* fix(network): split synthetic NotFoundRegistry from message NotFoundResponse
* docs(network): Improve `notfound` message documentation
* refactor(network): Rename MustUseOneshotSender to MustUseClientResponseSender
```
fastmod MustUseOneshotSender MustUseClientResponseSender zebra*
```
* docs(network): fix a comment typo
* refactor(network): remove generics from MustUseClientResponseSender
* refactor(network): add an inventory collector to Client, but don't use it yet
* feat(network): register missing peer responses as missing inventory
We register this missing inventory based on peer responses,
or connection errors or timeouts.
Inbound message inventory tracking requires peers to send `notfound` messages.
But `zcashd` skips `notfound` for blocks, so we can't rely on peer messages.
This missing inventory tracking works regardless of peer `notfound` messages.
* refactor(network): rename ResponseStatus to InventoryResponse
```sh
fastmod ResponseStatus InventoryResponse zebra*
```
* refactor(network): rename InventoryStatus::inner() to to_inner()
* fix(network): remove a redundant runtime.enter() in a test
* doc(network): the exact time used to filter outbound peers doesn't matter
* fix(network): handle block requests slightly more efficiently
* doc(network): fix a typo
* fmt(network): `cargo fmt` after rename ResponseStatus to InventoryResponse
* doc(test): clarify some test comments
* test(network): test synthetic notfound from connection errors and peer inventory routing
* test(network): improve inbound test diagnostics
* feat(network): add a proptest-impl feature to zebra-network
* feat(network): add a test-only connect_isolated_with_inbound function
* test(network): allow a response on the isolated peer test connection
* test(network): fix failures in test synthetic notfound
* test(network): Simplify SharedPeerError test assertions
* test(network): test synthetic notfound from partially successful requests
* test(network): MissingInventoryCollector ignores local NotFoundRegistry errors
* fix(network): decrease the inventory rotation interval
This stops us waiting 3-4 sync resets (4 minutes) before we retry a missing block.
Now we wait 1-2 sync resets (2 minutes), which is still a reasonable rate limit.
This should speed up syncing near the tip, and on testnet.
* fmt(network): cargo fmt --all
* cleanup(network): remove unnecessary allow(dead_code)
* cleanup(network): stop importing the whole sync module into tests
* doc(network): clarify syncer inventory retry constraint
* doc(network): add a TODO for a fix to ensure API behaviour remains consistent
* doc(network): fix a function doc typo
* doc(network): clarify how we handle peers that don't send `notfound`
* docs(network): clarify a test comment
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* refactor(network): rename Advertised to Available
```sh
fastmod Advertised Available zebra*
fastmod advertised available zebra*
```
* refactor(network): allow different available and missing types inside an InventoryStatus
And rename it to ResponseStatus.
Split the methods between ResponseStatus and an InventoryStatus alias.
* refactor(network): add a block_hash convenience method to InventoryHash
* test(network): improve failure logs for connection tests
* fix(inbound): move address sanitization into the response future
* feat(network): send notfound when Zebra doesn't have a block or transaction
* doc(network): move module docs to the top of each module
This makes them more likely to get updated when the module changes.
* fix(network): stop sending unsupported missing inventory types to the registry
* test(network): inbound messages are forwarded to the registry
* test(inbound): test Peers requests to the inbound service, directly and via TCP
* test(network): notfound block responses are sent by the inbound service
* test(network): notfound tx responses are sent by the inbound service
* test(network): increase sync test mock service timeout
The code that these tests use hasn't actually changed much,
and they are only failing on some platforms (coverage, macOS).
So it seems like the extra concurrent inbound tests have pushed them
past their time limit.
(Perhaps due to TCP system calls, or extra serialization work.)
* doc(network): fix typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* test(network): remove unnecessary multi-threaded runtime from tests
This prevents `MockService<zebra_state>` timeouts
in the `sync_block_too_high_extend_tips` test,
at the cost of reducing coverage of different execution orders.
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Log chain progress while Zebra is syncing
This helps test if the chain tip estimate is accurate,
and helps diagnose problems during full sync tests.
* Update to the latest chain tip estimate API
* Remove redundant documentation
The documentation was exactly the same as the documentation from the
trait.
* Calculate a mock time block delta for tests
Simulate a block being added to the chain with a random block time based
on the previous block time and the target spacing time.
* Add a `time` field to `ChainTipBlock`
Store the block time so that it's ready for a future chain that allows
obtaining the chain tip's block time.
* Add `ChainTip::best_tip_block_time` method
Allow obtaining the bes chain tip's block time.
* Add method to obtain both height and block time
Prevent any data races by returning both values so that they refer to
the same chain tip.
* Add `NetworkUpgrade::all_target_spacings` method
Returns all the target spacings defined for a network.
* Create a `NetworkChainTipEstimator` helper type
Isolate the code to calculate the height estimation in a new type, so
that it's easier to understand and doesn't decrease the readability of
the `chain_tip.rs` file.
* Add `ChainTip::estimate_network_chain_tip_height`
This is more of an extension method than a trait method. It uses the
`NetworkChainTipHeightEstimator` to actually perform the estimation, but
obtains the initial information from the current best chain tip.
* Fix typo in documentation
There was an extra closing bracket in the summary line.
* Refactor `MockChainTipSender` into a separate type
Prepare to allow mocking the block time of the best tip as well as the
block height.
* Allow sending mock best tip block times
Add a separate `watch` channel to send the best tip block times from a
`MockChainTipSender` to a `MockChainTip`.
The `best_tip_height_and_block_time` implementation will only return a
value if there's a height and a block time value for the best tip.
* Fix off-by-one height estimation error
Use Euclidean division to force the division result to round down
instead of rounding towards zero. This fixes an off-by-one error when
estimating a height that is lower than the current height, because the
fractionary result was being discarded, and it should have forced the
height to go one block back.
* Fix panics on local times very far in the past
Detect situations that might cause the block height estimate to
underflow, and return the genesis height instead.
* Fix another off-by-one height estimation error
The implementation of `chrono::Duration::num_seconds` adds one to the
number of seconds if it's negative. This breaks the division
calculation, so it has to be compensated for.
