* Stop checking the entire AddressBook for each connection attempt
* Stop redundant peer time checks within the address book
* Stop calling `Instant::now` 3 times for each address book update
* Only get the time once each time an address book method is called
* Update outdated comment
* Use an OrderedMap to efficiently store address book peers
* Add address book order tests
* Add a `Duration32::from_days` constructor
Make it simpler to construct a `Duration32` representing a certain
number of days.
* Add `MetaAddr::was_not_recently_seen` method
A helper method to check if a peer was never seen before or if it was
last seen a long time ago. This will be one of the conditions to
consider a peer as unreachable.
* Add `MetaAddr::is_probably_unreachable` method
A helper method to check if a peer should be considered unreachable. It
is considered unreachable if recent connection attempts have failed and
it was not recently seen.
If a peer is considered unreachable, Zebra shouldn't attempt to connect
to it again.
* Do not keep trying to connect to unreachable peer
A peer is probably unreachable if it was last seen a long time ago and
if it's last connection attempt failed.
* Test `was_not_recently_seen`
Redo the calculation on arbitrary `MetaAddr`s.
* Test `is_probably_unreachable`
Redo the calculation on arbitrary `MetaAddr`s.
* Test if probably unreachable peers are ignored
Given an `AddressBook` with a list of arbitrary `MetaAddr`s, check that
none of the peers listed for a reconnection is probably unreachable.
* Rename unit test to improve clarity
Remove the double negative from the name.
Co-authored-by: teor <teor@riseup.net>
* Rename constant to `MAX_RECENT_PEER_AGE`
Make the purpose of the constant clearer.
Co-authored-by: teor <teor@riseup.net>
* Rename method to `last_seen_is_recent`
Remove the double negative from the name.
* Rename method to `is_probably_reachable`
Avoid having to negate the result of the method in security critical
filter.
* Move check into `is_ready_for_connection_attempt`
Make sure the check is used in any place that requires a peer that's
ready for a connection attempt.
* Improve test documention
Describe the goal of the test better.
Co-authored-by: teor <teor@riseup.net>
* Improve `is_probably_reachable` documentation
List the conditions as bullet points.
Co-authored-by: teor <teor@riseup.net>
* Document what happens when peers have no last seen time
Co-authored-by: teor <teor@riseup.net>
* Implement addr v1 serialization using a separate AddrV1 type
* Remove commented-out code
* Split the address serialization code into modules
* Reorder v1 and in_version fields in serialization order
* Fix a missed search-and-replace
* Explain conversion to MetaAddr
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add CompactSize64 and CompactSizeMessage types
But don't remove read_compactsize and write_compactsize yet.
* Fix CompactSize capitalisation
```sh
fastmod compactSize CompactSize zebra* book
fastmod compactsize CompactSize zebra* book
```
* Make CompactSize patterns consistent with integer lengths
* Replace unwrap_err with asserting is_err
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Replace a panic with an assertion
* Make generic serialization use CompactSizeMessage
* Fix type inference and borrow-checker errors
* Doctest fixes
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add `Transaction::spent_outpoints` getter method
Returns an iterator over the UTXO `OutPoint`s spent by the transaction.
* Add `mempool::Error::Conflict` variant
An error representing that a transaction was rejected because it
conflicts with another transaction that's already in the mempool.
* Reject conflicting mempool transactions
Reject including a transaction in the mempool if it spends outputs
already spent by, or reveals nullifiers already revealed by another
transaction in the mempool.
* Fix typo in documentation
Remove the `r` that was incorrectly added.
Co-authored-by: teor <teor@riseup.net>
* Specify that the conflict is a spend conflict
Make the situation clearer, because there are other types of conflict.
Co-authored-by: teor <teor@riseup.net>
* Clarify that the outpoints are from inputs
Because otherwise it could lead to confusion because it could also mean
the outputs of the transaction represented as `OutPoint` references.
Co-authored-by: teor <teor@riseup.net>
* Create `storage::tests::vectors` module
Refactor to follow the convention used for other tests.
* Add an `AtLeastOne::first_mut` method
A getter to allow changing the first element.
* Add an `AtLeastOne::push` method
Allow appending elements to the collection.
* Derive `Arbitrary` for `FieldNotPresent`
This is just to make the code that generates arbitrary anchors a bit
simpler.
