* Revert "Remove commented-out code"
This reverts commit 9e69777925f103ee11e5940bba95b896c828839b.
* Implement deserialization for `addrv2` messages
* Limit addr and addrv2 messages to MAX_ADDRS_IN_MESSAGE
* Clarify address version comments
* Minor cleanups and fixes
* Add preallocation tests for AddrV2
* Add serialization tests for AddrV2
* Use prop_assert in AddrV2 proptests
* Use a generic utility method for deserializing IP addresses in `addrv2`
* Document the purpose of a conversion to MetaAddr
* Fix a comment typo, and clarify that comment
* Clarify the unsupported AddrV2 network ID error and enum variant names
```sh
fastmod AddrV2UnimplementedError UnsupportedAddrV2NetworkIdError zebra-network
fastmod Unimplemented Unsupported zebra-network
```
* Fix and clarify unsupported AddrV2 comments
* Replace `panic!` with `unreachable!`
* Clarify a comment about skipping a length check in a test
* Remove a redundant test
* Basic addr (v1) and addrv2 deserialization tests
* Test deserialized IPv4 and IPv6 values in addr messages
* Remove redundant io::Cursor
* Add comments with expected values of address test vectors
* Update `tower` to version `0.4.9`
Update to latest version to add support for Tokio version 1.
* Replace usage of `ServiceExt::ready_and`
It was deprecated in favor of `ServiceExt::ready`.
* Update Tokio dependency to version `1.13.0`
This will break the build because the code isn't ready for the update,
but future commits will fix the issues.
* Replace import of `tokio::stream::StreamExt`
Use `futures::stream::StreamExt` instead, because newer versions of
Tokio don't have the `stream` feature.
* Use `IntervalStream` in `zebra-network`
In newer versions of Tokio `Interval` doesn't implement `Stream`, so the
wrapper types from `tokio-stream` have to be used instead.
* Use `IntervalStream` in `inventory_registry`
In newer versions of Tokio the `Interval` type doesn't implement
`Stream`, so `tokio_stream::wrappers::IntervalStream` has to be used
instead.
* Use `BroadcastStream` in `inventory_registry`
In newer versions of Tokio `broadcast::Receiver` doesn't implement
`Stream`, so `tokio_stream::wrappers::BroadcastStream` instead. This
also requires changing the error type that is used.
* Handle `Semaphore::acquire` error in `tower-batch`
Newer versions of Tokio can return an error if the semaphore is closed.
This shouldn't happen in `tower-batch` because the semaphore is never
closed.
* Handle `Semaphore::acquire` error in `zebrad` test
On newer versions of Tokio `Semaphore::acquire` can return an error if
the semaphore is closed. This shouldn't happen in the test because the
semaphore is never closed.
* Update some `zebra-network` dependencies
Use versions compatible with Tokio version 1.
* Upgrade Hyper to version 0.14
Use a version that supports Tokio version 1.
* Update `metrics` dependency to version 0.17
And also update the `metrics-exporter-prometheus` to version 0.6.1.
These updates are to make sure Tokio 1 is supported.
* Use `f64` as the histogram data type
`u64` isn't supported as the histogram data type in newer versions of
`metrics`.
* Update the initialization of the metrics component
Make it compatible with the new version of `metrics`.
* Simplify build version counter
Remove all constants and use the new `metrics::incement_counter!` macro.
* Change metrics output line to match on
The snapshot string isn't included in the newer version of
`metrics-exporter-prometheus`.
* Update `sentry` to version 0.23.0
Use a version compatible with Tokio version 1.
* Remove usage of `TracingIntegration`
This seems to not be available from `sentry-tracing` anymore, so it
needs to be replaced.
* Add sentry layer to tracing initialization
This seems like the replacement for `TracingIntegration`.
* Remove unnecessary conversion
Suggested by a Clippy lint.
* Update Cargo lock file
Apply all of the updates to dependencies.
