* Move RPC method constants into their own module
* Rename RPC compatibility modules to avoid confusion
* Rename RPC middleware to include its new functionality
* Use FutureExt::inspect() for logging, and only format on failure
* Log all RPC errors at info level
* Make "invalid parameters" RPC error code match `zcashd`
* add `ZCASH_RPC_COOKIE_FILE` env var
* get details when `getrawmempool` call differs
* remove non needed cookie file argument in zebra call
* replace cookie args with extra agrs
* read hex from file
* use jq for transactions loop
* dump transactions from the zcashd mempool
* apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
---------
Co-authored-by: teor <teor@riseup.net>
* Revert "Temporarily fix the code for a disabled test"
This reverts commit d915624417cc946e53aac76449e0b5b719e03d2a.
* Check every valid time source in the proposal tests
* Activate block proposal tests in CI
* Repeats block proposal test a few times at an interval to sample different mempool contents
* Increase the number of templates tested to 10
Co-authored-by: Arya <aryasolhi@gmail.com>
---------
Co-authored-by: arya2 <aryasolhi@gmail.com>
* Clarify function docs, rename variables, and fix log typos
* Add a ReadState best chain clone method, but don't use it yet
* Use the new calculate_median_time_past() function in existing code
* Skip a state request if the lock time is a height
* Remove dummy arguments and extra blocks from median-time-past calculation
* Update tests to remove requests that are no longer sent
* Simplify getting the best chain
Co-authored-by: Arya <aryasolhi@gmail.com>
* Clarify some function docs
Co-authored-by: Arya <aryasolhi@gmail.com>
* assigns `next_median_time_past` value from if statement
---------
Co-authored-by: Arya <aryasolhi@gmail.com>
* Make it clearer that Zebra only supports transparent funding streams
* Initial getblocksubsidy RPC types and method, without ZEC conversion
* Add a ZEC fixed-point format wrapper to Amount
* Format getblocksubsidy fields in Zec
* Add snapshot tests for getblocksubsidy RPC
* Re-order RPC output to match zcashd
* Switch to formatting Zec with f64, because the getblocksubsidy RPC requires JSON numbers
* Sort RPC responses in zcashd funding stream order
* Add getblocksubsidy snapshots
* Fix a doc link
* Move Zec JSON formatter from zebra-chain to zebra-rpc
* Remove Ord impl for Zec, it's just for formatting
* Use fully-qualified path for serde derives
* Fix a clippy warning for the doc link fix
* Fix RPC comments and an error message
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
---------
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Docker does not allow to use multiple tags for cache images in their
`cache-from` and `cache-to` options. Which makes some images to lose
previous tags, if the same.
This cause automated mechanims for deletion to fail, as those cache images
were dependant on the main image, and deleting the cache alone was raising
an error if the main image was not deleted first.
A workaround for this is making a separate repository which can hold this
cache images. Which also reduces clutter from the main registries.
* ci(lwd): run the send transactions test on each PR update
The send transactions test was moved to the main branch in #5480 because
it was very slow.
It's much faster (~30m) with #5015 and now it can be run for every PR
update again.