* Test if conflicting transactions are rejected
Generate two transactions (either V4 or V5) and insert a conflicting
spend, which can be either a transparent UTXO, or a nullifier for one of
the shielded pools. Check that any attempt to insert both transactions
causes one to be accepted and the other to be rejected.
* Delete a TODO comment that we decided not to do
Co-authored-by: teor <teor@riseup.net>
* Make the `AuthDigest` display order match transaction IDs
And derive `Hash`, just like transaction IDs.
Don't derive `serde` for now, because it's not needed.
* Move transaction::Hash test to tests module
* Add a simple AuthDigest display order test
* Add a WtxId type for wide transaction IDs
* Add conversions between transaction IDs and bytes
* Use the WtxId type in external network protocol messages
* Rename some methods and constants for clarity
Using the following commands:
```
fastmod '\bis_ready_for_attempt\b' is_ready_for_connection_attempt
# One instance required a tweak, because of the ASCII diagram.
fastmod '\bwas_recently_live\b' has_connection_recently_responded
fastmod '\bwas_recently_attempted\b' was_connection_recently_attempted
fastmod '\bwas_recently_failed\b' has_connection_recently_failed
fastmod '\bLIVE_PEER_DURATION\b' MIN_PEER_RECONNECTION_DELAY
```
* Use `Instant::elapsed` for conciseness
Instead of `Instant::now().saturating_duration_since`. They're both
equivalent, and `elapsed` only panics if the `Instant` is somehow
synthetically generated.
* Allow `Duration32` to be created in other crates
Export the `Duration32` from the `zebra_chain::serialization` module.
* Add some new `Duration32` constructors
Create some helper `const` constructors to make it easy to create
constant durations. Add methods to create a `Duration32` from seconds,
minutes and hours.
* Avoid gossiping unreachable peers
When sanitizing the list of peers to gossip, remove those that we
haven't seen in more than three hours.
* Test if unreachable addresses aren't gossiped
Create a property test with random addreses inserted into an
`AddressBook`, and verify that the sanitized list of addresses does not
contain any addresses considered unreachable.
* Test if new alternate address isn't gossipable
Create a new alternate peer, because that type of `MetaAddr` does not
have `last_response` or `untrusted_last_seen` times. Verify that the
peer is not considered gossipable.
* Test if local listener is gossipable
The `MetaAddr` representing the local peer's listening address should
always be considered gossipable.
* Test if gossiped peer recently seen is gossipable
Create a `MetaAddr` representing a gossiped peer that was reported to be
seen recently. Check that the peer is considered gossipable.
* Test peer reportedly last seen in the future
Create a `MetaAddr` representing a peer gossiped and reported to have
been last seen in a time that's in the future. Check that the peer is
considered gossipable, to check that the fallback calculation is working
as intended.
* Test gossiped peer reportedly seen long ago
Create a `MetaAddr` representing a gossiped peer that was reported to
last have been seen a long time ago. Check that the peer is not
considered gossipable.
* Test if just responded peer is gossipable
Create a `MetaAddr` representing a peer that has just responded and
check that it is considered gossipable.
* Test if recently responded peer is gossipable
Create a `MetaAddr` representing a peer that last responded within the
duration a peer is considered reachable. Verify that the peer is
considered gossipable.
* Test peer that responded long ago isn't gossipable
Create a `MetaAddr` representing a peer that last responded outside the
duration a peer is considered reachable. Verify that the peer is not
considered gossipable.
* Always send our local listener with the latest time
Previously, whenever there was an inbound request for peers, we would
clone the address book and update it with the local listener.
This had two impacts:
- the listener could conflict with an existing entry,
rather than unconditionally replacing it, and
- the listener was briefly included in the address book metrics.
As a side-effect, this change also makes sanitization slightly faster,
because it avoids some useless peer filtering and sorting.
* Skip listeners that are not valid for outbound connections
* Filter sanitized addresses Zebra based on address state
This fix correctly prevents Zebra gossiping client addresses to peers,
but still keeps the client in the address book to avoid reconnections.
* Add a full set of DateTime32 and Duration32 calculation methods
* Refactor sanitize to use the new DateTime32/Duration32 methods
* Security: Use canonical SocketAddrs to avoid duplicate connections
If we allow multiple variants for each peer address, we can make multiple
connections to that peer.
Also make sure sanitized MetaAddrs are valid for outbound connections.
