* minor cleanup and rename
* Adds an empty NetworkParameters struct to Network::Testnet variant, updates production code.
* Updates tests
* Adds `NetworkKind` and uses it instead of `Network` in `HistoryTreeParts` and `transparent::Address`
* Adds a [network.testnet_parameters] section to the config, uses `NetworkKind` as zebra_network::Config::network field type, and converts 'Network' to `NetworkKind` before serializing
* Applies some suggestions from code review
* Applies suggestions from code review
* returns b58 prefix constants directly to remove From<NetworkKind> impl for zcash_primitives::consensus::Network
* Applies more suggestions from code review.
* moves conversions to zcash_primitives::consensus::Network to where they're used.
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* rename `network` variables and method names typed as NetworkKind to `network_kind`
* use only test block heights for the network associated with them
* Applies more suggestions from code review.
* Rename `NetworkParameters` to `Parameters` and move it a new `testnet` module
* adds activation heights field
* updates stored test config, adds a quicker test for checking that stored configs can be parsed, adds an intermediate representation of activation heights
* implement Parameters for Network
* Passes &Network directly instead of converting to zp_consensus::Network where there were conversions
* fixes a bad merge (removes a network conversion in zcash_note_encryption)
* Adds a test for the Parameters impl for zebra_chain::Network
* fixes doc links
* - Makes the `activation_heights` config field optional by adding a #[serde(default)]
- Panics if a non-zero activation height is provided for the `Genesis` network upgrade
- Always sets the `Genesis` and `BeforeOverwinter` network upgrade activation heights to 0 and 1, `BeforeOverwinter` could be overwritten by a later network upgrade
- Makes the `activation_heights` field on `Parameters` private, adds/uses an accessor method instead, and adds a builder struct and `build()` method
* small refactor of activation_heights() method
* check that activation heights are in the right order
* Updates `NetworkUpgrade::activation_height()` to return the height of the next NetworkUpgrade if it doesn't find the activation height of `&self`
* checks that the miner address is of TestnetKind on Regtest and update assertion message
* Adds a DNetworkUpgradeActivationHeights struct for better control over how activation heights can be configured
* moves all ordered network upgrades to a constant, adds a no_duplicates test, moves struct with activation heights outside deserialization impl and accepts it in `ParametersBuilder::activation_heights()` instead of a Vec
* panics if any network upgrades are configured to activate at Height(0) because it's reserved for Genesis
* Simplifies the `ParametersBuilder::activation_heights()` method and removes an unnecessary test.
* Adds Sapling HRPs as fields on testnet params. (#8398)
* Applies suggestions from code review.
* Update zebra-chain/src/parameters/network_upgrade.rs
Co-authored-by: Marek <mail@marek.onl>
---------
Co-authored-by: Marek <mail@marek.onl>
* fix beta imports and other warnings
* clippy lints beta
* move attributes to after docs
Co-authored-by: Marek <mail@marek.onl>
* move some code to test module
* implement display instead of direct tostring for LongPollId
Co-authored-by: Arya <aryasolhi@gmail.com>
* fix typo
---------
Co-authored-by: Marek <mail@marek.onl>
Co-authored-by: Arya <aryasolhi@gmail.com>
* minor cleanup and rename
* Adds an empty NetworkParameters struct to Network::Testnet variant, updates production code.
* Updates tests
* Adds `NetworkKind` and uses it instead of `Network` in `HistoryTreeParts` and `transparent::Address`
* Adds a [network.testnet_parameters] section to the config, uses `NetworkKind` as zebra_network::Config::network field type, and converts 'Network' to `NetworkKind` before serializing
* Applies some suggestions from code review
* Applies suggestions from code review
* returns b58 prefix constants directly to remove From<NetworkKind> impl for zcash_primitives::consensus::Network
* Applies more suggestions from code review.
* moves conversions to zcash_primitives::consensus::Network to where they're used.
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* rename `network` variables and method names typed as NetworkKind to `network_kind`
* use only test block heights for the network associated with them
* Applies more suggestions from code review.
