2021-03-04 12:30:25 -08:00
|
|
|
name: Zcashd Manual Deploy
|
|
|
|
|
|
|
|
on:
|
|
|
|
workflow_dispatch:
|
|
|
|
inputs:
|
|
|
|
network:
|
refactor(test): dockerize tests and run sync in detached mode (#3459)
* refactor (cd): overall pipeline improvement
- Use a more ENV configurable Dockerfile
- Remove cloudbuild dependency
- Use compute optimized machine types
- Use SSD instead of normal hard drives
- Move Sentry endpoint to secrets
- Use a single yml for auto & manual deploy
- Migrate to Google Artifact Registry
* refactor (cd): overall pipeline improvement
- Use a more ENV configurable Dockerfile
- Remove cloudbuild dependency
- Use compute optimized machine types
- Use SSD instead of normal hard drives
- Move Sentry endpoint to secrets
- Use a single yml for auto & manual deploy
- Migrate to Google Artifact Registry
* refactor (cd): use newer google auth action
* fix (cd): use newer secret as gcp credential
* fix (docker): do not create extra directories
* fix (docker): ignore .github for caching purposes
* fix (docker): use latest rust
* fix (cd): bump build timeout
* fix: use a better name for manual deployment
* refactor (docker): use standard directories for executable
* fix (cd): most systems expect a "latest" tag
Caching from the latest image is one of the main reasons to add this extra tag. Before this commit, the inline cache was not being used.
* fix (cd): push the build image and the cache separately
The inline cache exporter only supports `min` cache mode. To enable `max` cache mode, push the image and the cache separately by using the registry cache exporter.
This also allows for smaller release images.
* fix (cd): remove unused GHA cache
We're leveraging the registry to cache the actions, instead of using the 10GB limits from Github Actions cache storage
* refactor (cd): use cargo-chef for caching rust deps
* fix: move build system deps before cargo cheg cook
* fix (release): use newer debian to reduce vulnerabilities
* fix (cd): use same zone, region and service accounts
* fix (cd): use same disk size and type for all deployments
* refactor (cd): activate interactive shells
Use interactive shells for manual and test deployments. This allow greater flexibility if troubleshooting is needed inside the machines
* refactor (test): use docker artifact from registry
Instead of using a VM to SSH into in to build and test. Build in GHA (to have the logs available), run the workspace tests in GHA, and just run the sync tests in GCP
Use a cintainer VM with zebra's image directly on it, and pass the needed parameters to run the Sync past mandatory checkpoint.
* tmp (cd): bump timeout for building from scratch
* tmp (test): bump build time
* fix (cd, test): bump build time-out to 210 minutes
* fix (docker): do not build with different settings
Compiling might be slow because different steps are compiling the same code 2-4 times because of the variations
* revert (docker): do not fix the rust version
* fix (docker): build on the root directory
* refactor(docker): Use base image commands and tools
* fix (cd): use correct variables & values, add build concurrency
* fix(cd): use Mainnet instead of mainnet
* imp: remove checkout as Buildkit uses the git context
* fix (docker): just Buildkit uses a .dockerignore in a path
* imp (cd): just use needed variables in the right place
* imp (cd): do not checkout if not needed
* test: run on push
* refactor(docker): reduce build changes
* fix(cd): not checking out was limiting some variables
* refactor(test): add an multistage exclusive for testing
* fix(cd): remove tests as a runtime dependency
* fix(cd): use default service account with cloud-platform scope
* fix(cd): revert checkout actions
* fix: use GA c2 instead of Preview c2d machine types
* fix(actions): remove workflow_dispatch from patched actions
This causes GitHub confusion as it can't determined which of the actions using workflow_dispatch is the right one
* fix(actions): remove patches from push actions
* test: validate changes on each push
* fix(test): wrong file syntax on test job
* fix(test): add missing env parameters
* fix(docker): Do not rebuild to download params and run tests
* fix(test): setup gcloud and loginto artifact just when needed
Try not to rebuild the tests
* fix(test): use GCP container to sync past mandatory checkpoint
* fix(test): missing separators
* test
* fix(test): mount the available disk
* push
* refactor(test): merge disk regeneration into test.yml
* fix(cd): minor typo fixes
* fix(docker): rebuild on .github changes
* fix(cd): keep compatibility with gcr.io
To prevent conflicts between registries, and migrate when the time is right, we'll keep pushing to both registries and use github actions cache to prevent conflicts between artifacts.
* fix(cd): typo and scope
* fix(cd): typos everywhere
* refactor(test): use smarter docker wait and keep old registry
* fix(cd): do not constraint the CPUs for bigger machines
* revert(cd): reduce PR diff as there's a separate one for tests
* fix(docker): add .github as it has no impact on caching
* fix(test): run command correctly
* fix(test): wiat and create image if previous step succeded
* force rebuild
* fix(test): do not restrict interdependant steps based on event
* force push
* feat(docker): add google OS Config agent
Use a separate step to have better flexibility in case a better approach is available
* fix(test): remove all hardoced values and increase disks
* fix(test): use correct commands on deploy
* fix(test): use args as required by google
* fix(docker): try not to invalidate zebrad download cache
* fix(test): minor typo
* refactor(test): decouple jobs for better modularity
This also allows faster tests as testing Zunstable won't be a dependency and it can't stop already started jobs if it fails.
* fix(test): Do not try to execute ss and commands in one line
* fix(test): do not show undeeded information in the terminal
* fix(test): sleep befor/after machine creation/deletion
* fix(docker): do not download zcash params twice
* feat(docker): add google OS Config agent
Use a separate step to have better flexibility in case a better approach is available
* merge: docker-actions-refactor into docker-test-refactor
* test docker wait scenarios
* fix(docker): $HOME variables is not being expanded
* fix(test): allow docker wait to work correctly
* fix(docker): do not use variables while using COPY
* fix(docker): allow to use zebrad as a command
* fix(cd): use test .yml from main
* fix(cd): Do not duplicate network values
The Dockerfile has an ARG with a default value of 'Mainnet', if this value is changed it will be done manually on a workflow_dispatch, making the ENV option a uneeded duplicate in this workflow
* fix(test): use bigger machine type for compute intensive tasks
* refactor(test): add tests in CI file
* fix(test): remove duplicated tests
* fix(test): typo
* test: build on .github changes temporarily
* fix(test): bigger machines have no effect on sync times
* feat: add an image to inherit from with zcash params
* fix(cd): use the right image name and allow push to test
* fix(cd): use the right docker target and remove extra builds
* refactor(docker): use cached zcash params from previous build
* fix(cd): finalize for merging
* imp(cd): add double safety measure for production
* fix(cd): use specific SHA for containers
* fix(cd): use latest gcloud action version
* fix(test): use the network as Mainnet and remove the uppercase from tests
* fix(test): run disk regeneration on specific file change
Just run this regeneration when changing the following files:
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/service/finalized_state/disk_format.rs
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/service/finalized_state.rs
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/constants.rs
* refactor(test): seggregate disks regeneration from tests
Allow to regenerate disks without running tests, and to run tests from previous disk regeneration.
