* fix(test): make full sync tests more efficient
Increasing the lookahead limit should increase sync speed,
at the cost of increasing memory usage.
* doc(test): remove a redundant TODO
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat(log): log current height when logging sync progress
* fix(test): log the specific error when full sync tests fail
* doc(start): remove an obsolete TODO
We can't decrease this log level, because the tests rely on it.
* fix(test): wait until mempool activates in full sync tests
Changes the log message and log test so that the test only finishes
when the mempool has activated.
There is still a race condition here, between the log timer and
mempool activation. But it should be very rare, because the mempool
is activated immediately when `is_close_to_tip()` becomes true.
* fix(test): warn when Zebra stalls below the maximum checkpoint height
This also improves the full sync tests,
because the warning is checked before logging a successful sync.
* feat(log): warn when sync stalls downloading the genesis block
* fix(test): warn when the state hasn't committed a block for a long time
This also improves the full sync tests,
because the warning is checked before logging a successful sync.
* doc(test): update some sync acceptance test comments
* fix(log): use Display formatting to log chrono::Duration
Debug formatting is complicated and hard to read.
* fix(log): stop saying that we've activated the mempool without checking it
We're not checking if the mempool is active, so we can't say that.
* fix(log): minor tidying and TODOs
* fix(doc): fix a typo in the tests
* fix(log): explain the post-checkpoint blocks in progress warning calculations
* fix(doc): explain what could happen if we don't wait for extra blocks
* fix(log): add a percent symbol to a percent log
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Allow forcing colored output in `zebrad`
Add a configuration item that allows forcing Zebra to output in color
mode even if the output device is not a terminal.
* Allow enabling colored output from Zebra in tests
Force Zebrad instances to use colored output if the
`ZEBRA_FORCE_USE_COLOR` environment variable is set.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Create a `MempoolBehavior` helper type
Prepare to replace the `Option<Height>` with a custom type that is more
flexible and provides more meaning when used.
* Use `MempoolBehavior` instead of `Option<Height>`
Clarify what the argument is, and prepare the code so that a new variant
can be added to the `MempoolBehavior` later.
* Allow the mempool to be automatically activated
Add a new variant to `MempoolBehavior` that indicates that the mempool
should become active during the test without needing a forced activation
height.
* Test full synchronization
Run `zebrad` and wait until full synchronization completes. Check if the
mempool is automatically activated when it reaches the tip.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Previously, the test would wait 10 seconds for the process to launch.
Now it waits until the process has used the conflicting resource.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Move standard lints into .cargo/config.toml
* Ignore "wrong self convention" in a futures-based trait
This lint might only trigger on beta or nightly at the moment.
* Warn if future incompatibile code is added to Zebra
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Use `testdir()` instead of `TempDir::new()`
Reduce repeated code and make it easier to change from using `tempdir`
to use `tempfile` instead.
* Replace `tempdir` with `tempfile` in `zebrad`
Use `tempfile`'s `TempDir` instead.
* Use `tempdir()` instead of `TempDir::new()`
Reduce repeated code and make it easier to upgrade to `tempfile`.
* Use `tempfile` instead of `tempdir`
Replace obsoleted `tempdir` dependency with `tempfile`.
* Use `tempfile` instead of `tempdir`
Replace obsoleted `tempdir` dependency with `tempfile`.
* Update `Cargo.lock`
Update it now that `tempdir` has been replaced with `tempfile`.
* Remove `tempdir` from `deny.toml` exceptions
Ban duplicate versions of the `tempdir` dependency.
* Remove `inferno` from `deny.toml` exceptions
It apparently isn't needed anymore.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Implement graceful shutdown for the peer set
* Use the minimum lookahead limit in acceptance tests
* Enable a doctest that compiles with newly public modules
* Update `tower` to version `0.4.9`
Update to latest version to add support for Tokio version 1.
* Replace usage of `ServiceExt::ready_and`
It was deprecated in favor of `ServiceExt::ready`.
* Update Tokio dependency to version `1.13.0`
This will break the build because the code isn't ready for the update,
but future commits will fix the issues.
* Replace import of `tokio::stream::StreamExt`
Use `futures::stream::StreamExt` instead, because newer versions of
Tokio don't have the `stream` feature.
* Use `IntervalStream` in `zebra-network`
In newer versions of Tokio `Interval` doesn't implement `Stream`, so the
wrapper types from `tokio-stream` have to be used instead.
