* Export the `zebra_state::Config::db_path` method
Make it easier for tests to discover the sub-directory used to store
the chain state data.
* Generate code for interfacing with lightwalletd
Use the `tonic-build` crate to generate Rust code for communicating with
lightwalletd using gRPC.
The `*.proto` files were obtained from the Zcash lightwalletd
repository.
* Use `block::Height` instead of `Height`
Import the `block` instead to make it slightly clearer.
* Add helper function to remove a file if it exists
Try to remove it and ignore an error if it says that the file doesn't
exist. This will be used later to remove the lock file from a copied
chain state directory.
* Add helper function to copy chain state dirs
Copy an existing chain state directory into a new temporary directory.
* Add a `BoxStateService` type alias
Make it easier to write and read a boxed version of a state service.
* Add a helper function to start the state service
Make it easier to specify the state service to use an existing state
cache directory.
* Import `eyre!` macro at the module level
Allow it to be used in different places without having to repeat the
imports.
* Add `load_tip_height_from_state_directory` helper
A function to discover the current chain tip height stored in a state
cache.
* Add helper function to prepare partial sync. state
Loads a partially synchronized cached state directory into a temporary
directory that can be used by a zebrad instance, and also returns the
chain tip block height of that state.
* Add `perform_full_sync_starting_from` helper
Runs a zebrad with an existing partially synchronized state, and
finishes synchronizing it to the network chain tip.
* Add function to load transactions from a block
Use a provided state service to load all transactions from a block at a
specified height.
The state service is a generic type parameter, because
`zebra_state::service::ReadStateService` is not exported publicly. Using
a generic type parameter also allows the service to be wrapped in layers
if needed in the future.
* Add `load_transactions_from_block_after` helper
A function to load transactions from a block stored in a cached state
directory. The cached state must be synchronized to a chain tip higher
than the requested height.
* Add helper function to load some test transactions
Given a partially synchronized chain state, it will extend that chain by
performing a full synchronization, and obtain some transactions from one
of the newly added blocks.
* Update `spawn_zebrad_for_rpc_without_initial_peers`
Wait until the mempool is activated.
* Add method to start lightwalletd with RPC server
Returns the lightwalletd instance and the port that it's listening for
RPC connections.
The instance can reuse an existing cached lightwalletd state if the
`LIGHTWALLETD_DATA_DIR` environment variable is set.
* Add a `LightwalletdRpcClient` type alias
To make it easier to identify the type generated from the Protobuf
files.
* Add helper function to connect to lightwalletd
Prepare an RPC client to send requests to a lightwalletd instance.
* Add a `prepare_send_transaction_request` helper
Creates a request message for lightwalletd to send a transaction.
* Add test to send transactions using lightwalletd
Obtain some valid transactions from future blocks and try to send them
to a lightwalletd instance connected to a zebrad instance that hasn't
seen those transactions yet. The transactions should be successfully
queued in Zebra's mempool.
* Make `zebra_directory` parameter generic
Allow using a `TempDir` or a `PathBuf`.
* Move lightwalletd protobuf files
Place them closer to the module directory, so that it's clearer that
they specify the RPC protocol for lightwalletd, and not Zebra itself.
* Don't use coinbase transactions in the test
Coinbase transactions are rejected by the mempool.
* Don't remove state lock file
It is removed automatically by Zebra when it shuts down, so if it exists
it should be reported as a bug.
* Force mempool to be enabled in Zebrad instance
Speed up the initialization of the Zebrad instance used for lightwalletd
to connect to.
* Refactor to create `LIGHTWALLETD_DATA_DIR_VAR`
Document how the environment variable can be used to speed up the test.
* Check for process errors in spawned Zebra instance
Enable checking for known process failure messages.
* Add `FINISH_PARTIAL_SYNC_TIMEOUT` constant
Document why it exists and how the choice of the value affects the test.
* Add `LIGHTWALLETD_TEST_TIMEOUT` constant
And use it for the Zebrad and the Lightwalletd instances used in the
send transaction integration test.
