- the logger has been extended to log the level as well
- there is only partial match of levels between SDK logger levels, OSLogEntryLogLevel and OSLogType so only debug, info, error are fully matched
- this is a base for the exporter on client's side
[#1325] Log metrics
- typos fixed
[#1325] Log metrics
- scan metric logs added
[#1325] Log metrics
- Scan & Enhance logs
[#1325] Log metrics
- checkpoints updated
- every CBP action is measured separately and collects the data, when the sync is done it dumps overview of the run to the logger
- next run clears out the previous data and starts to collect fresh reports for the run
[#1325] Log metrics (#1327)
- changelog update
[#1325] Log metrics (#1327)
- SDKMetrics updated to be mockable
- unit test updated
[#1325] Log metrics (#1327)
- performance tests cleaned out
[#1325] Log metrics (#1327)
- Network tests buildable again
The improved performance provided by `shardtree` is sufficient to allow
100-block scan ranges throughout the sandblasted range, and limiting to
10 blocks results in significant overhead.
A future release will switch to an adaptive strategy which can
dynamically adjust download and scan range sizes based upon observed
output counts and scanning times to provide consistent throughput.
- more comments resolved
- totalProgressRange removed from the SDK
- ScanRange now takes into account the given value and properly initializes, + added tests
- tests fixed
- CompactBlockProgress has been update to use syncProgress only
- CompactBlockProgressUpdate removed
- BlockProgress removed
- enhance and fetch progresses removed
- progressPartialUpdate refactored to syncProgress
- tests updated
- getScanProgress used for reporting of the syncing progress
[#1238] Report sync progress with the new getScanProgress
- comment added
[#1238] Report sync progress with the new getScanProgress (#1239)
- TODOs + offline tests fixed
- concept of linear syncing fully removed from the SDK, it's fully replaced with Spend-before-Sync
- BlockDAO - table blocks is no longer used, removed from the SDK and all it's associated getLastBlocks/ScannedHeights as with it
- concept of pending transactions removed from the SDK
- unit tests refactored
- the computation of progress changed, the total range is computed, that way it works for any kind of sync algorithm
- the progress depends on finished scan action, whenever it processes some blocks, it's counted up
- the final progress is a ratio between these new values
- cleaned up the code
- ScanAlgorithm enum added to the SDK
- preferred sync algorithm set to .linear as default but can be changed to Spend before Sync as the Initializer.init parameter
[#1188] Working prototype of SbS
- error codes for failure states in the SbS State Machine changes added
[#1188] Working prototype of SbS (#1192)
- offline tests fixed
- initial action in place
- verify loop WIP
[#1169] Step 5 -Get the suggested scan ranges from the wallet database
- firstUnenhancedHeight fix
[#1169] Step 5 -Get the suggested scan ranges from the wallet database
- first working version implemented
- download, scan and enhance actions are dependent on the context values only
- `BlockDownloaderImpl` is changed. It now spawns detached Task to
download blocks. So blocks can be downloaded in parallel with scanning
process.
- `Synchronizer.stop()` is no longer async.
- Blocks cache cleaning is changed. It's not possible to drop the whole
cache now. There are some blocks pre-downloaded which weren't scanned
yet.
- attached to the processor's timer
- added latest scanned time and latest block height
- sample app showing the new values alongside with the %
- unit tests fixed
- latestBlock() API added
- the transaction repository is no longer used to update the exposed values during the syncing
Closes#888.
- `ZcashRustBackend` is actor now. So majority of methods in this actor
are now async.
- Some methods stayed `static` in `ZcashRustBackend`. It would be hard
to pass instance of the `ZcashRustBackend` to the places where these
methods are used in static manner. And it would change lot of APIs.
But it isn't problem from technical perspective because these methods
would be `nonisolated` otherwise.
- Methods `lastError()` and `getLastError()` in `ZcashRustBackend` are
now private. This makes sure that ther won't be aby race condition
between other methods and these two error methods.
- All the methods for which was `lastError()` used in code now throw
error. So `lastError()` is no longer needed outside of the
`ZcashRustBackend`.
- There are in the public API related to `DerivationTool`.
- `DerivationTool` now requires instance of the `ZcashRustBackend`. And
`ZcashRustBackend` isn't public type. So `DerivationTool` doesn't have
any public constructor now. It can be created only via
`Initializer.makeDerivationTool()` instance method.
- `deriveUnifiedSpendingKey()` and `deriveUnifiedFullViewingKey()` in
`DerivationTool` are now async. It is because these are using
`ZcashRustBackend` inside. `DerivationTool` offers alternative
(closure and combine) APIs. But downside is that there is no sync API
to dervie spending key or viewing key.
- Some methods of the `DerivationTool` are now static. These methods
don't use anything that requires instance of the `DerivationTool`
inside.
[#888] Use Sourcery to generate mocks
- I wrote mock for `Synchronizer` manually. And it's tedious and long
and boring work.
- Now `ZcashRustBackendWelding` is changed a lot so it means
`MockRustBackend` must be changed a lot. So I decided to introduce
`sourcery` to generate mocks from protocols so we don't have to do it
manually ever.
- To generate mocks go to `ZcashLightClientKit/Tests/TestUtils/Sourcery`
directory and run `generateMocks.sh` script.
