* Remove in-memory state service
* make the config compatible with toml again
* checkpoint commit to see how much I still have to revert
* back to the starting point...
* remove unused dependency
* reorganize error handling a bit
* need to make a new color-eyre release now
* reorder again because I have problems
* remove unnecessary helpers
* revert changes to config loading
* add back missing space
* Switch to released color-eyre version
* add back missing newline again...
* improve error message on unix when terminated by signal
* add context to last few asserts in acceptance tests
* instrument some of the helpers
* remove accidental extra space
* try to make this compile on windows
* reorg platform specific code
* hide on_disk module and fix broken link
* add CheckpointList::new_up_to(limit: NetworkUpgrade)
* if checkpoint_sync is false, limit checkpoints to Sapling
* update tests for CheckpointList and chain::init
This is the first in a sequence of changes that change the block:: items
to not include Block as a prefix in their name, in accordance with the
Rust API guidelines.
* add valid generated config test
* change to pathbuf
* use -c to make sure we are using the generated file
* add and use a ZebraTestDir type
* change approach to generate tempdir in top of each test
* pass tempdir to test_cmd and set current dir to it
* add and use a `generated_config_path` variable in tests
* checkpoint: reject older of duplicate verification requests.
If we get a duplicate block verification request, we should drop the older one
in favor of the newer one, because the older request is likely to have been
canceled. Previously, this code would accept up to four duplicate verification
requests, then fail all subsequent ones.
* sync: add a timeout layer to block requests.
Note that if this timeout is too short, we'll bring down the peer set in a
retry storm.
* sync: restart syncing on error
Restart the syncing process when an error occurs, rather than ignoring it.
Restarting means we discard all tips and start over with a new block locator,
so we can have another chance to "unstuck" ourselves.
* sync: additional debug info
* sync: handle lookahead limit correctly.
Instead of extracting all the completed task results, the previous code pulled
results out until there were fewer tasks than the lookahead limit, then
stopped. This meant that completed tasks could be left until the limit was
exceeded again. Instead, extract all completed results, and use the number of
pending tasks to decide whether to extend the tip or wait for blocks to finish.
* network: add debug instrumentation to retry policy
* sync: instrument the spawned task
* sync: streamline ObtainTips/ExtendTips logic & tracing
This change does three things:
1. It aligns the implementation of ObtainTips and ExtendTips so that they use
the same deduplication method. This means that when debugging we only have one
deduplication algorithm to focus on.
2. It streamlines the tracing output to not include information already
included in spans. Both obtain_tips and extend_tips have their own spans
attached to the events, so it's not necessary to add Scope: prefixes in
messages.
3. It changes the messages to be focused on reporting the actual
events rather than the interpretation of the events (e.g., "got genesis hash in
response" rather than "peer could not extend tip"). The motivation for this
change is that when debugging, the interpretation of events is already known to
be incorrect, in the sense that the mental model of the code (no bug) does not
match its behavior (has bug), so presenting minimally-interpreted events forces
interpretation relative to the actual code.
* sync: hack to work around zcashd behavior
* sync: localize debug statement in extend_tips
* sync: change algorithm to define tips as pairs of hashes.
This is different enough from the existing description that its comments no
longer apply, so I removed them. A further chunk of work is to change the sync
RFC to document this algorithm.
* sync: reduce block timeout
* state: add resource limits for sled
Closes#888
* sync: add a restart timeout constant
* sync: de-pub constants
* network: move gossiped peer selection logic into address book.
* network: return BoxService from init.
* zebrad: add note on why we truncate thegossiped peer list
Co-authored-by: Jane Lusby <jlusby42@gmail.com>
* Remove unused .rustfmt.toml
Many of these options are never actually loaded by our CI because of a channel
mismatch, where they're not applied on stable but only on nightly (see the logs
from a rustfmt job). This means that we can get different settings when
running `cargo fmt` on the nightly and stable channels, which was causing a CI
failure on this PR. Reverting back to the default rustfmt settings avoids this
problem and keeps us in line with upstream rustfmt. There's no loss to us
since we were using the defaults anyways.