* Test network chain tip height estimation
Generate pairs of block heights and check that it's possible to estimate
the larger height from the smaller height and a displaced time
difference.
* Use string literal to format unreachable message
* Try removing the redundant format
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix(state): set state concurrency based on other services' concurrency
* fix(sync): increase the sync downloader lookahead limit
It seems like the recent tokio upgrade made this code even more efficient,
so on testnet we can have around 6000 blocks in flight.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat(log): log the state tip height as part of sync progress logs
* fix(log): downgrade some verbose state logs to debug
* feat(log): log successful gossiped block verification at info level
These logs help us diagnose slow progress near the tip.
There won't be very many of these logs,
because they only happen near the tip.
* fix(log): spawn top-level tasks within the global Zebra tracing span
* fix(log): spawn blocking top-level tasks within the global Zebra tracing span
Co-authored-by: teor <teor@riseup.net>
* Updating zebra-test to v1.0.0-beta.4
* Updating tower-fallback to v0.2.16
* Updating tower-batch to v0.2.20
* Updating zebra-chain to v1.0.0-beta.4
* Updating zebra-script to v1.0.0-beta.4
* Updating zebra-network to v1.0.0-beta.4
* Updating zebra-state to v1.0.0-beta.4
* Updating zebra-consensus to v1.0.0-beta.4
* Updating zebra-utils to v1.0.0-beta.4
* Updating zebrad to v1.0.0-beta.4
* Update Cargo.lock with updated crate versions
* Add section for 1.0.0-beta.4 in the CHANGELOG
* Update CHANGELOG.md
Co-authored-by: teor <teor@riseup.net>
* Update README.md
Co-authored-by: teor <teor@riseup.net>
* Update book/src/user/install.md
Co-authored-by: teor <teor@riseup.net>
* Update release description to mention Rust 2021
Update the changelog to mention that all crates now use Rust 2021
Edition.
* Elaborate on Section 3.6 documentation entry
Add the title of the section and mention that it's a section of the
Zcash protocol specification.
* Make changelog entries consistent
Use the same format for entries related to consensus rule documentation.
Co-authored-by: Marek <mail@marek.onl>
* Update README about validated consensus rules
Zebra now validates all documented consensus rules.
* Add changelog entry for newly merged PR
Describe the security fix in the changelog.
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Marek <mail@marek.onl>
* cancel background database tasks in `FinalizedState` destructor
* use `shutdown_timeout()`
* Log info-level messages while waiting for background tasks to shut down
* Cancel background tasks during debug_stop_at_height shutdown
This commit moves the database shutdown code into a common function.
* Create a constant for the tokio timeout
* Add a test script for Zebra shutdown errors
* Increase the shutdown timeout to 20 seconds for slower machines
* add title to building zebra
* use imported duration
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Move standard lints into .cargo/config.toml
* Ignore "wrong self convention" in a futures-based trait
This lint might only trigger on beta or nightly at the moment.
* Warn if future incompatibile code is added to Zebra
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Use `testdir()` instead of `TempDir::new()`
Reduce repeated code and make it easier to change from using `tempdir`
to use `tempfile` instead.
* Replace `tempdir` with `tempfile` in `zebrad`
Use `tempfile`'s `TempDir` instead.
* Use `tempdir()` instead of `TempDir::new()`
Reduce repeated code and make it easier to upgrade to `tempfile`.
* Use `tempfile` instead of `tempdir`
Replace obsoleted `tempdir` dependency with `tempfile`.
* Use `tempfile` instead of `tempdir`
Replace obsoleted `tempdir` dependency with `tempfile`.
* Update `Cargo.lock`
Update it now that `tempdir` has been replaced with `tempfile`.
* Remove `tempdir` from `deny.toml` exceptions
Ban duplicate versions of the `tempdir` dependency.
* Remove `inferno` from `deny.toml` exceptions
It apparently isn't needed anymore.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Refactor so that RetryLimit::Future is std::marker::Sync
* Make the syncer future std::marker::Send by spawning tips futures
* Download synced blocks in chain order, not HashSet order
* Improve MockService failure messages
* Add closure-based responses to the MockService API
* Move MockChainTip to zebra-chain
* Add a MockChainTipSender type alias
* Support MockChainTip in ChainSync and its downloader
* Add syncer tests for obtain tips, extend tips, and wrong block hashes
* Add block too high tests for obtain tips and extend tips
* Add syncer tests for duplicate FindBlocks response hashes
* Allow longer request delays for mocked services in syncer tests
* Add a copy-state command, which copies blocks between two state services
* Check blocks were written correctly
* Add extra logging to debug shutdown
* Add a block height limit argument
* Let the target state start from any height
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Move `MockedClientHandle` to `peer` module
It's more closely related to a `Client` than the `PeerSet`, and this
prepares it to be used by other tests.
* Rename `MockedClientHandle` to `ClientTestHarness`
Reduce confusion, and clarify that the client is not mocked.
Co-authored-by: teor <teor@riseup.net>
* Add clarification to `mock_peers` documentation
Explicitly say how the generated data is returned.
* Rename method to `wants_connection_heartbeats`
The `Client` service only represents one direction of a connection, so
`is_connected` is not the exact term.
Co-authored-by: teor <teor@riseup.net>
* Mock `Client` instead of `LoadTrackedClient`
Move where the conversion from mocked `Client` to mocked
`LoadTrackedClient` in order to make the test helper more easily used by
other tests.
* Use `ClientTestHarness` in `initialize` tests
Replace the boilerplate code to create a fake `Client` instance with
usages of the `ClientTestHarness` constructor.
* Allow receiving requests from `Client` instance
Create a helper type to wrap the result, to make it easier to assert on
specific events after trying to receive a request.
* Allow inspecting the current error in the slot
Share the `ErrorSlot` between the `Client` and the handle, so that the
handle can be used to inspect the contents of the `ErrorSlot`.
* Allow placing an error into the `ErrorSlot`
Assuming it is initially empty. If it already has an error, the code
will panic.
* Allow gracefully closing the request receiver
Close the endpoint with the appropriate call to the `close()` method.
* Allow dropping the request receiver endpoint
Forcefully closes the endpoint.
* Rename field to `client_request_receiver`
Also rename the related methods to include
`outbound_client_request_receiver` to make it more precise.
