* Always send our local listener with the latest time
Previously, whenever there was an inbound request for peers, we would
clone the address book and update it with the local listener.
This had two impacts:
- the listener could conflict with an existing entry,
rather than unconditionally replacing it, and
- the listener was briefly included in the address book metrics.
As a side-effect, this change also makes sanitization slightly faster,
because it avoids some useless peer filtering and sorting.
* Skip listeners that are not valid for outbound connections
* Filter sanitized addresses Zebra based on address state
This fix correctly prevents Zebra gossiping client addresses to peers,
but still keeps the client in the address book to avoid reconnections.
* Add a full set of DateTime32 and Duration32 calculation methods
* Refactor sanitize to use the new DateTime32/Duration32 methods
* Security: Use canonical SocketAddrs to avoid duplicate connections
If we allow multiple variants for each peer address, we can make multiple
connections to that peer.
Also make sure sanitized MetaAddrs are valid for outbound connections.
* Test that address books contain the local listener address
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Security: Limit reconnection rate to individual peers
Reconnection Rate
Limit the reconnection rate to each individual peer by applying the
liveness cutoff to the attempt, responded, and failure time fields.
If any field is recent, the peer is skipped.
The new liveness cutoff skips any peers that have recently been attempted
or failed. (Previously, the liveness check was only applied if the peer
was in the `Responded` state, which could lead to repeated retries of
`Failed` peers, particularly in small address books.)
Reconnection Order
Zebra prefers more useful peer states, then the earliest attempted,
failed, and responded times, then the most recent gossiped last seen
times.
Before this change, Zebra took the most recent time in all the peer time
fields, and used that time for liveness and ordering. This led to
confusion between trusted and untrusted data, and success and failure
times.
Unlike the previous order, the new order:
- tries all peers in each state, before re-trying any peer in that state,
and
- only checks the the gossiped untrusted last seen time
if all other times are equal.
* Preserve the later time if changes arrive out of order
* Update CandidateSet::next documentation
* Update CandidateSet state diagram
* Fix variant names in comments
* Explain why timestamps can be left out of MetaAddrChanges
* Add a simple test for the individual peer retry limit
* Only generate valid Arbitrary PeerServices values
* Add an individual peer retry limit AddressBook and CandidateSet test
* Stop deleting recently live addresses from the address book
If we delete recently live addresses from the address book, we can get a
new entry for them, and reconnect too rapidly.
* Rename functions to match similar tokio API
* Fix docs for service sorting
* Clarify a comment
* Cleanup a variable and comments
* Remove blank lines in the CandidateSet state diagram
* Add a multi-peer proptest that checks outbound attempt fairness
* Fix a comment typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Simplify time maths in MetaAddr
* Create a Duration32 type to simplify calculations and comparisons
* Rename variables for clarity
* Split a string constant into multiple lines
* Make constants match rustdoc order
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Security: stop gossiping failure and attempt times as last_seen times
Previously, Zebra had a single time field for peer addresses, which was
updated every time a peer was attempted, sent a message, or failed.
This is a security issue, because the `last_seen` time should be
"the last time [a peer] connected to that node", so that
"nodes can use the time field to avoid relaying old 'addr' messages".
So Zebra was sending incorrect peer information to other nodes.
As part of this change, we split the `last_seen` time into the
following fields:
- untrusted_last_seen: gossiped from other peers
- last_response: time we got a response from a directly connected peer
- last_attempt: time we attempted to connect to a peer
- last_failure: time a connection with a peer failed
* Implement Arbitrary and strategies for MetaAddrChange
Also replace the MetaAddr Arbitrary impl with a derive.
* Write proptests for MetaAddr and MetaAddrChange
MetaAddr:
- the only times that get included in serialized MetaAddrs are
the untrusted last seen and responded times
MetaAddrChange:
- the untrusted last seen time is never updated
- the services are only updated if there has been a handshake
* Only advance the outbound connection timer when it returns an address
Previously, we were advancing the timer even when we returned `None`.
This created large wait times when there were no eligible peers.
* Refactor to avoid overlapping sleep timers
* Add a maximum next peer delay test
Also refactor peer numbers into constants.
* Make the number of proptests overridable by the standard env var
Also cleanup the test constants.
* Test that skipping peer connections also skips their rate limits
* Allow an extra second after each sleep on loaded machines
macOS VMs seem to need this extra time to pass their tests.
* Restart test time bounds from the current time
This change avoids test failures due to cumulative errors.