- Your protocol must be mentioned in `AutoMockable.swift` file.
Generated mocks are in `AutoMockable.generated.swift` file.
[#888] Fix Offline tests
- Offline tests target now runs and tests are green.
- There is log of changes in tests. But logic is not changed.
- Updated `AutoMockable.stencil` so sourcery is able to generate mock as
actor when protocol is marked with: `// sourcery: mockActor`.
- Last few updates in `ZcashRustBackendWelding`. In previous PR `rewindCacheToHeight`
methods was overlooked and it didn't throw error.
- Removed `MockRustBackend` and using generated
`ZCashRustBackendWeldingMock` instead.
- Using generated `SynchronizerMock`.
[#888] Fix NetworkTests
- Changed a bit how rust backend mock is used in the tests. Introduced
`RustBackendMockHelper`. There are some state variables that must be
preserved within one instance of the mock. This helper does exactly
this. It keeps this state variables in the memory and helping mock to
work as expected.
[#888] Fix Darkside tests
Create ZcashKeyDeriving internal protocol
Use New DerivationTool that does not require RustBackend
Remove duplicated methods that had been copied over
[#888] Fix potentially broken tests
I broke the tests because I moved `testTempDirectory` from each
`TestCase` to the `Environment`. By this I caused that each tests uses
exactly same URL. Which is directly against purpose of
`testTempDirectory`.
So now each test calls this one and store it to local variable. So each
test has unique URL.
[#888] Add ability to mock nonisolated methods to AutoMockable.stencil
[#888] Add changelog and fix the documentation in ZcashRustBackendWelding
[#888] Rename derivation rust backend protocol and remove static methods
- Renamed `ZcashKeyDeriving` to `ZcashKeyDerivationBackendWelding`. So
the naming scheme is same as for `ZcashRustBackendWelding`.
- `ZcashKeyDerivationBackend` is now struct instead of enum.
- Methods in `ZcashKeyDerivationBackendWelding` (except one) are no
longer static. Because of this the respective methods in
`DerivationTool` aren't also static anymore.
Closes#469.
- Methods defined in `ZcashRustBackendWelding` protocol which are doing
some IO operations are now async.
- `Initializer` no longer have methods to get balance. Only
`Synchronizer` now have these methods. These methods are newly async.
And `Initilializer` doesn't have alternative APIs.
- There is lot of changes in tests but those are mostly adding `await`.
No logic is changed.
Closes#484.
- `TransactionRepository` has async API. `Synchronizer` and alternative
APIs are updated accordingly.
These methods and properties in the `Synchronizer` are async now:
- `cancelSpend(transaction:)`
- All the variants of the `getMemos(for:)` method.
- All the variants fo the `getRecipients(for:)` method.
- `allConfirmedTransactions(from:limit:)`
- `pendingTransactions`
- `clearedTransactions`
- `sentTransactions`
- `receivedTransactions`
Closes#209.
[#845] Introduce ZcashSynchronizerAlias enum
Closes#845.
[#852] SDKSynchronizer using queues label based on the alias
Closes#852.
[#847] Remove posibility to use DatabaseStorageManager as singleton
Closes#847.
[#850] Remove synchronizerConnectionStateChanged notification
Closes#850.
[#855] Add check if the Alias is already used
Closes#855
- Added `UsedAliasesChecker` utility which is used to register aliases
that are in use.
- `prepare()` and `wipe()` methods now check if the current alias can't
be used and if not then `InitializerError.aliasAlreadyInUse` is
thrown/emitted.
- Some public methods that could cause harm if used with the Alias that
is already in use now throw `SynchronizerError.notPrepared`. Thanks to
this the client app is forced to call `prepare()` first. And
`prepare()` does check for the Alias.
- Added tests for new conditions.
[#849] Make InternalSyncProgress aware of the Alias
Closes#849.
[#853] Only instance with default Alias migrates legacy cache DB
Closes#853.
[#851] Apply the Alias to the URLs
Closes#851.
- `Initializer` now updates paths according to alias before paths are
used anywhere in the SDK.
- Paths update can fail. It would be incovenient for the client apps to
handle errors thrown from `Initiliazer` constructor. So the error is
then handled in `SDKSynchronizer.prepare()` or `SDKSynchronizer.wipe()`.
[#846] Stop using SDKMetrics as singleton (#862)
- metrics are not longer a singleton
- tests fixed
- metrics outside init of the synchronizer
[#848] Make logger aware of the alias
- logger is now an instance passed throughout the sdk instead of a static proxy
[#848] Make logger aware of the alias (#868)
- comments addressed
[#848] Make logger aware of the alias (#868)
- returning protocol back
Fix typos
[#856] Add possibility to test multiple synchronizers in the sample app
Closes#856.
- Added `alias` property to `Synchronizer`.
- Added `SyncBlocksListViewController` which provides UI to use multiple
synchronizers at once.
[#209] Add changelog
- Add changelog for #209.
- Overall improve readability of the rendered changelog. Tickets
references are now prefixed with `###` instead of `- `.
Fix compilation
Jack Grigg
Lukas Korba
Kris Nuttycombe
Michal Fousek
Francisco Gindre
Lukas Korba