* Move the preallocate tests into their own files
And move the MetaAddr proptest into its own file.
Also do some minor formatting and cleanups.
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* Rename RootHash to Commitment based on ZIP-244
Interactive replace using:
```sh
fastmod RootHash Commitment
fastmod root_hash commitment
fastmod root_bytes commitment_bytes
git mv zebra-chain/src/block/root_hash.rs zebra-chain/src/block/commitment.rs
```
All replacements were accepted.
* rustfmt
* Comment and format cleanups after interactive replace
* Distinguish Sapling tree roots from other tree roots
* Add the NU5 BlockCommitmentsHash variant to block::Commitment
This change parses the hash, but does not perform validation.
* Validate reserved values in Block::commitment
- change Block::commitment to return a Result rather than an Option
- enforce the all-zeroes reserved value consensus rules
- change `PreSaplingReserved([u8; 32])` to `PreSaplingReserved`
- change `ChainHistoryActivationReserved([u8; 32])` to `ChainHistoryActivationReserved`
- update the function comments to describe when each variant is verified
* Fix comment whitespace
* Implement SafePreallocate. Resolves#1880
* Add proptests for SafePreallocate
* Apply suggestions from code review
Comments which did not include replacement code will be addressed in a follow-up commit.
Co-authored-by: teor <teor@riseup.net>
* Rename [Safe-> Trusted]Allocate. Add doc and tests
Add tests to show that the largest allowed vec under TrustedPreallocate
is small enough to fit in a Zcash block/message (depending on type).
Add doc comments to all TrustedPreallocate test cases.
Tighten bounds on max_trusted_alloc for some types.
Note - this commit does NOT include TrustedPreallocate
impls for JoinSplitData, String, and Script.
These impls will be added in a follow up commit
* Implement SafePreallocate. Resolves#1880
* Add proptests for SafePreallocate
* Apply suggestions from code review
Comments which did not include replacement code will be addressed in a follow-up commit.
Co-authored-by: teor <teor@riseup.net>
* Rename [Safe-> Trusted]Allocate. Add doc and tests
Add tests to show that the largest allowed vec under TrustedPreallocate
is small enough to fit in a Zcash block/message (depending on type).
Add doc comments to all TrustedPreallocate test cases.
Tighten bounds on max_trusted_alloc for some types.
Note - this commit does NOT include TrustedPreallocate
impls for JoinSplitData, String, and Script.
These impls will be added in a follow up commit
* Impl TrustedPreallocate for Joinsplit
* Impl ZcashDeserialize for Vec<u8>
* Arbitrary, TrustedPreallocate, Serialize, and tests for Spend<SharedAnchor>
Co-authored-by: teor <teor@riseup.net>
* start refactoring transaction v4 for transaction v5
- move ShieldedData to sapling
- add AnchorVariant
- rename shielded_data to sapling_shielded data in V4
- move value_balance into ShieldedData
- update prop tests for new structure
* add AnchorVariant to Spend
- make anchor types available from sapling crate
- update serialize
* change shielded_balances_match() arguments
* change variable name anchor to shared_anchor in ShieldedData
* fix empty value balance serialization
* use AnchorV in shielded spends
* Rename anchor to per_spend_anchor
* Use nullifiers function directly in non-finalized state
* Use self.value_balance instead of passing it as an argument
* Add missing fields to ShieldedData PartialEq
* Derive Copy for tag types
* Add doc comments for ShieldedData refactor
* Implement a per-spend anchor compatibility iterator
Co-authored-by: teor <teor@riseup.net>
* Ed25519 async batch verification for JoinSplit signatures
We've been verifying JoinSplitSigs one-by-one pre-ZIP-215. Now as we're post-ZIP-215,
we can take advantage of the batch math to validate this signatures.
I would have pumped all the joinsplits in our MAINNET_BLOCKS test vectors but these
signatures are over the sighash, which needs the NU code to compute, and once we're
doing all that set up, we're basically doing transaction validation, so.
Resolves#1944
* Repoint to latest ed25519-zebra commit with note to point at 3.0 when released
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Zebra's latest alpha checkpoints on Canopy activation, continues our work on NU5, and fixes a security issue.
Some notable changes include:
## Added
- Log address book metrics when PeerSet or CandidateSet don't have many peers (#1906)
- Document test coverage workflow (#1919)
- Add a final job to CI, so we can easily require all the CI jobs to pass (#1927)
## Changed
- Zebra has moved its mandatory checkpoint from Sapling to Canopy (#1898, #1926)
- This is a breaking change for users that depend on the exact height of the mandatory checkpoint.
## Fixed
- tower-batch: wake waiting workers on close to avoid hangs (#1908)
- Assert that pre-Canopy blocks use checkpointing (#1909)
- Fix CI disk space usage by disabling incremental compilation in coverage builds (#1923)
## Security
- Stop relying on unchecked length fields when preallocating vectors (#1925)
Zebra already uses `Read::take` to enforce message, body, and block
maximum sizes.
So using `Read::take` on untrusted sizes can result in short reads,
without a corresponding `UnexpectedEof` error. (The old code was
correct, but copying it elsewhere would have been risky.)
Zebra believes the untrusted `JoinSplit` list size field when
deserializing `JoinSplit`s, and preallocates a `Vec` based on that size.
This is trivial a memory exhaustion attack.
Instead, use the current auto-growing implementation, which is limited
by the size of the message data.