* Check `lightwalletd` process for errors
Enable checking the lightwalletd process for known failure messages.
* Update `tonic` and `prost` dependencies
Use the latest version and fix CI failures because `rustfmt` isn't
installed in the build environment.
* Create `send_transaction_test` module
Move the send transaction using lightwalletd test and its helper
functions into a new module.
* Move `LIGHTWALLETD_TEST_TIMEOUT` constant
Place it in the parent `lightwalletd` module.
* Move gRPC helper functions and types to `rpc` mod.
Make them more accessible so that they can be used by other tests.
* Create a `cached_state` module
Move the test utility functions related to using a cached Zebra state
into the module.
* Move `perform_full_sync_starting_from` to `sync`
Keep to closer to the synchronization utility functions.
* Move Zebra cached state path variable constant
Place it in the `cached_state` module.
* Skip test if `ZEBRA_TEST_LIGHTWALLETD` is not set
Make it part of the set of tests ignored as a whole if no lightwalletd
tests should be executed.
* Move `spawn_zebrad_for_rpc_without_initial_peers`
Place it in the `launch` sub-module.
* Rename `rpc` module into `wallet_grpc`
Avoid any potential misunderstandings when the name is seen out of
context.
* Allow duplicate `heck` dependency
At least until `structopt` is updated or `zebra-utils` is updated to use
`clap` 3.
* Fix a deny.toml typo
* fix(build): CMake is required by `prost` crate
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Gustavo Valverde <gustavo@iterativo.do>
* Join similar imports
Avoid the confusion that might cause one to think that they come from
different modules or crates.
* Create an `Arguments` helper type
A type to keep track of a list of arguments for a sub-process. It makes
it easier for overriding parameters with new values.
* Create an `args!` helper macro
Make it simpler to create `Arguments` instances with known values.
* Require `Arguments` for `spawn_child` method
Change the method to have an `Arguments` parameter, and merge it with
some default values before passing them forward.
* Use `Arguments` in `spawn_lightwalletd_child`
Change the method to use an `Arguments` instance, and merge it with some
default options.
* Use `Arguments` in `spawn_child_with_command`
Require an `Arguments` instance in the `spawn_child_with_command`
extension method. Makes it simpler to call from `spawn_child` and
`spawn_lightwalletd_child` extension methods.
* Test if argument order is preserved
Check that when building an `Arguments` instance, the order that the
arguments are set is preserved in the generated list of strings.
* Refactor test to improve readability
Also separates some common code to be reused by later tests.
* Test overriding arguments
Check to see if overriding arguments behaves as expected, by keeping the
argument order when overriding and not introducing duplicates.
* Refactor test to improve readability
Move out a chunk of code so that the test itself is easier to read and
to make that code reusable by a later test.
* Test that `Arguments` instances can be merged
Merge two `Arguments` instances built from two lists of arguments, and
check that the expanded strings preserve order and override rules.
* Add Eq derives on Arguments
Co-authored-by: teor <teor@riseup.net>
* Update changelog for 1.0.0-beta.8
* Bump Zebra crate versions
The tower crates and their dependencies haven't changed,
so their versions don't need to be bumped.
Some Zebra crates haven't changed,
but I bumped all the versions to keep them consistent.
