diff --git a/ip_cores/blake2b/scripts/create_project.tcl b/ip_cores/blake2b/scripts/create_project.tcl
new file mode 100644
index 0000000..691742a
--- /dev/null
+++ b/ip_cores/blake2b/scripts/create_project.tcl
@@ -0,0 +1,519 @@
+#*****************************************************************************************
+# Vivado (TM) v2018.3 (64-bit)
+#
+# create_project.tcl: Tcl script for re-creating project 'blake2b'
+#
+# Generated by Vivado on Wed Feb 13 16:57:58 -0500 2019
+# IP Build 2404404 on Fri Dec  7 01:43:56 MST 2018
+#
+# This file contains the Vivado Tcl commands for re-creating the project to the state*
+# when this script was generated. In order to re-create the project, please source this
+# file in the Vivado Tcl Shell.
+#
+# * Note that the runs in the created project will be configured the same way as the
+#   original project, however they will not be launched automatically. To regenerate the
+#   run results please launch the synthesis/implementation runs as needed.
+#
+#*****************************************************************************************
+# NOTE: In order to use this script for source control purposes, please make sure that the
+#       following files are added to the source control system:-
+#
+# 1. This project restoration tcl script (create_project.tcl) that was generated.
+#
+# 2. The following source(s) files that were local or imported into the original project.
+#    (Please see the '$orig_proj_dir' and '$origin_dir' variable setting below at the start of the script)
+#
+#    <none>
+#
+# 3. The following remote source files that were added to the original project:-
+#
+#    "C:/Users/bsdevlin/git/zcash-fpga/ip_cores/blake2b/src/rtl/blake2b_g.sv"
+#    "C:/Users/bsdevlin/git/zcash-fpga/ip_cores/blake2b/src/rtl/blake2b_pkg.sv"
+#    "C:/Users/bsdevlin/git/zcash-fpga/ip_cores/common/src/rtl/common_pkg.sv"
+#    "C:/Users/bsdevlin/git/zcash-fpga/ip_cores/common/src/rtl/common_if.sv"
+#    "C:/Users/bsdevlin/git/zcash-fpga/ip_cores/blake2b/src/rtl/blake2b_top.sv"
+#    "C:/Users/bsdevlin/git/zcash-fpga/ip_cores/blake2b/synth/blake2b_top.xdc"
+#    "C:/Users/bsdevlin/git/zcash-fpga/ip_cores/blake2b/src/tb/blake2b_top_tb.sv"
+#
+#*****************************************************************************************
+
+# Set the reference directory for source file relative paths (by default the value is script directory path)
+set script_path [ file dirname [ file normalize [ info script ] ] ]
+puts $script_path
+set origin_dir $script_path
+
+# Set the project name
+set _xil_proj_name_ "blake2b"
+
+# Use project name variable, if specified in the tcl shell
+if { [info exists ::user_project_name] } {
+  set _xil_proj_name_ $::user_project_name
+}
+
+variable script_file
+set script_file "create_project.tcl"
+
+if { $::argc > 0 } {
+  for {set i 0} {$i < $::argc} {incr i} {
+    set option [string trim [lindex $::argv $i]]
+    switch -regexp -- $option {
+      "--origin_dir"   { incr i; set origin_dir [lindex $::argv $i] }
+      "--project_name" { incr i; set _xil_proj_name_ [lindex $::argv $i] }
+      "--help"         { print_help }
+      default {
+        if { [regexp {^-} $option] } {
+          puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"
+          return 1
+        }
+      }
+    }
+  }
+}
+
+# Set the directory path for the original project from where this script was exported
+set orig_proj_dir "[file normalize "$origin_dir/../proj"]"
+
+# Create project
+create_project ${_xil_proj_name_} $origin_dir/../proj/ -part xcvu9p-flga2104-2L-e
+
+# Set the directory path for the new project
+set proj_dir [get_property directory [current_project]]
+
+# Set project properties
+set obj [current_project]
+set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
+set_property -name "dsa.accelerator_binary_content" -value "bitstream" -objects $obj
+set_property -name "dsa.accelerator_binary_format" -value "xclbin2" -objects $obj
+set_property -name "dsa.description" -value "Vivado generated DSA" -objects $obj
+set_property -name "dsa.dr_bd_base_address" -value "0" -objects $obj
+set_property -name "dsa.emu_dir" -value "emu" -objects $obj
