* add value_balance methods to transparent and shielded
* add value_balance() to transaction
* check the remaining value consensus rule
* change error name
* fix doc and nitpick
* refactor value_balance() method for joinsplit
* changes to value_balance() of Inputs
* implement joinsplits() method(not working)
* remove created methods
* remove special case
* change return error in utilities
* move utils functions to transaction methods
* fix the docs
* simplify some code
* add constrains explicitly
* remove turbofish
* refactor some transaction methods
* fix value balance signs, add docs
* simplify some code
* avoid panic in consensus check
* add missing doc
* move remaining value balance check to the state
* make changes from the last review
Co-authored-by: teor <teor@riseup.net>
* Reject transparent output double-spends
Check that transparent spends use unspent outputs from:
* earlier transaction in the same block,
* earlier blocks in the parent non-finalized chain, or
* the finalized state.
* Fixup UTXOs in proptests
* Add a comment
* Clarify a consensus rule implementation
* Fix an incorrect comment
* Fix an incorrect error message
* Clarify a comment
* Document `unspent_utxos`
* Simplify the UTXO check
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Further simplify and fix the UTXO check
- split each error case into a separate check
- combine `contains` and `insert`
- add a missing check against the non-finalized unspent UTXOs
- rename arguments and edit error strings for clarity
* Share test methods between check test modules
* Make some chain fields available to tests
* Make error field names consistent with transparent::Input
* WIP: Add tests for UTXO double-spends
- accept output and spend in the same block
- accept output and spend in a later block
- reject output and double-spend all in the same block
- reject output then double-spend in a later block
- reject output, spend, then double-spend all in different blocks
* Use Extend rather than multiple pushes
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Use Extend for more pushes
* Limit the number of proptest cases, to speed up tests
* Test rejection of UTXOs that were never in the chain
* Test rejection of spends of later transactions in the same block
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* add a zero() method to Amount
* add a value balance type
* change some docs
* rename methods
* Doc changes
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* add getters and setters for `ValueBalance`
* remove commented out code
* impl Add for ValueBalance
* split the tests
* change tests
* fix derives
* change default() to zero()
* remove default constraint
* use matches!
* separate testing code into submodules
* change mod struct
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* implement Sum for Amount
* check overflows
* add a `zero()` method to `Amount`
* impl iter::Sum<&Amount<C>> for Result<Amount<C>>
And modify the tests so they test both reference and value based sums.
* use `try_fold()`
* change error doc
* use iter::repeat()
* fix test
Co-authored-by: teor <teor@riseup.net>
* Add an OrderedUtxo type for validation of spends within a block
This change allows us to check that transparent spends use outputs from
earlier in their block. (But we don't actually do that check yet.)
We need to keep the order of UTXOs when we're contextually verifying
each new block that is added to a chain. But the block order is
irrelevant for UTXOs stored in the state.
* Take ownership in utxos_from_ordered_utxos
* Delete a confusing comment
* Support incomplete Pallas addition, all the way down
* Check Orchard key derivation against test vectors (currently not passing)
* Fix up Orchard keys, notes, nullifiers, address, and their tests
* Fix Incoming Viewing Key generation
* Move around test vectors, impl From<SpendingKey> for FullViewingKey
* Add orchard test vectors module
* Pull in and use the Sinsemilla test vectors
* Test Pallas group hashes for Orchard with test vectors
* Move Orchard Arbitrary implementations to arbitrary.rs
* Improvements from code review
* Derive Eq instead of implementing it for SpendAuthorizingKey
* Dedupe Orchard NoteCommitment::extract_x; fix documentation
* Update zebra-chain/src/orchard/note.rs
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: Conrado P. L. Gouvea <conradoplg@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Add the constraint name to the Amount debug format
* Test consensus-critical serialization for Amount
Previously we were testing `serde` and `bincode` serialization,
which uses a completely different code path.
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Add methods for getting block nullifiers
These methods will be used in a future PR to check for double-spends.
* Add doc links
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add a TypeNameToDebug formatter to zebra_chain
This formatter makes it much easier to diagnose proptest errors.