Co-authored-by: teor <teor@riseup.net>
* Allow dropping the heartbeat shutdown receiver
Allows the `Client` to detect that the channel has been closed.
* Rename fn. to `drop_heartbeat_shutdown_receiver`
Make it clear that it affects the heartbeat task.
Co-authored-by: teor <teor@riseup.net>
* Move `NowOrLater` into a new `now-or-later` crate
Make it easily accessible to other crates.
* Add `IsReady` extension trait for `Service`
Simplifies checking if a service is immediately ready to be called.
* Add extension method to check for readiness error
Checks if the `Service` isn't immediately ready because a call to
`ready` immediately returns an error.
* Rename method to `is_failed`
Avoid negated method names.
Co-authored-by: teor <teor@riseup.net>
* Add a `IsReady::is_pending` extension method
Checks if a `Service` is not ready to be called.
* Use `ClientTestHarness` in `Client` test vectors
Reduce repeated code and try to improve readability.
* Create a new `ClientTestHarnessBuilder` type
A builder to create test `Client` instances using mock data which can be
tracked and manipulated through a `ClientTestHarness`.
* Allow configuring the `Client`'s mocked version
Add a `with_version` builder method.
* Use `ClientTestHarnessBuilder` in `PeerVersions`
Use the builder to set the peer version, so that the `version` parameter
can be removed from the constructor later.
* Use a default mock version where possible
Reduce noise when setting up the harness for tests that don't really
care about the remote peer version.
* Remove `Version` parameter from the `build` method
The `with_version` builder method should be used instead.
* Fix some typos and outdated info in the release checklist
* Add extra client tests for zero and multiple readiness checks (#3273)
And document existing tests.
* Replace `NowOrLater` with `futures::poll!` (#3272)
* Replace NowOrLater with the futures::poll! macro in zebrad
* Replace NowOrLater with the futures::poll! macro in zebra-test
* Remove the now-or-later crate
* remove unused imports
* rustfmt
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Tweak crawler timings so peers are more likely to be available
* Tweak min peer connection interval so we try all peers
* Let other tasks run between fanouts, so we're more likely to choose different peers
* Let other tasks run between retries, so we're more likely to choose different peers
* Let other tasks run after peer crawler DemandDrop
This makes it more likely that peers will become ready.
* Document the chain verifier
* Drop gossiped blocks that are too far ahead of the tip
* Add extra gossiped block metrics
* Allow extra gossiped blocks, now we have a stricter limit
* Fix a comment
* Check the exact number of blocks in a downloaded block response
* Drop synced blocks that are too far ahead of the tip
* Add extra synced block metrics
* Test dropping gossiped blocks that are too far ahead of the tip
* Allow an extra checkpoint's worth of blocks in the verifier queues
* Actually let's try two extra checkpoints
* Scale extra height limit with lookahead limit
* Also drop blocks that are behind the finalized tip
* Downgrade a noisy log
* Use a debug log for already verified gossiped blocks
* Use debug logs for already verified synced blocks
* Use a named CancelHeartbeatTask unit struct for the channel type
* Prefer cancel handles in selects, if both are ready
* Fix message metrics to just show the command name
* Add metrics for internal requests and responses
* Add internal requests and responses to the messages dashboard
* Add a canceled metric, and peer addresses to request and response metrics
* Add a canceled messages graph
* Add connection state metrics for currently open connections
* Fix the connection state graph with new metrics
* Always send an error before dropping pending responses
* Move error detail logging into `fail_with`
* Delete an unused timer future
* Make error strings in metrics less verbose
* Downgrade some error logs to info
* Remove a redundant expect
* Avoid unnecessary allocations for connection state metrics
* Fix missed updates to mempool and block gossip metrics
* Stop useless crawler attempts when there are no peers and no crawl responses
* Disable GitHub bug report URLs when the disk is full
* Add help text for the `zebrad start` tracing filter option
* Use a single-thread shared Tokio runtime
This allows it to pause the time and more closely resembles the
environment that's set by default for asynchronous tests.
* Add a `zebra_test::init_async` helper function
Calls `zebra_test::init` but also constructs a single-thread Tokio
runtime and returns it. This makes it simpler to initialize asynchronous
tests that can't use the `#[tokio::test]` attribute.
* Replace usages of `Runtime::new` in tests
Use the new `zebra_test::init_async()` helper function instead.
* Replace `runtime::Builder::new_current_thread()`
Use the new `zebra_test::init_async()` helper function instead.
* Replace `runtime::Builder::new_multi_thread()`
Use the new `zebra_test::init_async()` helper function instead. The test
with the change doesn't necessarily have to use a multi-thread runtime.
* Refactor the address response limit
* Limit the number of peers in the address book
* Allow changing the address book limit in tests
* Add tests for the address book length limit
* rustfmt
* Stop checking the entire AddressBook for each connection attempt
* Stop redundant peer time checks within the address book
* Stop calling `Instant::now` 3 times for each address book update
* Only get the time once each time an address book method is called
* Update outdated comment
* Use an OrderedMap to efficiently store address book peers
* Add address book order tests
Zebra's latest beta continues implementing zero-knowledge proof and note commitment tree validation. In this release, we have finished implementing transaction header, transaction amount, and Zebra-specific NU5 validation. (NU5 mainnet validation is waiting on an `orchard` crate update, and some consensus parameter updates.)
We also fix a number of security issues that could pose a local denial of service risk, or make it easier for an attacker to make a node follow a false chain.
As of this release, Zebra will automatically download and cache the Sprout and Sapling Groth16 circuit parameters. The cache uses around 1 GB of disk space. These cached parameters are shared across all Zebra and `zcashd` instances run by the same user.
See CHANGELOG.md for the full list of changes in this release.
* Tweak a log message
* Only retry failed DNS once, then use the other DNS responses
* Limit broadcasts to half the peers
* Use a longer minimum interval for GetAddr requests
* Reduce the syncer and mempool crawler fanouts
* Stop resetting the mempool twice when it starts up
This spawns two crawlers, which send two fanouts,
so it can use up a lot of peers.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Download and load Sprout parameters using zcash_proofs
Also update some librustzcash dependencies, to avoid duplicate dependencies.