* Ban duplicate tokio dependencies
Also ban git sources for tokio dependencies.
* Stop allowing sentry-tracing git repository in `deny.toml`
* Allow remaining duplicates after the tokio upgrade
* Use C: drive for CI build output on Windows
GitHub Actions uses a Windows image with two disk drives, and the
default D: drive is smaller than the C: drive. Zebra currently uses a
lot of space to build, so it has to use the C: drive to avoid CI build
failures because of insufficient space.
Co-authored-by: teor <teor@riseup.net>
* Increment the crates that have new commits since the last version
* Increment the crates that depend on crates that have changed
* Increment the version of `zebra-script`
* Use the `zebrad` version in the `zebra-network` user agent string
* Use the `v1.0.0-alpha.19` git tag in `README.md`
* Copy the draft changelog into `CHANGELOG.md`
* Delete bumps
* Update CHANGELOG.md
Co-authored-by: teor <teor@riseup.net>
* Add newly merged PRs
Co-authored-by: teor <teor@riseup.net>
* Get the transaction fee from utxos
* Return the transaction fee from the verifier
* Avoid calculating the fee for coinbase transactions
Coinbase transactions don't have fees. In case of a coinbase transaction, the
verifier returns a zero fee.
* Update the result obtained by `Downloads`
* Update versions for zebra v1.0.0-alpha.18 release
* WIP: Initial PR list
* Remove uninteresting version bumps from CHANGELOG
* Categorise and group PRs in CHANGELOG, removing uninteresting PRs
* Further refine and categorise changelog entries
* Fix tag url
* Final changes to CHANGELOG
* Add a changelog description
* Spacing
* Clarify and fix changelog PR descriptions
* Add PRs that are about to be merged
* More slight clarifications
* Spacing
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Check return value of zcash_script_new_precomputed_tx
* Set the NU5 testnet activation height to 1_590_000
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Update Nu5 constants to new values
* Update ZIP-244 test vectors for new branch ID
* Squashed commit of the following:
commit bdb120a249
Author: Deirdre Connolly <durumcrustulum@gmail.com>
Date: Tue Oct 5 11:54:01 2021 -0400
Use pallas::Base::from_str_vartime() in sinsemilla tests
commit e99fa49258
Author: Deirdre Connolly <durumcrustulum@gmail.com>
Date: Tue Oct 5 11:45:24 2021 -0400
Compiles
commit a520018114
Author: Deirdre Connolly <durumcrustulum@gmail.com>
Date: Tue Oct 5 10:15:17 2021 -0400
Incomplete upgrade of deps
* Squashed commit of the following:
commit 8d1b76ec5626517817c3a4d9f3950acc90a359df
Author: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Date: Tue Oct 5 04:02:26 2021 +0000
Update `zcash_script` to support V5 transactions
Use a newer version of `zcash_script` that has been updated to support
V5 transactions.
commit 371233628ae61e0c25d6ba8f31d9dba42823becb
Author: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Date: Tue Oct 5 03:06:20 2021 +0000
Update Zcash dependencies
Update some Zcash crates:
- `halo2`
- `incrementalmerkletree' (patch version)
- `orchard` (patch version)
- `zcash_history` (patch version)
- `zcash_note_encryption` (patch version)
- `zcash_primitives` (patch version)
And also update the `group` dependency so that the code remains
compatible.
commit de5cf1ec40c3fc08670fc971cdf3e65e13d9f4c7
Author: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Date: Tue Oct 5 03:04:13 2021 +0000
Update error message assertion
Use the updated message for the expected error variant.
* Update `zcash_script` to support V5 transactions
Use a newer version of `zcash_script` that has been updated to support
V5 transactions.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: teor <teor@riseup.net>
* Remove `std::error::Error` constraint
The generic `Error` type parameter doesn't have to implement the
standard `Error` trait, so having that constraint only unnecessarily
limits the types that can be used as an error for the service.