It will be used in a future PR.
Implement Arbitrary and DerefMut for all the formatters.
Also make the formatter type bounds consistent,
to produce better compiler errors.
* Clarify how TypeNameToDebug actually works
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add panic message to `unimplemented!`
So that it is clear why the panic happened upon initial inspection. Also
include a reference to the mempool epic, so that it's easier to find the
issue that tracks the implementation of the missing code.
* Add panic message that references a tracking issue
Make it easy to find the relevant issue if the panic occurs.
* Remove incomplete and currently unnecessary code
The current implementation works, the commented out code was just a
previous improvement idea, which is now tracked by issue #2473.
* Always use librustzcash for sighash and remove old sighash code
Also added ZIP-143 test vectors
* Remove librustzcash_sighash test that is no longer needed
* Skip invalid legacy chain check test cases
Add proptest seeds for the failing test.
And improve some unclear documentation.
* Fix the legacy chain test blocks order
Also fix unclear documentation that might have led to this bug.
* add disabled sprout pool check
* change method name
* change error name
* fix typo
* make the success test case in other tx than the coinbase
* use new `height` method instead of deriving `PartialOrd` in `NetworkUpgrade`
* move check of network upgrade into function, rename, docs
* increase test coverage
* fix comment
* Update versions for zebra v1.0.0-alpha.12 release
* Update Cargo.lock
* Update release checklist with latest version changes to help keep track for future releases
* Remove reference to the fact that tower-fallback was not updated
* Refactor to create `verify_sapling_shielded_data`
Move the code to verify Sapling shielded data into a new helper method
that returns `AsyncChecks`.
* Test verifying a Sapling transaction with spends
Use the test vectors to find a transaction that has Sapling spends and
test if it the verifier considers it valid.
* Create a helper method to list test transactions
Transforms the block test vectors into a list of transactions and block
heights for each transaction.
* Use new helper function in V4 Sapling spend test
Also use the block height for that transaction as specified in the test
vector.
* Test V4 tx. with Sapling outputs but no spends
Find a transaction V4 vector that has Sapling outputs but no spends, and
check that the verifier accepts it.
* Rename some methods and constants for clarity
Using the following commands:
```
fastmod '\bis_ready_for_attempt\b' is_ready_for_connection_attempt
# One instance required a tweak, because of the ASCII diagram.
fastmod '\bwas_recently_live\b' has_connection_recently_responded
fastmod '\bwas_recently_attempted\b' was_connection_recently_attempted
fastmod '\bwas_recently_failed\b' has_connection_recently_failed
fastmod '\bLIVE_PEER_DURATION\b' MIN_PEER_RECONNECTION_DELAY
```
* Use `Instant::elapsed` for conciseness
Instead of `Instant::now().saturating_duration_since`. They're both
equivalent, and `elapsed` only panics if the `Instant` is somehow
synthetically generated.
* Allow `Duration32` to be created in other crates
Export the `Duration32` from the `zebra_chain::serialization` module.
* Add some new `Duration32` constructors
Create some helper `const` constructors to make it easy to create
constant durations. Add methods to create a `Duration32` from seconds,
minutes and hours.
* Avoid gossiping unreachable peers
When sanitizing the list of peers to gossip, remove those that we
haven't seen in more than three hours.
* Test if unreachable addresses aren't gossiped
Create a property test with random addreses inserted into an
`AddressBook`, and verify that the sanitized list of addresses does not
contain any addresses considered unreachable.
* Test if new alternate address isn't gossipable
Create a new alternate peer, because that type of `MetaAddr` does not
have `last_response` or `untrusted_last_seen` times. Verify that the
peer is not considered gossipable.
* Test if local listener is gossipable
The `MetaAddr` representing the local peer's listening address should
always be considered gossipable.
* Test if gossiped peer recently seen is gossipable
Create a `MetaAddr` representing a gossiped peer that was reported to be
seen recently. Check that the peer is considered gossipable.
* Test peer reportedly last seen in the future
Create a `MetaAddr` representing a peer gossiped and reported to have
been last seen in a time that's in the future. Check that the peer is
considered gossipable, to check that the fallback calculation is working
as intended.
