These add very simple sanity checks to ensure that the build/host toolchains
have not changed since the last run. If they have, all ids will change and
packages will be rebuilt.
For more complicated usage (like parsing dpkg), HOST_ID_SALT/BUILD_ID_SALT may
be used to introduce arbitrary data to the ids.
2016/01/24:
Change miniwget to return HTTP status code
Increments API_VERSION to 16
2016/01/22:
Improve UPNPIGD_IsConnected() to check if WAN address is not private.
Parse HTTP response status line in miniwget.c
149641e Travis: Use Blue Box VMs for IPv6 loopback support (Luke Dashjr)
c01f08d Bugfix: depends/Travis: Use --location (follow redirects) and --fail [on HTTP error response] with curl (Luke Dashjr)
5d1148c Travis: Use curl rather than wget for Mac SDK (Luke Dashjr)
1ecbb3b depends: Use curl for fetching on Linux (Luke Dashjr)
Currently Travis's wget fails fetching qrencode:
Fetching qrencode...
ERROR: no certificate subject alternative name matches
requested host name `fukuchi.org'.
To connect to fukuchi.org insecurely, use `--no-check-certificate'.
OpenSSL: error:14077438:SSL routines:SSL23_GET_SERVER_HELLO:tlsv1 alert internal error
Unable to establish SSL connection.
make: *** [/home/travis/build/luke-jr/bitcoin/depends/sources/download-stamps/.stamp_fetched-qrencode-qrencode-3.4.4.tar.bz2.hash] Error 4
Remove sed-based qt PIDLIST_ABSOLUTE workaround, replace by a patch that
works for both old (such as used by Travis and Ubuntu Precise) and new
mingw (Ubuntu Trusty).
This passes `-Wa,--noexecstack` to the assembler when building
platform-specific assembly files, to signal that a non-executable stack
can be used. This is the same approach as used by Debian
(see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=430583)
This version of miniupnpc fixes a buffer overflow in the XML (ugh)
parser during initial network discovery.
http://talosintel.com/reports/TALOS-2015-0035/
The commit fixing the vulnerability is:
79cca974a4
Reported by timothy on IRC.
This should fix the spurious comparison tool failures.
See discussion here: https://github.com/bitcoin/bitcoin/pull/6305
The race fix was cherry-picked on top of the version we're currently using, so
it should be functionally identical otherwise.
This should be functionally identical to what's in place now. It was built from
be0eef7744
That commit is the same as this pruned commit in TheBlueMatt's repo:
https://github.com/TheBlueMatt/bitcoinj/commit/0f7b5d8
Now we'll be able to trust the line numbers in the stack traces.
Boost assumes variadic templates are always available in GCC 4.4+, but
they aren't since we don't build with -std=c++11.
This applies the patch that fixed the issue in boost 1.57:
eec8085549
See also: https://svn.boost.org/trac/boost/ticket/10500
Documentation more readable when viewed on Github.
Some extra changes by @laanwj:
- Make README.usage the default README. This is more convenient from a
user perspective. Link to other documentation in this default README
- Add list of popular targets for cross compilation, change default to
Win64 instead of Win32
In some cases (Travis), sources and build caches may be moved around in-between
builds, and we can't necessarily trust that everything is still intact.
This introduces pre-build checks that verify against stashed checksums.
Note that this will cause all sources to be re-downloaded, since cached sources
weren't trustworthy before this.
See here for background: https://bugreports.qt.io/browse/QTBUG-34748
libxcb temporarily had an abi breakage which caused crashes when qt was
compiled against a non-compatible version. Building qt with -qt-xcb should have
shielded us from this issue, except that incompatible headers were used when
building qt's wrapper.
Make sure those headers aren't picked up by qt's build.
Details:
qt's build adds a wrapper around the xcb libs when -qt-xcb is used. This is
done to avoid having to link to a handful of different libs, which may not be
api/abi stable. This build depends on include-order, so that its files are
found before the real libxcb headers.
Our build (for other reasons related to qt's complicated build-system) injects
our prefix into CXXFLAGS. Because libxcb is found in this path, that reverses
the include-order, negating the purpose of the wrapper.
To fix, libxcb's includes are simply moved to a subdir. pkg-config ensures that
they're still found properly when needed.
To make things even more interesting, this behavior in qt's .pro files is broken:
INCLUDEPATH += $$QMAKE_CFLAGS_XCB
The INCLUDEPATH variable is processed by qmake which automatically prefixes each
entry with "-I". The QMAKE_CFLAGS_XCB variable comes from pkg-config and
already contains -I, making the path look like "-I-I/path/to/xcb/headers".
