diff --git a/src/qt/locale/bitcoin_de.ts b/src/qt/locale/bitcoin_de.ts
index 84de80aff..7c8c4c2d6 100644
--- a/src/qt/locale/bitcoin_de.ts
+++ b/src/qt/locale/bitcoin_de.ts
@@ -2927,6 +2927,10 @@
Kommandozeilen- und JSON-RPC-Befehle annehmen
+
+
+ Wenn <category> nicht angegeben wird oder <category>=1, jegliche Debugginginformationen ausgeben.
+
Maximale Gesamtgebühr (in %s) in einer Börsentransaktion; wird dies zu niedrig gesetzten können große Transaktionen abgebrochen werden (Standard: %s)
@@ -2935,10 +2939,22 @@
Bitte korrigieren Sie die Datums- und Uhrzeiteinstellungen Ihres Computers, da Bitcoin Core ansonsten nicht ordnungsgemäß funktionieren wird.
+
+
+ Kürzungsmodus wurde kleiner als das Minimum in Höhe von %d MiB konfiguriert. Bitte verwenden Sie einen größeren Wert.
+
+
+
+ Speicherplatzanforderung durch kürzen (löschen) alter Blöcke reduzieren. Dieser Modus ist nicht mit -txindex und -rescan kompatibel. Warnung: Die Umkehr dieser Einstellung erfordert das erneute Herunterladen der gesamten Blockkette. (Standard: 0 = deaktiviert das Kürzen von Blöcken, >%u = Zielgröße in MiB, die für Blockdateien verwendet werden darf)
+
Fehler: Ein schwerer interner Fehler ist aufgetreten, siehe debug.log für Details.
+
+
+ Gebühr (in %s/kB), die von Ihnen gesendeten Transaktionen hinzugefügt wird (Standard: %s)
+
Kürze Blockspeicher...
@@ -2983,6 +2999,10 @@
Kann auf diesem Computer nicht an %s binden, da Bitcoin Core wahrscheinlich bereits gestartet wurde.
+
+
+ UPnP verwenden, um eine Portweiterleitung einzurichten (Standard: 1, wenn abgehört wird und -proxy nicht gesetzt ist)
+
Warnung: Es wurde eine ungewöhnlich hohe Anzahl Blöcke erzeugt, %d Blöcke wurden in den letzten %d Stunden empfangen (%d wurden erwartet).
@@ -3055,6 +3075,10 @@
Aktiviere das Veröffentlichen des Raw-Blocks in <address>
+
+
+ Aktiviere das Veröffentlichen der Roh-Transaktion in <address>
+
Fehler beim Initialisieren der Blockdatenbank
@@ -3135,6 +3159,10 @@
UPnP verwenden, um eine Portweiterleitung einzurichten (Standard: %u)
+
+
+ Der User Agent Kommentar (%s) enthält unsichere Zeichen.
+
Verifiziere Blöcke...
@@ -3191,6 +3219,10 @@
Befehl ausführen wenn ein relevanter Alarm empfangen wird oder wir einen wirklich langen Fork entdecken (%s im Befehl wird durch die Nachricht ersetzt)
+
+
+ Niedrigere Gebühren (in %s/Kb) als diese werden bei der Transaktionserstellung als gebührenfrei angesehen (Standard: %s)
+
Wenn -paytxfee nicht festgelegt wurde Gebühren einschließen, so dass mit der Bestätigung von Transaktionen im Schnitt innerhalb von n Blöcken begonnen wird (Standard: %u)
@@ -3467,6 +3499,10 @@
Lesen von wallet.dat fehlgeschlagen! Alle Schlüssel wurden korrekt gelesen, Transaktionsdaten bzw. Adressbucheinträge fehlen aber möglicherweise oder sind inkorrekt.