* Test gossiped peer reportedly seen long ago
Create a `MetaAddr` representing a gossiped peer that was reported to
last have been seen a long time ago. Check that the peer is not
considered gossipable.
* Test if just responded peer is gossipable
Create a `MetaAddr` representing a peer that has just responded and
check that it is considered gossipable.
* Test if recently responded peer is gossipable
Create a `MetaAddr` representing a peer that last responded within the
duration a peer is considered reachable. Verify that the peer is
considered gossipable.
* Test peer that responded long ago isn't gossipable
Create a `MetaAddr` representing a peer that last responded outside the
duration a peer is considered reachable. Verify that the peer is not
considered gossipable.
* add legacy chain check and tests
* improve has_network_upgrade check
* add docs to legacy_chain_check()
* change arbitrary module structure
* change the panic message
* move legacy chain acceptance into existing tests
* use a reduced_branch_id_strategy()
* add docs to strategy function
* add argument to check for legacy chain into sync_until()
* Stop trying to verify coinbase inputs using the script verifier
And create tests to catch similar bugs earier.
* Use Testnet in NU5 tests that temporarily should_panic
We've marked these tests as should_panic until there is a NU5 activation
height. But Testnet will have an activation height first, so we should
prefer it in the tests. (Or use both networks.)
* Orchard note commitment tree and hash test vectors?
* Add failing sinsemilla test vector test
* Support incomplete Pallas addition, all the way down
* Fix sinsemilla sub function S(j), add note commitment tree empty root tests
* Clippy nightly lints
* allow(clippy::derive_hash_xor_eq) for orchard::tree
* Update zebra-chain/src/orchard/sinsemilla.rs
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Update multiple crates to ensure bitvec 0.22.3 is being used and avoid package conflicts
* Add documentation to zebra-chain::sapling to indicate that ZIP-216 rules are enforced by jubjub
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* Always send our local listener with the latest time
Previously, whenever there was an inbound request for peers, we would
clone the address book and update it with the local listener.
This had two impacts:
- the listener could conflict with an existing entry,
rather than unconditionally replacing it, and
- the listener was briefly included in the address book metrics.
As a side-effect, this change also makes sanitization slightly faster,
because it avoids some useless peer filtering and sorting.
* Skip listeners that are not valid for outbound connections
* Filter sanitized addresses Zebra based on address state
This fix correctly prevents Zebra gossiping client addresses to peers,
but still keeps the client in the address book to avoid reconnections.
* Add a full set of DateTime32 and Duration32 calculation methods
* Refactor sanitize to use the new DateTime32/Duration32 methods
* Security: Use canonical SocketAddrs to avoid duplicate connections
If we allow multiple variants for each peer address, we can make multiple
connections to that peer.
Also make sure sanitized MetaAddrs are valid for outbound connections.
* Test that address books contain the local listener address
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* move network_upgrade check into zebra-chain
* fix the errors
* rename function
* typo fix
* rename the check function
* make changes from last code review
* Security: Limit reconnection rate to individual peers
Reconnection Rate
Limit the reconnection rate to each individual peer by applying the
liveness cutoff to the attempt, responded, and failure time fields.
If any field is recent, the peer is skipped.
The new liveness cutoff skips any peers that have recently been attempted
or failed. (Previously, the liveness check was only applied if the peer
was in the `Responded` state, which could lead to repeated retries of
`Failed` peers, particularly in small address books.)
Reconnection Order
Zebra prefers more useful peer states, then the earliest attempted,
failed, and responded times, then the most recent gossiped last seen
times.
Before this change, Zebra took the most recent time in all the peer time
fields, and used that time for liveness and ordering. This led to
confusion between trusted and untrusted data, and success and failure
times.
Unlike the previous order, the new order:
- tries all peers in each state, before re-trying any peer in that state,
and
- only checks the the gossiped untrusted last seen time
if all other times are equal.