* Use `IntervalStream` in `inventory_registry`
In newer versions of Tokio the `Interval` type doesn't implement
`Stream`, so `tokio_stream::wrappers::IntervalStream` has to be used
instead.
* Use `BroadcastStream` in `inventory_registry`
In newer versions of Tokio `broadcast::Receiver` doesn't implement
`Stream`, so `tokio_stream::wrappers::BroadcastStream` instead. This
also requires changing the error type that is used.
* Handle `Semaphore::acquire` error in `tower-batch`
Newer versions of Tokio can return an error if the semaphore is closed.
This shouldn't happen in `tower-batch` because the semaphore is never
closed.
* Handle `Semaphore::acquire` error in `zebrad` test
On newer versions of Tokio `Semaphore::acquire` can return an error if
the semaphore is closed. This shouldn't happen in the test because the
semaphore is never closed.
* Update some `zebra-network` dependencies
Use versions compatible with Tokio version 1.
* Upgrade Hyper to version 0.14
Use a version that supports Tokio version 1.
* Update `metrics` dependency to version 0.17
And also update the `metrics-exporter-prometheus` to version 0.6.1.
These updates are to make sure Tokio 1 is supported.
* Use `f64` as the histogram data type
`u64` isn't supported as the histogram data type in newer versions of
`metrics`.
* Update the initialization of the metrics component
Make it compatible with the new version of `metrics`.
* Simplify build version counter
Remove all constants and use the new `metrics::incement_counter!` macro.
* Change metrics output line to match on
The snapshot string isn't included in the newer version of
`metrics-exporter-prometheus`.
* Update `sentry` to version 0.23.0
Use a version compatible with Tokio version 1.
* Remove usage of `TracingIntegration`
This seems to not be available from `sentry-tracing` anymore, so it
needs to be replaced.
* Add sentry layer to tracing initialization
This seems like the replacement for `TracingIntegration`.
* Remove unnecessary conversion
Suggested by a Clippy lint.
* Update Cargo lock file
Apply all of the updates to dependencies.
* Ban duplicate tokio dependencies
Also ban git sources for tokio dependencies.
* Stop allowing sentry-tracing git repository in `deny.toml`
* Allow remaining duplicates after the tokio upgrade
* Use C: drive for CI build output on Windows
GitHub Actions uses a Windows image with two disk drives, and the
default D: drive is smaller than the C: drive. Zebra currently uses a
lot of space to build, so it has to use the C: drive to avoid CI build
failures because of insufficient space.
Co-authored-by: teor <teor@riseup.net>
This matches the settings for `sync_large_checkpoints_mainnet`.
Also reduce the number of blocks synced to reduce network load.
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Increase the restart test timeout to 10 seconds
It shouldn't take this long.
But maybe the CI VMs are under a lot of load?
* Add extensive logging to diagnose CI state reload failures
* add some additional checks to the acceptance mempool test
* add an additional mempool test
* do proposed fixes to `sync_until`
* Ignore "can't kill an exited process" errors
Co-authored-by: teor <teor@riseup.net>
* Update some comments
* Add a mempool debug_enable_at_height config
* Rename a field in the mempool crawler
* Propagate syncer channel errors through the crawler
We don't want to ignore these errors, because they might indicate a shutdown.
(Or a bug that we should fix.)
* Use debug_enable_at_height in the mempool crawler
* Log when the mempool is activated or deactivated
* Deny unknown fields and apply defaults for all configs
* Move Duration last, as required for TOML tables
* Add a basic mempool acceptance test
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Use the block verifier and non-finalized state in the cached state tests
This substantially increases test coverage.
Previously, the cached state tests were configured with
`checkpoint_sync = true`, which only uses the checkpoint
verifier and the finalized state.
* Log the source of blocks in commit_finalized_direct
This lets us check that we're actually testing the non-finalized state
and block verifier in the cached state tests.
It also improves diagnostics for state errors.
* Fail cached state tests if they're using incorrect heights or configs
This makes sure that the cached state tests actually test the transition
from checkpoint to block verification, and the non-finalized state.
