* mempool - support transaction expiration
* use `LatestChainTip` instead of state call
* clippy
* remove spawn task
* remove non needed async from function
* remove return value
* add a `expiry_height_mut()` method to `Transaction` for testing purposes
* fix `remove_expired_transactions()`
* add a `mempool_transaction_expiration()` test
* tidy cleanup to `expiry_height()`
* improve docs
* fix the build
* try fix macos build
* extend tests
* add doc to function
* clippy
* fix build
* start tests at block two
* Cancel download and verify tasks when the mempool is deactivated
* Refactor enable/disable logic to use a state enum
* Add helper test functions to enable/disable the mempool
* Add documentation about errors on service calls
* Improvements from review
* Improve documentation
* Fix bug in test
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
* Add `Transaction::spent_outpoints` getter method
Returns an iterator over the UTXO `OutPoint`s spent by the transaction.
* Add `mempool::Error::Conflict` variant
An error representing that a transaction was rejected because it
conflicts with another transaction that's already in the mempool.
* Reject conflicting mempool transactions
Reject including a transaction in the mempool if it spends outputs
already spent by, or reveals nullifiers already revealed by another
transaction in the mempool.
* Fix typo in documentation
Remove the `r` that was incorrectly added.
Co-authored-by: teor <teor@riseup.net>
* Specify that the conflict is a spend conflict
Make the situation clearer, because there are other types of conflict.
Co-authored-by: teor <teor@riseup.net>
* Clarify that the outpoints are from inputs
Because otherwise it could lead to confusion because it could also mean
the outputs of the transaction represented as `OutPoint` references.
Co-authored-by: teor <teor@riseup.net>
* Create `storage::tests::vectors` module
Refactor to follow the convention used for other tests.
* Add an `AtLeastOne::first_mut` method
A getter to allow changing the first element.
* Add an `AtLeastOne::push` method
Allow appending elements to the collection.
* Derive `Arbitrary` for `FieldNotPresent`
This is just to make the code that generates arbitrary anchors a bit
simpler.
* Test if conflicting transactions are rejected
Generate two transactions (either V4 or V5) and insert a conflicting
spend, which can be either a transparent UTXO, or a nullifier for one of
the shielded pools. Check that any attempt to insert both transactions
causes one to be accepted and the other to be rejected.
* Delete a TODO comment that we decided not to do
Co-authored-by: teor <teor@riseup.net>
* Add tests for mempool Request::Queue
* Update test to work after refactoring
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Send `Response::Nil` instead of sending empty `Message`s
This matches `zcashd`'s behaviour more closely.
In most cases, the network layer filters these out already.
But this change makes the the inbound service code clearer.
* revert changes made to `AdvertiseTransactionIds` and `PushTransaction`
* remove newline
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Update the expiry TODO
* Clear the mempool at a chain tip reset
* Clear the mempool by using a sync method (#2777)
* Clear the mempool by using a sync method
* Update docs
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Refactor last_tip_change()
* Apply suggestions from code review
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Fix brackets
* Use best_tip_block instead of manual borrowing
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Remove return of redundant vector length
An attempt to improve readability a bit by not returning a tuple with a
value that can be obtained from a single return type.
* Refactor `unmined_transactions_in_blocks`
Use a more functional style to try to make it a bit clearer.
* Use ranges in `unmined_transactions_in_blocks`
Allow a finer control over the block range to extract the transactions
from.
* Refactor mempool test code to improve clarity
It was previously not clear that only the first genesis transaction was
being used. The remaining transactions in the genesis block were
discarded and then readded later.
* Replace `oneshot` with `call`
Remove a redundant internal `ready_and` call.
* Return an `impl Iterator` instead of a `Vec<_>`
Remove unnecessary deserializations and heap allocations.
* Refactor `mempool_storage_basic_for_network` test
Make the separation between the transactions expected to be in the
mempool and those expected to be rejected clearer.
* Replace `Iterator` with `DoubleEndedIterator`
Allow getting the last transaction more easily.
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Use `MockService` in inbound test
Refactor the `mempool_requsets_for_transactions` test so that it uses a
`MockService` instead of the `mock_peer_set` function.
* Use `MockService` in the basic mempool test
Refactor the `mempool_service_basic` test so that it uses a
`MockService` instead of the `mock_peer_set` helper function.
* Remove the `mock_peer_set` helper function
It is not used anymore, since the usages were replaced with
`MockService`s.