Disk will be regenerated just if specific files were changed, or triggered manually.
Tests will run just if a disk regeneration was not manually triggered.
* fix(test): gcp disks require lower case conventions
* fix(test): validate logs being emmited by docker
GHA is transforming is somehow transforwing the variable to lowercase also, so we're changint it to adapt to it
* test
* fix(test): force tty terminal
* fix(test): use a one line command to test terminal output
* fix(test): always delete test instance
* fix(test): use short SHA from the PR head
Using the SHA from the base, creates confusion and it's not accurate with the SHA being shown and used on GitHub.
We have to keep both as manual runs with `workflow_dispatch` does not have a PR SHA
* fix(ci): do not trigger CI on docker changes
There's no impact in this workflow when a change is done in the dockerfile
* Instead of runing cargo test when the instance gets created, run this commands afterwards in a different step.
As GHA TTY is not working as expected, and workarounds does not play nicely with `gcloud compute ssh` actions/runner#241 (comment) we decided to get the container name from the logs, log directly to the container and run the cargo command from there.
* doc(test): document reasoning for new steps
* fix(test): increase machine type and ssh timeout
* fix(test): run tests on creation and follow container logs
This allows to follow logs in Github Actions terminal, while the GCP container is still running.
Just delete the instance when following the logs ends successfully or fails
* finalize(test): do not rebuild image when changing actions
* fix(test): run tests on creation and follow container logs
This allows to follow logs in Github Actions terminal, while the GCP container is still running.
Just delete the instance when following the logs ends successfully or fails
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
2022-02-15 16:54:16 -08:00
|
|
|
default: 'Testnet'
|
2021-03-04 12:30:25 -08:00
|
|
|
size:
|
|
|
|
default: 10
|
|
|
|
|
|
|
|
env:
|
2022-03-18 14:25:35 -07:00
|
|
|
PROJECT_ID: zealous-zebra
|
2021-03-05 11:37:54 -08:00
|
|
|
REGION: us-central1
|
refactor(test): dockerize tests and run sync in detached mode (#3459)
* refactor (cd): overall pipeline improvement
- Use a more ENV configurable Dockerfile
- Remove cloudbuild dependency
- Use compute optimized machine types
- Use SSD instead of normal hard drives
- Move Sentry endpoint to secrets
- Use a single yml for auto & manual deploy
- Migrate to Google Artifact Registry
* refactor (cd): overall pipeline improvement
- Use a more ENV configurable Dockerfile
- Remove cloudbuild dependency
- Use compute optimized machine types
- Use SSD instead of normal hard drives
- Move Sentry endpoint to secrets
- Use a single yml for auto & manual deploy
- Migrate to Google Artifact Registry
* refactor (cd): use newer google auth action
* fix (cd): use newer secret as gcp credential
* fix (docker): do not create extra directories
* fix (docker): ignore .github for caching purposes
* fix (docker): use latest rust
* fix (cd): bump build timeout
* fix: use a better name for manual deployment
* refactor (docker): use standard directories for executable
* fix (cd): most systems expect a "latest" tag
Caching from the latest image is one of the main reasons to add this extra tag. Before this commit, the inline cache was not being used.
* fix (cd): push the build image and the cache separately
The inline cache exporter only supports `min` cache mode. To enable `max` cache mode, push the image and the cache separately by using the registry cache exporter.
This also allows for smaller release images.
* fix (cd): remove unused GHA cache
We're leveraging the registry to cache the actions, instead of using the 10GB limits from Github Actions cache storage
* refactor (cd): use cargo-chef for caching rust deps
* fix: move build system deps before cargo cheg cook
* fix (release): use newer debian to reduce vulnerabilities
* fix (cd): use same zone, region and service accounts
* fix (cd): use same disk size and type for all deployments
* refactor (cd): activate interactive shells
Use interactive shells for manual and test deployments. This allow greater flexibility if troubleshooting is needed inside the machines
* refactor (test): use docker artifact from registry
Instead of using a VM to SSH into in to build and test. Build in GHA (to have the logs available), run the workspace tests in GHA, and just run the sync tests in GCP
Use a cintainer VM with zebra's image directly on it, and pass the needed parameters to run the Sync past mandatory checkpoint.
* tmp (cd): bump timeout for building from scratch
* tmp (test): bump build time
* fix (cd, test): bump build time-out to 210 minutes
* fix (docker): do not build with different settings
Compiling might be slow because different steps are compiling the same code 2-4 times because of the variations
* revert (docker): do not fix the rust version
* fix (docker): build on the root directory
* refactor(docker): Use base image commands and tools
* fix (cd): use correct variables & values, add build concurrency
* fix(cd): use Mainnet instead of mainnet
* imp: remove checkout as Buildkit uses the git context
* fix (docker): just Buildkit uses a .dockerignore in a path
* imp (cd): just use needed variables in the right place
* imp (cd): do not checkout if not needed
* test: run on push
* refactor(docker): reduce build changes
* fix(cd): not checking out was limiting some variables
* refactor(test): add an multistage exclusive for testing
* fix(cd): remove tests as a runtime dependency
* fix(cd): use default service account with cloud-platform scope
* fix(cd): revert checkout actions
* fix: use GA c2 instead of Preview c2d machine types
* fix(actions): remove workflow_dispatch from patched actions
This causes GitHub confusion as it can't determined which of the actions using workflow_dispatch is the right one
* fix(actions): remove patches from push actions
* test: validate changes on each push
* fix(test): wrong file syntax on test job
* fix(test): add missing env parameters
* fix(docker): Do not rebuild to download params and run tests
* fix(test): setup gcloud and loginto artifact just when needed
Try not to rebuild the tests
* fix(test): use GCP container to sync past mandatory checkpoint
* fix(test): missing separators
* test
* fix(test): mount the available disk
* push
* refactor(test): merge disk regeneration into test.yml
* fix(cd): minor typo fixes
* fix(docker): rebuild on .github changes
* fix(cd): keep compatibility with gcr.io
To prevent conflicts between registries, and migrate when the time is right, we'll keep pushing to both registries and use github actions cache to prevent conflicts between artifacts.