* Update upstream orchard to avoid a compilation error
* Skip librustzcash batch refactor for now, to avoid compilation errors
* Change the cache ID, so we actually cache Sprout
* Move existing file checks into zcash_proofs
* Add a 1 hour timeout to parameter file downloads
* Give other tasks priority, before spawning the download task
* Update to the latest version of our modified librustzcash fork
* Change the cache key for Sprout
* Add 40 minutes to CI timeouts for occasional sprout downloads
* Update to zcash_proofs with split downloads
* Check file sizes to help debug parameter load failures in zcash_proofs
* Start the second download once the first has finished in zcash_proofs
* Document the parameter download task
* Stop hashing existing files twice
* Start network before verifiers
This makes the Groth16 download task start as late as possible.
* Explain why the Groth16 download must happen first
* Speed up Zebra shutdown: skip waiting for the tokio runtime
* Replace Zcash parameters crates with pre-downloaded local parameter files
* Download Zcash parameters using the `zcashd` script in CI and Docker
* Add a zcash_proofs dependency to zebra-consensus
* Download Sapling parameters using zcash_proofs, rather than fetch-params.sh
* Add a new `zebrad download` subcommand
This command isn't required for nomrmal usage.
But it's useful when testing, or launching multiple Zebra instances.
* Use `zebrad download` in CI to pre-download parameters
* Log a helpful hint if downloading fails
* Allow some duplicate dependencies currently hidden by orchard
* Spawn a separate task to download Groth16 parameters
* Run the parameter download with code coverage
This avoids re-compining Zebra with and without coverage.
* Update Cargo.lock after rebase
* Try to pass `download` as an argument to `zebrad` in coverage CI
* Fix copy and paste comment typos
* Add path and download examples, like zcash_proofs
* Download params in CI just like zcash_proofs does
* Delete a redundant build step
* Implement graceful shutdown for zebrad start
* Send coverage summary to /dev/null when getting the params path
* Use the correct parameters path and download commands in CI
* Explain pre-downloads
* Avoid calling params_folder twice
* Rename parameter types and methods for consistency
```sh
fastmod SaplingParams SaplingParameters zebra*
fastmod Groth16Params Groth16Parameters zebra*
fastmod PARAMS GROTH16_PARAMETERS zebra*
fastmod params_folder directory zebra*
```
And a manual variable name tweak.
* rustfmt
* Remove a redundant coverage step
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Implement graceful shutdown for the peer set
* Use the minimum lookahead limit in acceptance tests
* Enable a doctest that compiles with newly public modules
* Revert "Remove commented-out code"
This reverts commit 9e69777925f103ee11e5940bba95b896c828839b.
* Implement deserialization for `addrv2` messages
* Limit addr and addrv2 messages to MAX_ADDRS_IN_MESSAGE
* Clarify address version comments
* Minor cleanups and fixes
* Add preallocation tests for AddrV2
* Add serialization tests for AddrV2
* Use prop_assert in AddrV2 proptests
* Use a generic utility method for deserializing IP addresses in `addrv2`
* Document the purpose of a conversion to MetaAddr
* Fix a comment typo, and clarify that comment
* Clarify the unsupported AddrV2 network ID error and enum variant names
```sh
fastmod AddrV2UnimplementedError UnsupportedAddrV2NetworkIdError zebra-network
fastmod Unimplemented Unsupported zebra-network
```
* Fix and clarify unsupported AddrV2 comments
* Replace `panic!` with `unreachable!`
* Clarify a comment about skipping a length check in a test
* Remove a redundant test
* Basic addr (v1) and addrv2 deserialization tests
* Test deserialized IPv4 and IPv6 values in addr messages
* Remove redundant io::Cursor
* Add comments with expected values of address test vectors
* Update `tower` to version `0.4.9`
Update to latest version to add support for Tokio version 1.
* Replace usage of `ServiceExt::ready_and`
It was deprecated in favor of `ServiceExt::ready`.
* Update Tokio dependency to version `1.13.0`
This will break the build because the code isn't ready for the update,
but future commits will fix the issues.
* Replace import of `tokio::stream::StreamExt`
Use `futures::stream::StreamExt` instead, because newer versions of
Tokio don't have the `stream` feature.
* Use `IntervalStream` in `zebra-network`
In newer versions of Tokio `Interval` doesn't implement `Stream`, so the
wrapper types from `tokio-stream` have to be used instead.
* Use `IntervalStream` in `inventory_registry`
In newer versions of Tokio the `Interval` type doesn't implement
`Stream`, so `tokio_stream::wrappers::IntervalStream` has to be used
instead.
* Use `BroadcastStream` in `inventory_registry`
In newer versions of Tokio `broadcast::Receiver` doesn't implement
`Stream`, so `tokio_stream::wrappers::BroadcastStream` instead. This
also requires changing the error type that is used.
* Handle `Semaphore::acquire` error in `tower-batch`
Newer versions of Tokio can return an error if the semaphore is closed.
This shouldn't happen in `tower-batch` because the semaphore is never
closed.
* Handle `Semaphore::acquire` error in `zebrad` test
On newer versions of Tokio `Semaphore::acquire` can return an error if
the semaphore is closed. This shouldn't happen in the test because the
semaphore is never closed.
* Update some `zebra-network` dependencies
Use versions compatible with Tokio version 1.
* Upgrade Hyper to version 0.14
Use a version that supports Tokio version 1.
* Update `metrics` dependency to version 0.17
And also update the `metrics-exporter-prometheus` to version 0.6.1.
These updates are to make sure Tokio 1 is supported.
* Use `f64` as the histogram data type
`u64` isn't supported as the histogram data type in newer versions of
`metrics`.
* Update the initialization of the metrics component
Make it compatible with the new version of `metrics`.
* Simplify build version counter
Remove all constants and use the new `metrics::incement_counter!` macro.
* Change metrics output line to match on
The snapshot string isn't included in the newer version of
`metrics-exporter-prometheus`.
* Update `sentry` to version 0.23.0
Use a version compatible with Tokio version 1.
* Remove usage of `TracingIntegration`
This seems to not be available from `sentry-tracing` anymore, so it
needs to be replaced.