* Explicitly say that we support NU5 testnet 2
* Expand PR #3799 into changelog entries
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* update librustzcash; adapt to new API
* add ticket reference for removing zcash_proofs duplicated dependencies
* update to new zcash_script V5 API
* use zp_tx shorthand
* update to Zcash 4.7.0 dependencies
* update protocol versions
* feat(rpc): Implement `getblockchaininfo` RPC method (#3891)
* Implement `getblockchaininfo` RPC method
* add a test for `get_blockchain_info`
* fix tohex/fromhex
* move comment
* Update lightwalletd acceptance test for getblockchaininfo RPC (#3914)
* change(rpc): Return getblockchaininfo network upgrades in height order (#3915)
* Update lightwalletd acceptance test for getblockchaininfo RPC
* Update some doc comments for network upgrades
* List network upgrades in order in the getblockchaininfo RPC
Also:
- Use a constant for the "missing consensus branch ID" RPC value
- Simplify fetching consensus branch IDs
- Make RPC type derives consistent
- Update RPC type documentation
* Make RPC type derives consistent
* Fix a confusing test comment
* get hashand height at the same time
* fix estimated_height
* fix lint
* add extra check
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* split test
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix(rpc): ignore an expected error in the RPC acceptance tests (#3961)
* Add ignored regexes to test command failure regex methods
* Ignore empty chain error in getblockchaininfo
We expect this error when zebrad starts up with an empty state.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Make sync error logs more user-friendly (#3944)
- use info level, there is nothing the user needs to do,
particularly for a single error
- explain that the errors are temporary
- hide backtraces, because they look like crashes
* Update test.patch.yml with lightwalletd job (#3970)
* Update test.patch.yml with lightwalletd job
* Remove a workflow condition that will always be false
In general, patch workflows need the
opposite conditions to the original workflow.
But in this case, we know the result of the
condition will always be true, so we can just delete it.
Co-authored-by: teor <teor@riseup.net>
* fix(doc): Fix bugs in the lightwalletd database design (#3964)
* Re-order column families in design in dependency order
* Minor RFC design tweaks and fixes
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Repoint zebra image links to our new zfnd.org site for now (#3949)
* Repoint zebra image links to our new zfnd.org site for now
* Remove images/
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Fix typos (#3956)
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* bump database version to trigger testnet rollback
* reduce minimum protocol version for now (will be changed later)
* update dependencies
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* update versions to match zcash 4.7.0
* deny.toml: update 'darling'
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
Co-authored-by: Dimitris Apostolou <dimitris.apostolou@icloud.com>
* Add test-only serialization, and make existing serialization test-only
* Make AddressLocations clearer in the API
* Add UnspentOutputAddressLocation
* Add the AddressLocation to the UTXO database value
* Update the snapshot test code for UnspentOutputAddressLocation
* Update the raw data snapshots
* Update the high-level data snapshots
* Increment the database version
* Make serialization clearer
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Fix code formatting
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add an empty utxo_by_transparent_addr_loc column family
* Update snapshot data for the new column family
* Add an AddressUnspentOutputs type
* Add round-trip tests for AddressUnspentOutputs
* Move address balances into their own method
* Simplify updating address balances
* Fix utxo_by_out_loc column family name
* Implement reads and writes of address UTXOs
* Update raw data snapshots
* Update the snapshot tests for high-level address UTXOs
* Assert rather than taking empty address snapshots for genesis
* Update high-level address UTXO snapshot data, and delete empty snapshots
* Increment the database version
* Use typed values for all ReadDisk methods
* Implement test-only serialization for transparent::Address
* Implement FromDisk for ()
* Store AddressUnspentOutput as the column family key
* Update round-trip serialization tests for AddressUnspentOutput
* Update snapshot test code, and add a UTXO data snapshot
* Update existing snapshot data
* Add new UTXO snapshot data
* Update column family name
```sh
fastmod utxo_by_transparent_addr_loc utxo_loc_by_transparent_addr_loc zebra*
```
* cargo fmt --all
* cargo insta test --review --delete-unreferenced-snapshots
* Explain why it is ok to use invalid database iterator indexes
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Add explanations of UTXO database updates
* Simplify an assertion
* Remove UnspentOutputAddressLocation and just store transparent::Output