* fix(cd): typo and scope
* fix(cd): typos everywhere
* refactor(test): use smarter docker wait and keep old registry
* fix(cd): do not constraint the CPUs for bigger machines
* revert(cd): reduce PR diff as there's a separate one for tests
* fix(docker): add .github as it has no impact on caching
* fix(test): run command correctly
* fix(test): wiat and create image if previous step succeded
* force rebuild
* fix(test): do not restrict interdependant steps based on event
* force push
* feat(docker): add google OS Config agent
Use a separate step to have better flexibility in case a better approach is available
* fix(test): remove all hardoced values and increase disks
* fix(test): use correct commands on deploy
* fix(test): use args as required by google
* fix(docker): try not to invalidate zebrad download cache
* fix(test): minor typo
* refactor(test): decouple jobs for better modularity
This also allows faster tests as testing Zunstable won't be a dependency and it can't stop already started jobs if it fails.
* fix(test): Do not try to execute ss and commands in one line
* fix(test): do not show undeeded information in the terminal
* fix(test): sleep befor/after machine creation/deletion
* fix(docker): do not download zcash params twice
* feat(docker): add google OS Config agent
Use a separate step to have better flexibility in case a better approach is available
* merge: docker-actions-refactor into docker-test-refactor
* test docker wait scenarios
* fix(docker): $HOME variables is not being expanded
* fix(test): allow docker wait to work correctly
* fix(docker): do not use variables while using COPY
* fix(docker): allow to use zebrad as a command
* fix(cd): use test .yml from main
* fix(cd): Do not duplicate network values
The Dockerfile has an ARG with a default value of 'Mainnet', if this value is changed it will be done manually on a workflow_dispatch, making the ENV option a uneeded duplicate in this workflow
* fix(test): use bigger machine type for compute intensive tasks
* refactor(test): add tests in CI file
* fix(test): remove duplicated tests
* fix(test): typo
* test: build on .github changes temporarily
* fix(test): bigger machines have no effect on sync times
* feat: add an image to inherit from with zcash params
* fix(cd): use the right image name and allow push to test
* fix(cd): use the right docker target and remove extra builds
* refactor(docker): use cached zcash params from previous build
* fix(cd): finalize for merging
* imp(cd): add double safety measure for production
* fix(cd): use specific SHA for containers
* fix(cd): use latest gcloud action version
* fix(test): use the network as Mainnet and remove the uppercase from tests
* fix(test): run disk regeneration on specific file change
Just run this regeneration when changing the following files:
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/service/finalized_state/disk_format.rs
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/service/finalized_state.rs
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/constants.rs
* refactor(test): seggregate disks regeneration from tests
Allow to regenerate disks without running tests, and to run tests from previous disk regeneration.
Disk will be regenerated just if specific files were changed, or triggered manually.
Tests will run just if a disk regeneration was not manually triggered.
* fix(test): gcp disks require lower case conventions
* fix(test): validate logs being emmited by docker
GHA is transforming is somehow transforwing the variable to lowercase also, so we're changint it to adapt to it
* test
* fix(test): force tty terminal
* fix(test): use a one line command to test terminal output
* fix(test): always delete test instance
* fix(test): use short SHA from the PR head
Using the SHA from the base, creates confusion and it's not accurate with the SHA being shown and used on GitHub.
We have to keep both as manual runs with `workflow_dispatch` does not have a PR SHA
* fix(ci): do not trigger CI on docker changes
There's no impact in this workflow when a change is done in the dockerfile
* Instead of runing cargo test when the instance gets created, run this commands afterwards in a different step.
As GHA TTY is not working as expected, and workarounds does not play nicely with `gcloud compute ssh` actions/runner#241 (comment) we decided to get the container name from the logs, log directly to the container and run the cargo command from there.
* doc(test): document reasoning for new steps
* fix(test): increase machine type and ssh timeout
* fix(test): run tests on creation and follow container logs
This allows to follow logs in Github Actions terminal, while the GCP container is still running.
Just delete the instance when following the logs ends successfully or fails
* finalize(test): do not rebuild image when changing actions
* fix(test): run tests on creation and follow container logs
This allows to follow logs in Github Actions terminal, while the GCP container is still running.
Just delete the instance when following the logs ends successfully or fails
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
2022-02-15 16:54:16 -08:00
|
|
|
ZONE: us-central1-a
|
|
|
|
MACHINE_TYPE: c2-standard-4
|
2021-03-04 12:30:25 -08:00
|
|
|
|
|
|
|
jobs:
|
|
|
|
deploy:
|
2021-03-05 20:51:48 -08:00
|
|
|
name: Deploy zcashd nodes
|
2021-03-04 12:30:25 -08:00
|
|
|
runs-on: ubuntu-latest
|
|
|
|
timeout-minutes: 30
|
2022-03-18 14:25:35 -07:00
|
|
|
permissions:
|
|
|
|
contents: 'read'
|
|
|
|
id-token: 'write'
|
refactor(test): dockerize tests and run sync in detached mode (#3459)
* refactor (cd): overall pipeline improvement
- Use a more ENV configurable Dockerfile
- Remove cloudbuild dependency
- Use compute optimized machine types
- Use SSD instead of normal hard drives
- Move Sentry endpoint to secrets
- Use a single yml for auto & manual deploy
- Migrate to Google Artifact Registry
* refactor (cd): overall pipeline improvement
- Use a more ENV configurable Dockerfile
- Remove cloudbuild dependency
- Use compute optimized machine types
- Use SSD instead of normal hard drives
- Move Sentry endpoint to secrets
- Use a single yml for auto & manual deploy
- Migrate to Google Artifact Registry
* refactor (cd): use newer google auth action
* fix (cd): use newer secret as gcp credential
* fix (docker): do not create extra directories
* fix (docker): ignore .github for caching purposes
* fix (docker): use latest rust
* fix (cd): bump build timeout
* fix: use a better name for manual deployment
* refactor (docker): use standard directories for executable
* fix (cd): most systems expect a "latest" tag
Caching from the latest image is one of the main reasons to add this extra tag. Before this commit, the inline cache was not being used.
