Cleaned up generated code
This commit is contained in:
parent
7729130541
commit
744aaef6a5
|
@ -54,6 +54,8 @@ NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
|||
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
|
||||
NVIC.TIM6_IRQn=true\:2\:0\:true\:false\:true\:true\:true
|
||||
NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true
|
||||
PA0.GPIOParameters=GPIO_Label
|
||||
PA0.GPIO_Label=D0
|
||||
PA0.Locked=true
|
||||
|
|
63
Inc/adc.h
63
Inc/adc.h
|
@ -1,58 +1,7 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* File Name : ADC.h
|
||||
* Description : This file provides code for the configuration
|
||||
* of the ADC instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __adc_H
|
||||
#define __adc_H
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#ifndef ADC_H
|
||||
#define ADC_H
|
||||
|
||||
#include "stm32f0xx_system.h"
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern ADC_HandleTypeDef hadc;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_ADC_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /*__ adc_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
61
Inc/gpio.h
61
Inc/gpio.h
|
@ -1,57 +1,8 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* File Name : gpio.h
|
||||
* Description : This file contains all the functions prototypes for
|
||||
* the gpio
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
#ifndef GPIO_H
|
||||
#define GPIO_H
|
||||
|
||||
#include "stm32f0xx_system.h"
|
||||
|
||||
void initialise_gpio(void);
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __gpio_H
|
||||
#define __gpio_H
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_GPIO_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /*__ pinoutConfig_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
119
Inc/main.h
119
Inc/main.h
|
@ -1,119 +0,0 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.h
|
||||
* @brief : Header for main.c file.
|
||||
* This file contains the common defines of the application.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __MAIN_H
|
||||
#define __MAIN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f0xx_hal.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
#define BOARD_RESET_Pin GPIO_PIN_13
|
||||
#define BOARD_RESET_GPIO_Port GPIOC
|
||||
#define BOARD_POWER_Pin GPIO_PIN_14
|
||||
#define BOARD_POWER_GPIO_Port GPIOC
|
||||
#define BOARD_RUN_Pin GPIO_PIN_15
|
||||
#define BOARD_RUN_GPIO_Port GPIOC
|
||||
#define ROM_ACTIVE_Pin GPIO_PIN_0
|
||||
#define ROM_ACTIVE_GPIO_Port GPIOC
|
||||
#define D0_Pin GPIO_PIN_0
|
||||
#define D0_GPIO_Port GPIOA
|
||||
#define D1_Pin GPIO_PIN_1
|
||||
#define D1_GPIO_Port GPIOA
|
||||
#define D2_Pin GPIO_PIN_2
|
||||
#define D2_GPIO_Port GPIOA
|
||||
#define D3_Pin GPIO_PIN_3
|
||||
#define D3_GPIO_Port GPIOA
|
||||
#define D4_Pin GPIO_PIN_4
|
||||
#define D4_GPIO_Port GPIOA
|
||||
#define D5_Pin GPIO_PIN_5
|
||||
#define D5_GPIO_Port GPIOA
|
||||
#define D6_Pin GPIO_PIN_6
|
||||
#define D6_GPIO_Port GPIOA
|
||||
#define D7_Pin GPIO_PIN_7
|
||||
#define D7_GPIO_Port GPIOA
|
||||
#define SR_DATAIN_Pin GPIO_PIN_4
|
||||
#define SR_DATAIN_GPIO_Port GPIOC
|
||||
#define TARGET_VOLTAGE_Pin GPIO_PIN_0
|
||||
#define TARGET_VOLTAGE_GPIO_Port GPIOB
|
||||
#define ROM_WE_Pin GPIO_PIN_11
|
||||
#define ROM_WE_GPIO_Port GPIOB
|
||||
#define ROM_OE_Pin GPIO_PIN_12
|
||||
#define ROM_OE_GPIO_Port GPIOB
|
||||
#define ROM_CE_Pin GPIO_PIN_13
|
||||
#define ROM_CE_GPIO_Port GPIOB
|
||||
#define DATA_ROM_CE_Pin GPIO_PIN_14
|
||||
#define DATA_ROM_CE_GPIO_Port GPIOB
|
||||
#define DATA_DIR_Pin GPIO_PIN_15
|
||||
#define DATA_DIR_GPIO_Port GPIOB
|
||||
#define SR_OE_Pin GPIO_PIN_6
|
||||
#define SR_OE_GPIO_Port GPIOC
|
||||
#define SR_RST_Pin GPIO_PIN_7
|
||||
#define SR_RST_GPIO_Port GPIOC
|
||||
#define SR_STRB_Pin GPIO_PIN_8
|
||||
#define SR_STRB_GPIO_Port GPIOC
|
||||
#define SR_DATA_Pin GPIO_PIN_9
|
||||
#define SR_DATA_GPIO_Port GPIOC
|
||||
#define SR_CLK_Pin GPIO_PIN_8
|
||||
#define SR_CLK_GPIO_Port GPIOA
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __MAIN_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,60 @@
|
|||
#ifndef PORT_DEFINITIONS_H
|
||||
#define PORT_DEFINITIONS_H
|
||||
|