* fix(actions): remove references to the workflow_dispatch
* bump v1.0.0-rc.4
* Add new mainnet and testnet checkpoints generated using zcashd
* make changes to changelog from review
* move item to new section
* change section name
---------
Co-authored-by: teor <teor@riseup.net>
* Implement the BestChainNextMedianTimePast state request
* Verify the lock times of mempool transactions
* Document that the mempool already handles lock time rejections correctly
* Fix existing tests
* Add new mempool lock time success and failure tests
* ci: add a test to validate Zebra's config file and path
* fix: use `ZEBRA_CONF_PATH` as single variable locating the conf
* fix: do not remove the containers
* fix: use extended regex
* fix: use different steps to validate the conf tests
* fix: do not specify a default CMD for running Docker in test builds
* fix: use actual starting commands for entrypoint
* fix: do not add cargo twice if cargo is in $1
* fix: allow to run `zebrad` in the `tests` stage of Dockerfile
* fix: new entrypoint does not allow an empty CMD
* fix: do not duplicate the `zebrad` command
* fix: segregate configuration jobs
* refactor(entrypoint): handle better parameters conditions
* fix: make `zebrad` an executable command in `tests` stage
* Show the commands that are being executed in the new docker test
* Show full logs without tee or grep
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* fix: use the actual path inside docker
* fix: use `grep` with exit code
If the container is logging to stderr, piping works only for stdout, so we're adding `2>&1`
* fix: use `grep -q` to get an exit code
* fix: fail if any error is detected
* fix: fail if this test takes more than 5 minutes
* fix: update patch workflows
* feat: test Dockerfile `runtime` config
* fix: depend on the configuration test to continue
Co-authored-by: teor <teor@riseup.net>
* make `zebra-checkpoint` util work with zebra as the backend
* update snapshots
* update documentation
* applies suggestions from code review
* irefactor zebra-checkpoints to work with zebra using deserialization of the raw block
* fix imports and derives
* rename mode to backend
* remove old stuff
* fix docs
Co-authored-by: arya2 <aryasolhi@gmail.com>
* Sorts transactions like zcashd in getrawmempool
* Simplifies sort logic and condenses duplicate code
* adds comment clarifying the intended byte order for transaction hashes
* Multiplies fee by MAX_BLOCK_BYTES/tx-size instead of tx-size
- Removes feature flag on get_raw_mempool
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Always uses `TransactionIds` request in tests
* reverts switch from #[cfg()] to cfg!()
* Adds feature flag to constant
* Updates tests and removes !cfg(not(test))
* Moves up comment
* adds missing transaction_ids
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Removes candidate_tx from candidate_txs
- Creates a new WeightedIndex instead of updating the weights
- Logs tx hashes and unpaid_actions in getblocktemplate
* Applies suggestions from PR review.
* Revert "Update code that we're going to delete in the next PR anyway"
This reverts commit 1fed70da9e.
* Initial zcash-test-block-template script without block proposal construction
* Try creating block data using jq and printf
* Move proposal_block_from_template() to zebra-rpc and remove eyre dependency
* Implement FromStr for DateTime32 and Duration32
* Basic block-template-to-proposal command without time source handling
* Move block proposal code into its own module
* Use time source in block-template-to-proposal
* Make block-template-to-proposal require the getblocktemplate-rpcs feature
* Use block-template-to-proposal in the test script zcash-rpc-block-template-to-proposal
* Apply new hex formatting to commitments and nonces in block proposal tests
* Re-add missing imports from rebase
* Re-add missing conversions from rebase
* Update to new method name after rebase
* Derive a Default impl
* Restore a comment that was accidentally deleted during the rebase
* Avoid a clippy::unwrap-in-result
* Temporarily fix the code for a disabled test
* Fix tool build with Docker caches
* Make clippy happy with the temporary fix
* Give a pass/fail status for each proposal response
* Accept zcashd block templates in block-template-to-proposal
* Fix pretty printing
* Zebra expects a longpollid, so give it a dummy value
* Add "required" fields which Zebra requires
* Use curtime as the dummy maxtime in zcashd templates
* Support large block proposals by reading proposal data from a file
* Test all valid time modes for each proposal
* Allow the user to set the time command
* Put debug logs into their own files
* Exit with an error status when any proposal is invalid
* Log the date and time to make it easier to match errors to node logs
* Derive default using #[default]
* Implement PartialEq manually to satisfy clippy
* Allow a manual derive in test-only code
* Fix some missing docs warnings in the Docker build
* Format commitments and nonces as hex
* Format Sprout and Sapling nullifiers as hex when debugging
* Format Sprout commitments as hex when debugging
* Format redpallas keys as hex when debugging
* Update code that we're going to delete in the next PR anyway
dependabot[bot]
teor
Alfredo Garcia
Gustavo Valverde
Pili Guerra
Arya
Conrado Gouvea