* fix (cd): push the build image and the cache separately
The inline cache exporter only supports `min` cache mode. To enable `max` cache mode, push the image and the cache separately by using the registry cache exporter.
This also allows for smaller release images.
* fix (cd): remove unused GHA cache
We're leveraging the registry to cache the actions, instead of using the 10GB limits from Github Actions cache storage
* refactor (cd): use cargo-chef for caching rust deps
* fix: move build system deps before cargo cheg cook
* fix (release): use newer debian to reduce vulnerabilities
* fix (cd): use same zone, region and service accounts
* fix (cd): use same disk size and type for all deployments
* refactor (cd): activate interactive shells
Use interactive shells for manual and test deployments. This allow greater flexibility if troubleshooting is needed inside the machines
* refactor (test): use docker artifact from registry
Instead of using a VM to SSH into in to build and test. Build in GHA (to have the logs available), run the workspace tests in GHA, and just run the sync tests in GCP
Use a cintainer VM with zebra's image directly on it, and pass the needed parameters to run the Sync past mandatory checkpoint.
* tmp (cd): bump timeout for building from scratch
* tmp (test): bump build time
* fix (cd, test): bump build time-out to 210 minutes
* fix (docker): do not build with different settings
Compiling might be slow because different steps are compiling the same code 2-4 times because of the variations
* revert (docker): do not fix the rust version
* fix (docker): build on the root directory
* refactor(docker): Use base image commands and tools
* fix (cd): use correct variables & values, add build concurrency
* fix(cd): use Mainnet instead of mainnet
* imp: remove checkout as Buildkit uses the git context
* fix (docker): just Buildkit uses a .dockerignore in a path
* imp (cd): just use needed variables in the right place
* imp (cd): do not checkout if not needed
* test: run on push
* refactor(docker): reduce build changes
* fix(cd): not checking out was limiting some variables
* refactor(test): add an multistage exclusive for testing
* fix(cd): remove tests as a runtime dependency
* fix(cd): use default service account with cloud-platform scope
* fix(cd): revert checkout actions
* fix: use GA c2 instead of Preview c2d machine types
* fix(actions): remove workflow_dispatch from patched actions
This causes GitHub confusion as it can't determined which of the actions using workflow_dispatch is the right one
* fix(actions): remove patches from push actions
* test: validate changes on each push
* fix(test): wrong file syntax on test job
* fix(test): add missing env parameters
* fix(docker): Do not rebuild to download params and run tests
* fix(test): setup gcloud and loginto artifact just when needed
Try not to rebuild the tests
* fix(test): use GCP container to sync past mandatory checkpoint
* fix(test): missing separators
* test
* fix(test): mount the available disk
* push
* refactor(test): merge disk regeneration into test.yml
* fix(cd): minor typo fixes
* fix(docker): rebuild on .github changes
* fix(cd): keep compatibility with gcr.io
To prevent conflicts between registries, and migrate when the time is right, we'll keep pushing to both registries and use github actions cache to prevent conflicts between artifacts.
* fix(cd): typo and scope
* fix(cd): typos everywhere
* refactor(test): use smarter docker wait and keep old registry
* fix(cd): do not constraint the CPUs for bigger machines
* revert(cd): reduce PR diff as there's a separate one for tests
* fix(docker): add .github as it has no impact on caching
* fix(test): run command correctly
* fix(test): wiat and create image if previous step succeded
* force rebuild
* fix(test): do not restrict interdependant steps based on event
* force push
* feat(docker): add google OS Config agent
Use a separate step to have better flexibility in case a better approach is available
* fix(test): remove all hardoced values and increase disks
* fix(test): use correct commands on deploy
* fix(test): use args as required by google
* fix(docker): try not to invalidate zebrad download cache
* fix(test): minor typo
* refactor(test): decouple jobs for better modularity
This also allows faster tests as testing Zunstable won't be a dependency and it can't stop already started jobs if it fails.
* fix(test): Do not try to execute ss and commands in one line
* fix(test): do not show undeeded information in the terminal
* fix(test): sleep befor/after machine creation/deletion
* fix(docker): do not download zcash params twice
* feat(docker): add google OS Config agent
Use a separate step to have better flexibility in case a better approach is available
* merge: docker-actions-refactor into docker-test-refactor
* test docker wait scenarios
* fix(docker): $HOME variables is not being expanded
* fix(test): allow docker wait to work correctly
* fix(docker): do not use variables while using COPY
* fix(docker): allow to use zebrad as a command
* fix(cd): use test .yml from main
* fix(cd): Do not duplicate network values
The Dockerfile has an ARG with a default value of 'Mainnet', if this value is changed it will be done manually on a workflow_dispatch, making the ENV option a uneeded duplicate in this workflow
* fix(test): use bigger machine type for compute intensive tasks
* refactor(test): add tests in CI file
* fix(test): remove duplicated tests
* fix(test): typo
* test: build on .github changes temporarily
* fix(test): bigger machines have no effect on sync times
* feat: add an image to inherit from with zcash params
* fix(cd): use the right image name and allow push to test
* fix(cd): use the right docker target and remove extra builds
* refactor(docker): use cached zcash params from previous build
* fix(cd): finalize for merging
* imp(cd): add double safety measure for production
* fix(cd): use specific SHA for containers
* fix(cd): use latest gcloud action version
* fix(test): use the network as Mainnet and remove the uppercase from tests
* fix(test): run disk regeneration on specific file change
Just run this regeneration when changing the following files:
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/service/finalized_state/disk_format.rs
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/service/finalized_state.rs
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/constants.rs
* refactor(test): seggregate disks regeneration from tests
Allow to regenerate disks without running tests, and to run tests from previous disk regeneration.
Disk will be regenerated just if specific files were changed, or triggered manually.
Tests will run just if a disk regeneration was not manually triggered.
* fix(test): gcp disks require lower case conventions
* fix(test): validate logs being emmited by docker
GHA is transforming is somehow transforwing the variable to lowercase also, so we're changint it to adapt to it
* test
* fix(test): force tty terminal
* fix(test): use a one line command to test terminal output
* fix(test): always delete test instance
* fix(test): use short SHA from the PR head
Using the SHA from the base, creates confusion and it's not accurate with the SHA being shown and used on GitHub.
We have to keep both as manual runs with `workflow_dispatch` does not have a PR SHA
* fix(ci): do not trigger CI on docker changes
There's no impact in this workflow when a change is done in the dockerfile
* Instead of runing cargo test when the instance gets created, run this commands afterwards in a different step.