* Test that address books contain the local listener address
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Security: Limit reconnection rate to individual peers
Reconnection Rate
Limit the reconnection rate to each individual peer by applying the
liveness cutoff to the attempt, responded, and failure time fields.
If any field is recent, the peer is skipped.
The new liveness cutoff skips any peers that have recently been attempted
or failed. (Previously, the liveness check was only applied if the peer
was in the `Responded` state, which could lead to repeated retries of
`Failed` peers, particularly in small address books.)
Reconnection Order
Zebra prefers more useful peer states, then the earliest attempted,
failed, and responded times, then the most recent gossiped last seen
times.
Before this change, Zebra took the most recent time in all the peer time
fields, and used that time for liveness and ordering. This led to
confusion between trusted and untrusted data, and success and failure
times.
Unlike the previous order, the new order:
- tries all peers in each state, before re-trying any peer in that state,
and
- only checks the the gossiped untrusted last seen time
if all other times are equal.
* Preserve the later time if changes arrive out of order
* Update CandidateSet::next documentation
* Update CandidateSet state diagram
* Fix variant names in comments
* Explain why timestamps can be left out of MetaAddrChanges
* Add a simple test for the individual peer retry limit
* Only generate valid Arbitrary PeerServices values
* Add an individual peer retry limit AddressBook and CandidateSet test
* Stop deleting recently live addresses from the address book
If we delete recently live addresses from the address book, we can get a
new entry for them, and reconnect too rapidly.
* Rename functions to match similar tokio API
* Fix docs for service sorting
* Clarify a comment
* Cleanup a variable and comments
* Remove blank lines in the CandidateSet state diagram
* Add a multi-peer proptest that checks outbound attempt fairness
* Fix a comment typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Simplify time maths in MetaAddr
* Create a Duration32 type to simplify calculations and comparisons
* Rename variables for clarity
* Split a string constant into multiple lines
* Make constants match rustdoc order
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add a `at_least_one!` macro for testing
Similar to the `vec!` macro, but doesn't allow creating an empty list.
* Test if `has_inputs_and_outputs` considers actions
Create a dummy transaction with no inputs and no outputs, and add a
dummy Orchard action to it. The `check::has_inputs_and_outputs`
should succeed, because the consensus rule considers having Orchard
actions as having inputs and/or outputs.
* Refactor to create helper function
Move the code to create a fake Orchard shielded data instance to a
helper function in `zebra_chain::transaction::arbitrary`, so that other
tests can also use it.
* Test coinbase V5 transaction with enable spends
A V5 coinbase transaction that has Orchard shielded data MUST NOT have
the enable spends flag set.
* Test if coinbase without enable spends is valid
A coinbase transaction with Orchard shielded data and without the enable
spends flag set should be valid.
* Add a security comment about the `at_least_one!` macro
This macro must not be used outside tests, because it allows memory denial
of service.
Co-authored-by: teor <teor@riseup.net>
* Implement `PartialEq<i64>` for `Amount`
Allows to compare an `Amount` instance directly to an integer.
* Add `SerializationError::BadTransactionBalance`
Error variant representing deserialization of a transaction that doesn't
conform to the Sapling consensus rule where the balance MUST be zero if
there aren't any shielded spends and outputs.
* Validate consensus rule when deserializing
Return an error if the deserialized V4 transaction has a non-zero value
balance but doesn't have any Sapling shielded spends nor outputs.
* Add consensus rule link to field documentation
Describe how the consensus rule is validated structurally by
`ShieldedData`.
* Clarify that `value_balance` is zero
Make the description more concise and objective.
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Update field documentation
Include information about how the consensus rule is guaranteed during
serialization.
Co-authored-by: teor <teor@riseup.net>
* Remove `check::sapling_balances_match` function
The check is redundant because the respective consensus rule is
validated structurally by `ShieldedData`.
* Test deserialization of invalid V4 transaction
A transaction with no Sapling shielded spends and no outputs but with a
non-zero balance value should fail to deserialize.
* Change least-significant byte of the value balance
State how the byte index is calculated, and change the least
significant-byte to be non-zero.