+set_property -name "dsa.flash_interface_type" -value "bpix16" -objects $obj
+set_property -name "dsa.flash_offset_address" -value "0" -objects $obj
+set_property -name "dsa.flash_size" -value "1024" -objects $obj
+set_property -name "dsa.host_architecture" -value "x86_64" -objects $obj
+set_property -name "dsa.host_interface" -value "pcie" -objects $obj
+set_property -name "dsa.num_compute_units" -value "60" -objects $obj
+set_property -name "dsa.platform_state" -value "pre_synth" -objects $obj
+set_property -name "dsa.vendor" -value "xilinx" -objects $obj
+set_property -name "dsa.version" -value "0.0" -objects $obj
+set_property -name "enable_vhdl_2008" -value "1" -objects $obj
+set_property -name "ip_cache_permissions" -value "read write" -objects $obj
+set_property -name "ip_output_repo" -value "$proj_dir/${_xil_proj_name_}.cache/ip" -objects $obj
+set_property -name "mem.enable_memory_map_generation" -value "1" -objects $obj
+set_property -name "part" -value "xcvu9p-flga2104-2L-e" -objects $obj
+set_property -name "sim.central_dir" -value "$proj_dir/${_xil_proj_name_}.ip_user_files" -objects $obj
+set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj
+set_property -name "simulator_language" -value "Mixed" -objects $obj
+
+# Create 'sources_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sources_1] ""]} {
+  create_fileset -srcset sources_1
+}
+
+# Set 'sources_1' fileset object
+set obj [get_filesets sources_1]
+set files [list \
+ [file normalize "${origin_dir}/../src/rtl/blake2b_g.sv"] \
+ [file normalize "${origin_dir}/../src/rtl/blake2b_pkg.sv"] \
+ [file normalize "${origin_dir}/../../common/src/rtl/common_pkg.sv"] \
+ [file normalize "${origin_dir}/../../common/src/rtl/common_if.sv"] \
+ [file normalize "${origin_dir}/../src/rtl/blake2b_top.sv"] \
+]
+add_files -norecurse -fileset $obj $files
+
+# Set 'sources_1' fileset file properties for remote files
+set file "$origin_dir/../src/rtl/blake2b_g.sv"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "SystemVerilog" -objects $file_obj
+
+set file "$origin_dir/../src/rtl/blake2b_pkg.sv"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "SystemVerilog" -objects $file_obj
+
+set file "$origin_dir/../../common/src/rtl/common_pkg.sv"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "SystemVerilog" -objects $file_obj
+
+set file "$origin_dir/../../common/src/rtl/common_if.sv"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "SystemVerilog" -objects $file_obj
+
+set file "$origin_dir/../src/rtl/blake2b_top.sv"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "SystemVerilog" -objects $file_obj
+
+
+# Set 'sources_1' fileset file properties for local files
+# None
+
+# Set 'sources_1' fileset properties
+set obj [get_filesets sources_1]
+set_property -name "top" -value "blake2b_top" -objects $obj
+
+# Create 'constrs_1' fileset (if not found)
+if {[string equal [get_filesets -quiet constrs_1] ""]} {
+  create_fileset -constrset constrs_1
+}
+
+# Set 'constrs_1' fileset object
+set obj [get_filesets constrs_1]
+
+# Add/Import constrs file and set constrs file properties
+set file "[file normalize "$origin_dir/../synth/blake2b_top.xdc"]"
+set file_added [add_files -norecurse -fileset $obj [list $file]]
+set file "$origin_dir/../synth/blake2b_top.xdc"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
+set_property -name "file_type" -value "XDC" -objects $file_obj
+
+# Set 'constrs_1' fileset properties
+set obj [get_filesets constrs_1]
+set_property -name "target_part" -value "xcvu9p-flga2104-2L-e" -objects $obj
+
+# Create 'sim_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sim_1] ""]} {
+  create_fileset -simset sim_1
+}
+
+# Set 'sim_1' fileset object
+set obj [get_filesets sim_1]
+set files [list \
+ [file normalize "${origin_dir}/../src/tb/blake2b_top_tb.sv"] \
+]
+add_files -norecurse -fileset $obj $files
+
+# Set 'sim_1' fileset file properties for remote files
+set file "$origin_dir/../src/tb/blake2b_top_tb.sv"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
+set_property -name "file_type" -value "SystemVerilog" -objects $file_obj
+
+
+# Set 'sim_1' fileset file properties for local files
+# None
+
+# Set 'sim_1' fileset properties