* Preserve the later time if changes arrive out of order
* Update CandidateSet::next documentation
* Update CandidateSet state diagram
* Fix variant names in comments
* Explain why timestamps can be left out of MetaAddrChanges
* Add a simple test for the individual peer retry limit
* Only generate valid Arbitrary PeerServices values
* Add an individual peer retry limit AddressBook and CandidateSet test
* Stop deleting recently live addresses from the address book
If we delete recently live addresses from the address book, we can get a
new entry for them, and reconnect too rapidly.
* Rename functions to match similar tokio API
* Fix docs for service sorting
* Clarify a comment
* Cleanup a variable and comments
* Remove blank lines in the CandidateSet state diagram
* Add a multi-peer proptest that checks outbound attempt fairness
* Fix a comment typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Simplify time maths in MetaAddr
* Create a Duration32 type to simplify calculations and comparisons
* Rename variables for clarity
* Split a string constant into multiple lines
* Make constants match rustdoc order
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* stop panicking on invalid orchard nullifiers
* add context to error
* use `from_bytes_wide` for nullifiers in arbitrary
* orchard::Nullifier vec to array conversion is a bit clearer and simpler
Co-authored-by: teor <teor@riseup.net>
* Add a `Transaction::version` getter
Returns the version of the transaction as a `u32`.
* Add `Transaction::is_overwintered` helper method
Returns if the `fOverwintered` flag should be set for the transaction's
version.
* Use new helpers to serialize transaction version
Reduce the repeated code and make it less error-prone with future
changes.
* Add getter methods to `transaction::Request` type
Refactor to move the type deconstruction code into the `Request` type.
The main objective is to make it easier to split the call handler into
methods that receive the request directly.
* Refactor to create `verify_v4_transaction` helper
Split the code specific to V4 transactions into a separate helper
method.
* Create `verify_v5_transaction` helper method
Prepare a separate method to have the validation code.
* Add `UnsupportedByNetworkUpgrade` error variant
An error for when a transaction's version isn't supported by the network
upgrade of the block it's included or for the current network upgrade if
the transaction is for the mempool.
* Verify a V5 transaction's network upgrade
For now, only NU5 supports V5 transactions.
* Test that V5 transaction is rejected on Canopy
Create a fake V5 transaction and try to verify it using a block height
from Canopy's activation. The verifier should reject the transaction
with an error saying that the network upgrade does not support that
transaction version.
* Test if V5 tx. is accepted after NU5 activation
Create a fake V5 transaction and pretend it is placed in a block that
has a height after the NU5 activation. The test should succeed, but
since the NU5 activation height has not been specified yet (neither for
the testnet nor the mainnet), for now this test is marked as
`should_panic`.
* Add `TODO` comment to the code
Add more detail to what's left to do, and link to the appropriate PRs.
* Use `u32` to store transaction version
Use a type consistent with how the version is specified.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
* add zcash_history.rs with librustzcash Tree wrapper
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Apply changes from code review
* Update zebra-chain/src/primitives/zcash_history.rs
Co-authored-by: teor <teor@riseup.net>
* Apply changes from code review
* Add Entry struct; return Result where needed; add test
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* zcash_history: improve naming style with `inner`
* zcash_history: check if block has the correct network upgrade when adding to tree
* zcash_history: test improvements
* zcash_history: split Tree::new into new_from_block and new_from_cache
* zcash_history: move tests to their own file
* remove unneeded empty line in Cargo.toml
Co-authored-by: teor <teor@riseup.net>
* Add a `at_least_one!` macro for testing
Similar to the `vec!` macro, but doesn't allow creating an empty list.
* Test if `has_inputs_and_outputs` considers actions
Create a dummy transaction with no inputs and no outputs, and add a
dummy Orchard action to it. The `check::has_inputs_and_outputs`
should succeed, because the consensus rule considers having Orchard
actions as having inputs and/or outputs.
* Refactor to create helper function
Move the code to create a fake Orchard shielded data instance to a
helper function in `zebra_chain::transaction::arbitrary`, so that other
tests can also use it.
* Test coinbase V5 transaction with enable spends
A V5 coinbase transaction that has Orchard shielded data MUST NOT have
the enable spends flag set.
