trivial: Merge pruning help message after Transifex comment

The prune help message was broken in nonsensical parts. Merge it into
one, this is easier for translators.

Reported by yahoe.001 on transifex.
This commit is contained in:
Wladimir J. van der Laan 2015-05-04 18:46:33 +02:00
parent 3e2559c7c7
commit fc44231cb7
No known key found for this signature in database
GPG Key ID: 74810B012346C9A6
3 changed files with 46 additions and 65 deletions

View File

@ -275,11 +275,9 @@ std::string HelpMessage(HelpMessageMode mode)
#ifndef WIN32
strUsage += HelpMessageOpt("-pid=<file>", strprintf(_("Specify pid file (default: %s)"), "bitcoind.pid"));
#endif
strUsage += HelpMessageOpt("-prune=<n>", _("Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex.") + " " +
_("Warning: Reverting this setting requires re-downloading the entire blockchain.") + " " +
_("(default: 0 = disable pruning blocks,") + " " +
strprintf(_(">%u = target size in MiB to use for block files)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024));
strUsage += HelpMessageOpt("-reindex", _("Rebuild block chain index from current blk000??.dat files") + " " + _("on startup"));
strUsage += HelpMessageOpt("-prune=<n>", strprintf(_("Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex. "
"Warning: Reverting this setting requires re-downloading the entire blockchain. "
"(default: 0 = disable pruning blocks, >%u = target size in MiB to use for block files)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024));
#if !defined(WIN32)
strUsage += HelpMessageOpt("-sysperms", _("Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)"));

View File

@ -109,7 +109,10 @@ QT_TRANSLATE_NOOP("bitcoin-core", ""
"isolation (default: %u)"),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Reduce storage requirements by pruning (deleting) old blocks. This mode "
"disables wallet support and is incompatible with -txindex."),
"disables wallet support and is incompatible with -txindex. Warning: "
"Reverting this setting requires re-downloading the entire blockchain. "
"(default: 0 = disable pruning blocks, >%u = target size in MiB to use for "
"block files)"),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Require high priority for relaying free or low-fee transactions (default: %u)"),
QT_TRANSLATE_NOOP("bitcoin-core", ""
@ -158,9 +161,6 @@ QT_TRANSLATE_NOOP("bitcoin-core", ""
"Warning: Please check that your computer's date and time are correct! If "
"your clock is wrong Bitcoin Core will not work properly."),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Warning: Reverting this setting requires re-downloading the entire "
"blockchain."),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Warning: The network does not appear to fully agree! Some miners appear to "
"be experiencing issues."),
QT_TRANSLATE_NOOP("bitcoin-core", ""
@ -184,14 +184,13 @@ QT_TRANSLATE_NOOP("bitcoin-core", ""
"mode. This will redownload the entire blockchain"),
QT_TRANSLATE_NOOP("bitcoin-core", "(default: %s)"),
QT_TRANSLATE_NOOP("bitcoin-core", "(default: %u)"),
QT_TRANSLATE_NOOP("bitcoin-core", "(default: 0 = disable pruning blocks,"),
QT_TRANSLATE_NOOP("bitcoin-core", "(default: 1)"),
QT_TRANSLATE_NOOP("bitcoin-core", "<category> can be:"),
QT_TRANSLATE_NOOP("bitcoin-core", ">%u = target size in MiB to use for block files)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Accept command line and JSON-RPC commands"),
QT_TRANSLATE_NOOP("bitcoin-core", "Accept connections from outside (default: 1 if no -proxy or -connect)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Accept public REST requests (default: %u)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Acceptable ciphers (default: %s)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Activating best chain..."),
QT_TRANSLATE_NOOP("bitcoin-core", "Add a node to connect to and attempt to keep the connection open"),
QT_TRANSLATE_NOOP("bitcoin-core", "Allow DNS lookups for -addnode, -seednode and -connect"),
QT_TRANSLATE_NOOP("bitcoin-core", "Allow self signed root certificates (default: 0)"),
@ -276,7 +275,6 @@ QT_TRANSLATE_NOOP("bitcoin-core", "RPC server options:"),
QT_TRANSLATE_NOOP("bitcoin-core", "RPC support for HTTP persistent connections (default: %d)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Randomly drop 1 of every <n> network messages"),
QT_TRANSLATE_NOOP("bitcoin-core", "Randomly fuzz 1 of every <n> network messages"),
QT_TRANSLATE_NOOP("bitcoin-core", "Rebuild block chain index from current blk000??.dat files"),
QT_TRANSLATE_NOOP("bitcoin-core", "Relay and mine data carrier transactions (default: %u)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Relay non-P2SH multisig (default: %u)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Rescan the block chain for missing wallet transactions"),