* Add sentry layer to tracing initialization
This seems like the replacement for `TracingIntegration`.
* Remove unnecessary conversion
Suggested by a Clippy lint.
* Update Cargo lock file
Apply all of the updates to dependencies.
* Ban duplicate tokio dependencies
Also ban git sources for tokio dependencies.
* Stop allowing sentry-tracing git repository in `deny.toml`
* Allow remaining duplicates after the tokio upgrade
* Use C: drive for CI build output on Windows
GitHub Actions uses a Windows image with two disk drives, and the
default D: drive is smaller than the C: drive. Zebra currently uses a
lot of space to build, so it has to use the C: drive to avoid CI build
failures because of insufficient space.
Co-authored-by: teor <teor@riseup.net>
* Fix some links and linewraps
* Flesh out module-level rustdoc for mempool component
* Links for Downloads and Storage
* Tidy rustdoc links
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Avoid spurious test failures on busy machines
* Revert "Avoid spurious test failures on busy machines"
This reverts commit 4430a48ef3.
* Increase request delay for mock network service
This is necessary because some tests were having timeouts when running
on macOS for the CI. This meant that it took longer than expected for
the subject under test to end up sending the network request.
Co-authored-by: teor <teor@riseup.net>
* Tidy links and notes for some mempool rustdoc
* Fix link
* Fix some links and linewraps
* minor spacing
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Limit the size and age of the ZIP-401 rejected transaction ID list
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Fix bug in EvictionList; improve documentation
* Separate public and non-public parts of the documentation
* Fix tests
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Fix bug in EvictionList::len()
* Make EvictionList::len() mutable; prune the list inside it
* Limit the size of EvictedList::ordered_entries
* Increase eviction_list_time_mixed time constants to try to make it pass on MacOS
* Simplify logic by assuming refreshes will never happen
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Compiling fixes
* Remove MEMPOOL_SIZE and just rely on the ZIP-401 cost limit
Co-authored-by: teor <teor@riseup.net>
* ZIP-401 weighted random mempool eviction
* rename zcash.mempool.total_cost.bytes to zcash.mempool.cost.bytes
Co-authored-by: teor <teor@riseup.net>
* Remove duplicated lines
* Add cost() method to UnminedTx
Update serialization failure messages
* More docs quoting ZIP-401 rules
* Change mempool::Storage::new() to handle Copy-less HashMap, HashSet
* mempool: tidy cost types and evict_one()
* More consensus rule docs
* Refactor calculating mempool costs for Unmined transactions
* Add a note on asympotic performance of calculating weights of txs in mempool
* Bump test mempool / storage config to avoid weighted random cost limits
* Use mempool tx_cost_limit = u64::MAX for some tests
* Remove failing tests for now
* Allow(clippy::field-reassign-with-default) because of a move on a type that doesn't impl Copy
* Fix mistaken doctest formatting
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Increase test timeout for Windows builds
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Try simulating a chain growth
* Adjust the transaction expiry height
The mempool evicts expired transactions. When working with mocked data,
appending a new block typically clears the mempool because transactions become
expired. For this reason, the expiry height of each transactions is adjusted so
that it is greater than the new chain tip's height.
* Refactor the code so that it works with `VerifiedUnminedTx`
* Fix a typo
* Fix clippy warnings
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
There are a lot of these messages when Zebra starts up.
They might be slowing down CI and causing timeouts.
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
This matches the settings for `sync_large_checkpoints_mainnet`.
Also reduce the number of blocks synced to reduce network load.
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Increment the crates that have new commits since the last version
* Increment the crates that depend on crates that have changed
* Increment the version of `zebra-script`
* Use the `zebrad` version in the `zebra-network` user agent string
* Use the `v1.0.0-alpha.19` git tag in `README.md`
* Copy the draft changelog into `CHANGELOG.md`
* Delete bumps
* Update CHANGELOG.md
Co-authored-by: teor <teor@riseup.net>
* Add newly merged PRs
Co-authored-by: teor <teor@riseup.net>
* Create a `NowOrLater` helper type
A replacement for `FutureExt::now_or_never` that ensures that the task
is scheduled for waking up later when the inner future is ready.
* Use `NowOrLater` to fix possible delay bug
Previous usage of `now_or_never` meant that the underlying task wasn't
being scheduled to awake when the `Downloads` stream produced a new
item. Using `NowOrLater` instead fixes that issue.
* Increase the restart test timeout to 10 seconds
It shouldn't take this long.
But maybe the CI VMs are under a lot of load?
* Add extensive logging to diagnose CI state reload failures
* Ignore AlreadyInChain error in the syncer
* Split Cancelled errors; add them to should_restart_sync exceptions
* Also filter 'block is already comitted'; try to detect a wrong downcast
* Rename tx downloader & verifier metrics
* Add version to mempool metrics
* Add new metrics
* Make sure mempool gauges are zeroed when instances are dropped
* Updated mempool grafana dashboard
* Removed transaction verification dashboard; moved to mempool
* Update mempool dashboard
* Add reason to error labels in mempool dashboard
* Rename some metrics per review
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Guarantee unique IDs in mempool service responses
* Guarantee unique IDs in crawler task mempool Queue requests
Also update the tests to use unique IDs.
* Add a CheckForVerifiedTransactions mempool request
Also document the mempool request and response variants.
* Spawn a QueueChecker task to check for newly verified transactions
This task makes sure that transactions reliably propagate,
rather than relying on peer requests or responses to trigger propagation.
* Update the start command documentation
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Impl Drop, Default and take() for ActiveState
* Refactor Mempool::poll_ready to check disabled and reset first
Also remove some levels of nesting.
* Use the same code for dropping and resetting the mempool
* Document where the tasks are dropped when switching states
* Log mempool resets at info level
And add heights to mempool enable/disable/reset logs
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Guarantee unique IDs in mempool service responses
* Guarantee unique IDs in crawler task mempool Queue requests
Also update the tests to use unique IDs.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Create a new VerifiedUnminedTx containing the miner fee
* Use VerifiedUnminedTx in mempool verification responses
And do a bunch of other cleanups.