||||
#include "stm32f0xx_hal.h"
|
||||
|
||||
#define BOARD_RESET_Pin GPIO_PIN_13
|
||||
#define BOARD_RESET_GPIO_Port GPIOC
|
||||
#define BOARD_POWER_Pin GPIO_PIN_14
|
||||
#define BOARD_POWER_GPIO_Port GPIOC
|
||||
#define BOARD_RUN_Pin GPIO_PIN_15
|
||||
#define BOARD_RUN_GPIO_Port GPIOC
|
||||
|
||||
#define D0_Pin GPIO_PIN_0
|
||||
#define D0_GPIO_Port GPIOA
|
||||
#define D1_Pin GPIO_PIN_1
|
||||
#define D1_GPIO_Port GPIOA
|
||||
#define D2_Pin GPIO_PIN_2
|
||||
#define D2_GPIO_Port GPIOA
|
||||
#define D3_Pin GPIO_PIN_3
|
||||
#define D3_GPIO_Port GPIOA
|
||||
#define D4_Pin GPIO_PIN_4
|
||||
#define D4_GPIO_Port GPIOA
|
||||
#define D5_Pin GPIO_PIN_5
|
||||
#define D5_GPIO_Port GPIOA
|
||||
#define D6_Pin GPIO_PIN_6
|
||||
#define D6_GPIO_Port GPIOA
|
||||
#define D7_Pin GPIO_PIN_7
|
||||
#define D7_GPIO_Port GPIOA
|
||||
|
||||
#define TARGET_VOLTAGE_Pin GPIO_PIN_0
|
||||
#define TARGET_VOLTAGE_GPIO_Port GPIOB
|
||||
|
||||
#define ROM_ACTIVE_Pin GPIO_PIN_0
|
||||
#define ROM_ACTIVE_GPIO_Port GPIOC
|
||||
#define ROM_WE_Pin GPIO_PIN_11
|
||||
#define ROM_WE_GPIO_Port GPIOB
|
||||
#define ROM_OE_Pin GPIO_PIN_12
|
||||
#define ROM_OE_GPIO_Port GPIOB
|
||||
#define ROM_CE_Pin GPIO_PIN_13
|
||||
#define ROM_CE_GPIO_Port GPIOB
|
||||
|
||||
#define DATA_ROM_CE_Pin GPIO_PIN_14
|
||||
#define DATA_ROM_CE_GPIO_Port GPIOB
|
||||
#define DATA_DIR_Pin GPIO_PIN_15
|
||||
#define DATA_DIR_GPIO_Port GPIOB
|
||||
|
||||
#define SR_DATAIN_Pin GPIO_PIN_4
|
||||
#define SR_DATAIN_GPIO_Port GPIOC
|
||||
#define SR_OE_Pin GPIO_PIN_6
|
||||
#define SR_OE_GPIO_Port GPIOC
|
||||
#define SR_RST_Pin GPIO_PIN_7
|
||||
#define SR_RST_GPIO_Port GPIOC
|
||||
#define SR_STRB_Pin GPIO_PIN_8
|
||||
#define SR_STRB_GPIO_Port GPIOC
|
||||
#define SR_DATA_Pin GPIO_PIN_9
|
||||
#define SR_DATA_GPIO_Port GPIOC
|
||||
#define SR_CLK_Pin GPIO_PIN_8
|
||||
#define SR_CLK_GPIO_Port GPIOA
|
||||
|
||||
#endif
|
|
@ -1,65 +0,0 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f0xx_it.h
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F0xx_IT_H
|
||||
#define __STM32F0xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F0xx_IT_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,24 @@
|
|||
#ifndef STM32F0xx_SYSTEM_H
|
||||
#define STM32F0xx_SYSTEM_H
|
||||
|
||||
#include "stm32f0xx_hal.h"
|
||||
#include "port_definitions.h"
|
||||
|
||||
extern ADC_HandleTypeDef hadc;
|
||||
extern TIM_HandleTypeDef htim6;
|
||||
extern UART_HandleTypeDef huart1;
|
||||
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
void SystemClock_Config(void);
|
||||
void Error_Handler();
|
||||
|
||||
void MX_ADC_Init(void);
|
||||
void MX_GPIO_Init(void);
|
||||
void MX_TIM6_Init(void);
|
||||
void MX_USART1_UART_Init(void);
|
||||
|
||||
#endif
|
58
Inc/tim.h
58
Inc/tim.h
|
@ -1,58 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* File Name : TIM.h
|
||||
* Description : This file provides code for the configuration
|
||||
* of the TIM instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __tim_H
|
||||
#define __tim_H
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern TIM_HandleTypeDef htim6;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_TIM6_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /*__ tim_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,7 @@
|
|||
#ifndef TIMERS_H
|
||||
#define TIMERS_H
|
||||
|
||||
#include "stm32f0xx_system.h"
|
||||
|
||||
|
||||
#endif
|
62
Inc/usart.h
62
Inc/usart.h
|
@ -1,58 +1,6 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* File Name : USART.h
|
||||
* Description : This file provides code for the configuration
|
||||
* of the USART instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __usart_H
|
||||
#define __usart_H
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#ifndef USART_H
|
||||
#define USART_H
|
||||
|
||||
#include "stm32f0xx_system.h"
|
||||
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern UART_HandleTypeDef huart1;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_USART1_UART_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /*__ usart_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
117
Src/adc.c
117
Src/adc.c
|