+
+
+ Niedrigere Gebühren (in %s/Kb) als diese werden bei der Transaktionserstellung als gebührenfrei angesehen (Standard: %s)
+
Legt fest, wie gründlich die Blockverifikation von -checkblocks ist (0-4, Standard: %u)
diff --git a/src/qt/locale/bitcoin_es.ts b/src/qt/locale/bitcoin_es.ts
index 936074210..feb572960 100644
--- a/src/qt/locale/bitcoin_es.ts
+++ b/src/qt/locale/bitcoin_es.ts
@@ -882,6 +882,10 @@
opciones de la consola de comandos
+
+
+ Opciones de interfaz de usuario:
+
Elegir directorio de datos al iniciar (predeterminado: %u)
@@ -898,7 +902,11 @@
Establecer los certificados raíz SSL para solicitudes de pago (predeterminado: -system-)
-
+
+
+ Resetear los cambios de configuracion hechos por el GUI
+
+
Intro
diff --git a/src/qt/locale/bitcoin_ro_RO.ts b/src/qt/locale/bitcoin_ro_RO.ts
index 8bccf037a..0b80667cf 100644
--- a/src/qt/locale/bitcoin_ro_RO.ts
+++ b/src/qt/locale/bitcoin_ro_RO.ts
@@ -222,7 +222,15 @@
BanTableModel
-
+
+
+ IP/Netmask
+
+
+
+ Banat până la
+
+
BitcoinGUI
@@ -874,6 +882,30 @@
Opţiuni linie de comandă
+
+
+ Opţiuni UI:
+
+
+
+ Alege dosarul de date la pornire (implicit: %u)
+
+
+
+ Setează limba, de exemplu: "ro_RO" (implicit: sistem local)
+
+
+
+ Porniţi minimizat
+
+
+
+ Setare rădăcină certificat SSL pentru cerere de plată (implicit: -sistem- )
+
+
+
+ Afişează ecran splash la pornire (implicit: %u)
+
Intro
@@ -1312,6 +1344,10 @@
Agent utilizator
+
+
+ Nod/Serviciu
+
Timp ping
diff --git a/src/qt/locale/bitcoin_zh_TW.ts b/src/qt/locale/bitcoin_zh_TW.ts
index 402609592..075410f96 100644
--- a/src/qt/locale/bitcoin_zh_TW.ts
+++ b/src/qt/locale/bitcoin_zh_TW.ts
@@ -7,7 +7,7 @@
- 新增新的位址
+ 產生一個新位址
@@ -169,7 +169,7 @@
- 位元幣核心現在要關閉,好完成加密程序。請注意,加密錢包不能完全防止入侵你的電腦的惡意程式偷取位元幣。
+ 比特幣核心現在要關閉,好完成加密程序。請注意,加密錢包不能完全防止入侵你的電腦的惡意程式偷取比特幣。
@@ -307,7 +307,7 @@
- 位元幣核心客戶端軟體
+ 比特幣核心客戶端軟體
@@ -319,7 +319,7 @@
- 付錢給一個位元幣位址
+ 付錢給一個比特幣位址
@@ -343,7 +343,7 @@
- 位元幣
+ 比特幣
@@ -359,7 +359,7 @@
- 顯示位元幣核心的相關資訊
+ 顯示比特幣核心的相關資訊
@@ -375,11 +375,11 @@
- 用位元幣位址簽署訊息來證明位址是你的
+ 用比特幣位址簽署訊息來證明位址是你的
- 驗證訊息是用來確定訊息是用指定的位元幣位址簽署的
+ 驗證訊息是用來確定訊息是用指定的比特幣位址簽署的
@@ -399,7 +399,7 @@
- 位元幣核心
+ 比特幣核心
@@ -407,11 +407,11 @@
- 關於位元幣核心
+ 關於比特幣核心
- 修改位元幣核心的設定選項
+ 修改比特幣核心的設定選項
@@ -431,11 +431,11 @@
- 顯示位元幣核心的說明訊息,來取得可用命令列選項的列表
+ 顯示比特幣核心的說明訊息,來取得可用命令列選項的列表