As GHA TTY is not working as expected, and workarounds does not play nicely with `gcloud compute ssh` actions/runner#241 (comment) we decided to get the container name from the logs, log directly to the container and run the cargo command from there.
* doc(test): document reasoning for new steps
* fix(test): increase machine type and ssh timeout
* fix(test): run tests on creation and follow container logs
This allows to follow logs in Github Actions terminal, while the GCP container is still running.
Just delete the instance when following the logs ends successfully or fails
* finalize(test): do not rebuild image when changing actions
* fix(test): run tests on creation and follow container logs
This allows to follow logs in Github Actions terminal, while the GCP container is still running.
Just delete the instance when following the logs ends successfully or fails
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
2022-02-15 16:54:16 -08:00
|
|
|
|
2021-03-04 12:30:25 -08:00
|
|
|
steps:
|
2022-03-08 19:38:38 -08:00
|
|
|
- uses: actions/checkout@v3.0.0
|
2021-05-16 16:32:38 -07:00
|
|
|
with:
|
|
|
|
persist-credentials: false
|
refactor (actions): make better use of variables, secrets and versions (#3393)
* style: use global variables and don't double print
Remove repeated instances of global environment variables. Do not print ENV variables on the terminal as GitHub Actions already shows it.
* fix (actions): Use fixed major versions for actions
As actions get recurrent fixes, using a specific version causes more maintance on the pipelines.
On the other hand, using @master versions could make some action unreliable, as breaking changes might be included without further notice, and even change behavior on a daily basis.
* refactor: make better use of ENV variables
A whole step with refex was being used to extract different variables from GitHub's environment. This gets depecrated in favor of using `rlespinasse/github-slug-action@v4` which has slug URL variables.
A SLUG on a variable will:
- put the variable content in lower case
- replace any character by - except 0-9, a-z, ., and _
- remove leading and trailing - character
- limit the string size to 63 characters
This changes also takes care of using the Head or Base branch for deployments. This will allow us tomerge of workflows, as most steps on this deployment actions are very similar, with little variations between workflows.
* fix (actions): use secrets for sensitive information
* revert: use specific versions for dependabot
Reverting commit 8c934099028e0651e464678c096d8d3815efe95c
2022-01-26 17:46:18 -08:00
|
|
|
|
|
|
|
- name: Inject slug/short variables
|
|
|
|
uses: rlespinasse/github-slug-action@v4
|
2022-03-21 16:07:01 -07:00
|
|
|
with:
|
|
|
|
short-length: 7
|
2021-03-04 12:30:25 -08:00
|
|
|
|
|
|
|
# Setup gcloud CLI
|
2022-03-18 14:25:35 -07:00
|
|
|
- name: Authenticate to Google Cloud
|
|
|
|
id: auth
|
|
|
|
uses: google-github-actions/auth@v0.6.0
|
2021-03-04 12:30:25 -08:00
|
|
|
with:
|
2022-03-18 14:25:35 -07:00
|
|
|
workload_identity_provider: 'projects/143793276228/locations/global/workloadIdentityPools/github-actions/providers/github-oidc'
|
|
|
|
service_account: 'github-service-account@zealous-zebra.iam.gserviceaccount.com'
|
|
|
|
token_format: 'access_token'
|
2021-03-04 12:30:25 -08:00
|
|
|
|
|
|
|
# Create instance template from container image
|
|
|
|
- name: Create instance template
|
|
|
|
run: |
|
2022-03-03 22:33:29 -08:00
|
|
|
gcloud compute instance-templates create-with-container zcashd-${{ env.GITHUB_REF_SLUG_URL }}-${{ env.GITHUB_SHA_SHORT }} \
|
refactor(test): dockerize tests and run sync in detached mode (#3459)
* refactor (cd): overall pipeline improvement
- Use a more ENV configurable Dockerfile
- Remove cloudbuild dependency
- Use compute optimized machine types
- Use SSD instead of normal hard drives
- Move Sentry endpoint to secrets
- Use a single yml for auto & manual deploy
- Migrate to Google Artifact Registry
* refactor (cd): overall pipeline improvement
- Use a more ENV configurable Dockerfile
- Remove cloudbuild dependency
- Use compute optimized machine types
- Use SSD instead of normal hard drives
- Move Sentry endpoint to secrets
- Use a single yml for auto & manual deploy
- Migrate to Google Artifact Registry
* refactor (cd): use newer google auth action
* fix (cd): use newer secret as gcp credential
* fix (docker): do not create extra directories
* fix (docker): ignore .github for caching purposes
* fix (docker): use latest rust
* fix (cd): bump build timeout
* fix: use a better name for manual deployment
* refactor (docker): use standard directories for executable
* fix (cd): most systems expect a "latest" tag
Caching from the latest image is one of the main reasons to add this extra tag. Before this commit, the inline cache was not being used.
* fix (cd): push the build image and the cache separately
The inline cache exporter only supports `min` cache mode. To enable `max` cache mode, push the image and the cache separately by using the registry cache exporter.
This also allows for smaller release images.
* fix (cd): remove unused GHA cache
We're leveraging the registry to cache the actions, instead of using the 10GB limits from Github Actions cache storage
* refactor (cd): use cargo-chef for caching rust deps
* fix: move build system deps before cargo cheg cook
* fix (release): use newer debian to reduce vulnerabilities
* fix (cd): use same zone, region and service accounts
* fix (cd): use same disk size and type for all deployments
* refactor (cd): activate interactive shells
Use interactive shells for manual and test deployments. This allow greater flexibility if troubleshooting is needed inside the machines
* refactor (test): use docker artifact from registry
Instead of using a VM to SSH into in to build and test. Build in GHA (to have the logs available), run the workspace tests in GHA, and just run the sync tests in GCP
Use a cintainer VM with zebra's image directly on it, and pass the needed parameters to run the Sync past mandatory checkpoint.