* Implement automatic conversion into `Error` type
Make the usage a little more ergonomic by not having to write manual
error type conversions.
* Add a documentation test for an error response
Show an example that responds to a call to the service with an error.
Co-authored-by: teor <teor@riseup.net>
* Implement initial service mocking helpers
Adds a [`MockService`] type, which can be configured and built for usage
in unit tests or proptests. The mocked service can then be used to
intercept requests and respond indivdiually to them.
* Use `MockService in the `mempool::Crawler` test
Refactor it to remove the helper mock function, and use the new
`MockService` helper type.
* Use `MockService` in `CandidateSet` test vectors
Refactor to remove the manual mocking of the peer set service.
* Panic if a response is not sent by `MockService`
Change the current semantics to require all `MockService` usages to
respond to every intercepted request.
A `must_use` attribute was added to the `ResponseSender` so that the
compiler can warn when this doesn't happen.
* Allow generic error types in `MockService`
Replace the hard-coded `BoxError` as the `Service`'s error type with a
generic type parameter. This allows mocking services in locations that
require specific error types.
* Add a `ResponseSender::request` getter
Allow inspecting the request again before responding, and using
information from the request in the response.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Always use librustzcash for sighash and remove old sighash code
Also added ZIP-143 test vectors
* Remove librustzcash_sighash test that is no longer needed
* Update versions for zebra v1.0.0-alpha.12 release
* Update Cargo.lock
* Update release checklist with latest version changes to help keep track for future releases
* Remove reference to the fact that tower-fallback was not updated
* Add a `zebra_test::RUNTIME` shared runtime
Create a lazily instantiated Tokio runtime that can be shared by tests.
* Split tests that require a shared runtime
Split two tests that were previously in one because of the need to share
a single Tokio runtime. With the `zebra_test::RUNTIME`, they can now
share the runtime without having to be a single test.
* Disable IPv6 tests when $ZEBRA_SKIP_IPV6_TESTS is set
This allows users to disable IPv6 tests in environments where IPv6 is not
configured.
* Add network test env var constants
* Replace env strings with constants
fastmod '"ZEBRA_SKIP_NETWORK_TESTS"' zebra_test::net::ZEBRA_SKIP_NETWORK_TESTS
fastmod '"ZEBRA_SKIP_IPV6_TESTS"' zebra_test::net::ZEBRA_SKIP_IPV6_TESTS
* Add functions to skip network tests
* Replace test network env var checks with test function
fastmod --fixed-strings 'env::var_os(zebra_test::net::ZEBRA_SKIP_NETWORK_TESTS).is_some()' 'zebra_test::net::zebra_skip_network_tests()'
fastmod --fixed-strings 'env::var_os(zebra_test::net::ZEBRA_SKIP_IPV6_TESTS).is_some()' 'zebra_test::net::zebra_skip_ipv6_tests()'
* Remove redundant logging and use statements
* Gossip dynamically allocated listener ports to peers
Previously, Zebra would either gossip port `0`, which is invalid, or skip
gossiping its own dynamically allocated listener port.
* Improve "no configured peers" warning
And downgrade from error to warning, because inbound-only nodes are a
valid use case.
* Move random_known_port to zebra-test
* Add tests for dynamic local listener ports and the AddressBook
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
- Add a custom semver match for `zebrad` versions
- Prefer "line contains string" matches, so tests ignore minor changes
- Escape regex meta-characters when a literal string match is intended
- Rename test functions so they are more precise
- Rewrite match internals to remove duplicate code and enable custom matches
- Document match functions
* implement and test a rate limit in `request_genesis()`
* add `request_genesis_is_rate_limited` test to sync
* add ensure_timeouts constraint for GENESIS_TIMEOUT_RETRY
* Suppress expected warning logs in zebrad tests
Co-authored-by: teor <teor@riseup.net>
* Add sapling final root test vectors
Also tidy some formatting and imports
* Doc: final sapling roots can be duplicated
* Reverse the byte order of final sapling root test vectors
This makes the test vectors match the byte order in the block header,
rather than the zcashd RPC responses.