Co-authored-by: teor <teor@riseup.net>
* Standardise lints across Zebra crates, and add missing docs
The only remaining module with missing docs is `zebra_test::command`
* Todo -> TODO
* Clarify what a transcript ErrorChecker does
Also change `Error` -> `BoxError`
* TransError -> ExpectedTranscriptError
* Output Descriptions -> Output descriptions
* initialize the work on parsing orchard data in V5
* add the rest of orchard serialization
* fix serialization according to spec
* fix arbitrary for Signature<SpendAuth>
* move deserialization of AuthorizedAction to shielded_data module
* use `from_bits_truncate` to generate valid arbitrary flags
* change panic message
* fix serialization/deserialization when nActionsOrchard is empty
* fix Halo2Proof deserialization
* implement ZcashSerialize and ZcashDeserialize for flags
* implement ZcashSerialize and ZcashDeserialize for orchard::tree::Root
* use ZcashSerialize and ZcashDeserialize for binding_sig
* implement from_parts()
* implement Arbitrary for Signature<Binding>
* add trusted preallocate with tests
* fix Arbitrary for orchard Nullifier
* Use zcash_serialize_bytes instead of write_compactsize
Co-authored-by: teor <teor@riseup.net>
* Redesign Sapling data model for V5 shared anchor and spends
The shared anchor is only present if there are any spends.
As part of this change, delete the manual PartialEq impl and its tests,
because we can derive PartialEq now.
* Stop creating a temporary Vec for the spend and output iterators
* Rename TransferData variants
Interactive rename using the following commands:
```sh
fastmod Spends SpendsAndMaybeOutputs
fastmod NoSpends JustOutputs
```
* Refactor out common sprout nullifier code
* Implement the AtLeastOne constrained vector type
This vector wrapper ensures that it always contains at least one element.
* Simplify Sapling TransferData using AtLeastOne
Also update the RFC to use AtLeastOne for Orchard.
* Add functions for serializing and deserializing split arrays
In Transaction::V5, Zcash splits some types into multiple arrays, with a
single prefix count before the first array.
Add utility functions for serializing and deserializing the subsequent
arrays, with a paramater for the original array's length.
* Use zcash_deserialize_bytes_external_count in zebra-network
* Move some preallocate proptests to their own file
And fix the test module structure so it is consistent with the rest of
zebra-chain.
* Add a convenience alias zcash_serialize_external_count
* Explain why u64::MAX items will never be reached
* Implement SafePreallocate. Resolves#1880
* Add proptests for SafePreallocate
* Apply suggestions from code review
Comments which did not include replacement code will be addressed in a follow-up commit.
Co-authored-by: teor <teor@riseup.net>
* Rename [Safe-> Trusted]Allocate. Add doc and tests
Add tests to show that the largest allowed vec under TrustedPreallocate
is small enough to fit in a Zcash block/message (depending on type).
Add doc comments to all TrustedPreallocate test cases.
Tighten bounds on max_trusted_alloc for some types.
Note - this commit does NOT include TrustedPreallocate
impls for JoinSplitData, String, and Script.
These impls will be added in a follow up commit
* Implement SafePreallocate. Resolves#1880
* Add proptests for SafePreallocate
* Apply suggestions from code review
Comments which did not include replacement code will be addressed in a follow-up commit.
Co-authored-by: teor <teor@riseup.net>
* Rename [Safe-> Trusted]Allocate. Add doc and tests
Add tests to show that the largest allowed vec under TrustedPreallocate
is small enough to fit in a Zcash block/message (depending on type).
Add doc comments to all TrustedPreallocate test cases.
Tighten bounds on max_trusted_alloc for some types.
Note - this commit does NOT include TrustedPreallocate
impls for JoinSplitData, String, and Script.
These impls will be added in a follow up commit
* Impl TrustedPreallocate for Joinsplit
* Impl ZcashDeserialize for Vec<u8>
* Arbitrary, TrustedPreallocate, Serialize, and tests for Spend<SharedAnchor>
Co-authored-by: teor <teor@riseup.net>
This extracts the SHA256d code from being split across two modules and puts it
in one module, under serialization.
The code is unchanged except for three deleted tests:
* `sha256d_flush` in `sha256d_writer` (not a meaningful test);
* `transactionhash_debug` (constructs an invalid transaction hash, and the
behavior is tested in the next test);
* `decode_state_debug` (we do not need to test the Debug output of
DecodeState);
teor
Janito Vaqueiro Ferreira Filho
Alfredo Garcia
Deirdre Connolly
Deirdre Connolly
Preston Evans
Henry de Valence
Ramana Venkata