* tmp (cd): bump timeout for building from scratch
* tmp (test): bump build time
* fix (cd, test): bump build time-out to 210 minutes
* fix (docker): do not build with different settings
Compiling might be slow because different steps are compiling the same code 2-4 times because of the variations
* revert (docker): do not fix the rust version
* fix (docker): build on the root directory
* refactor(docker): Use base image commands and tools
* fix (cd): use correct variables & values, add build concurrency
* fix(cd): use Mainnet instead of mainnet
* imp: remove checkout as Buildkit uses the git context
* fix (docker): just Buildkit uses a .dockerignore in a path
* imp (cd): just use needed variables in the right place
* imp (cd): do not checkout if not needed
* test: run on push
* refactor(docker): reduce build changes
* fix(cd): not checking out was limiting some variables
* refactor(test): add an multistage exclusive for testing
* fix(cd): remove tests as a runtime dependency
* fix(cd): use default service account with cloud-platform scope
* fix(cd): revert checkout actions
* fix: use GA c2 instead of Preview c2d machine types
* fix(actions): remove workflow_dispatch from patched actions
This causes GitHub confusion as it can't determined which of the actions using workflow_dispatch is the right one
* fix(actions): remove patches from push actions
* test: validate changes on each push
* fix(test): wrong file syntax on test job
* fix(test): add missing env parameters
* fix(docker): Do not rebuild to download params and run tests
* fix(test): setup gcloud and loginto artifact just when needed
Try not to rebuild the tests
* fix(test): use GCP container to sync past mandatory checkpoint
* fix(test): missing separators
* test
* fix(test): mount the available disk
* push
* refactor(test): merge disk regeneration into test.yml
* fix(cd): minor typo fixes
* fix(docker): rebuild on .github changes
* fix(cd): keep compatibility with gcr.io
To prevent conflicts between registries, and migrate when the time is right, we'll keep pushing to both registries and use github actions cache to prevent conflicts between artifacts.
* fix(cd): typo and scope
* fix(cd): typos everywhere
* refactor(test): use smarter docker wait and keep old registry
* fix(cd): do not constraint the CPUs for bigger machines
* revert(cd): reduce PR diff as there's a separate one for tests
* fix(docker): add .github as it has no impact on caching
* fix(test): run command correctly
* fix(test): wiat and create image if previous step succeded
* force rebuild
* fix(test): do not restrict interdependant steps based on event
* force push
* feat(docker): add google OS Config agent
Use a separate step to have better flexibility in case a better approach is available
* fix(test): remove all hardoced values and increase disks
* fix(test): use correct commands on deploy
* fix(test): use args as required by google
* fix(docker): try not to invalidate zebrad download cache
* fix(test): minor typo
* refactor(test): decouple jobs for better modularity
This also allows faster tests as testing Zunstable won't be a dependency and it can't stop already started jobs if it fails.
* fix(test): Do not try to execute ss and commands in one line
* fix(test): do not show undeeded information in the terminal
* fix(test): sleep befor/after machine creation/deletion
* fix(docker): do not download zcash params twice
* feat(docker): add google OS Config agent
Use a separate step to have better flexibility in case a better approach is available
* merge: docker-actions-refactor into docker-test-refactor
* test docker wait scenarios
* fix(docker): $HOME variables is not being expanded
* fix(test): allow docker wait to work correctly
* fix(docker): do not use variables while using COPY
* fix(docker): allow to use zebrad as a command
* fix(cd): use test .yml from main
* fix(cd): Do not duplicate network values
The Dockerfile has an ARG with a default value of 'Mainnet', if this value is changed it will be done manually on a workflow_dispatch, making the ENV option a uneeded duplicate in this workflow
* fix(test): use bigger machine type for compute intensive tasks
* refactor(test): add tests in CI file
* fix(test): remove duplicated tests
* fix(test): typo
* test: build on .github changes temporarily
* fix(test): bigger machines have no effect on sync times
* feat: add an image to inherit from with zcash params
* fix(cd): use the right image name and allow push to test
* fix(cd): use the right docker target and remove extra builds
* refactor(docker): use cached zcash params from previous build
* fix(cd): finalize for merging
* imp(cd): add double safety measure for production
* fix(cd): use specific SHA for containers
* fix(cd): use latest gcloud action version
* fix(test): use the network as Mainnet and remove the uppercase from tests
* fix(test): run disk regeneration on specific file change
Just run this regeneration when changing the following files:
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/service/finalized_state/disk_format.rs
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/service/finalized_state.rs
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/constants.rs
* refactor(test): seggregate disks regeneration from tests
Allow to regenerate disks without running tests, and to run tests from previous disk regeneration.
Disk will be regenerated just if specific files were changed, or triggered manually.
Tests will run just if a disk regeneration was not manually triggered.
* fix(test): gcp disks require lower case conventions
* fix(test): validate logs being emmited by docker
GHA is transforming is somehow transforwing the variable to lowercase also, so we're changint it to adapt to it
* test
* fix(test): force tty terminal
* fix(test): use a one line command to test terminal output
* fix(test): always delete test instance
* fix(test): use short SHA from the PR head
Using the SHA from the base, creates confusion and it's not accurate with the SHA being shown and used on GitHub.
We have to keep both as manual runs with `workflow_dispatch` does not have a PR SHA
* fix(ci): do not trigger CI on docker changes
There's no impact in this workflow when a change is done in the dockerfile
* Instead of runing cargo test when the instance gets created, run this commands afterwards in a different step.
As GHA TTY is not working as expected, and workarounds does not play nicely with `gcloud compute ssh` actions/runner#241 (comment) we decided to get the container name from the logs, log directly to the container and run the cargo command from there.
* doc(test): document reasoning for new steps
* fix(test): increase machine type and ssh timeout
* fix(test): run tests on creation and follow container logs
This allows to follow logs in Github Actions terminal, while the GCP container is still running.
Just delete the instance when following the logs ends successfully or fails
* finalize(test): do not rebuild image when changing actions
* fix(test): run tests on creation and follow container logs
This allows to follow logs in Github Actions terminal, while the GCP container is still running.
Just delete the instance when following the logs ends successfully or fails
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
2022-02-15 16:54:16 -08:00
|
|
|
--boot-disk-size 10GB \
|
|
|
|
--boot-disk-type=pd-ssd \
|
|
|
|
--container-stdin \
|
|
|
|
--container-tty \
|
|
|
|
--container-image electriccoinco/zcashd \
|
2021-03-04 12:30:25 -08:00
|
|
|
--container-env ZCASHD_NETWORK="${{ github.event.inputs.network }}" \
|
refactor (actions): make better use of variables, secrets and versions (#3393)
* style: use global variables and don't double print
Remove repeated instances of global environment variables. Do not print ENV variables on the terminal as GitHub Actions already shows it.
* fix (actions): Use fixed major versions for actions
As actions get recurrent fixes, using a specific version causes more maintance on the pipelines.
On the other hand, using @master versions could make some action unreliable, as breaking changes might be included without further notice, and even change behavior on a daily basis.