* Use VerifiedUnminedTx in mempool download and verifier
* Use VerifiedUnminedTx in mempool storage and verified set
* Impl Display for VerifiedUnminedTx, and some convenience methods
* Use VerifiedUnminedTx in existing tests
* add some additional checks to the acceptance mempool test
* add an additional mempool test
* do proposed fixes to `sync_until`
* Ignore "can't kill an exited process" errors
Co-authored-by: teor <teor@riseup.net>
* Get the transaction fee from utxos
* Return the transaction fee from the verifier
* Avoid calculating the fee for coinbase transactions
Coinbase transactions don't have fees. In case of a coinbase transaction, the
verifier returns a zero fee.
* Update the result obtained by `Downloads`
* Update some comments
* Add a mempool debug_enable_at_height config
* Rename a field in the mempool crawler
* Propagate syncer channel errors through the crawler
We don't want to ignore these errors, because they might indicate a shutdown.
(Or a bug that we should fix.)
* Use debug_enable_at_height in the mempool crawler
* Log when the mempool is activated or deactivated
* Deny unknown fields and apply defaults for all configs
* Move Duration last, as required for TOML tables
* Add a basic mempool acceptance test
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* do not advertise rejected transactions
* do not broadcast transaction that are expired
* change dummy var name
* simplify code, performance
* clippy
* add some test coverage
* clippy
Co-authored-by: teor <teor@riseup.net>
* Split mempool config into its own module
Also:
- expand config docs
- clean up mempool imports
* Pass the mempool config to the mempool
* Create the transaction sender channel inside the mempool 1/2
This simplifies all the code that calls the mempool.
Also:
- update the mempool enabled state before returning the new mempool
- add some test module doc comments
* Refactor a setup function out of the mempool unit tests 2/2
Also:
- update the setup function to handle the latest mempool changes
* Clarify a comment
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Limit the size of rejection lists when there is a spend conflict
Previously, `insert` would return early with an error,
and skip limiting the rejection list sizes.
* Use prop_assert macros in proptests, rather than assert
* Add `HashSet`s to help spend conflict detection
Keep track of the spent transparent outpoints and the revealed
nullifiers.
Clippy complained that the `ActiveState` had variants with large size
differences, but that was expected, so I disabled that lint on that
`enum`.
* Clear the `HashSet`s when clearing the mempool
Clear them so that they remain consistent with the set of verified
transactions.
* Use `HashSet`s to check for spend conflicts
Store new outputs into its respective `HashSet`, and abort if a
duplicate output is found.
* Remove inserted outputs when aborting
Restore the `HashSet` to its previous state.
* Remove tracked outputs when removing a transaction
Keep the mempool storage in a consistent state when a transaction is
removed.
* Remove tracked outputs when evicting from mempool
Ensure eviction also keeps the tracked outputs consistent with the
verified transactions.
* Refactor to create a `VerifiedSet` helper type
Move the code to handle the output caches into the new type. Also move
the eviction code to make things a little simpler.
* Refactor to have a single `remove` method
Centralize the code that handles the removal of a transaction to avoid
mistakes.
* Move mempool size limiting back to `Storage`
Because the evicted transactions must be added to the rejected list.
* Remove leftover `dbg!` statement
Leftover from some temporary testing code.
Co-authored-by: teor <teor@riseup.net>
* Remove unnecessary `TODO`
It is more speculation than planning, so it doesn't add much value.
Co-authored-by: teor <teor@riseup.net>
* Fix typo in documentation
The verb should match the subject "transactions" which is plural.
Co-authored-by: teor <teor@riseup.net>
* Add a comment to warn about correctness
There's a subtle but important detail in the implementation that should
be made more visible to avoid mistakes in the future.
Co-authored-by: teor <teor@riseup.net>
* Remove outdated comment
Left-over from the attempt to move the eviction into the `VerifiedSet`.
* Improve comment explaining lint removal
Rewrite the comment explaining why the Clippy lint was ignored.
* Check for spend conflicts in `VerifiedSet`
Refactor to avoid API misuse.
* Test rejected transaction rollback
Using two transactions, perform the same test adding a conflict to both
of them to check if the second inserted transaction is properly
rejected. Then remove any conflicts from the second transaction and add
it again. That should work, because if it doesn't it means that when the
second transaction was rejected it left things it shouldn't in the
cache.
* Test removal of multiple transactions
When removing multiple transactions from the mempool storage, all of the
ones requested should be removed and any other transaction should be
still be there afterwards.
* Increase mempool size to 4, so that spend conflict tests work
If the mempool size is smaller than 4,
these tests don't fail on a trivial removal bug.
Because we need a minimum number of transactions in the mempool
to trigger the bug.
Also commit a proptest seed that fails on a trivial removal bug.
(This seed fails if we remove indexes in order,
because every index past the first removes the wrong transaction.)
* Summarise transaction data in proptest error output
* Summarise spend conflict field data in proptest error output
* Summarise multiple removal field data in proptest error output
And replace the very large proptest debug output with the new summary.
Co-authored-by: teor <teor@riseup.net>
* bradcast transactions to peers after they get inserted into mempool
* remove network argument from mempool init
* remove dbg left
* remove return value in mempool enable call
* rename channel sender and receiver vars
* change unwrap() to expect()
* change the channel to a hashset
* fix build
* fix tests
* rustfmt
* fix tiny space issue inside macro
Co-authored-by: teor <teor@riseup.net>
* check errors/panics in transaction gossip tests
* fix build of newly added tests
* Stop dropping the inbound service and mempool in a test
Keeping the mempool around avoids a transaction broadcast task error,
so we can test that there are no other errors in the task.
* Tweak variable names and add comments
* Avoid unexpected drops by returning a mempool guard in tests
* Use BoxError to simplify service types in tests
* Make all returned service types consistent in tests
We want to be able to change the setup without changing the tests.
Co-authored-by: teor <teor@riseup.net>
* Split mempool storage errors into tip-based and chain-based
* Expire tip rejections every time we get a new block
FailedVerification and SpendConflict rejections only apply to the current tip.
The next tip can provide missing inputs, or evict conflicting transactions.
* Enforce MAX_EVICTION_MEMORY_ENTRIES for mempool reject lists
* Implement a task that gossips verified block hashes
* Log an info message for block broadcasts
* Simplify the gossip task
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Re-use the old tip change if there is no new tip change
Also improve the comments.