Also use a single call to `Instant::now` for each test round.
And print the times when the tests fail.
* Stop generating invalid outbound peers in proptests
The candidate set proptests will fail if enough generated peers are
invalid for outbound connections.
- Add a custom semver match for `zebrad` versions
- Prefer "line contains string" matches, so tests ignore minor changes
- Escape regex meta-characters when a literal string match is intended
- Rename test functions so they are more precise
- Rewrite match internals to remove duplicate code and enable custom matches
- Document match functions
Rust atomics have an API that's very easy to use incorrectly, leading to
hard to find bugs. For that reason, it's best to avoid it unless there's
a good reason not to.
* Rename field to `wait_next_handshake`
Make the name a bit more clear regarding to the field's purpose.
* Move `MIN_PEER_CONNECTION_INTERVAL` to `constants`
Move it to the `constants` module so that it is placed closer to other
constants for consistency and to make it easier to see any relationships
when changing them.
* Rate limit calls to `CandidateSet::update()`
This effectively rate limits requests asking for more peer addresses
sent to the same peer. A new `min_next_crawl` field was added to
`CandidateSet`, and `update` only sends requests for more peer addresses
if the call happens after the instant specified by that field. After
sending the requests, the field value is updated so that there is a
`MIN_PEER_GET_ADDR_INTERVAL` wait time until the next `update` call
sends requests again.
* Include `update_initial` in rate limiting
Move the rate limiting code from `update` to `update_timeout`, so that
both `update` and `update_initial` get rate limited.
* Test `CandidateSet::update` rate limiting
Create a `CandidateSet` that uses a mocked `PeerService`. The mocked
service always returns an empty list of peers, but it also checks that
the requests only happen after expected instants, determined by the
fanout amount and the rate limiting interval.
* Refactor to create a `mock_peer_service` helper
Move the code from the test to a utility function so that another test
will be able to use it as well.
* Check number of times service was called
Use an `AtomicUsize` shared between the service and the test body that
the service increments on every call. The test can then verify if the
service was called the number of times it expected.
* Test calling `update` after `update_initial`
The call to `update` should be skipped because the call to
`update_initial` should also be considered in the rate limiting.
* Mention that call to `update` may be skipped
Make it clearer that in this case the rate limiting causes calls to be
skipped, and not that there's an internal sleep that happens.
Also remove "to the same peers", because it's more general than that.
Co-authored-by: teor <teor@riseup.net>
* Rate-limit new outbound peer connections
Set the rate-limiting sleep timer to use a delay added to the maximum
between the next peer connection instant and now. This ensures that the
timer always sleeps at least the time used for the delay.
This change fixes rate-limiting new outbound peer connections, since
before there could be a burst of attempts until the deadline progressed
to the current instant.
Fixes#2216
* Create `MetaAddr::alternate_node_strategy` helper
Creates arbitrary `MetaAddr`s as if they were network nodes that sent
their listening address.
* Test outbound peer connection rate limiting
Tests if connections are rate limited to 10 per second, and also tests
that sleeping before continuing with the attempts still respets the rate
limit and does not result in a burst of reconnection attempts.
* Standardise lints across Zebra crates, and add missing docs
The only remaining module with missing docs is `zebra_test::command`
* Todo -> TODO
* Clarify what a transcript ErrorChecker does
Also change `Error` -> `BoxError`
* TransError -> ExpectedTranscriptError
* Output Descriptions -> Output descriptions
Given a generated list of gossiped peers, ensure that after running the
`validate_addrs` function none of the resulting peers have a `last_seen`
time that's after the specified limit.
If the calculation to apply the compensation offset overflows or
underflows, the reported times are too distant apart, and could be sent
on purpose by a malicious peer, so all addresses from that peer should
be rejected.
Use some mock gossiped peers where some have `last_seen` times in the
past and some have times in the future. Check that all the peers have
an offset applied to them by the `validate_addrs` function.
This tests if the offset is applied to all peers that a malicious peer
gossiped to us.
Use some mock gossiped peers that all have `last_seen` times in the
past and check that they don't have any changes to the `last_seen` times
applied by the `validate_addrs` function.
If any of the times gossiped by a peer are in the future, apply the
necessary offset to all the times gossiped by that peer. This ensures
that all gossiped peers from a malicious peer are moved further back in
the queue.
Co-authored-by: teor <teor@riseup.net>
- Make the security impact clearer and in a separate section.