- %n 個運作中的位元幣網路連線
+ %n 個運作中的比特幣網路連線
@@ -856,7 +856,7 @@
HelpMessageDialog
- 位元幣核心
+ 比特幣核心
@@ -868,7 +868,7 @@
- 關於位元幣核心
+ 關於比特幣核心
@@ -919,15 +919,15 @@
- 歡迎使用位元幣核心
+ 歡迎使用比特幣核心
- 因為這是程式第一次啓動,你可以選擇位元幣核心儲存資料的地方。
+ 因為這是程式第一次啓動,你可以選擇比特幣核心儲存資料的地方。
- 位元幣核心會下載並儲存一份位元幣區塊鏈的拷貝。至少有 %1GB 的資料會儲存到這個目錄中,並且還會持續增長。另外錢包資料也會儲存在這個目錄。
+ 比特幣核心會下載並儲存一份比特幣區塊鏈的拷貝。至少有 %1GB 的資料會儲存到這個目錄中,並且還會持續增長。另外錢包資料也會儲存在這個目錄。
@@ -939,7 +939,7 @@
- 位元幣核心
+ 比特幣核心
@@ -1049,11 +1049,11 @@
- 在登入系統後自動啓動位元幣核心。
+ 在登入系統後自動啓動比特幣核心。
- 系統登入時啟動位元幣核心
+ 系統登入時啟動比特幣核心
@@ -1133,7 +1133,7 @@
- 用另外的 SOCKS5 代理伺服器,來透過 Tor 隱藏服務跟其他節點聯絡:
+ 用另外的 SOCKS5 代理伺服器,來透過洋蔥路由的隱藏服務跟其他節點聯絡:
@@ -1323,7 +1323,7 @@
- 沒辦法解析資源識別碼(URI)!可能是因為位元幣位址無效,或是 URI 參數格式錯誤。
+ 沒辦法解析資源識別碼(URI)!可能是因為比特幣位址無效,或是 URI 參數格式錯誤。
@@ -1397,7 +1397,7 @@
- 輸入位元幣位址 (比如說 %1)
+ 輸入比特幣位址 (比如說 %1)
@@ -1679,7 +1679,7 @@
- 歡迎使用位元幣核心 RPC 主控台。
+ 歡迎使用比特幣核心 RPC 主控台。
@@ -2155,7 +2155,7 @@
- 警告: 位元幣位址無效
+ 警告: 比特幣位址無效
@@ -2206,7 +2206,7 @@
- 接收付款的位元幣位址
+ 接收付款的比特幣位址
@@ -2250,7 +2250,7 @@
- 附加在位元幣付款協議的資源識別碼(URI)中的訊息,會和交易內容一起存起來,給你自己做參考。注意: 這個訊息不會送到位元幣網路上。
+ 附加在比特幣付款協議的資源識別碼(URI)中的訊息,會和交易內容一起存起來,給你自己做參考。注意: 這個訊息不會送到比特幣網路上。
@@ -2265,7 +2265,7 @@
ShutdownWindow
- 正在關閉位元幣核心中...
+ 正在關閉比特幣核心中...
@@ -2320,7 +2320,7 @@
- 簽署這個訊息來證明這個位元幣位址是你的
+ 簽署這個訊息來證明這個比特幣位址是你的
@@ -2344,11 +2344,11 @@
- 簽署這個訊息的位元幣位址
+ 簽署這個訊息的比特幣位址
- 驗證這個訊息來確定是用指定的位元幣位址簽署的
+ 驗證這個訊息來確定是用指定的比特幣位址簽署的
@@ -2415,11 +2415,11 @@
SplashScreen
- 位元幣核心
+ 比特幣核心
- 位元幣核心開發人員
+ 比特幣核心開發人員
@@ -2938,7 +2938,7 @@
- 請檢查電腦日期和時間是否正確!位元幣核心沒辦法在時鐘不準的情況下正常運作。
+ 請檢查電腦日期和時間是否正確!比特幣核心沒辦法在時鐘不準的情況下正常運作。
@@ -2970,7 +2970,7 @@
- 用護靈模式在背後執行並接受指令
+ 在背景執行並接受指令
@@ -3026,7 +3026,7 @@
- 警告: 位元幣網路對於區塊鏈結的決定目前有分歧!看來有些礦工會有問題。
+ 警告: 比特幣網路對於區塊鏈結的決定目前有分歧!看來有些礦工會有問題。
@@ -3218,7 +3218,7 @@
- 沒辦法鎖定資料目錄 %s。位元幣核心可能已經在執行了。
+ 沒辦法鎖定資料目錄 %s。比特幣核心可能已經在執行了。
@@ -3306,7 +3306,7 @@
- 自動產生 Tor 隱藏服務(預設值: %d)
+ 自動產生洋蔥路由的隱藏服務(預設值: %d)
@@ -3318,11 +3318,11 @@
- 版權為位元幣核心開發人員自西元 2009 至 %i 年起所有
+ 版權為比特幣核心開發人員自西元 2009 至 %i 年起所有
- 載入 wallet.dat 檔案時發生錯誤: 這個錢包需要新版的位元幣核心
+ 載入 wallet.dat 檔案時發生錯誤: 這個錢包需要新版的比特幣核心
@@ -3422,11 +3422,11 @@
- Tor 控制埠密碼(預設值: 空白)
+ 洋蔥路由控制埠密碼(預設值: 空白)
- 開啟聽候 onion 連線時的 Tor 控制埠號碼(預設值: %s)
+ 開啟聽候 onion 連線時的洋蔥路由控制埠號碼(預設值: %s)
@@ -3458,7 +3458,7 @@
- 錢包需要重寫: 請重新啓動位元幣核心來完成
+ 錢包需要重寫: 請重新啓動比特幣核心來完成
@@ -3582,7 +3582,7 @@
- 生產位元幣(預設值: %u)
+ 生產比特幣(預設值: %u)