* add tests for mempool inbound requests
* Use MockService for transaction verifier
* Refactor creation of mock `peer_set`
Use the same style as the mock transaction verifier.
* Derive `Eq` for `zebra_network::Request`
Make it easy to use the `MockService::expect_request` method.
* Return mocked peer set service from `setup`
Allow it to be used to respond to requests.
* Add bindings for the transaction used for testing
Allow them to be moved into futures later.
* Respond to transaction download request
Make sure that the test transaction appears to the mempool as if it had
been downloaded by the peer set service.
* Assert that no unexpected requests were received
Check that the mempool doesn't send unexpected requests to the peer set
service.
* add tests for mempool inbound requests
* Use MockService for transaction verifier
* add missing `expect_no_requests` to `mempool_advertise_transaction_ids` test
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Use `MockService` in inbound test
Refactor the `mempool_requsets_for_transactions` test so that it uses a
`MockService` instead of the `mock_peer_set` function.
* Use `MockService` in the basic mempool test
Refactor the `mempool_service_basic` test so that it uses a
`MockService` instead of the `mock_peer_set` helper function.
* Remove the `mock_peer_set` helper function
It is not used anymore, since the usages were replaced with
`MockService`s.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Allow deliberate instances of the new nightly clippy::derivable_impls lint
We want our config defaults to be explicit.
Not so sure about the application defaults, but they also contain a config.
* Also allow unknown lint names
Stable doesn't know about this lint, but nightly does.
* Implement initial service mocking helpers
Adds a [`MockService`] type, which can be configured and built for usage
in unit tests or proptests. The mocked service can then be used to
intercept requests and respond indivdiually to them.
* Use `MockService in the `mempool::Crawler` test
Refactor it to remove the helper mock function, and use the new
`MockService` helper type.
* Use `MockService` in `CandidateSet` test vectors
Refactor to remove the manual mocking of the peer set service.
* Panic if a response is not sent by `MockService`
Change the current semantics to require all `MockService` usages to
respond to every intercepted request.
A `must_use` attribute was added to the `ResponseSender` so that the
compiler can warn when this doesn't happen.
* Allow generic error types in `MockService`
Replace the hard-coded `BoxError` as the `Service`'s error type with a
generic type parameter. This allows mocking services in locations that
require specific error types.
* Add a `ResponseSender::request` getter
Allow inspecting the request again before responding, and using
information from the request in the response.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Pass sync_status to mempool
* Update zebrad/src/components/mempool.rs
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Remove enabled flag for now; will be handled in #2723
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Check if tx already exists in mempool or state before downloading
* Reorder checks
* Add rejected test; refactor into separate function
* Wrap mempool in buffered service
* Rename RejectedTransactionsById -> RejectedTransactionsIds
* Add RejectedTransactionIds response; fix request name
* Organize imports
* add a test for Storage::rejected_transactions
* add test for mempool `Request::RejectedTransactionIds`
* change buffer size to 1 in the test
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Using `&mut self` as the receiver in the method signatures allows Rust
to infer that the type is properly `Sync`, and therefore `Send`. This
allows removing the `Mutex` work-around.
* Decide if Zebra is at the chain tip
* Avoid division by zero
* Try increasing EVENT_TIMEOUT
* Increase MAX_TEST_EXECUTION
* Implement basic tests
* Resolve Clippy's erorrs
* change doc comments to normal
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* reply to `Request::MempoolTransactionIds`
* remove boilerplate
* get storage from mempool with a method
* change panic message
* try fix for mac
* use normal init instead of init_tests for state service
* newline
* rustfmt
* fix test build
* Rename ChainTipReceiver to CurrentChainTip
`fastmod ChainTipReceiver CurrentChainTip zebra*`
* Update chain tip documentation and variable names
* Basic chain tip change implementation, without resets
Also includes the following name changes:
```
fastmod CurrentChainTip LatestChainTip zebra*
fastmod chain_tip_receiver latest_chain_tip zebra*
```
* Clarify the difference between `LatestChainTip` and `ChainTipChange`
* Store a `SyncStatus` handle in the `Crawler`
The helper type will make it easier to determine if the crawler is
enabled or not.
* Pause crawler if mempool is disabled
Implement waiting until the mempool becomes enabled, so that the crawler
does not run while the mempool is disabled.
If the `MempoolStatus` helper is unable to determine if the mempool is
enabled, stop the crawler task entirely.