* Add an assertion message
* Rename task join handles and futures in start method
* Add a dedicated BlockGossipError type
This type helps distinguish between syncer and state errors.
* Test that committed blocks are gossiped to peers
Also do a minor type cleanup on the existing test code,
replacing `Option<Vec<_>>` with `Vec<_>`.
* Formatting
* Remove excess newlines
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Clear the initial gossiped blocks during test setup
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Remove unused mempool storage errors
Preparation for ticket #2819.
Removing these errors means that we don't have to decide
which type of transaction ID match we want for them.
* Remove unused mempool errors, and deduplicate storage errors
* rustfmt
* Add a mempool transaction removal method for mined IDs
And use this method to remove expired transactions,
because all transactions with the same mined ID expire at the same height.
* Remove mined transaction IDs from the mempool
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Update versions for zebra v1.0.0-alpha.18 release
* WIP: Initial PR list
* Remove uninteresting version bumps from CHANGELOG
* Categorise and group PRs in CHANGELOG, removing uninteresting PRs
* Further refine and categorise changelog entries
* Fix tag url
* Final changes to CHANGELOG
* Add a changelog description
* Spacing
* Clarify and fix changelog PR descriptions
* Add PRs that are about to be merged
* More slight clarifications
* Spacing
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Rename type parameter to be more explicit
Replace the single letter with a proper name.
* Remove imports for `Request` and `Response`
The type names will conflict with the ones for the mempool service.
* Attach `Mempool` service to the `Crawler`
Add a field to the `Crawler` type to store a way to access the `Mempool`
service.
* Forward crawled transactions to downloader
The crawled transactions are now sent to the transaction downloader and
verifier, to be included in the mempool.
* Derive `Eq` and `PartialEq` for `mempool::Request`
Make it simpler to use the `MockService::expect_request` method.
* Test if crawled transactions are downloaded
Create some dummy crawled transactions, and let the crawler discover
them. Then check if they are forwarded to the mempool to be downloaded
and verified.
* Don't send empty transaction ID list to downloader
Ignore response from peers that don't provide any crawled transactions.
* Log errors when forwarding crawled transaction IDs
Calling the Mempool service should not fail, so if an error happens it
should be visible. However, errors when downloading individual
transactions can happen from time to time, so there's no need for them
to be very visible.
* Document existing `mempool::Crawler` test
Provide some depth as to what the test expect from the crawler's
behavior.
* Refactor to create `setup_crawler` helper function
Make it easier to reuse the common test setup code.
* Simplify code to expect requests
Now that `zebra_network::Request` implement `Eq`, the call can be
simplified into `expect_request`.
* Refactor to create `respond_with_transaction_ids`
A helper function that checks for a network crawl request and responds
with the given list of crawled transaction IDs.
* Refactor to create `crawler_iterator` helper
A function to intercept and respond to the fanned-out requests sent
during a single crawl iteration.
* Refactor to create `respond_to_queue_request`
Reduce the repeated code necessary to intercept and reply to a request
for queuing transactions to be downloaded.
* Add `respond_to_queue_request_with_error` helper
Intercepts a mempool request to queue transactions to be downloaded, and
responds with an error, simulating an internal problem in the mempool
service implementation.
* Derive `Arbitrary` for `NetworkUpgrade`
This is required for deriving `Arbitrary` for some error types.
* Derive `Arbitrary` for `TransactionError`
Allow random transaction errors to be generated for property tests.
* Derive `Arbitrary` for `MempoolError`
Allow random Mempool errors to be generated for property tests.
* Test if errors don't stop the mempool crawler
The crawler should be robust enough to continue operating even if the
mempool service fails to download transactions or even fails to handle
requests to enqueue transactions.
* Reduce the log level for download errors
They should happen regularly, so there's no need to have them with a
high visibility level.
Co-authored-by: teor <teor@riseup.net>
* Stop crawler if service stops
If `Mempool::poll_ready` returns an error, it's because the mempool
service has stopped and can't handle any requests, so the crawler should
stop as well.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Move mempool tests into `tests::vector` sub-module
Make it consistent with other test modules and prepare for adding
property tests.
* Reorder imports
Make it consistent with the general guidelines followed on other
modules.
* Export `ChainTipBlock` and `ChainTipSender`
Allow these types to be used in other crates for testing purposes.
* Derive `Arbitrary` for `ChainTipBlock`
Make it easy to generate random `ChainTipBlock`s for usage in property
tests.
* Refactor to move test methods into `tests` module
Reduce the repeated test configuration attributes and make it easier to
see what is test specific and what is part of the general
implementation.
* Add a `Mempool::dummy_call` test helper method
Performs a dummy call just so that `poll_ready` gets called.
* Use `dummy_call` in existing tests
Replace the custom dummy requests with the helper method.
* Test if the mempool is cleared on chain reset
A chain reset should force the mempool storage to be cleared so that
transaction verification can restart using the new chain tip.
* Test if mempool is cleared on syncer restart
If the block synchronizer falls behind and then starts catching up
again, the mempool should be disabled and therefore the storage should
be cleared.
* Send mined transaction IDs to the download and verify task for cancellation
* Pass a HashSet of transaction hashes to be cancelled
* Add mempool_cancel_mined() test
* Fix starvation in test
* Fix typo in comment
* mempool - support transaction expiration
* use `LatestChainTip` instead of state call
* clippy
* remove spawn task
* remove non needed async from function
* remove return value
* add a `expiry_height_mut()` method to `Transaction` for testing purposes
* fix `remove_expired_transactions()`
* add a `mempool_transaction_expiration()` test
* tidy cleanup to `expiry_height()`
* improve docs
* fix the build
* try fix macos build
* extend tests
* add doc to function
* clippy
* fix build
* start tests at block two
* Cancel download and verify tasks when the mempool is deactivated
* Refactor enable/disable logic to use a state enum
* Add helper test functions to enable/disable the mempool
* Add documentation about errors on service calls
* Improvements from review
* Improve documentation
* Fix bug in test
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
* Add `Transaction::spent_outpoints` getter method
Returns an iterator over the UTXO `OutPoint`s spent by the transaction.