* add legacy chain check and tests
* improve has_network_upgrade check
* add docs to legacy_chain_check()
* change arbitrary module structure
* change the panic message
* move legacy chain acceptance into existing tests
* use a reduced_branch_id_strategy()
* add docs to strategy function
* add argument to check for legacy chain into sync_until()
* Disable IPv6 tests when $ZEBRA_SKIP_IPV6_TESTS is set
This allows users to disable IPv6 tests in environments where IPv6 is not
configured.
* Add network test env var constants
* Replace env strings with constants
fastmod '"ZEBRA_SKIP_NETWORK_TESTS"' zebra_test::net::ZEBRA_SKIP_NETWORK_TESTS
fastmod '"ZEBRA_SKIP_IPV6_TESTS"' zebra_test::net::ZEBRA_SKIP_IPV6_TESTS
* Add functions to skip network tests
* Replace test network env var checks with test function
fastmod --fixed-strings 'env::var_os(zebra_test::net::ZEBRA_SKIP_NETWORK_TESTS).is_some()' 'zebra_test::net::zebra_skip_network_tests()'
fastmod --fixed-strings 'env::var_os(zebra_test::net::ZEBRA_SKIP_IPV6_TESTS).is_some()' 'zebra_test::net::zebra_skip_ipv6_tests()'
* Remove redundant logging and use statements
* Gossip dynamically allocated listener ports to peers
Previously, Zebra would either gossip port `0`, which is invalid, or skip
gossiping its own dynamically allocated listener port.
* Improve "no configured peers" warning
And downgrade from error to warning, because inbound-only nodes are a
valid use case.
* Move random_known_port to zebra-test
* Add tests for dynamic local listener ports and the AddressBook
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
- Add a custom semver match for `zebrad` versions
- Prefer "line contains string" matches, so tests ignore minor changes
- Escape regex meta-characters when a literal string match is intended
- Rename test functions so they are more precise
- Rewrite match internals to remove duplicate code and enable custom matches
- Document match functions
* Standardise lints across Zebra crates, and add missing docs
The only remaining module with missing docs is `zebra_test::command`
* Todo -> TODO
* Clarify what a transcript ErrorChecker does
Also change `Error` -> `BoxError`
* TransError -> ExpectedTranscriptError
* Output Descriptions -> Output descriptions
`node2.is_running()` can return `true` on Windows, even though `node2`
has logged a panic. This cleanup code only runs if `node2` fails to panic
and exit as expected. So it's ok for us to skip it.
See #1781 for details.
On Windows, if a process is killed after it is dead, it returns `true`
for `was_killed`. Instead, check if the process is running before killing
it.
Also make the section where processes are running as short as possible,
and include context for both processes in every error.
* Increase the conflict acceptance test launch delay
Also rename the tests - the listener is for the Zcash protocol,
but the state, metrics, and tracing are Zebra-specific.
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* add hint for port error
* add issue filter for port panic
* add lock file hint
* add metrics endpoint port conflict hint
* add hint for tracing endpoint port conflict
* add acceptance test for resource conflics
* Split out common conflict test code into a function
* Add state, metrics, and tracing conflict tests
* Add a full set of stderr acceptance test functions
This change makes the stdout and stderr acceptance test interfaces
identical.
* move Zcash listener opening
* add todo about hint for disk full
* add constant for lock file
* match path in state cache
* don't match windows cache path
* Use Display for state path logs
Avoids weird escaping on Windows when using Debug
* Add Windows conflict error messages
* Turn PORT_IN_USE_ERROR into a regex
And add another alternative Windows-specific port error
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Jane Lusby <jane@zfnd.org>
The clippy unknown lints attribute was deprecated in
nightly in rust-lang/rust#80524. The old lint name now produces a
warning.
Since we're using `allow(unknown_lints)` to suppress warnings, we need to
add the canonical name, so we can continue to build without warnings on
nightly.
But we also need to keep the old name, so we can continue to build
without warnings on stable.
And therefore, we also need to disable the "removed lints" warning,
otherwise we'll get warnings about the old name on nightly.
We'll need to keep this transitional clippy config until rustc 1.51 is
stable.
* Stop failing acceptance tests if their directories already exist
* Add an immutable config writing helper
and use it in the cached sapling acceptance tests.
Also:
* consistently create missing config and state directories
* refactor the common config writing code into a separate function
* only ignore NotFound errors in replace_config
* enforce config immutability using the type system
Check misconfigured ephemeral doesn't create a state dir
Add extra misconfigured `zebrad` ephemeral mode checks:
* doesn't create a state directory
* doesn't create unexpected files or directories in the working directory
Check ephemeral doesn't delete an existing state directory
Refactor all the ephemeral configs and checks into a single test
function.