* add transaction V5 stub
* add v5_strategy
* deduplicate version group ids
* Update comment for V5 transactions
* Add V5 transactions to non_finalized_state
Currently these are all `unimplemented!(...)`
* Fix struct matches
* Apply trivial panic message changes
* add zcash_deserialize for V5
* make all tx versions explicit in sprout and sapling nullifier functions
* match exhaustively in sprout and sapling nullifier functions
* fix matches in zebra-consensus
* fix NU5 strategy
* We're still deciding if v5 transactions support Sprout
Co-authored-by: teor <teor@riseup.net>
* Add NU5 variant to NetworkUpgrade
* Add consensus branch ID for NU5
* Add network protocol versions for NU5
* Add NU5 to the protocol::version_consistent test
* Make unimplemented panic messages more specific
* Block target spacing doesn't change in NU5
* add comments for future updates for NU5
Co-authored-by: teor <teor@riseup.net>
* Bump versions where appropriate
Tested with cargo install --locked --path etc
* Remove fixed panics from 'Known Issues'
* Change to alpha release series in the README
Co-authored-by: teor <teor@riseup.net>
The clippy unknown lints attribute was deprecated in
nightly in rust-lang/rust#80524. The old lint name now produces a
warning.
Since we're using `allow(unknown_lints)` to suppress warnings, we need to
add the canonical name, so we can continue to build without warnings on
nightly.
But we also need to keep the old name, so we can continue to build
without warnings on stable.
And therefore, we also need to disable the "removed lints" warning,
otherwise we'll get warnings about the old name on nightly.
We'll need to keep this transitional clippy config until rustc 1.51 is
stable.
Previously we set the crate versions to 3.x, so that the major version was
aligned with the NU version. But we want to be able to make API changes
independently of the NU schedule.
We modeled a Bitcoin `headers` message as being a list of block headers.
However, the actual data structure is slightly different: it's a list of (block
header, transaction count) pairs. This caused zcashd to reject our headers
messages.
To fix this, introduce a new `CountedHeader` struct with a `block::Header` and
transaction count `usize`, then thread it through the inbound service and the
state.
I tested this locally by running Zebra with these changes and inspecting a
trace-level log of the span of a peer connection that requested a nontrivial
headers packet from us, and verified that it did not reject our message.
The `CoinbaseData` parses the block height separately from the rest of the
free-form coinbase data. However, it had two bugs:
1. It did not require that the height was canonically encoded;
2. Its canonical encoding was incorrect relative to the BIP34-inherited encoding.
This meant that we computed some transaction hashes incorrectly, because when
we re-serialized the coinbase transaction, we would canonically serialize the
coinbase transaction (using the incorrect definition of canonical, bug 2). And
we didn't notice that the wrong definition of canonical encoding was being used
because we accepted what we thought were non-canonically encoded heights.
The relevant rules are here: 877212414a/src/script/script.h (L307-L346)
This commit changes the encoding to reject non-canonically encoded heights, and
to match the correct encoding rules. We check that at least one
non-canonically encoded height is correctly rejected using a new test vector.
The database format increments because we saved a bunch of wrongly encoded blocks.
This discrepancy was originally noticed by @teor2345, who pointed out that a
previous version of the block 202 test vector (now preserved as "bad block
202") did not match the block from zcashd.
* implement inbound `FindBlocks`
* Handle inbound peer FindHeaders requests
* handle request before having any chain tip
* Split `find_chain_hashes` into smaller functions
Add a `max_len` argument to support `FindHeaders` requests.
Rewrite the hash collection code to use heights, so we can handle the
`stop` hash and "no intersection" cases correctly.
* Split state height functions into "any chain" and "best chain"
* Rename the best chain block method to `best_block`
* Move fmt utilities to zebra_chain::fmt
* Summarise Debug for some Message variants
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Jane Lusby <jlusby42@gmail.com>
The derived Debug impl just shows u8s as numbers, which isn't what we
want. There are basically two reasonable options here:
1. Hex-encoded bytes
2. Escaped ASCII
I picked (2) because a lot of coinbase data has ascii text in it.
`zcashd` converts the PoWLimit into a compact representation before
using it to perform difficulty filter checks.
The Zcash specification converts to compact for the default difficulty
filter, but not for testnet minimum difficulty blocks. (ZIP 205 and
ZIP 208 don't specify this conversion either.) See #1277.
* Implement Expanded to Compact Difficulty
* Implement Arbitrary for CompactDifficulty
Remove the derive, and generate values from random block
hashes.
* Implement Arbitrary for ExpandedDifficulty and Work
* Use Arbitrary for CompactDifficulty in Arbitrary for Block
* Test difficulty on all block test vectors
And cleanup some duplicate test code
* Round-trip tests for compact test cases
* Round-trip tests for compact difficulty in block test vectors
* Make Add for Work return PartialCumulativeWork
Remove AddAssign for Work
Rewrite a proptest using Sub for PartialCumulativeWork
Use Arbitrary for Work
* Add roundtrip work sum tests
* Add roundtrip comparison difficulty tests
* Add failing proptest cases due to test bugs
* Use Some(_) rather than _.into()
* Reduce visibility of difficulty type inner values
* Split work and other difficulty proptests
This change makes sure that rejected work values don't disable property
tests on other types.
teor
Preston Evans
Deirdre Connolly
Alfredo Garcia
dependabot[bot]
Jane Lusby
Henry de Valence
Jane Lusby