* Update snapshot test data
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Update changelog for v1.0.0-beta.7
* Increment all crate versions
* Remove redundant release test that is now covered by CI
* Remove completed NU5 README check task from the release template
* Add Merge Freeze tool to the release checklist
* Simplify release checklist by removing unused steps
* Make proptest-impl features consistently depend on each other
* Use a non-test method for consensus checks
* Make proptest dependencies the same between crates
* Implement `getblockchaininfo` RPC method
* add a test for `get_blockchain_info`
* fix tohex/fromhex
* move comment
* Update lightwalletd acceptance test for getblockchaininfo RPC (#3914)
* change(rpc): Return getblockchaininfo network upgrades in height order (#3915)
* Update lightwalletd acceptance test for getblockchaininfo RPC
* Update some doc comments for network upgrades
* List network upgrades in order in the getblockchaininfo RPC
Also:
- Use a constant for the "missing consensus branch ID" RPC value
- Simplify fetching consensus branch IDs
- Make RPC type derives consistent
- Update RPC type documentation
* Make RPC type derives consistent
* Fix a confusing test comment
* get hashand height at the same time
* fix estimated_height
* fix lint
* add extra check
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* split test
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix(rpc): ignore an expected error in the RPC acceptance tests (#3961)
* Add ignored regexes to test command failure regex methods
* Ignore empty chain error in getblockchaininfo
We expect this error when zebrad starts up with an empty state.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feature(rpc): start adding a `getblock` method
* fix(rpc): replace oneshot
* fix(rpc): replace a panic with error
* fix(rpc): fix test
* feature(rpc): add hex to response
* refactor(rpc): use generic instead of alias
* docs(rpc): improve docs for getblock method
* test(rpc): add a test for getblock method
* deps(rpc): remove non needed tower features
Co-authored-by: teor <teor@riseup.net>
* docs(rpc): add a note to getblock doc
* refactor(rpc): replace alias
* fix(rpc): use `zcash_serialize_to_vec()` instead of logging format
* tests(rpc): add network argument to `populated_state()`
* refactor(rpc): use an error for state service readiness
* fix(rpc): add parameter
* fix(rpc): clippy
* nit(rpc): remove new line from imports
* fix(rpc): remove commented code
* fix(rpc): simplify error
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Use a `SerializedBlock` type to help serializing blocks (#3725)
* Create a `SerializedBlock` helper type
Create a type that can be used as a byte slice, but is guaranteed to
represent a valid block.
* Use `into_iter` instead of `iter`
There's no need to borrow the elements, they can be moved out directly.
This will be necessary because `&Arc<T>` doesn't implement `Borrow<T>`,
so a `SerializedBlock` can't be built directly from an `&Arc<Block>`.
* Use `SerializedBlock` in `GetBlock`
Make the type stricter to avoid storing possibly invalid values. The
bytes are still serialized as a hexadecimal string, through the usage of
`hex`.
The `serde::Deserialize` can't be derived because `hex` requires the
type to also implement `FromHex`.
* feature(rpc): add suggestions from code review
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* tests(rpc): make sure mempool has no requests in get_block test
* fix(rpc): change height argument type in getblock method
* fix(rpc): rustfmt
* fix(rpc): replace panic
* fix(rpc): change getblock response
* fix(rpc): fix lightwalletd test
* tests(rpc): add a getblock error test
* fix(rpc): try another regex
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Stub `sendrawtransaction` RPC method
Register the RPC method, and stub an implementation that currently just
panics. The method has a single `String` parameter with the hexadecimal
string of the raw transaction's bytes and returns a
`SentTransactionHash` wrapper type that's just a hexadecimal `String` of
the sent transaction's hash.
* Add mempool service instance to `RpcImpl`
Use a type parameter to represent the mempool service using the
interface defined by `zebra-node-services`.
* Update test vector to use a mock mempool service
Update the test to be compatible with the changes to `RpcImpl`. The mock
mempool service is expected to not be used during the test.
* Use a `tower::Buffer` for the mempool service
Make it simpler to send requests to the service in a concurrent manner.
* Return a `Future` from `send_raw_transaction`
Make the call asynchronous.
* Implement `sendrawtransaction` RPC
Deserialize the transaction and send it to be queued for verification
and subsequent inclusion in the mempool.
* Test if mempool receives sent raw transaction
Use a mock service as the mempool service and check that it receives a
sent raw transaction.
* Test using non-hexadecimal string parameter
The method should return an error.