* refactor: make better use of ENV variables
A whole step with refex was being used to extract different variables from GitHub's environment. This gets depecrated in favor of using `rlespinasse/github-slug-action@v4` which has slug URL variables.
A SLUG on a variable will:
- put the variable content in lower case
- replace any character by - except 0-9, a-z, ., and _
- remove leading and trailing - character
- limit the string size to 63 characters
This changes also takes care of using the Head or Base branch for deployments. This will allow us tomerge of workflows, as most steps on this deployment actions are very similar, with little variations between workflows.
* fix (actions): use secrets for sensitive information
* revert: use specific versions for dependabot
Reverting commit 8c934099028e0651e464678c096d8d3815efe95c
2022-01-26 17:46:18 -08:00
|
|
|
--machine-type ${{ env.MACHINE_TYPE }} \
|
|
|
|
--service-account ${{ env.DEPLOY_SA }} \
|
2021-03-04 12:30:25 -08:00
|
|
|
--scopes cloud-platform \
|
refactor(test): dockerize tests and run sync in detached mode (#3459)
* refactor (cd): overall pipeline improvement
- Use a more ENV configurable Dockerfile
- Remove cloudbuild dependency
- Use compute optimized machine types
- Use SSD instead of normal hard drives
- Move Sentry endpoint to secrets
- Use a single yml for auto & manual deploy
- Migrate to Google Artifact Registry
* refactor (cd): overall pipeline improvement
- Use a more ENV configurable Dockerfile
- Remove cloudbuild dependency
- Use compute optimized machine types
- Use SSD instead of normal hard drives
- Move Sentry endpoint to secrets
- Use a single yml for auto & manual deploy
- Migrate to Google Artifact Registry
* refactor (cd): use newer google auth action
* fix (cd): use newer secret as gcp credential
* fix (docker): do not create extra directories
* fix (docker): ignore .github for caching purposes
* fix (docker): use latest rust
* fix (cd): bump build timeout
* fix: use a better name for manual deployment
* refactor (docker): use standard directories for executable
* fix (cd): most systems expect a "latest" tag
Caching from the latest image is one of the main reasons to add this extra tag. Before this commit, the inline cache was not being used.
* fix (cd): push the build image and the cache separately
The inline cache exporter only supports `min` cache mode. To enable `max` cache mode, push the image and the cache separately by using the registry cache exporter.
This also allows for smaller release images.
* fix (cd): remove unused GHA cache
We're leveraging the registry to cache the actions, instead of using the 10GB limits from Github Actions cache storage
* refactor (cd): use cargo-chef for caching rust deps
* fix: move build system deps before cargo cheg cook
* fix (release): use newer debian to reduce vulnerabilities
* fix (cd): use same zone, region and service accounts
* fix (cd): use same disk size and type for all deployments
* refactor (cd): activate interactive shells
Use interactive shells for manual and test deployments. This allow greater flexibility if troubleshooting is needed inside the machines
* refactor (test): use docker artifact from registry
Instead of using a VM to SSH into in to build and test. Build in GHA (to have the logs available), run the workspace tests in GHA, and just run the sync tests in GCP
Use a cintainer VM with zebra's image directly on it, and pass the needed parameters to run the Sync past mandatory checkpoint.
* tmp (cd): bump timeout for building from scratch
* tmp (test): bump build time
* fix (cd, test): bump build time-out to 210 minutes
* fix (docker): do not build with different settings
Compiling might be slow because different steps are compiling the same code 2-4 times because of the variations
* revert (docker): do not fix the rust version
* fix (docker): build on the root directory
* refactor(docker): Use base image commands and tools
* fix (cd): use correct variables & values, add build concurrency
* fix(cd): use Mainnet instead of mainnet
* imp: remove checkout as Buildkit uses the git context
* fix (docker): just Buildkit uses a .dockerignore in a path
* imp (cd): just use needed variables in the right place
* imp (cd): do not checkout if not needed
* test: run on push
* refactor(docker): reduce build changes
* fix(cd): not checking out was limiting some variables
* refactor(test): add an multistage exclusive for testing
* fix(cd): remove tests as a runtime dependency
* fix(cd): use default service account with cloud-platform scope
* fix(cd): revert checkout actions
* fix: use GA c2 instead of Preview c2d machine types
* fix(actions): remove workflow_dispatch from patched actions
This causes GitHub confusion as it can't determined which of the actions using workflow_dispatch is the right one
* fix(actions): remove patches from push actions
* test: validate changes on each push
* fix(test): wrong file syntax on test job
* fix(test): add missing env parameters
* fix(docker): Do not rebuild to download params and run tests
* fix(test): setup gcloud and loginto artifact just when needed
Try not to rebuild the tests
* fix(test): use GCP container to sync past mandatory checkpoint
* fix(test): missing separators
* test
* fix(test): mount the available disk
* push
* refactor(test): merge disk regeneration into test.yml
* fix(cd): minor typo fixes
* fix(docker): rebuild on .github changes
* fix(cd): keep compatibility with gcr.io
To prevent conflicts between registries, and migrate when the time is right, we'll keep pushing to both registries and use github actions cache to prevent conflicts between artifacts.
* fix(cd): typo and scope
* fix(cd): typos everywhere
* refactor(test): use smarter docker wait and keep old registry
* fix(cd): do not constraint the CPUs for bigger machines
* revert(cd): reduce PR diff as there's a separate one for tests
* fix(docker): add .github as it has no impact on caching
* fix(test): run command correctly
* fix(test): wiat and create image if previous step succeded
* force rebuild
* fix(test): do not restrict interdependant steps based on event
* force push
* feat(docker): add google OS Config agent
Use a separate step to have better flexibility in case a better approach is available
* fix(test): remove all hardoced values and increase disks
* fix(test): use correct commands on deploy
* fix(test): use args as required by google
* fix(docker): try not to invalidate zebrad download cache
* fix(test): minor typo
* refactor(test): decouple jobs for better modularity
This also allows faster tests as testing Zunstable won't be a dependency and it can't stop already started jobs if it fails.