Co-authored-by: Jane Lusby <jlusby42@gmail.com>
* fix: Handle known ObtainTips correctly
enumerate never returns a value beyond the end of the vector.
* fix: Ignore known tips in ExtendTips
Some peers send us known tips when we try to extend.
* fix: Ignore known hashes when downloading
Despite all our other checks, we still end up downloading some hashes
multiple times.
* fix: Increase the number of retries
The old sync code relied on duplicate block fetches to make progress,
but the last few commits have removed some of those duplicates.
Instead, just retry the fetches that fail.
* fix: Tweak comments
Co-authored-by: Jane Lusby <jlusby42@gmail.com>
* fix: Cleanup the state_contains interface in Sync
* Fix brackets
Oops
Co-authored-by: Jane Lusby <jlusby42@gmail.com>
* make sure no info is printed in non server tests
* check exact full output for validity instead of log msgs
* add end of output character to version regex
* use coercions, use equality operator
Co-authored-by: Jane Lusby <jlusby42@gmail.com>
Co-authored-by: Jane Lusby <jlusby42@gmail.com>
The old sync code relied on duplicate block fetches to make progress,
but the last few commits have removed some of those duplicates.
Instead, just retry the fetches that fail.
We have a counter for pending "download and verify" futures. But these
futures are spawned, so they can complete in any order. They can also
complete before we receive their results.
* Split tracing component code into modules.
* Repatriate Tracing and simplify config handling.
We upstreamed our Tracing component, expecting not to have to exert fine
control over the tracing settings. But this turned out not to be the case, and
now that we want to do other things (flamegraphs, journalctl, opentelemetry,
etc), we end up with really awkward code (as in the current flamegraph
handling).
This also makes use of the changes to `init()` to load the config early to pass
configuration data into the components, which avoids the need for the
refactoring in #775.
Finally, we restore support for the `-v` flag when the filter is unset. Closes#831.
* Disable tracing and metrics endpoints by default.
Closes#660.
* Switch back to upstream Abscissa.
* Integrate flamegraph support into the new Tracing component.
* Pass -v in acceptance tests to get info-level output.
* Clean up acceptance test code.
* Setup tracing-flame for use profiling zebrad
* start work on conditional flamegraph generation
* review time!
* update comments
* Update Cargo.toml
* disable default features for inferno
* reorganize
* missing one trait
* Apply suggestions from code review
* graceful shutdown!
* remove special case handling on ctrlc for cleanup
* rename signal fn to better represent its responsibility
* remove unused global hook for flushing flamegraph
* move tracing logic to the right file
* just copy linkerd's signal handling logic
* update book
* make zebrad app drop on shutdown normally
* Update zebrad/src/components/tokio.rs
Co-authored-by: teor <teor@riseup.net>
* Update zebrad/src/application.rs
Co-authored-by: teor <teor@riseup.net>
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* cleanup a little
* ooh yea there's an API for that
* setup env-filter for backup subscriber
* document env filter
* document return codes
* forgot to save
* Update book/src/applications/zebrad.md
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
* Load tracing filter only from config and simplify logic.
* Configure the state storage in the config, not an environment variable.
This also changes the config so that the path is always set rather than being
optional, because Zebra always needs a place to store its config.
* add zebrad acceptance tests
* add custom command test helpers that work with kill
* add and use info event for start and seed commands
* combine conflicting tests into one test case
Co-authored-by: Jane Lusby <jane@zfnd.org>
We get the injected TokioComponent dependency before the config is
loaded, so we can't use it to open the endpoints.
And we can't define after_config, because we use derive(Component).
So we work around these issues by opening the endpoints manually,
from the application's after_config.
* make zebra-checkpoints
* fix LOOKAHEAD_LIMIT scope
* add a default cli path
* change doc usage text
* add tracing
* move MAX_CHECKPOINT_HEIGHT_GAP to zebra-consensus
* do byte_reverse_hex in a map
This seems like a better design on principle but also appears to give a much
nicer sawtooth pattern of queued blocks in the checkpointer and a much smoother
pattern of block requests.
teor
Alfredo Garcia
Jane Lusby
Ramana Venkata
Henry de Valence
Deirdre Connolly
dependabot[bot]