* Rename `NetworkParameters` to `Parameters` and move it a new `testnet` module
---------
Co-authored-by: Marek <mail@marek.onl>
- Panics if a non-zero activation height is provided for the `Genesis` network upgrade
- Always sets the `Genesis` and `BeforeOverwinter` network upgrade activation heights to 0 and 1, `BeforeOverwinter` could be overwritten by a later network upgrade
- Makes the `activation_heights` field on `Parameters` private, adds/uses an accessor method instead, and adds a builder struct and `build()` method
* removed derive copy from network, address and ledgerstate
* changed is_max_block_time_enforced to accept ref
* changed NetworkUpgrade::Current to accept ref
* changed NetworkUpgrade::Next to accept ref
* changed NetworkUpgrade::IsActivationHeight to accept ref
* changed NetworkUpgrade::TargetSpacingForHeight to accept ref
* changed NetworkUpgrade::TargetSpacings to accept ref
* changed NetworkUpgrade::MinimumDifficultySpacing_forHeight to accept ref
* changed NetworkUpgrade::IsTestnetMinDifficultyBlock to accept ref
* changed NetworkUpgrade::AveragingWindowTimespanForHeight to accept ref
* changed NetworkUpgrade::ActivationHeight to accept ref
* changed sapling_activation_height to accept ref
* fixed lifetime for target_spacings
* fixed sapling_activation_height
* changed transaction_to_fake_v5 and fake_v5_transactions_for_network to accept ref to network
* changed Input::vec_strategy to accept ref to network
* changed functions in zebra-chain/src/primitives/zcash_history.rs to accept ref to network
* changed functions in zebra-chain/src/history_tree.rs to accept ref to network
* changed functions in zebra-chain/src/history_tree.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/address.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/viewing_key* to accept ref to network
* changed functions in zebra-chain/src/transparent/address.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/zcash_primitives.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/zcash_note_encryption.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/history_tree* to accept ref to network
* changed functions in zebra-chain/src/block* to accept ref to network
* fixed errors in zebra-chain::parameters::network
* fixed errors in zebra-chain::parameters::network
* fixed errors in zebra-chain
* changed NonEmptyHistoryTree and InnerHistoryTree to hold value instead of ref
* changed NonEmptyHistoryTree and InnerHistoryTree to hold value instead of ref
* fixed errors in zebra-chain/src/block/arbitrary.rs
* finished fixing errors in zebra-chain - all crate tests pass
* changed functions in zebra-state::service::finalized_state to accept &Network
* changed functions in zebra-state::service::non_finalized_state to accept &Network
* zebra-state tests run but fail with overflow error
* zebra-state tests all pass
* converted zebra-network -- all crate tests pass
* applied all requested changes from review
* converted zebra-consensus -- all crate tests pass
* converted zebra-scan -- all crate tests pass
* converted zebra-rpc -- all crate tests pass
* converted zebra-grpc -- all crate tests pass
* converted zebrad -- all crate tests pass
* applied all requested changes from review
* fixed all clippy errors
* fixed build error in zebrad/src/components/mempool/crawler.rs
* Create an empty storage/db module
* Use ephemeral storage in tests
* Populate storage inside new() method
* Move scanner setup into an init() method
* Pass the network to scanner init
* Create a database but don't actually use it
* Skip shutdown format checks when skipping format upgrades
* Allow the scanner to skip launching format upgrades in production
* Refactor skipping format upgrades so it is consistent
* Allow checking configs for equality
* Restore Network import
* Adds most_recent_by_ip field to address book
* adds test
* Apply suggestions from code review
* fixes lint
* Updates most_recent_by_ip in .take()
Updates should_update_most_recent_by_ip() and has_active_peer_with_ip to check last_attempt and last_failure times
Renames has_active_peer_with_ip
* Documents that Zebra will not initiate more than 1 outbound connections per IP
* Fixes is_ready_for_connection_attempt_with_ip
Adds test coverage for AttemptPending and Failed
Fixes new_outbound_peer_connections_are_rate_limited proptest
* Applies suggestions from code review.
* Applies suggestions from code review
* Always return true from `is_ready_for_connection_attempt_with_ip` if max_connections_per_ip != 0
* Update max_connections_per_ip config docs
* Warn about invalid config fields and use default values
* Ignores last_attempt and last_failure in is_ready_for_connection_attempt_with_ip
updates test
* Only update most_recent_by_ip if update.last_conn_state is responded.
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* fixes lint
* Update zebra-network/src/address_book.rs
Co-authored-by: teor <teor@riseup.net>
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Fix Rust syntax
* Fix whitespace
---------
Co-authored-by: teor <teor@riseup.net>
* Add a missing timeout to outbound TCP connections
* Move inbound handshakes into their own function, replacing the manual span
* Delete a useless manual span in zebra_network::config
* Add an extra timeout to the spawned inbound handshake task
* Rewrite some state cache docs to clarify
* Add a zebra_network::Config.cache_dir for peer address caches
* Add new config test files and fix config test failure message
* Create some zebra-chain and zebra-network convenience functions
* Add methods for reading and writing the peer address cache
* Add cached disk peers to the initial peers list
* Add metrics and logging for loading and storing the peer cache
* Replace log of useless redacted peer IP addresses
* Limit the peer cache minimum and maximum size, don't write empty caches
* Add a cacheable_peers() method to the address book
* Add a peer disk cache updater task to the peer set tasks
* Document that the peer cache is shared by multiple instances unless configured otherwise
* Disable peer cache read/write in disconnected tests
* Make initial peer cache updater sleep shorter for tests
* Add unit tests for reading and writing the peer cache
* Update the task list in the start command docs
* Modify the existing persistent acceptance test to check for peer caches
* Update the peer cache directory when writing test configs
* Add a CacheDir type so the default config can be enabled, but tests can disable it
* Update tests to use the CacheDir config type
* Rename some CacheDir internals
* Add config file test cases for each kind of CacheDir config
* Panic if the config contains invalid socket addresses, rather than continuing
* Add a network directory to state cache directory contents tests
* Add new network.cache_dir config to the config parsing tests
* ZIPs were updated to remove ambiguity, this was tracked in #1267.