* Update test to consider when crawler is paused
Change the mempool crawler test so that it's a proptest that tests
different chain sync. lengths. This leads to different scenarios with
the crawler pausing and resuming.
Co-authored-by: teor <teor@riseup.net>
* Create a `SyncStatus` helper type
Keeps track if the synchronizer is close to the chain tip or not.
* Refactor `ChainSync` ctor. to return `SyncStatus`
Change the constructor API so that it returns a higher level construct.
* Test if `SyncStatus` waits for the chain tip
Test if waiting for the chain tip to be reached correctly finishes when
the chain tip is reached. This is done by sending recent sync lengths to
the `SyncStatus` instance, and checking that every time a separate
`SyncStatus` instance determines it has reached the tip the original
instance wakes up.
* Add a temporary attribute to allow dead code
The code added isn't used yet, so we'll add a temporary waiver until
another PR is merged to use them.
This avoids peer set contention when most peers are busy.
Also exit the task if the peer service returns a readiness error,
because that means it's permanently unusable.
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* First pass at a Mempool Service, incl. a storage layer underneath
* Fixed up Mempool service and storage
* allow dead code where needed
* clippy
* typo
* only drain if the mempool is full
* add a basic storage test
* remove space
* fix test for when MEMPOOL_SIZE change
* group some imports
* add a basic mempool service test
* add clippy suggestions
* remove not needed allow dead code
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: teor <teor@riseup.net>
* Rename BestTipHeight so it can be generalised to ChainTipSender
`fastmod BestTipHeight ChainTipSender zebra*`
For senders:
`fastmod best_tip_height chain_tip_sender zebra*`
For receivers:
`fastmod best_tip_height chain_tip_receiver zebra*`
* Rename best_tip_height module to chain_tip
* Wrap the chain tip watch channel in a ChainTipReceiver type
* Create a ChainTip trait to avoid tricky crate dependencies
And add convenience impls for optional and empty chain tips.
* Use the ChainTip trait in zebra-network
* Replace `Option<ChainTip>` with `NoChainTip`
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Return a transaction verifier from `zebra_consensus::init`
This verifier is temporarily created separately from the block verifier's
transaction verifier.
* Return the same transaction verifier used by the block verifier
* Clarify that the mempool verifier is the transaction verifier
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Create initial `mempool::Crawler` type
The mempool crawler is responsible for periodically asking peers for
transactions to insert into the local mempool. This initial
implementation will periodically ask for transactions, but won't do
anything with them yet.
Also, the crawler is currently configured to be always enabled, but this
should be fixed to avoid crawling while Zebra is still syncing the
chain.
* Add a timeout to peer responses
Prevent the crawler from getting stuck if there's communication with a
peer that takes too long to respond.
* Run the mempool crawler in Zebra
Spawn a task for the crawler when Zebra starts.
* Test if the crawler is sending requests
Create a mock for the `PeerSet` service to intercept requests and verify
that the transaction requests are sent periodically.
* Use `full` Tokio features when testing
Make it simpler to select the features for test builds.
Co-authored-by: teor <teor@riseup.net>
* Link to the issue for crawler activation
Make it easy to navigate from the `TODO` comment to the current project
planning.
Co-authored-by: teor <teor@riseup.net>
* Link to the issue for downloading transactions
Make it easy to navigate from the `TODO` comment to the current project
planning.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
* Minimal recent sync lengths implementation
Also includes metrics and logging, to make diagnosing bugs easier.
* Add logging to check what happens when Zebra reaches the chain tip
* Add tests for recent sync lengths
- initially empty
- pruned to correct length
- newest entries go first
* Drop a redundant `/` from a Cargo.lock URL
This seems to be a nightly or beta Rust change,
but hopefully stable just accepts it.
* Use metrics histograms to avoid overwriting values
* Add detailed syncer monitoring dashboard
* Increase the recent sync length to 4
This length makes it easier to distinguish between temporary and
sustained errors/syncs.
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Rename internal network requests for wide transaction IDs
fastmod TransactionsByHash TransactionsById zebra*
fastmod AdvertiseTransactions AdvertiseTransactionIds zebra*
fastmod MempoolTransactions MempoolTransactionIds zebra*
fastmod TransactionHashes TransactionIds zebra*
* Update network transaction request/response comments
* Rename a transaction hash method for wide transaction IDs
fastmod transaction_hashes transaction_ids zebra-network
* Add UnminedTxId methods and conversions for InventoryHash
* Map WtxIds to unmined transaction network messages
Also, use UnminedTxId and UnminedTx in:
* Zebra's internal request and response format, and
* external Zcash network protocol messages.