* fix(test): Do not try to execute ss and commands in one line
* fix(test): do not show undeeded information in the terminal
* fix(test): sleep befor/after machine creation/deletion
* fix(docker): do not download zcash params twice
* feat(docker): add google OS Config agent
Use a separate step to have better flexibility in case a better approach is available
* merge: docker-actions-refactor into docker-test-refactor
* test docker wait scenarios
* fix(docker): $HOME variables is not being expanded
* fix(test): allow docker wait to work correctly
* fix(docker): do not use variables while using COPY
* fix(docker): allow to use zebrad as a command
* fix(cd): use test .yml from main
* fix(cd): Do not duplicate network values
The Dockerfile has an ARG with a default value of 'Mainnet', if this value is changed it will be done manually on a workflow_dispatch, making the ENV option a uneeded duplicate in this workflow
* fix(test): use bigger machine type for compute intensive tasks
* refactor(test): add tests in CI file
* fix(test): remove duplicated tests
* fix(test): typo
* test: build on .github changes temporarily
* fix(test): bigger machines have no effect on sync times
* feat: add an image to inherit from with zcash params
* fix(cd): use the right image name and allow push to test
* fix(cd): use the right docker target and remove extra builds
* refactor(docker): use cached zcash params from previous build
* fix(cd): finalize for merging
* imp(cd): add double safety measure for production
* fix(cd): use specific SHA for containers
* fix(cd): use latest gcloud action version
* fix(test): use the network as Mainnet and remove the uppercase from tests
* fix(test): run disk regeneration on specific file change
Just run this regeneration when changing the following files:
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/service/finalized_state/disk_format.rs
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/service/finalized_state.rs
https://github.com/ZcashFoundation/zebra/blob/main/zebra-state/src/constants.rs
* refactor(test): seggregate disks regeneration from tests
Allow to regenerate disks without running tests, and to run tests from previous disk regeneration.
Disk will be regenerated just if specific files were changed, or triggered manually.
Tests will run just if a disk regeneration was not manually triggered.
* fix(test): gcp disks require lower case conventions
* fix(test): validate logs being emmited by docker
GHA is transforming is somehow transforwing the variable to lowercase also, so we're changint it to adapt to it
* test
* fix(test): force tty terminal
* fix(test): use a one line command to test terminal output
* fix(test): always delete test instance
* fix(test): use short SHA from the PR head
Using the SHA from the base, creates confusion and it's not accurate with the SHA being shown and used on GitHub.
We have to keep both as manual runs with `workflow_dispatch` does not have a PR SHA
* fix(ci): do not trigger CI on docker changes
There's no impact in this workflow when a change is done in the dockerfile
* Instead of runing cargo test when the instance gets created, run this commands afterwards in a different step.
As GHA TTY is not working as expected, and workarounds does not play nicely with `gcloud compute ssh` actions/runner#241 (comment) we decided to get the container name from the logs, log directly to the container and run the cargo command from there.
* doc(test): document reasoning for new steps
* fix(test): increase machine type and ssh timeout
* fix(test): run tests on creation and follow container logs
This allows to follow logs in Github Actions terminal, while the GCP container is still running.
Just delete the instance when following the logs ends successfully or fails
* finalize(test): do not rebuild image when changing actions
* fix(test): run tests on creation and follow container logs
This allows to follow logs in Github Actions terminal, while the GCP container is still running.
Just delete the instance when following the logs ends successfully or fails
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
2022-02-15 16:54:16 -08:00
|
|
|
--tags zcashd
|
2021-03-04 12:30:25 -08:00
|
|
|
|
|
|
|
# Check if our destination instance group exists already
|
|
|
|
- name: Check if instance group exists
|
|
|
|
id: does-group-exist
|
|
|
|
continue-on-error: true
|
|
|
|
run: |
|
2022-03-03 22:33:29 -08:00
|
|
|
gcloud compute instance-groups list | grep "zcashd-${{ env.GITHUB_REF_SLUG_URL }}-${{ github.event.inputs.network }}" | grep "${{ env.REGION }}"
|
2021-03-04 12:30:25 -08:00
|
|
|
|
|
|
|
# Deploy new managed instance group using the new instance template
|
|
|
|
- name: Create managed instance group
|
|
|
|
if: steps.does-group-exist.outcome == 'failure'
|
|
|
|
run: |
|
|
|
|
gcloud compute instance-groups managed create \
|
2022-03-03 22:33:29 -08:00
|
|
|
"zcashd-${{ env.GITHUB_REF_SLUG_URL }}-${{ github.event.inputs.network }}" \
|
|
|
|
--template "zcashd-${{ env.GITHUB_REF_SLUG_URL }}-${{ env.GITHUB_SHA_SHORT }}" \
|
refactor (actions): make better use of variables, secrets and versions (#3393)
* style: use global variables and don't double print
Remove repeated instances of global environment variables. Do not print ENV variables on the terminal as GitHub Actions already shows it.
* fix (actions): Use fixed major versions for actions
As actions get recurrent fixes, using a specific version causes more maintance on the pipelines.
On the other hand, using @master versions could make some action unreliable, as breaking changes might be included without further notice, and even change behavior on a daily basis.
* refactor: make better use of ENV variables
A whole step with refex was being used to extract different variables from GitHub's environment. This gets depecrated in favor of using `rlespinasse/github-slug-action@v4` which has slug URL variables.
A SLUG on a variable will:
- put the variable content in lower case
- replace any character by - except 0-9, a-z, ., and _
- remove leading and trailing - character
- limit the string size to 63 characters
This changes also takes care of using the Head or Base branch for deployments. This will allow us tomerge of workflows, as most steps on this deployment actions are very similar, with little variations between workflows.
* fix (actions): use secrets for sensitive information
* revert: use specific versions for dependabot
Reverting commit 8c934099028e0651e464678c096d8d3815efe95c
2022-01-26 17:46:18 -08:00
|
|
|
--region "${{ env.REGION }}" \
|
2021-03-04 12:30:25 -08:00
|
|
|
--size "${{ github.event.inputs.size }}"
|
|
|
|
|
|
|
|
# Rolls out update to existing group using the new instance template
|
|
|
|
- name: Update managed instance group
|
|
|
|
if: steps.does-group-exist.outcome == 'success'
|
|
|
|
run: |
|
|
|
|
gcloud compute instance-groups managed rolling-action start-update \
|
2022-03-03 22:33:29 -08:00
|
|
|
"zcashd-${{ env.GITHUB_REF_SLUG_URL }}-${{ github.event.inputs.network }}" \
|
|
|
|
--version template="zcashd-${{ env.GITHUB_REF_SLUG_URL }}-${{ env.GITHUB_SHA_SHORT }}" \
|
2022-02-08 16:50:13 -08:00
|
|
|
--region "${{ env.REGION }}"
|