* Ignore pre-sapling block header commitments
Previously, Zebra expected this reserved field to be all zeroes,
but some mainnet and testnet blocks had other values.
* Test structural and semantic validation of the block commitment field
History roots are excluded from these tests, because they require
contextual validation.
* Standardise lints across Zebra crates, and add missing docs
The only remaining module with missing docs is `zebra_test::command`
* Todo -> TODO
* Clarify what a transcript ErrorChecker does
Also change `Error` -> `BoxError`
* TransError -> ExpectedTranscriptError
* Output Descriptions -> Output descriptions
Zebra's latest alpha checkpoints on Canopy activation, continues our work on NU5, and fixes a security issue.
Some notable changes include:
## Added
- Log address book metrics when PeerSet or CandidateSet don't have many peers (#1906)
- Document test coverage workflow (#1919)
- Add a final job to CI, so we can easily require all the CI jobs to pass (#1927)
## Changed
- Zebra has moved its mandatory checkpoint from Sapling to Canopy (#1898, #1926)
- This is a breaking change for users that depend on the exact height of the mandatory checkpoint.
## Fixed
- tower-batch: wake waiting workers on close to avoid hangs (#1908)
- Assert that pre-Canopy blocks use checkpointing (#1909)
- Fix CI disk space usage by disabling incremental compilation in coverage builds (#1923)
## Security
- Stop relying on unchecked length fields when preallocating vectors (#1925)
`node2.is_running()` can return `true` on Windows, even though `node2`
has logged a panic. This cleanup code only runs if `node2` fails to panic
and exit as expected. So it's ok for us to skip it.
See #1781 for details.
On Windows, if a process is killed after it is dead, it returns `true`
for `was_killed`. Instead, check if the process is running before killing
it.
Also make the section where processes are running as short as possible,
and include context for both processes in every error.
* add hint for port error
* add issue filter for port panic
* add lock file hint
* add metrics endpoint port conflict hint
* add hint for tracing endpoint port conflict
* add acceptance test for resource conflics
* Split out common conflict test code into a function
* Add state, metrics, and tracing conflict tests
* Add a full set of stderr acceptance test functions
This change makes the stdout and stderr acceptance test interfaces
identical.
* move Zcash listener opening
* add todo about hint for disk full
* add constant for lock file
* match path in state cache
* don't match windows cache path
* Use Display for state path logs
Avoids weird escaping on Windows when using Debug
* Add Windows conflict error messages
* Turn PORT_IN_USE_ERROR into a regex
And add another alternative Windows-specific port error
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Jane Lusby <jane@zfnd.org>
* Bump versions where appropriate
Tested with cargo install --locked --path etc
* Remove fixed panics from 'Known Issues'
* Change to alpha release series in the README
Co-authored-by: teor <teor@riseup.net>
The clippy unknown lints attribute was deprecated in
nightly in rust-lang/rust#80524. The old lint name now produces a
warning.
Since we're using `allow(unknown_lints)` to suppress warnings, we need to
add the canonical name, so we can continue to build without warnings on
nightly.
But we also need to keep the old name, so we can continue to build
without warnings on stable.
And therefore, we also need to disable the "removed lints" warning,
otherwise we'll get warnings about the old name on nightly.
We'll need to keep this transitional clippy config until rustc 1.51 is
stable.
Previously we set the crate versions to 3.x, so that the major version was
aligned with the NU version. But we want to be able to make API changes
independently of the NU schedule.
Dimitris Apostolou
teor
Conrado Gouvea
dependabot[bot]
Janito Vaqueiro Ferreira Filho
Marek
Pili Guerra
Alfredo Garcia
Deirdre Connolly
Henry de Valence