+set obj [get_filesets sim_1]
+set_property -name "top" -value "blake2b_top_tb" -objects $obj
+set_property -name "top_lib" -value "xil_defaultlib" -objects $obj
+
+# Set 'utils_1' fileset object
+set obj [get_filesets utils_1]
+# Empty (no sources present)
+
+# Set 'utils_1' fileset properties
+set obj [get_filesets utils_1]
+
+# Create 'synth_1' run (if not found)
+if {[string equal [get_runs -quiet synth_1] ""]} {
+    create_run -name synth_1 -part xcvu9p-flga2104-2L-e -flow {Vivado Synthesis 2018} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1
+} else {
+  set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
+  set_property flow "Vivado Synthesis 2018" [get_runs synth_1]
+}
+set obj [get_runs synth_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Synthesis Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'synth_1_synth_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {
+  create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1
+}
+set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "synth_1_synth_report_utilization_0" -objects $obj
+
+}
+set obj [get_runs synth_1]
+set_property -name "part" -value "xcvu9p-flga2104-2L-e" -objects $obj
+set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj
+
+# set the current synth run
+current_run -synthesis [get_runs synth_1]
+
+# Create 'impl_1' run (if not found)
+if {[string equal [get_runs -quiet impl_1] ""]} {
+    create_run -name impl_1 -part xcvu9p-flga2104-2L-e -flow {Vivado Implementation 2018} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
+} else {
+  set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
+  set_property flow "Vivado Implementation 2018" [get_runs impl_1]
+}
+set obj [get_runs impl_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Implementation Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'impl_1_init_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "display_name" -value "impl_1_init_report_timing_summary_0" -objects $obj
+
+}
+# Create 'impl_1_opt_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {
+  create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_opt_report_drc_0" -objects $obj
+
+}
+# Create 'impl_1_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "display_name" -value "impl_1_opt_report_timing_summary_0" -objects $obj
+
+}
+# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "display_name" -value "impl_1_power_opt_report_timing_summary_0" -objects $obj
+
+}
+# Create 'impl_1_place_report_io_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_place_report_io_0" -objects $obj
+
+}
+# Create 'impl_1_place_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_place_report_utilization_0" -objects $obj
+
+}
+# Create 'impl_1_place_report_control_sets_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_place_report_control_sets_0" -objects $obj
+
+}
+# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "display_name" -value "impl_1_place_report_incremental_reuse_0" -objects $obj
+
+}
+# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {
+  create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "display_name" -value "impl_1_place_report_incremental_reuse_1" -objects $obj
+
+}
+# Create 'impl_1_place_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "display_name" -value "impl_1_place_report_timing_summary_0" -objects $obj
+
+}
+# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "display_name" -value "impl_1_post_place_power_opt_report_timing_summary_0" -objects $obj
+
+}
+# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "display_name" -value "impl_1_phys_opt_report_timing_summary_0" -objects $obj
+
+}
+# Create 'impl_1_route_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_route_report_drc_0" -objects $obj
+
+}
+# Create 'impl_1_route_report_methodology_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_route_report_methodology_0" -objects $obj
+
+}
+# Create 'impl_1_route_report_power_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_route_report_power_0" -objects $obj
+
+}
+# Create 'impl_1_route_report_route_status_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_route_report_route_status_0" -objects $obj
+
+}