@ -1,119 +1,2 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* File Name : ADC.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the ADC instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "adc.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
ADC_HandleTypeDef hadc;
|
||||
|
||||
/* ADC init function */
|
||||
void MX_ADC_Init(void)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig = {0};
|
||||
|
||||
/** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc.Instance = ADC1;
|
||||
hadc.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
|
||||
hadc.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
|
||||
hadc.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
hadc.Init.LowPowerAutoWait = DISABLE;
|
||||
hadc.Init.LowPowerAutoPowerOff = DISABLE;
|
||||
hadc.Init.ContinuousConvMode = DISABLE;
|
||||
hadc.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||
hadc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||
hadc.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc.Init.Overrun = ADC_OVR_DATA_PRESERVED;
|
||||
if (HAL_ADC_Init(&hadc) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Configure for the selected ADC regular channel to be converted.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_8;
|
||||
sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
|
||||
if (HAL_ADC_ConfigChannel(&hadc, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(adcHandle->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 0 */
|
||||
/* ADC1 clock enable */
|
||||
__HAL_RCC_ADC1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**ADC GPIO Configuration
|
||||
PB0 ------> ADC_IN8
|
||||
*/
|
||||
GPIO_InitStruct.Pin = TARGET_VOLTAGE_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(TARGET_VOLTAGE_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN ADC1_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
|
||||
{
|
||||
|
||||
if(adcHandle->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC1_CLK_DISABLE();
|
||||
|
||||
/**ADC GPIO Configuration
|
||||
PB0 ------> ADC_IN8
|
||||
*/
|
||||
HAL_GPIO_DeInit(TARGET_VOLTAGE_GPIO_Port, TARGET_VOLTAGE_Pin);
|
||||
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
119
Src/gpio.c
119
Src/gpio.c
|
@ -1,118 +1,9 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* File Name : gpio.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of all used GPIO pins.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "gpio.h"
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* Configure GPIO */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/** Configure pins as
|
||||
* Analog
|
||||
* Input
|
||||
* Output
|
||||
* EVENT_OUT
|
||||
* EXTI
|
||||
*/
|
||||
void MX_GPIO_Init(void)
|
||||
void initialise_gpio(void)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, BOARD_RESET_Pin|BOARD_RUN_Pin|SR_OE_Pin|SR_RST_Pin, GPIO_PIN_SET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, ROM_ACTIVE_Pin|SR_STRB_Pin|SR_DATA_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOA, D0_Pin|D1_Pin|D2_Pin|D3_Pin
|
||||
|D4_Pin|D5_Pin|D6_Pin|D7_Pin
|
||||
|SR_CLK_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOB, ROM_WE_Pin|ROM_OE_Pin|ROM_CE_Pin|DATA_ROM_CE_Pin
|
||||
|DATA_DIR_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pins : PCPin PCPin PCPin */
|
||||
GPIO_InitStruct.Pin = BOARD_RESET_Pin|BOARD_RUN_Pin|ROM_ACTIVE_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = BOARD_POWER_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(BOARD_POWER_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PAPin PAPin PAPin PAPin
|
||||
PAPin PAPin PAPin PAPin
|
||||
PAPin */
|
||||
GPIO_InitStruct.Pin = D0_Pin|D1_Pin|D2_Pin|D3_Pin
|
||||
|D4_Pin|D5_Pin|D6_Pin|D7_Pin
|
||||
|SR_CLK_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = SR_DATAIN_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(SR_DATAIN_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PBPin PBPin PBPin PBPin
|
||||
PBPin */
|
||||
GPIO_InitStruct.Pin = ROM_WE_Pin|ROM_OE_Pin|ROM_CE_Pin|DATA_ROM_CE_Pin
|
||||
|DATA_DIR_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PCPin PCPin PCPin PCPin */
|
||||
GPIO_InitStruct.Pin = SR_OE_Pin|SR_RST_Pin|SR_STRB_Pin|SR_DATA_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