- Instead of listing an assumption as almost a side-note, describe it
clearly inside a `Panics` section.
Co-authored-by: teor <teor@riseup.net>
Due to clock skew, the peers could end up at the front of the
reconnection queue or far at the back. The solution to this is to offset
the reported times by the difference between the most recent reported
sight (in the remote clock) and the current time (in the local clock).
Returning `impl IntoIterator` means that the caller will always be
forced to call `.into_iter()`, and returning `impl Iterator` still
allows them to call `.into_iter()` because it becomes the identity
function.
Zebra assumes that deserialized times are always able to be serialized.
But this assumption is wrong because:
- sanitization can modify times
- gossiped `MetaAddr` validation can modify times
* Refactor: Split CandidateSet::update into separate functions
* Security: Apply a timeout to the entire CandidateSet::update
* Security: Stop using very large fanout limits during initialization
Previously, Zebra used the number of resolved peer addresses.
So it was possible for all peers to fail, and for Zebra to hang on the
first update.
And Zebra could send a fanout for each initial peer, regardless
of whether their connection was successful.
Also:
- wait for at least one successful peer before trying an update
- warn if there are no successful initial peers
When peers ask for peer addresses, add our local listener address to the
set of addresses, sanitize, then truncate. Sanitize shuffles addresses,
so if there are lots of addresses in the address book, our address will
only be sent to some peers.
Add canonical addresses from inbound connections to the address book,
so that Zebra can use them for reconnection attempts.
Use the newly added `NeverAttemptedAlternate` state for these addresses,
so we try gossiped addresses first, then canonical addresses. This avoids
duplicate connections to inbound peers.
If there is a small number of initial peers, and they are slow, the
initial candidate set update can appear to hang. To avoid this issue,
limit the initial candidate set fanout to the number of initial peers.
Once the initial peers have sent us more peer addresses, there is no need
to limit the fanouts for future updates.
Reported by Niklas Long of Equilibrium.
* Security: panic if an internally generated time is out of range
If Zebra has a bug where it generates blocks, transactions, or meta
addresses with bad times, panic. This avoids sending bad data onto the
network.
(Previously, Zebra would truncate some of these times, silently
corrupting the underlying data.)
Make it clear that deserialization of these objects is infalliable.
* Instrument the crawl task
When we created the crawl task, we forgot to instrument it with the
global span. This fix makes sure that the git and network span appears on
crawl logs.
* Instrument the connector
* Improve handshake instrumentation
Make some spans debug, so there are not too many spans.
* Add the address to initial peer connection errors
- stop putting inbound addresses in the address book
- drop address book entries that can't be used for outbound connections
- distinguish between temporary inbound and permanent outbound peer
addresses
- also create variants to handle proxy connections
(but don't use them yet)
- avoid tracking connection state for isolated connections
- document security constraints for the address book and peer set
* Security: stop panicking on out-of-range version timestamps
Instead, return a deserialization error, and close the connection.
This issue was reported by Equilibrium.
* Disable clippy warnings about comparing a newly created struct
In Sapling, we compare canonical JubJub bytes with a supplied byte array.
Since we need to perform calculations to get it into canonical form, we
need to create a newly owned object.
* Clippy: use assert rather than assert_eq on a bool
* Allow use listen address in config without port
* update comments
* remove not used alias
* use Network::default_port
* Move tests and use toml instead json
* change error message
* Make match more readable
Co-authored-by: teor <teor@riseup.net>
* Add functions for serializing and deserializing split arrays
In Transaction::V5, Zcash splits some types into multiple arrays, with a
single prefix count before the first array.
Add utility functions for serializing and deserializing the subsequent
arrays, with a paramater for the original array's length.
* Use zcash_deserialize_bytes_external_count in zebra-network
* Move some preallocate proptests to their own file
And fix the test module structure so it is consistent with the rest of
zebra-chain.
* Add a convenience alias zcash_serialize_external_count
* Explain why u64::MAX items will never be reached
Zebra avoids having a majority of addresses from a single peer by asking
3 peers for new addresses.
Also update a bunch of security comments and related documentation.
* Make proptest dependencies consistent between chain and network
* Implement Arbitrary for InventoryHash and use it in tests
* Impl Arbitrary for MetaAddr and use it in tests
Also test some extreme times in MetaAddr sanitization.