* Test with bytes that fail deserialization
Check that the method returns an invalid parameters error if the input
can't be deserialized as a `Transaction`.
* Test if mempool errors are forwarded to caller
Mempool service errors should be sent back to the remote caller as
server errors.
* Test transactions rejected by the mempool service
Transactions that are rejected by the mempool service should result in
a server error being sent to the caller.
* Improve error message
Add the word "structurally" to make it clear that the issue is in the
transaction's deserialization.
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* Add note regarding missing `allowhighfees` param.
The parameter isn't supported yet because `lightwalletd` doesn't use it.
* Update the documentation to be consistent
Follow the convention adopted by the `get_info` RPC method.
* Implement `ToHex` and `FromHex` for `Hash`
Make it easier to generate hexadecimal strings from `transaction::Hash`
instances.
* Use `ToHex` in `Debug` and `Display`
Reduce repeated code.
* Refactor to add `bytes_in_display_order` method
Use it to remove repeated code and improve clarity a bit.
* Use `hex::serialize` to serialize transaction hash
Make the type stricter in its contents, while still serializing the
transaction has as a hexadecimal string.
* Simplify serialization attribute
Deserialization should also use `hex::deserialize`, so using the shorter
attribute makes things easier to read and more future proof.
* Update zebra-chain/src/transaction/hash.rs
* Remove unnecessary lifetime
The anonymous lifetime is automatically inferred by the compiler.
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* Upgrade some dependencies
* Upgrade some dependencies
* Upgrade dependencies for zebrad
* Upgrade tracing dependencies
* Revert `tor` & `arti`
* Upgrade `criterion` & `pin-project` in `deny.toml`
* Remove some dependencies from `skip-tree` in `deny.toml`
* Revert some the versions of dependencies because of duplicates
* Revert proptest regressions
* Upgrade dependencies, then ignore some more duplicates (#3716)
* feat(actions)!: add full sync test (#3582)
* add(tests): full sync test
* fix(test): add build
* fix(deploy): escape double dashes '--' correctly
* fix(test): remove unexpected --no-capture arg
error: Found argument '--nocapture' which wasn't expected, or isn't valid in this context
* refactor(docker): use default executable as entrypoint
* refactor(startup): add a custom entrypoint
* fix(test): add missing TEST_FULL_SYNC variable
* test(timeout): use the biggest machine
* fix
* fix(deploy): use latest successful image
* typo
* refactor(docker): generate config file at startup
* revert(build): changes were made to docker
* fix(docker): send variables correctly to the entrypoint
* test different conf file approach
* fix(env): add RUN_TEST env variable
* ref: use previous approach
* fix(color): use environment variable
* fix(resources): use our normal machine size
* fix(ci): double CPU and RAM for full sync test
* fix(test): check for zebrad test output in the correct order
The mempool is only activated once, so we must check for that log first.
After mempool activation, the stop regex is logged at least once.
(It might be logged before as well, but we can't rely on that.)
When checking that the mempool didn't activate,
wait for the `zebrad` command to exit,
then check the entire log.
* fix(ci): run full sync test with full compiler optimisations
* fix(tests): reintroduce tests and run full sync on approval
* fix(tests): reduce the changelog
Co-authored-by: teor <teor@riseup.net>
* fix(ci): update CI job path triggers (#3692)
* ci(test): re-run tests when snapshot data changes
* fix(ci): rebuild state when disk format changes
* fix(ci): rebuild rust docs when code or dependencies change
* doc(ci): explain why we run jobs when files change
Co-authored-by: Gustavo Valverde <gustavo@iterativo.do>
* fix(build): use the right multistage target (#3700)
* fix(review): only assign one reviewer to general Rust reviews (#3708)
If we assign two teams, GitHub assigns two reviewers.