Also:
* cleanup acceptance tests using utility functions
* make some checks consistent between tests
* make error messages consistent
Co-authored-by: Jane Lusby <jlusby42@gmail.com>
This change avoids errors when tests are cancelled and re-run within a
short period of time, for example, using `cargo watch`.
It introduces a slight risk of port conflicts between the endpoint tests,
and with (ephemeral) ports used by other services. The risk of conflicts
across 2 tests is very low, and tests should be run in an isolated
environment on busy servers.
## Motivation
Prior to this PR we've been using `sled` as our database for storing persistent chain data on the disk between boots. We picked sled over rocksdb to minimize our c++ dependencies despite it being a less mature codebase. The theory was if it worked well enough we'd prefer to have a pure rust codebase, but if we ever ran into problems we knew we could easily swap it out with rocksdb.
Well, we ran into problems. Sled's memory usage was particularly high, and it seemed to be leaking memory. On top of all that, the performance for writes was pretty poor, causing us to become bottle-necked on sled instead of the network.
## Solution
This PR replaces `sled` with `rocksdb`. We've seen a 10x improvement in memory usage out of the box, no more leaking, and much better write performance. With this change writing chain data to disk is no longer a limiting factor in how quickly we can sync the chain.
The code in this pull request has:
- [x] Documentation Comments
- [x] Unit Tests and Property Tests
## Review
@hdevalence
* Use the default memory limit in the acceptance tests
PR #1233 changed the default `memory_cache_bytes`, but left the
acceptance tests with their old value.
* Run large checkpoint sync tests in CI
* Improve test child output match error context
* Add a debug_stop_at_height config
* Use stop at height in acceptance tests
And add some restart acceptance tests, to make sure the stop at
height feature works correctly.
* Reverse displayed endianness of transaction and block hashes
* fix zebra-checkpoints utility for new hash order
* Stop using "zebrad revhex" in zebrad-hash-lookup
* Rebuild checkpoint lists in new hash order
This change also adds additional checkpoints to the end of each list.
* Replace TransactionHash with transaction::Hash
This change should have been made in #905, but we missed Debug impls
and some docs.
Co-authored-by: Ramana Venkata <vramana@users.noreply.github.com>
Co-authored-by: teor <teor@riseup.net>
Remove the seed command entirely, and make the behavior it provided
(responding to `Request::Peers`) part of the ordinary functioning of the
start command.
The new `Inbound` service should be expanded to handle all request
types.
* add test for first checkpoint sync
Prior this this change we've not had any tests that verify our sync /
network logic is well behaved. This PR cleans up the test helper code to
make error reports more consistent and uses this cleaned up API to
implement a checkpoint sync test which runs zebrad until it reads the
first checkpoint event from stdout.
Co-authored-by: teor <teor@riseup.net>
* move include out of unix cfg
Co-authored-by: teor <teor@riseup.net>
* add metrics and tracking endpoint tests
* test endpoints more
* add change filter test for tracing
* add await to post
* separate metrics and tracing tests
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
* Remove in-memory state service
* make the config compatible with toml again
* checkpoint commit to see how much I still have to revert
* back to the starting point...
* remove unused dependency
* reorganize error handling a bit
* need to make a new color-eyre release now
* reorder again because I have problems
* remove unnecessary helpers
* revert changes to config loading
* add back missing space
* Switch to released color-eyre version
* add back missing newline again...
* improve error message on unix when terminated by signal
* add context to last few asserts in acceptance tests
* instrument some of the helpers
* remove accidental extra space
* try to make this compile on windows
* reorg platform specific code
* hide on_disk module and fix broken link
* add valid generated config test
* change to pathbuf
* use -c to make sure we are using the generated file
* add and use a ZebraTestDir type
* change approach to generate tempdir in top of each test
* pass tempdir to test_cmd and set current dir to it
* add and use a `generated_config_path` variable in tests
teor
Janito Vaqueiro Ferreira Filho
Alfredo Garcia
Dimitris Apostolou
Conrado P. L. Gouvea
Deirdre Connolly
Jane Lusby
Jane Lusby
Henry de Valence
Ramana Venkata