View File

@ -3584,22 +3584,22 @@
<context>
<name>bitcoin-core</name>
<message>
<location filename="../bitcoinstrings.cpp" line="+269"/>
<location filename="../bitcoinstrings.cpp" line="+268"/>
<source>Options:</source>
<translation>Options:</translation>
</message>
<message>
<location line="+35"/>
<location line="+34"/>
<source>Specify data directory</source>
<translation>Specify data directory</translation>
</message>
<message>
<location line="-94"/>
<location line="-93"/>
<source>Connect to a node to retrieve peer addresses, and disconnect</source>
<translation>Connect to a node to retrieve peer addresses, and disconnect</translation>
</message>
<message>
<location line="+97"/>
<location line="+96"/>
<source>Specify your own public address</source>
<translation>Specify your own public address</translation>
</message>
@ -3624,7 +3624,7 @@
<translation>Accept connections from outside (default: 1 if no -proxy or -connect)</translation>
</message>
<message>
<location line="-170"/>
<location line="-168"/>
<source>Bind to given address and always listen on it. Use [host]:port notation for IPv6</source>
<translation>Bind to given address and always listen on it. Use [host]:port notation for IPv6</translation>
</message>
@ -3664,7 +3664,12 @@
<translation type="unfinished"></translation>
</message>
<message>
<location line="+22"/>
<location line="+15"/>
<source>Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, &gt;%u = target size in MiB to use for block files)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+10"/>
<source>Set the number of script verification threads (%u to %d, 0 = auto, &lt;0 = leave that many cores free, default: %d)</source>
<translation type="unfinished"></translation>
</message>
@ -3684,7 +3689,7 @@
<translation>Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.</translation>
</message>
<message>
<location line="+9"/>
<location line="+6"/>
<source>Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.</source>
<translation>Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.</translation>
</message>
@ -3709,7 +3714,7 @@
<translation type="unfinished"></translation>
</message>
<message>
<location line="+12"/>
<location line="+11"/>
<source>(default: 1)</source>
<translation type="unfinished"></translation>
</message>
@ -3834,12 +3839,7 @@
<translation type="unfinished"></translation>
</message>
<message>
<location line="+6"/>
<source>Rebuild block chain index from current blk000??.dat files</source>
<translation>Rebuild block chain index from current blk000??.dat files</translation>
</message>
<message>
<location line="+12"/>
<location line="+17"/>
<source>Set database cache size in megabytes (%d to %d, default: %d)</source>
<translation type="unfinished"></translation>
</message>
@ -3894,12 +3894,12 @@
<translation>You need to rebuild the database using -reindex to change -txindex</translation>
</message>
<message>
<location line="-99"/>
<location line="-98"/>
<source>Imports blocks from external blk000??.dat file</source>
<translation>Imports blocks from external blk000??.dat file</translation>
</message>
<message>
<location line="-224"/>
<location line="-223"/>
<source>Allow JSON-RPC connections from specified source. Valid for &lt;ip&gt; are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times</source>
<translation type="unfinished"></translation>
</message>
@ -3989,12 +3989,7 @@
<translation type="unfinished"></translation>
</message>
<message>
<location line="+3"/>
<source>Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+3"/>
<location line="+9"/>
<source>Require high priority for relaying free or low-fee transactions (default: %u)</source>
<translation type="unfinished"></translation>
</message>
@ -4043,11 +4038,6 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
<source>Warning: Please check that your computer&apos;s date and time are correct! If your clock is wrong Bitcoin Core will not work properly.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+3"/>
<source>Warning: Reverting this setting requires re-downloading the entire blockchain.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+19"/>
<source>Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway</source>
@ -4064,22 +4054,17 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