* Enable WtxId mempool inventory tracking for peers
* Further clarify transaction IDs
* Use Witnessed rather than Wide for transaction IDs
And rename narrow to legacy when it only applies to v1-v4 transactions.
Otherwise, rename it to mined ID.
* Rename a missed binding
* Remove an incorrectly named binding
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Simplify state service initialization in test
Use the test helper function to remove redundant code.
* Create `BestTipHeight` helper type
This type abstracts away the calculation of the best tip height based on
the finalized block height and the best non-finalized chain's tip.
* Add `best_tip_height` field to `StateService`
The receiver endpoint is currently ignored.
* Return receiver endpoint from service constructor
Make it available so that the best tip height can be watched.
* Update finalized height after finalizing blocks
After blocks from the queue are finalized and committed to disk, update
the finalized block height.
* Update best non-finalized height after validation
Update the value of the best non-finalized chain tip block height after
a new block is committed to the non-finalized state.
* Update finalized height after loading from disk
When `FinalizedState` is first created, it loads the state from
persistent storage, and the finalized tip height is updated. Therefore,
the `best_tip_height` must be notified of the initial value.
* Update the finalized height on checkpoint commit
When a checkpointed block is commited, it bypasses the non-finalized
state, so there's an extra place where the finalized height has to be
updated.
* Add `best_tip_height` to `Handshake` service
It can be configured using the `Builder::with_best_tip_height`. It's
currently not used, but it will be used to determine if a connection to
a remote peer should be rejected or not based on that peer's protocol
version.
* Require best tip height to init. `zebra_network`
Without it the handshake service can't properly enforce the minimum
network protocol version from peers. Zebrad obtains the best tip height
endpoint from `zebra_state`, and the test vectors simply use a dummy
endpoint that's fixed at the genesis height.
* Pass `best_tip_height` to proto. ver. negotiation
The protocol version negotiation code will reject connections to peers
if they are using an old protocol version. An old version is determined
based on the current known best chain tip height.
* Handle an optional height in `Version`
Fallback to the genesis height in `None` is specified.
* Reject connections to peers on old proto. versions
Avoid connecting to peers that are on protocol versions that don't
recognize a network update.
* Document why peers on old versions are rejected
Describe why it's a security issue above the check.
* Test if `BestTipHeight` starts with `None`
Check if initially there is no best tip height.
* Test if best tip height is max. of latest values
After applying a list of random updates where each one either sets the
finalized height or the non-finalized height, check that the best tip
height is the maximum of the most recently set finalized height and the
most recently set non-finalized height.
* Add `queue_and_commit_finalized` method
A small refactor to make testing easier. The handling of requests for
committing non-finalized and finalized blocks is now more consistent.
* Add `assert_block_can_be_validated` helper
Refactor to move into a separate method some assertions that are done
before a block is validated. This is to allow moving these assertions
more easily to simplify testing.
* Remove redundant PoW block assertion
It's also checked in
`zebra_state::service::check::block_is_contextually_valid`, and it was
getting in the way of tests that received a gossiped block before
finalizing enough blocks.
* Create a test strategy for test vector chain
Splits a chain loaded from the test vectors in two parts, containing the
blocks to finalize and the blocks to keep in the non-finalized state.
* Test committing blocks update best tip height
Create a mock blockchain state, with a chain of finalized blocks and a
chain of non-finalized blocks. Commit all the blocks appropriately, and
verify that the best tip height is updated.
Co-authored-by: teor <teor@riseup.net>
* Use the block verifier and non-finalized state in the cached state tests
This substantially increases test coverage.
Previously, the cached state tests were configured with
`checkpoint_sync = true`, which only uses the checkpoint
verifier and the finalized state.
* Log the source of blocks in commit_finalized_direct
This lets us check that we're actually testing the non-finalized state
and block verifier in the cached state tests.
It also improves diagnostics for state errors.
* Fail cached state tests if they're using incorrect heights or configs
This makes sure that the cached state tests actually test the transition
from checkpoint to block verification, and the non-finalized state.
Alfredo Garcia
Conrado Gouvea
Janito Vaqueiro Ferreira Filho
teor
Marek
dependabot[bot]
Deirdre Connolly
Deirdre Connolly
Pili Guerra
Conrado P. L. Gouvea