+# Create 'impl_1_route_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_route_report_timing_summary_0" -objects $obj
+
+}
+# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_route_report_incremental_reuse_0" -objects $obj
+
+}
+# Create 'impl_1_route_report_clock_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_route_report_clock_utilization_0" -objects $obj
+
+}
+# Create 'impl_1_route_report_bus_skew_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_route_report_bus_skew_0" -objects $obj
+
+}
+# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_post_route_phys_opt_report_timing_summary_0" -objects $obj
+
+}
+# Create 'impl_1_post_route_phys_opt_report_bus_skew_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0] "" ] } {
+  create_report_config -report_name impl_1_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0]
+if { $obj != "" } {
+set_property -name "display_name" -value "impl_1_post_route_phys_opt_report_bus_skew_0" -objects $obj
+
+}
+set obj [get_runs impl_1]
+set_property -name "part" -value "xcvu9p-flga2104-2L-e" -objects $obj
+set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj
+set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
+
+# set the current impl run
+current_run -implementation [get_runs impl_1]
+
+puts "INFO: Project created:${_xil_proj_name_}"
+set obj [get_dashboards default_dashboard]
+
+# Create 'drc_1' gadget (if not found)
+if {[string equal [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "drc_1" ] ] ""]} {
+create_dashboard_gadget -name {drc_1} -type drc
+}
+set obj [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "drc_1" ] ]
+set_property -name "reports" -value "impl_1#impl_1_route_report_drc_0" -objects $obj
+
+# Create 'methodology_1' gadget (if not found)
+if {[string equal [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "methodology_1" ] ] ""]} {
+create_dashboard_gadget -name {methodology_1} -type methodology
+}
+set obj [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "methodology_1" ] ]
+set_property -name "reports" -value "impl_1#impl_1_route_report_methodology_0" -objects $obj
+
+# Create 'power_1' gadget (if not found)
+if {[string equal [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "power_1" ] ] ""]} {
+create_dashboard_gadget -name {power_1} -type power
+}
+set obj [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "power_1" ] ]
+set_property -name "reports" -value "impl_1#impl_1_route_report_power_0" -objects $obj
+
+# Create 'timing_1' gadget (if not found)
+if {[string equal [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "timing_1" ] ] ""]} {
+create_dashboard_gadget -name {timing_1} -type timing
+}
+set obj [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "timing_1" ] ]
+set_property -name "reports" -value "impl_1#impl_1_route_report_timing_summary_0" -objects $obj
+
+# Create 'utilization_1' gadget (if not found)
+if {[string equal [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "utilization_1" ] ] ""]} {
+create_dashboard_gadget -name {utilization_1} -type utilization
+}
+set obj [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "utilization_1" ] ]
+set_property -name "reports" -value "synth_1#synth_1_synth_report_utilization_0" -objects $obj
+set_property -name "run.step" -value "synth_design" -objects $obj
+set_property -name "run.type" -value "synthesis" -objects $obj
+
+# Create 'utilization_2' gadget (if not found)
+if {[string equal [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "utilization_2" ] ] ""]} {
+create_dashboard_gadget -name {utilization_2} -type utilization
+}
+set obj [get_dashboard_gadgets -of_objects [get_dashboards default_dashboard] [ list "utilization_2" ] ]
+set_property -name "reports" -value "impl_1#impl_1_place_report_utilization_0" -objects $obj
+
+move_dashboard_gadget -name {utilization_1} -row 0 -col 0
+move_dashboard_gadget -name {power_1} -row 1 -col 0
+move_dashboard_gadget -name {drc_1} -row 2 -col 0
+move_dashboard_gadget -name {timing_1} -row 0 -col 1
+move_dashboard_gadget -name {utilization_2} -row 1 -col 1
+move_dashboard_gadget -name {methodology_1} -row 2 -col 1
+# Set current dashboard to 'default_dashboard' 
+current_dashboard default_dashboard