* fix(ci): change the color-eyre ignore to a tracing-subscriber ignore
* fix(ci): ignore duplicate darling dependencies
* doc(ci): remove an alternative resolution doc
Co-authored-by: Gustavo Valverde <gustavo@iterativo.do>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Gustavo Valverde <gustavo@iterativo.do>
* Stub `sendrawtransaction` RPC method
Register the RPC method, and stub an implementation that currently just
panics. The method has a single `String` parameter with the hexadecimal
string of the raw transaction's bytes and returns a
`SentTransactionHash` wrapper type that's just a hexadecimal `String` of
the sent transaction's hash.
* Add mempool service instance to `RpcImpl`
Use a type parameter to represent the mempool service using the
interface defined by `zebra-node-services`.
* Update test vector to use a mock mempool service
Update the test to be compatible with the changes to `RpcImpl`. The mock
mempool service is expected to not be used during the test.
* Use a `tower::Buffer` for the mempool service
Make it simpler to send requests to the service in a concurrent manner.
* Return a `Future` from `send_raw_transaction`
Make the call asynchronous.
* Implement `sendrawtransaction` RPC
Deserialize the transaction and send it to be queued for verification
and subsequent inclusion in the mempool.
* Test if mempool receives sent raw transaction
Use a mock service as the mempool service and check that it receives a
sent raw transaction.
* Test using non-hexadecimal string parameter
The method should return an error.
* Test with bytes that fail deserialization
Check that the method returns an invalid parameters error if the input
can't be deserialized as a `Transaction`.
* Test if mempool errors are forwarded to caller
Mempool service errors should be sent back to the remote caller as
server errors.
* Test transactions rejected by the mempool service
Transactions that are rejected by the mempool service should result in
a server error being sent to the caller.
* Improve error message
Add the word "structurally" to make it clear that the issue is in the
transaction's deserialization.
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* Add note regarding missing `allowhighfees` param.
The parameter isn't supported yet because `lightwalletd` doesn't use it.
* Update the documentation to be consistent
Follow the convention adopted by the `get_info` RPC method.
* Remove mempool service usage line
It contained incomplete information that's not really necessary.
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Fix formatting
`rustfmt` was not executed on the file for the previous commit because I
had edited it on GitHub.
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* tests(rpc): add an rpc endpoint test
* tests(rpc): add an rpc port conflict test
* tests(rpc): refactor some imports
* tests(rpc): fix failures, make test more complete
* tests(rpc): parse json response for better coverage
* tests(rpc): change request
* tests(rpc): wait until port is open in rpc_endpoint test
* tests(rpc): add a delay between launching 2 nodes
* tests(rpc): try 5 seconds
* refactor(rpc): open rpc server faster
* tests(rpc): extend `LAUNCH_DELAY` to 15 seconds
* fix(rpc): disable rpc_conflict test for windows
* fix(ci): skip the RPC tests if the network is disabled
* rustfmt
* fix(zebrad/test): test function return type
* tests(rpc): print server output in assert
* fix(rpc): fix acceptance test looking for string in `build` field
* fix(rpc): reduce the number of acceptable characters in version output
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* refactor(state): split database access into modules by Zebra types
Also split the genesis block check from the genesis note commitment trees.
* test(db): snapshot column family names
* fix(db): assert that the default column family is empty on open and close
* feat(test): apply `cargo insta` settings to all tests
* doc(db/test): improve test docs
* test(db): snapshot column family data for the empty state
* refactor(db/test): split out the raw database snapshot
* test(db): snapshot raw database for blocks 0-2
* test(db): initial serialized snapshot data for raw database
* test(db): tweak snapshot file names
* test(db): rename snapshots for consistency
* test(db): store empty column families in a single snapshot
* test(db): simplify snapshot files by combining empty snapshots
* doc(db/test): put comment in a better place
* refactor(db): fastmod assert_default_is_empty assert_default_cf_is_empty
* doc(test): explain when insta settings are needed
* fix(state/test): use the network to initialize the state
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* feature(rpc): add getinfo subversion field and getinfo docs
* feature(rpc): add getinfo build field
* refactor(rpc): replace the lazy_static
* docs(rpc): fic typo, add link to zcashd ticket
* tests(rpc): add getinfo unit test
* docs(rpc): complete comment