* Test if coinbase without enable spends is valid
A coinbase transaction with Orchard shielded data and without the enable
spends flag set should be valid.
* Add a security comment about the `at_least_one!` macro
This macro must not be used outside tests, because it allows memory denial
of service.
Co-authored-by: teor <teor@riseup.net>
* Add sapling final root test vectors
Also tidy some formatting and imports
* Doc: final sapling roots can be duplicated
* Reverse the byte order of final sapling root test vectors
This makes the test vectors match the byte order in the block header,
rather than the zcashd RPC responses.
* Ignore pre-sapling block header commitments
Previously, Zebra expected this reserved field to be all zeroes,
but some mainnet and testnet blocks had other values.
* Test structural and semantic validation of the block commitment field
History roots are excluded from these tests, because they require
contextual validation.
* Implement `PartialEq<i64>` for `Amount`
Allows to compare an `Amount` instance directly to an integer.
* Add `SerializationError::BadTransactionBalance`
Error variant representing deserialization of a transaction that doesn't
conform to the Sapling consensus rule where the balance MUST be zero if
there aren't any shielded spends and outputs.
* Validate consensus rule when deserializing
Return an error if the deserialized V4 transaction has a non-zero value
balance but doesn't have any Sapling shielded spends nor outputs.
* Add consensus rule link to field documentation
Describe how the consensus rule is validated structurally by
`ShieldedData`.
* Clarify that `value_balance` is zero
Make the description more concise and objective.
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Update field documentation
Include information about how the consensus rule is guaranteed during
serialization.
Co-authored-by: teor <teor@riseup.net>
* Remove `check::sapling_balances_match` function
The check is redundant because the respective consensus rule is
validated structurally by `ShieldedData`.
* Test deserialization of invalid V4 transaction
A transaction with no Sapling shielded spends and no outputs but with a
non-zero balance value should fail to deserialize.
* Change least-significant byte of the value balance
State how the byte index is calculated, and change the least
significant-byte to be non-zero.
Co-authored-by: teor <teor@riseup.net>
* Standardise lints across Zebra crates, and add missing docs
The only remaining module with missing docs is `zebra_test::command`
* Todo -> TODO
* Clarify what a transcript ErrorChecker does
Also change `Error` -> `BoxError`
* TransError -> ExpectedTranscriptError
* Output Descriptions -> Output descriptions
* Add a `Transaction::orchard_shielded_data` getter
Allows accessing the Orchard shielded data if it is present in the
transaction, regardless of the transaction version.
* Refactor `orchard_nullifiers` to use new getter
Allows making the method more concise.
* Add `CoinbaseHasEnableSpendsOrchard` error variant
Used when the validation rule is not met.
* Implement `enableSpendsOrchard` in coinbase check
The flag must not be set for the coinbase transaction.
* Refactor `Transaction::orchard_*` getters
Use the fact that `Option<T>` implements `Iterator<T>` to simplify the
code and remove the need for boxing the iterators.
Co-authored-by: teor <teor@riseup.net>
* Make sure the Canopy activation block is a finalized checkpoint block
This enables ZIP-221 chain history from Canopy activation onwards.
* Clarify that the mandatory checkpoint test includes Canopy activation
The test was correct, but the docs and assertion message did not include activation.
* Document that the mandatory checkpoint includes Canopy activation
Co-authored-by: teor <teor@riseup.net>
* Restore SummaryDebug on arbitrary chains
And also add it to some more proptest vectors.
* Reduce most arbitrary vectors from 10 to 4
This makes debugging easier
* Make SummaryDebug generic over collections and exact size iterators
* Document DisplayToDebug
* Fix documentation comment
Was missing a slash to become documentation.
* Add documentation link to type reference
Just to help navigation a bit.
* Implement `Transaction::orchard_actions()` getter
Returns an iterator to iterator over the actions in the Orchard shielded
data (if there is one, otherwise it returns an empty iterator).
* Add V5 support for `has_inputs_and_outputs`
Checks if the transaction has Orchard actions. If it does, it is
considered to have inputs and outputs.