* #2105 was fixed by #3039 and #2379 was closed by #3069
* #2230 was a duplicate of #2231 which was closed by #2511
* #3235 was obsoleted by #2156 which was fixed by #3505
* #1850 was fixed by #2944, #1851 was fixed by #2961 and #2902 was fixed by #2969
* We migrated to Rust 2021 edition in Jan 2022 with #3332
* #1631 was closed as not needed
* #338 was fixed by #3040 and #1162 was fixed by #3067
* #2079 was fixed by #2445
* #4794 was fixed by #6122
* #1678 stopped being an issue
* #3151 was fixed by #3934
* #3204 was closed as not needed
* #1213 was fixed by #4586
* #1774 was closed as not needed
* #4633 was closed as not needed
* Clarify behaviour of difficulty spacing
Co-authored-by: teor <teor@riseup.net>
* Update comment to reflect implemented behaviour
Co-authored-by: teor <teor@riseup.net>
* Update comment to reflect implemented behaviour when retrying block downloads
Co-authored-by: teor <teor@riseup.net>
* Update `TODO` to remove closed issue and clarify when we might want to fix
Co-authored-by: teor <teor@riseup.net>
* Update `TODO` to remove closed issue and clarify what we might want to change in future
Co-authored-by: teor <teor@riseup.net>
* Clarify benefits of how we do block verification
Co-authored-by: teor <teor@riseup.net>
* Fix rustfmt errors
---------
Co-authored-by: teor <teor@riseup.net>
* Add a PeerSocketAddr type which hides its IP address, but shows the port
* Manually replace SocketAddr with PeerSocketAddr where needed
```sh
fastmod SocketAddr PeerSocketAddr zebra-network
```
* Add missing imports
* Make converting into PeerSocketAddr easier
* Fix some unused imports
* Add a canonical_peer_addr() function
* Fix connection handling for PeerSocketAddr
* Fix serialization for PeerSocketAddr
* Fix tests for PeerSocketAddr
* Remove some unused imports
* Fix address book listener handling
* Remove redundant imports and conversions
* Update outdated IPv4-mapped IPv6 address code
* Make addresses canonical when deserializing
* Stop logging peer addresses in RPC code
* Update zebrad tests with new PeerSocketAddr type
* Update zebra-rpc tests with new PeerSocketAddr type
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Remove verbose continuous_blockchain test logs
* Downgrade verbose zebra-network logs to debug
* Downgrade some state logs to debug during tests
* Mark were we would add always-on log filters, if we needed to
* Reduce the number of mempool property tests, to reduce logging
* change `initial_mainnet_peers` and `initial_testnet_peers` type to `IndexSet`
* add tests for zebra config files
* add serde feature to indexmap
* remove async
* update config
* fix `stored_config_path()`
* skip tests if config is not found
* improve error
* use CARGO_MANIFEST_DIR
* remove `stored_config_is_newest` test
* move `stored_config_works` test to the end of `valid_generated_config_test`
* space
* use `humantime_serde` for config durations
* move debug config option to the bottom
* fix deserialization
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Fix the syntax of links in comments
* Fix a mistake in the docs
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Remove unnecessary angle brackets from a link
* Revert the changes for links that serve as references
* Revert "Revert the changes for links that serve as references"
This reverts commit 8b091aa9fa.
* Remove `<` `>` from links that serve as references
This reverts commit 046ef25620.
* Don't use `<` `>` in normal comments
* Don't use `<` `>` for normal comments
* Revert changes for comments starting with `//`
* Fix some warnings produced by `cargo doc`
* Fix some rustdoc warnings
* Fix some warnings
* Refactor some changes
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* fix(network): allow more inbound than outbound connections
* refactor(network): access constants using consistent paths
* fixup! fix(network): allow more inbound than outbound connections
* fixup! fixup! fix(network): allow more inbound than outbound connections
* refactor(network): convert to standard test module layout
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Add arti as a zebra-network dependency
* Add a method for isolated anonymised Tor connections to a specific hostname
* Add tests for isolated tor connections
* Use a shared tor client instance for all isolated connections
* Silence a spurious tor warning in tests
* Make tor support optional, activate it via a new "tor" feature
* Extra Cargo.lock changes
* fastmod AsyncReadWrite PeerTransport zebra*
* Remove unnecessary PeerTransport generics
* Refactor common test code into a function
* Don't drop the stream until the end of the test
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Tweak crawler timings so peers are more likely to be available
* Tweak min peer connection interval so we try all peers
* Let other tasks run between fanouts, so we're more likely to choose different peers
* Let other tasks run between retries, so we're more likely to choose different peers
* Let other tasks run after peer crawler DemandDrop
This makes it more likely that peers will become ready.