<translation type="unfinished"></translation>
</message>
<message>
<location line="+1"/>
<source>(default: 0 = disable pruning blocks,</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+3"/>
<source>&gt;%u = target size in MiB to use for block files)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+3"/>
<location line="+5"/>
<source>Accept public REST requests (default: %u)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+4"/>
<location line="+2"/>
<source>Activating best chain...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+3"/>
<source>Allow self signed root certificates (default: 0)</source>
<translation type="unfinished"></translation>
</message>
@ -4209,7 +4194,7 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
<translation type="unfinished"></translation>
</message>
<message>
<location line="+8"/>
<location line="+7"/>
<source>Send trace/debug info to console instead of debug.log file</source>
<translation>Send trace/debug info to console instead of debug.log file</translation>
</message>
@ -4339,17 +4324,17 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
<translation>wallet.dat corrupt, salvage failed</translation>
</message>
<message>
<location line="-71"/>
<location line="-70"/>
<source>Password for JSON-RPC connections</source>
<translation>Password for JSON-RPC connections</translation>
</message>
<message>
<location line="-206"/>
<location line="-205"/>
<source>Execute command when the best block changes (%s in cmd is replaced by block hash)</source>
<translation>Execute command when the best block changes (%s in cmd is replaced by block hash)</translation>
</message>
<message>
<location line="+259"/>
<location line="+257"/>
<source>Upgrade wallet to latest format</source>
<translation>Upgrade wallet to latest format</translation>
</message>
@ -4369,7 +4354,7 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
<translation>This help message</translation>
</message>
<message>
<location line="-116"/>
<location line="-115"/>
<source>Allow DNS lookups for -addnode, -seednode and -connect</source>
<translation>Allow DNS lookups for -addnode, -seednode and -connect</translation>
</message>
@ -4384,7 +4369,7 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
<translation>Error loading wallet.dat: Wallet corrupted</translation>
</message>
<message>
<location line="-212"/>
<location line="-211"/>
<source>(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)</source>
<translation type="unfinished"></translation>
</message>
@ -4419,22 +4404,22 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
<translation type="unfinished"></translation>
</message>
<message>
<location line="+48"/>
<location line="+51"/>
<source>Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+37"/>
<location line="+34"/>
<source>(default: %s)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+9"/>
<location line="+7"/>
<source>Acceptable ciphers (default: %s)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+4"/>
<location line="+5"/>
<source>Always query for peer addresses via DNS lookup (default: %u)</source>
<translation type="unfinished"></translation>
</message>
@ -4519,7 +4504,7 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
<translation type="unfinished"></translation>
</message>
<message>
<location line="+9"/>
<location line="+8"/>
<source>Relay and mine data carrier transactions (default: %u)</source>
<translation type="unfinished"></translation>
</message>
@ -4599,7 +4584,7 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
<translation>Unknown network specified in -onlynet: &apos;%s&apos;</translation>
</message>
<message>
<location line="-119"/>
<location line="-118"/>
<source>Cannot resolve -bind address: &apos;%s&apos;</source>
<translation>Cannot resolve -bind address: &apos;%s&apos;</translation>
</message>
@ -4644,12 +4629,12 @@ for example: alertnotify=echo %%s | mail -s &quot;Bitcoin Alert&quot; admin@foo.
<translation>Cannot write default address</translation>
</message>
<message>
<location line="+77"/>
<location line="+76"/>
<source>Rescanning...</source>
<translation>Rescanning...</translation>
</message>
<message>
<location line="-64"/>
<location line="-63"/>
<source>Done loading</source>
<translation>Done loading</translation>
</message>