation management tool. +The Bitcoin-Core project has been designed to support multiple localisations. This makes adding new phrases, and completely new languages easily achievable. For managing all application translations, Bitcoin-Core makes use of the Transifex online translation management tool. ### Helping to translate (using Transifex) Transifex is setup to monitor the Github repo for updates, and when code containing new translations is found, Transifex will process any changes. It may take several hours after a pull-request has been merged, to appear in the Transifex web interface. diff --git a/doc/translation_strings_policy.md b/doc/translation_strings_policy.md index 6824b1d8e..1a7decf56 100644 --- a/doc/translation_strings_policy.md +++ b/doc/translation_strings_policy.md @@ -1,7 +1,7 @@ Translation Strings Policy =========================== -This document provides guidelines for internationalization of the Bitcoin Core software. +This document provides guidelines for internationalization of the Bitcoin Core software. How to translate? ------------------ @@ -69,4 +69,3 @@ This may sometimes be at conflict with the recommendation in the previous sectio During a string freeze (often before a major release), no translation strings are to be added, modified or removed. This can be checked by executing `make translate` in the `src` directory, then verifying that `bitcoin_en.ts` remains unchanged. -