MX_GPIO_Init();
|
||||
MX_ADC_Init();
|
||||
MX_USART1_UART_Init();
|
||||
MX_TIM6_Init();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
190
Src/main.c
190
Src/main.c
|
@ -1,189 +1,21 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32f0xx_system.h"
|
||||
#include "timers.h"
|
||||
#include "adc.h"
|
||||
#include "tim.h"
|
||||
#include "usart.h"
|
||||
#include "gpio.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
/* USER CODE BEGIN 1 */
|
||||
// Reset of all peripherals, Initializes the Flash interface and the Systick.
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
// Configure the system clock
|
||||
SystemClock_Config();
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
// Initialize all configured peripherals */
|
||||
initialise_gpio();
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_USART1_UART_Init();
|
||||
MX_ADC_Init();
|
||||
MX_TIM6_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI14|RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.HSI14State = RCC_HSI14_ON;
|
||||
RCC_OscInitStruct.HSI14CalibrationValue = 16;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
|
||||
RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1;
|
||||
PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK1;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(char *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
|
@ -20,7 +20,7 @@
|
|||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include <port_definitions.h>
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
|
|
@ -1,145 +0,0 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f0xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32f0xx_it.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M0 Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVC_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVC_IRQn 0 */
|
||||
/* USER CODE BEGIN SVC_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVC_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32F0xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32f0xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,296 @@
|
|||
#include "stm32f0xx_system.h"
|
||||
|
||||
ADC_HandleTypeDef hadc;
|
||||
TIM_HandleTypeDef htim6;
|
||||
UART_HandleTypeDef huart1;
|
||||
|
||||
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
while (1)
|
||||
{}
|
||||
}
|
||||
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
HAL_IncTick();
|
||||
HAL_SYSTICK_IRQHandler();
|
||||
}
|
||||
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||
|
||||
// Initializes the CPU, AHB and APB busses clocks
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI14 | RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.HSI14State = RCC_HSI14_ON;
|
||||
RCC_OscInitStruct.HSI14CalibrationValue = 16;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
|
||||
RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1;
|
||||
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
// Initializes the CPU, AHB and APB busses clocks
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1;
|
||||
PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK1;
|
||||
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
void Error_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
|
||||
void MX_ADC_Init(void)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig = {0};
|
||||
|
||||
// Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
hadc.Instance = ADC1;
|
||||
hadc.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
|
||||
hadc.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
|
||||
hadc.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
hadc.Init.LowPowerAutoWait = DISABLE;
|
||||
hadc.Init.LowPowerAutoPowerOff = DISABLE;
|
||||
hadc.Init.ContinuousConvMode = DISABLE;
|
||||
hadc.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||
hadc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||
hadc.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc.Init.Overrun = ADC_OVR_DATA_PRESERVED;
|
||||
|
||||
if (HAL_ADC_Init(&hadc) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
// Configure for the selected ADC regular channel to be converted.