* Refactor transaction test vectors
Make it easier to reuse the fake V5 transaction converter in other test
vectors.
* Move helper function to `zebra-chain` crate
Place it together with some other helper functions, including the one
that actually creates the fake V5 transaction.
* Test transaction with no inputs
`check::has_inputs_and_outputs` should return an error indicating that
the transaction has no inputs.
* Test transaction with no outputs
`check::has_inputs_and_outputs` should return an error indicating that
the transaction has no outputs.
* Note that transaction is fake in `expect` message
Should make the message easier to find, and also gives emphasis to the
fact that the transaction is a fake conversion to V5.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
* add nullifier methods to orchard
* store orchard nullifiers
* bump database version
* update `IntoDisk`
* support V5 in `UpdateWith`
* add a test for finalized state
* Use the latest network upgrade in state proptests
Now that we always generate an extra proper VerificationKey for each
Tweak::ChangePubkey case, this /should/ never fail: it also helps split out the
actual verification of the signature from the parsing and validation of the key
itself.
* Set the tip height and previous hash for arbitrary genesis blocks
And cleanup the ledger strategy interface.
* Generate partial chains with correct previous block hashes
* Provide the network value from the PreparedChain strategy
Instead of creating an invalid verification key for a particular signature by tweaking its bytes,
create another verification key and when the ChangePubkey tweak is applied, just swap out the correct
SignatureCase::pk_bytes for SignatureCase::invalid_pk_bytes and check that trying to verify the signature
using that wrong key fails, as expected.
Resolves#2170
* Clarify the finalized state assertion that checks the genesis block
* Make arbitrary block chains pass some genesis checks
Use the genesis previous block hash for
- the first arbitrary block in each chain, and
- individual arbitrary blocks.
This setting can be adjusted by individual proptests as needed.
* Fix scriptCode serialization and sighash test vectors
The scriptCode was being serialized without the compact size prefix, and the test vectors included the prefix in the script, which cancelled each other
* Add ConstantTimeEq's for Orchard FullViewingKey and DiversifierKey and affirmatively test
* Fix orchard::keys doc comments with links to make them automatic links
* Exercise ConstantTimeEq for FullViewingKey with a cheap clone
* Allow some clippy lints to pass for somewhat contrived tests
Co-authored-by: teor <teor@riseup.net>
* Impl subtle::ConstantTimeEq for orchard SpendingKey, use that in Eq/PartialEq
* Use constant time comparisons for secret key data where applicable
This also makes Clippy happier so that we aren't creating types just to compare.
* Fix clippy::cmp_owned for orchard::keys Eq/PartialEq
By impl'ing ConstantTimeEq for those types where leaks of the value
would compromise access or privacy.
* Make clippy::cmp_owned happy for some sapling::keys
* initialize the work on parsing orchard data in V5
* add the rest of orchard serialization
* fix serialization according to spec
* fix arbitrary for Signature<SpendAuth>
* move deserialization of AuthorizedAction to shielded_data module
* use `from_bits_truncate` to generate valid arbitrary flags
* change panic message
* fix serialization/deserialization when nActionsOrchard is empty
* fix Halo2Proof deserialization
* implement ZcashSerialize and ZcashDeserialize for flags
* implement ZcashSerialize and ZcashDeserialize for orchard::tree::Root
* use ZcashSerialize and ZcashDeserialize for binding_sig
* implement from_parts()
* implement Arbitrary for Signature<Binding>
* add trusted preallocate with tests
* fix Arbitrary for orchard Nullifier
* Use zcash_serialize_bytes instead of write_compactsize
Co-authored-by: teor <teor@riseup.net>
* Security: panic if an internally generated time is out of range
If Zebra has a bug where it generates blocks, transactions, or meta
addresses with bad times, panic. This avoids sending bad data onto the
network.
(Previously, Zebra would truncate some of these times, silently
corrupting the underlying data.)
Make it clear that deserialization of these objects is infalliable.
In Orchard, we compare canonical Pallas bytes with a supplied byte array.
Since we need to perform calculations to get it into canonical form, we
need to create a newly owned object.