* Tweak a log message
* Only retry failed DNS once, then use the other DNS responses
* Limit broadcasts to half the peers
* Use a longer minimum interval for GetAddr requests
* Reduce the syncer and mempool crawler fanouts
* Stop resetting the mempool twice when it starts up
This spawns two crawlers, which send two fanouts,
so it can use up a lot of peers.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Implement addr v1 serialization using a separate AddrV1 type
* Remove commented-out code
* Split the address serialization code into modules
* Reorder v1 and in_version fields in serialization order
* Fix a missed search-and-replace
* Explain conversion to MetaAddr
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Limit the number of outbound connections in the crawler
* Make zebra-network channel bounds depend on config.peerset_initial_target_size
* Bias Zebra towards outbound connections
And turn connection limits into `Config` methods.
* Downgrade some connection logs to debug
* Remove verbose or outdated fields in tracing logs
* Clarify connection limits
Includes:
- `fastmod OUTBOUND_PEER_BIAS_FRACTION OUTBOUND_PEER_BIAS_DENOMINATOR zebra*`
- clarify connection limit documentation
* Clarify inventory channel capacity
* Add zebra_network::initialize tests with limited numbers of peers
* Avoid cooperative async task starvation in the peer crawler and listener
If we don't yield in these loops, they can run for a long time before
tokio forces them to yield.
* Test the crawler with small connection limits
And use the multi-threaded runtime to avoid long hangs.
* Stop using the multi-threaded executor in tests where it's not needed
* Avoid starvation for every connection
Adds yields after inbound successes and initial peer connections.
* Add a crawler peer connection success test
* Add outbound connection limit tests
* Improve outbound tests
* Update some comments
* Add a mempool debug_enable_at_height config
* Rename a field in the mempool crawler
* Propagate syncer channel errors through the crawler
We don't want to ignore these errors, because they might indicate a shutdown.
(Or a bug that we should fix.)
* Use debug_enable_at_height in the mempool crawler
* Log when the mempool is activated or deactivated
* Deny unknown fields and apply defaults for all configs
* Move Duration last, as required for TOML tables
* Add a basic mempool acceptance test
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Add tracing and metrics for seed peer DNS resolution
* Add a grafana dashboard for seed peers
Currently this just shows the initial peer count from each seed.
* Add tracing and metrics for peer network protocol versions
* Update peers dashboard with network protocol versions
* Show peer network protocol versions for each seeder in dashboard
* Add per-seed filter to dashboard
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* README: update known issues
* Add ticket numbers
* Add network ports to README
* Make heading a bit clearer
* Update zebra listener address docs
Explain how Zebra currently uses listener addresses,
after recent changes.
* Gossip dynamically allocated listener ports to peers
Previously, Zebra would either gossip port `0`, which is invalid, or skip
gossiping its own dynamically allocated listener port.
* Improve "no configured peers" warning
And downgrade from error to warning, because inbound-only nodes are a
valid use case.
* Move random_known_port to zebra-test
* Add tests for dynamic local listener ports and the AddressBook
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Always send our local listener with the latest time
Previously, whenever there was an inbound request for peers, we would
clone the address book and update it with the local listener.
This had two impacts:
- the listener could conflict with an existing entry,
rather than unconditionally replacing it, and
- the listener was briefly included in the address book metrics.
As a side-effect, this change also makes sanitization slightly faster,
because it avoids some useless peer filtering and sorting.
* Skip listeners that are not valid for outbound connections
* Filter sanitized addresses Zebra based on address state
This fix correctly prevents Zebra gossiping client addresses to peers,
but still keeps the client in the address book to avoid reconnections.
* Add a full set of DateTime32 and Duration32 calculation methods
* Refactor sanitize to use the new DateTime32/Duration32 methods
* Security: Use canonical SocketAddrs to avoid duplicate connections
If we allow multiple variants for each peer address, we can make multiple
connections to that peer.
Also make sure sanitized MetaAddrs are valid for outbound connections.
* Test that address books contain the local listener address
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Allow use listen address in config without port
* update comments
* remove not used alias
* use Network::default_port
* Move tests and use toml instead json
* change error message
* Make match more readable
Co-authored-by: teor <teor@riseup.net>