|
||||
sConfig.Channel = ADC_CHANNEL_8;
|
||||
sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
|
||||
|
||||
if (HAL_ADC_ConfigChannel(&hadc, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if (adcHandle->Instance==ADC1)
|
||||
{
|
||||
__HAL_RCC_ADC1_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
|
||||
// ADC GPIO Configuration
|
||||
// PB0 ------> ADC_IN8
|
||||
GPIO_InitStruct.Pin = TARGET_VOLTAGE_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(TARGET_VOLTAGE_GPIO_Port, &GPIO_InitStruct);
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
|
||||
{
|
||||
if (adcHandle->Instance==ADC1)
|
||||
{
|
||||
__HAL_RCC_ADC1_CLK_DISABLE();
|
||||
|
||||
HAL_GPIO_DeInit(TARGET_VOLTAGE_GPIO_Port, TARGET_VOLTAGE_Pin);
|
||||
}
|
||||
}
|
||||
|
||||
void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
|
||||
// GPIO Ports Clock Enable
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
|
||||
// Configure GPIO pin Output Level
|
||||
HAL_GPIO_WritePin(GPIOC, BOARD_RESET_Pin | BOARD_RUN_Pin | SR_OE_Pin | SR_RST_Pin, GPIO_PIN_SET);
|
||||
|
||||
// Configure GPIO pin Output Level
|
||||
HAL_GPIO_WritePin(GPIOC, ROM_ACTIVE_Pin | SR_STRB_Pin | SR_DATA_Pin, GPIO_PIN_RESET);
|
||||
|
||||
// Configure GPIO pin Output Level
|
||||
HAL_GPIO_WritePin(GPIOA, D0_Pin | D1_Pin | D2_Pin | D3_Pin | D4_Pin | D5_Pin | D6_Pin | D7_Pin | SR_CLK_Pin, GPIO_PIN_RESET);
|
||||
|
||||
// Configure GPIO pin Output Level
|
||||
HAL_GPIO_WritePin(GPIOB, ROM_WE_Pin | ROM_OE_Pin | ROM_CE_Pin | DATA_ROM_CE_Pin | DATA_DIR_Pin, GPIO_PIN_RESET);
|
||||
|
||||
// Configure GPIO pins : PCPin PCPin PCPin
|
||||
GPIO_InitStruct.Pin = BOARD_RESET_Pin | BOARD_RUN_Pin | ROM_ACTIVE_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
// Configure GPIO pin : PtPin
|
||||
GPIO_InitStruct.Pin = BOARD_POWER_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(BOARD_POWER_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
// Configure GPIO pins : PAPin PAPin PAPin PAPin PAPin PAPin PAPin PAPin PAPin
|
||||
GPIO_InitStruct.Pin = D0_Pin | D1_Pin | D2_Pin | D3_Pin | D4_Pin | D5_Pin | D6_Pin | D7_Pin | SR_CLK_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
// Configure GPIO pin : PtPin
|
||||
GPIO_InitStruct.Pin = SR_DATAIN_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(SR_DATAIN_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
// Configure GPIO pins : PBPin PBPin PBPin PBPin PBPin
|
||||
GPIO_InitStruct.Pin = ROM_WE_Pin | ROM_OE_Pin | ROM_CE_Pin | DATA_ROM_CE_Pin | DATA_DIR_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
// Configure GPIO pins : PCPin PCPin PCPin PCPin
|
||||
GPIO_InitStruct.Pin = SR_OE_Pin | SR_RST_Pin | SR_STRB_Pin | SR_DATA_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
}
|
||||
|
||||
|
||||
void MX_TIM6_Init(void)
|
||||
{
|
||||
htim6.Instance = TIM6;
|
||||
htim6.Init.Prescaler = 47999;
|
||||
htim6.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim6.Init.Period = 100;
|
||||
htim6.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
|
||||
|
||||
if (HAL_TIM_Base_Init(&htim6) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
|
||||
{
|
||||
|
||||
if (tim_baseHandle->Instance==TIM6)
|
||||
{
|
||||
__HAL_RCC_TIM6_CLK_ENABLE();
|
||||
// TIM6 interrupt Init
|
||||
HAL_NVIC_SetPriority(TIM6_IRQn, 2, 0);
|
||||
HAL_NVIC_EnableIRQ(TIM6_IRQn);
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
|
||||
{
|
||||
|
||||
if (tim_baseHandle->Instance==TIM6)
|
||||
{
|
||||
__HAL_RCC_TIM6_CLK_DISABLE();
|
||||
// TIM6 interrupt Deinit
|
||||
HAL_NVIC_DisableIRQ(TIM6_IRQn);
|
||||
}
|
||||
}
|
||||
|
||||
void MX_USART1_UART_Init(void)
|
||||
{
|
||||
huart1.Instance = USART1;
|
||||
huart1.Init.BaudRate = 115200;
|
||||
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart1.Init.StopBits = UART_STOPBITS_1;
|
||||
huart1.Init.Parity = UART_PARITY_NONE;
|
||||
huart1.Init.Mode = UART_MODE_TX_RX;
|
||||
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
||||
huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
||||
|
||||
if (HAL_UART_Init(&huart1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if (uartHandle->Instance==USART1)
|
||||
{
|
||||