To work around that, CFLAGS/CXXFLAGS are used here rather than INCLUDEPATH.
tl;dr: Update to the newer stable toolchain and SDK for OSX without giving up
any backwards compatibility. We can move to clang 3.5 as a next step which
allows use to use libc++ and the 10.10 sdk, but we'll need to find a build that
works in gitian/travis first.
Switch to a new, better maintained fork of cctools:
https://github.com/tpoechtrager/cctools-port
I've forked this and will be working on it some as well:
https://github.com/theuni/cctools-port
This brings in:
cctools v862
ld64: v241.9
It also fixes 64bit builds, so there's no longer any need to use a 32bit clang.
Since clang is no longer tied to an old/crusty 32bit build, clang has been
upgraded to 3.3. Unfortunately, there's a bug in 3.4 that breaks builds. 3.5
works fine, but there are no binary builds compatible with precise, which is
currently used for gitian and travis. We could always build our own if
necessary.
After updating to stable clang/linker/cctools, it's possible to use a more
recent SDK. The current SDK (10.7) through the most recent 10.10 have all been
built/tested successfully, both with and without 10.6 compatibility. However,
10.10 requires clang 3.5.
SDKs >= 10.9 use libc++ rather than libstdc++. This is verified working as well.
Broken hash logic caused all depends on some platforms (osx at least) to end up
with the same build-id. Without this fix, nothing will be rebuilt when recipes
or dependencies change.
Since the last commit will force rebuilds of all depends, take the opportunity
to clean up a few other things that would trigger rebuilds as well.
- Move source stamps to the sources dir so that SOURCES_PATH is respected for
"make download".
- Only print "fetching..." when actually downloading a file.
- Avoid using non-deterministic paths for the recipe hash (patch location).
This should ensure that all builders get the same resulting build-ids.
- Use a per-package source paths. This will allow for removing old source files
in the future.
- Use a host-agnostic path for downloads which gets cleaned up properly.
Fixes default hidden symbol visibility for our linux->osx cross build. Without
this change, the check for working -fvisibility=hidden fails, and all symbols
are visible by default.
Ugly as this is, it's just a simple find/replace to fix a bug in Qt's configure.
They assume in an "XPLATFORM_MAC" block that the builder is capable of running
osx programs. This should be "BUILD_ON_MAC" instead.
Descriptors now make use of the dependencies builder, so results are cached.
A very new version (>= e9741525c) of Gitian should be used in order to take
advantage of caching.
We're not ready to switch to a static qt5 for Linux yet due to missing plugin
support. This adds a recipe for building a shared qt4 that we build and link
against, but don't distribute.
make USE_LINUX_STATIC_QT5=1 can be used to build static qt5 as before.
tl;dr: This solves boost visibility problems for default/release build configs
on non-Linux platforms.
When Bitcoin builds against boost's header-only classes, it ends up with
objects containing symbols that the upstream boost libs also have. Since
Bitcoin builds by default with hidden symbol visibility, it can end up trying
to link against a copy of the same symbols with default visibility.
This is not a problem on Linux because 3rd party static libs are un-exported
by default (--exclude-libs,ALL), but that is not available for MinGW and OSX.
Those platforms (and maybe others?) end up confused about which version to use.
The OSX linker spews hundreds of: "ld: warning: direct access in <foo> to
global weak symbol guard variable for <bar> means the weak symbol cannot be
overridden at runtime. This was likely caused by different translation units
being compiled with different visibility settings."
MinGW's linker complains similarly.
Since the default symbol visibility for Bitcoin is hidden and releases are
built that way as well, build Boost with hidden visibility. Linux builds Boost
this way also, but only for the sake of continuity.
This means that the linker confusion logic is reversed, so the problem will
will now be encountered if Bitcoin is built with --disable-reduce-exports, but
that's better than the current situation.
Bumps the OpenSSL version to the latest release, and kills SSL2. (SSL3 was already killed here, so I'm not sure why SSL2 was left around?)
No other changes.
0b17964 Bugfix: Replace bashisms with standard sh in tests/tools (Luke Dashjr)
ab72068 Bugfix: Replace bashisms with standard sh in gitian descriptors (Luke Dashjr)
b77b4ed Bugfix: Replace bashisms with standard sh to fix build on non-BASH systems (Luke Dashjr)
d6b0539 travis: add non-default shell testing to travis. (Cory Fields)
Newer mingw supports the features necessary to enable this api, whereas older
versions didn't. However once enabled (automatically by configure), it triggers
an unrelated build bug.
Since it was not enabled previously anyway, and we don't depend on the
functionality, just disable it across the board.
Cory Fields
Wladimir J. van der Laan
fanquake
MarcoFalke
Luke Dashjr
daniel
Chris Kleeschulte
Jonas Schnelli
Veres Lajos
Jacob Welsh
Shawn Wilkinson
BtcDrak
Pieter Wuille
Dominyk Tiller
Matt Corallo