* Add `mempool::Error::Conflict` variant
An error representing that a transaction was rejected because it
conflicts with another transaction that's already in the mempool.
* Reject conflicting mempool transactions
Reject including a transaction in the mempool if it spends outputs
already spent by, or reveals nullifiers already revealed by another
transaction in the mempool.
* Fix typo in documentation
Remove the `r` that was incorrectly added.
Co-authored-by: teor <teor@riseup.net>
* Specify that the conflict is a spend conflict
Make the situation clearer, because there are other types of conflict.
Co-authored-by: teor <teor@riseup.net>
* Clarify that the outpoints are from inputs
Because otherwise it could lead to confusion because it could also mean
the outputs of the transaction represented as `OutPoint` references.
Co-authored-by: teor <teor@riseup.net>
* Create `storage::tests::vectors` module
Refactor to follow the convention used for other tests.
* Add an `AtLeastOne::first_mut` method
A getter to allow changing the first element.
* Add an `AtLeastOne::push` method
Allow appending elements to the collection.
* Derive `Arbitrary` for `FieldNotPresent`
This is just to make the code that generates arbitrary anchors a bit
simpler.
* Test if conflicting transactions are rejected
Generate two transactions (either V4 or V5) and insert a conflicting
spend, which can be either a transparent UTXO, or a nullifier for one of
the shielded pools. Check that any attempt to insert both transactions
causes one to be accepted and the other to be rejected.
* Delete a TODO comment that we decided not to do
Co-authored-by: teor <teor@riseup.net>
* Add tests for mempool Request::Queue
* Update test to work after refactoring
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Send `Response::Nil` instead of sending empty `Message`s
This matches `zcashd`'s behaviour more closely.
In most cases, the network layer filters these out already.
But this change makes the the inbound service code clearer.
* revert changes made to `AdvertiseTransactionIds` and `PushTransaction`
* remove newline
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Update the expiry TODO
* Clear the mempool at a chain tip reset
* Clear the mempool by using a sync method (#2777)
* Clear the mempool by using a sync method
* Update docs
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Refactor last_tip_change()
* Apply suggestions from code review
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Fix brackets
* Use best_tip_block instead of manual borrowing
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Remove return of redundant vector length
An attempt to improve readability a bit by not returning a tuple with a
value that can be obtained from a single return type.
* Refactor `unmined_transactions_in_blocks`
Use a more functional style to try to make it a bit clearer.
* Use ranges in `unmined_transactions_in_blocks`
Allow a finer control over the block range to extract the transactions
from.
* Refactor mempool test code to improve clarity
It was previously not clear that only the first genesis transaction was
being used. The remaining transactions in the genesis block were
discarded and then readded later.
* Replace `oneshot` with `call`
Remove a redundant internal `ready_and` call.
* Return an `impl Iterator` instead of a `Vec<_>`
Remove unnecessary deserializations and heap allocations.
* Refactor `mempool_storage_basic_for_network` test
Make the separation between the transactions expected to be in the
mempool and those expected to be rejected clearer.
* Replace `Iterator` with `DoubleEndedIterator`
Allow getting the last transaction more easily.
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Use `MockService` in inbound test
Refactor the `mempool_requsets_for_transactions` test so that it uses a
`MockService` instead of the `mock_peer_set` function.
* Use `MockService` in the basic mempool test
Refactor the `mempool_service_basic` test so that it uses a
`MockService` instead of the `mock_peer_set` helper function.
* Remove the `mock_peer_set` helper function
It is not used anymore, since the usages were replaced with
`MockService`s.
* add tests for mempool inbound requests
* Use MockService for transaction verifier
* Refactor creation of mock `peer_set`
Use the same style as the mock transaction verifier.
* Derive `Eq` for `zebra_network::Request`
Make it easy to use the `MockService::expect_request` method.
* Return mocked peer set service from `setup`
Allow it to be used to respond to requests.
* Add bindings for the transaction used for testing
Allow them to be moved into futures later.
* Respond to transaction download request
Make sure that the test transaction appears to the mempool as if it had
been downloaded by the peer set service.
* Assert that no unexpected requests were received
Check that the mempool doesn't send unexpected requests to the peer set
service.
* add tests for mempool inbound requests
* Use MockService for transaction verifier
* add missing `expect_no_requests` to `mempool_advertise_transaction_ids` test
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Use `MockService` in inbound test
Refactor the `mempool_requsets_for_transactions` test so that it uses a
`MockService` instead of the `mock_peer_set` function.
* Use `MockService` in the basic mempool test
Refactor the `mempool_service_basic` test so that it uses a
`MockService` instead of the `mock_peer_set` helper function.
* Remove the `mock_peer_set` helper function
It is not used anymore, since the usages were replaced with
`MockService`s.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Allow deliberate instances of the new nightly clippy::derivable_impls lint
We want our config defaults to be explicit.
Not so sure about the application defaults, but they also contain a config.
* Also allow unknown lint names
Stable doesn't know about this lint, but nightly does.
* Implement initial service mocking helpers
Adds a [`MockService`] type, which can be configured and built for usage
in unit tests or proptests. The mocked service can then be used to
intercept requests and respond indivdiually to them.
* Use `MockService in the `mempool::Crawler` test
Refactor it to remove the helper mock function, and use the new
`MockService` helper type.
* Use `MockService` in `CandidateSet` test vectors
Refactor to remove the manual mocking of the peer set service.
* Panic if a response is not sent by `MockService`
Change the current semantics to require all `MockService` usages to
respond to every intercepted request.
A `must_use` attribute was added to the `ResponseSender` so that the
compiler can warn when this doesn't happen.
* Allow generic error types in `MockService`
Replace the hard-coded `BoxError` as the `Service`'s error type with a
generic type parameter. This allows mocking services in locations that
require specific error types.
* Add a `ResponseSender::request` getter
Allow inspecting the request again before responding, and using
information from the request in the response.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Pass sync_status to mempool
* Update zebrad/src/components/mempool.rs
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Remove enabled flag for now; will be handled in #2723
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
teor
Janito Vaqueiro Ferreira Filho
Deirdre Connolly
dependabot[bot]
Alfredo Garcia
Deirdre Connolly
Dimitris Apostolou
Conrado Gouvea
Pili Guerra
Marek