* Stop ignoring inbound message errors and handshake timeouts
To avoid hangs, Zebra needs to maintain the following invariants in the
handshake and heartbeat code:
- each handshake should run in a separate spawned task
(not yet implemented)
- every message, error, timeout, and shutdown must update the peer address state
- every await that depends on the network must have a timeout
Once the Connection is created, it should handle timeouts.
But we need to handle timeouts during handshake setup.
* Avoid hangs by adding a timeout to the candidate set update
Also increase the fanout from 1 to 2, to increase address diversity.
But only return permanent errors from `CandidateSet::update`, because
the crawler task exits if `update` returns an error.
Also log Peers response errors in the CandidateSet.
* Use the select macro in the crawler to reduce hangs
The `select` function is biased towards its first argument, risking
starvation.
As a side-benefit, this change also makes the code a lot easier to read
and maintain.
* Split CrawlerAction::Demand into separate actions
This refactor makes the code a bit easier to read, at the cost of
sometimes blocking the crawler on `candidates.next()`.
That's ok, because `next` only has a short (< 100 ms) delay. And we're
just about to spawn a separate task for each handshake.
* Spawn a separate task for each handshake
This change avoids deadlocks by letting each handshake make progress
independently.
* Move the dial task into a separate function
This refactor improves readability.
* Fix buggy future::select function usage
And document the correctness of the new code.
* Move the preallocate tests into their own files
And move the MetaAddr proptest into its own file.
Also do some minor formatting and cleanups.
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* Implement SafePreallocate. Resolves#1880
* Add proptests for SafePreallocate
* Apply suggestions from code review
Comments which did not include replacement code will be addressed in a follow-up commit.
Co-authored-by: teor <teor@riseup.net>
* Rename [Safe-> Trusted]Allocate. Add doc and tests
Add tests to show that the largest allowed vec under TrustedPreallocate
is small enough to fit in a Zcash block/message (depending on type).
Add doc comments to all TrustedPreallocate test cases.
Tighten bounds on max_trusted_alloc for some types.
Note - this commit does NOT include TrustedPreallocate
impls for JoinSplitData, String, and Script.
These impls will be added in a follow up commit
* Implement SafePreallocate. Resolves#1880
* Add proptests for SafePreallocate
* Apply suggestions from code review
Comments which did not include replacement code will be addressed in a follow-up commit.
Co-authored-by: teor <teor@riseup.net>
* Rename [Safe-> Trusted]Allocate. Add doc and tests
Add tests to show that the largest allowed vec under TrustedPreallocate
is small enough to fit in a Zcash block/message (depending on type).
Add doc comments to all TrustedPreallocate test cases.
Tighten bounds on max_trusted_alloc for some types.
Note - this commit does NOT include TrustedPreallocate
impls for JoinSplitData, String, and Script.
These impls will be added in a follow up commit
* Impl TrustedPreallocate for Joinsplit
* Impl ZcashDeserialize for Vec<u8>
* Arbitrary, TrustedPreallocate, Serialize, and tests for Spend<SharedAnchor>
Co-authored-by: teor <teor@riseup.net>
`sanitize` could be misused in two ways:
* accidentally modifying the addresses in the address book itself
* forgetting to sanitize new fields added to `MetaAddr`
This change prevents accidental modification by taking `&self`, and
explicitly creates a new sanitized `MetaAddr` with all fields listed.
Zebra's latest alpha checkpoints on Canopy activation, continues our work on NU5, and fixes a security issue.
Some notable changes include:
## Added
- Log address book metrics when PeerSet or CandidateSet don't have many peers (#1906)
- Document test coverage workflow (#1919)
- Add a final job to CI, so we can easily require all the CI jobs to pass (#1927)
## Changed
- Zebra has moved its mandatory checkpoint from Sapling to Canopy (#1898, #1926)
- This is a breaking change for users that depend on the exact height of the mandatory checkpoint.
## Fixed
- tower-batch: wake waiting workers on close to avoid hangs (#1908)
- Assert that pre-Canopy blocks use checkpointing (#1909)
- Fix CI disk space usage by disabling incremental compilation in coverage builds (#1923)
## Security
- Stop relying on unchecked length fields when preallocating vectors (#1925)
Zebra already uses `Read::take` to enforce message, body, and block
maximum sizes.
So using `Read::take` on untrusted sizes can result in short reads,
without a corresponding `UnexpectedEof` error. (The old code was
correct, but copying it elsewhere would have been risky.)
teor
Pili Guerra
Janito Vaqueiro Ferreira Filho
Deirdre Connolly
Kirill Fomichev
Alfredo Garcia
Preston Evans