__HAL_RCC_USART1_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
|
||||
// USART1 GPIO Configuration
|
||||
// PA9 ------> USART1_TX
|
||||
// PA10 ------> USART1_RX
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_10;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF1_USART1;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
// USART1 interrupt Init
|
||||
HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(USART1_IRQn);
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
if (uartHandle->Instance==USART1)
|
||||
{
|
||||
__HAL_RCC_USART1_CLK_DISABLE();
|
||||
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9 | GPIO_PIN_10);
|
||||
HAL_NVIC_DisableIRQ(USART1_IRQn);
|
||||
}
|
||||
}
|
81
Src/tim.c
81
Src/tim.c
|
@ -1,81 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* File Name : TIM.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the TIM instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "tim.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
TIM_HandleTypeDef htim6;
|
||||
|
||||
/* TIM6 init function */
|
||||
void MX_TIM6_Init(void)
|
||||
{
|
||||
|
||||
htim6.Instance = TIM6;
|
||||
htim6.Init.Prescaler = 47999;
|
||||
htim6.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim6.Init.Period = 100;
|
||||
htim6.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
|
||||
if (HAL_TIM_Base_Init(&htim6) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
|
||||
{
|
||||
|
||||
if(tim_baseHandle->Instance==TIM6)
|
||||
{
|
||||
/* USER CODE BEGIN TIM6_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM6_MspInit 0 */
|
||||
/* TIM6 clock enable */
|
||||
__HAL_RCC_TIM6_CLK_ENABLE();
|
||||
/* USER CODE BEGIN TIM6_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM6_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
|
||||
{
|
||||
|
||||
if(tim_baseHandle->Instance==TIM6)
|
||||
{
|
||||
/* USER CODE BEGIN TIM6_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM6_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM6_CLK_DISABLE();
|
||||
/* USER CODE BEGIN TIM6_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM6_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,6 @@
|
|||
#include "timers.h"
|
||||
|
||||
void TIM6_IRQHandler(void)
|
||||
{
|
||||
HAL_TIM_IRQHandler(&htim6);
|
||||
}
|
106
Src/usart.c
106
Src/usart.c
|
@ -1,108 +1,6 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* File Name : USART.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the USART instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usart.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
UART_HandleTypeDef huart1;
|
||||
|
||||
/* USART1 init function */
|
||||
|
||||
void MX_USART1_UART_Init(void)
|
||||
void USART1_IRQHandler(void)
|
||||
{
|
||||
|
||||
huart1.Instance = USART1;
|
||||
huart1.Init.BaudRate = 115200;
|
||||
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart1.Init.StopBits = UART_STOPBITS_1;
|
||||
huart1.Init.Parity = UART_PARITY_NONE;
|
||||
huart1.Init.Mode = UART_MODE_TX_RX;
|
||||
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
||||
huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
||||
if (HAL_UART_Init(&huart1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
HAL_UART_IRQHandler(&huart1);
|
||||
}
|
||||
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(uartHandle->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART1_MspInit 0 */
|
||||
/* USART1 clock enable */
|
||||
__HAL_RCC_USART1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**USART1 GPIO Configuration
|
||||
PA9 ------> USART1_TX
|
||||
PA10 ------> USART1_RX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF1_USART1;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN USART1_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART1_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
if(uartHandle->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART1_CLK_DISABLE();
|
||||
|
||||
/**USART1 GPIO Configuration
|
||||
PA9 ------> USART1_TX
|
||||
PA10 ------> USART1_RX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
||||
|
||||
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART1_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
Loading…
Reference in New Issue