Commit Graph

387 Commits

Author SHA1 Message Date
Wladimir J. van der Laan d93fa261f0
Merge #11490: Disconnect from outbound peers with bad headers chains
e065249 Add unit test for outbound peer eviction (Suhas Daftuar)
5a6d00c Permit disconnection of outbound peers on bad/slow chains (Suhas Daftuar)
c60fd71 Disconnecting from bad outbound peers in IBD (Suhas Daftuar)

Pull request description:

  The first commit will disconnect an outbound peer that serves us a headers chain with insufficient work while we're in IBD.

  The second commit introduces a way to disconnect outbound peers whose chains fall out of sync with ours:

  For a given outbound peer, we check whether their best known block (which is known from the blocks they announce to us) has at least as much work as our tip.  If it doesn't, we set a 20 minute timeout, and if we still haven't heard about a block with as much work as our tip had when we set the timeout, then we send a single getheaders message, and wait 2 more minutes.  If after two minutes their best known block has insufficient work, we disconnect that peer.

  We protect 4 of our outbound peers (who provide some "good" headers chains, ie a chain with at least as much work as our tip at some point) from being subject to this logic, to prevent excessive network topology changes as a result of this algorithm, while still ensuring that we have a reasonable number of nodes not known to be on bogus chains.

  We also don't require our peers to be on the same chain as us, to prevent accidental partitioning of the network in the event of a chain split.  Note that if our peers are ever on a more work chain than our tip, then we will download and validate it, and then either reorg to it, or learn of a consensus incompatibility with that peer and disconnect.  This PR is designed to protect against peers that are on a less work chain which we may never try to download and validate.

Tree-SHA512: 2e0169a1dd8a7fb95980573ac4a201924bffdd724c19afcab5efcef076fdbe1f2cec7dc5f5d7e0a6327216f56d3828884f73642e00c8534b56ec2bb4c854a656
2017-10-26 21:53:41 +02:00
Suhas Daftuar c60fd71a65 Disconnecting from bad outbound peers in IBD
When in IBD, we'd like to use all our outbound peers to help us
sync the chain.  Disconnect any outbound peers whose headers have
insufficient work.
2017-10-26 13:43:53 -04:00
MarcoFalke 57ee73990f
Merge #11538: qa: Fix race condition failures in replace-by-fee.py, sendheaders.py
6d51eaefe qa: Fix race condition in sendheaders.py (Suhas Daftuar)
c96b2e4f0 qa: Fix replace-by-fee race condition failures (Suhas Daftuar)

Pull request description:

  I think #11407 broke replace-by-fee by introducing a race condition.  I was observing frequent failures of replace-by-fee locally, always with a mempool sync failure (the sync call was added in #11407).

  It appeared to me like there were two causes: sometimes the node would be in IBD and not request the transaction that was relayed; other times the blocks generated in make_utxo wouldn't have relayed quickly enough for the spend of the transaction to be accepted.  I believe I've fixed both potential errors.

  ping @instagibbs

  Edit: I found a race condition in the sendheaders.py test, where if the verack from the python node wasn't processed before the first block in the test was generated, then no block announcement would go out to that peer, breaking the test.  Fixed by adding a sync_with_ping after waiting for verack.

Tree-SHA512: 6ad160966e432c151c1ce6e88ae67e60e47123523bda3755cf7697a00e1a5ba38de8561751826e3d7cf0e492f8c2aec298e1b4de8424ebbaf497f099a1ef1d07
2017-10-23 17:19:26 +02:00
Suhas Daftuar 6d51eaefe9 qa: Fix race condition in sendheaders.py 2017-10-23 08:55:21 -04:00
Suhas Daftuar c96b2e4f09 qa: Fix replace-by-fee race condition failures 2017-10-20 16:10:12 -04:00
Suhas Daftuar 08fd822771 qa: add test for minchainwork use in acceptblock 2017-10-19 20:38:22 -04:00
Russell Yanofsky 478a89c1ef Avoid opening copied wallet databases simultaneously
Make sure wallet databases have unique fileids. If they don't, throw an error.
BDB caches do not work properly when more than one open database has the same
fileid, because values written to one database may show up in reads to other
databases.

Bitcoin will never create different databases with the same fileid, but users
can create them by manually copying database files.

BDB caching bug was reported by Chris Moore <dooglus@gmail.com>
https://github.com/bitcoin/bitcoin/issues/11429

Fixes #11429
2017-10-19 09:01:43 -04:00
Wladimir J. van der Laan 02ac8c892b
Merge #11452: Improve ZMQ functional test
cc9ee80 Improve ZMQ functional test (João Barbosa)

Pull request description:

  After #11439, this PR only improves:
   - test comments;
   - simplicity by removing *duplicate* tests;
   - also removes duplicate code.

Tree-SHA512: 3636fa9694c827128128742ad31e635d19670c3645aef8e7b1cb46069c21631e8b0db059486a6f6e7eee237a23d93bce6df95190394b5a8dcfce31a49a72d17f
2017-10-18 19:00:05 +02:00
Wladimir J. van der Laan 6759a24eaa
Merge #11472: qa: Make tmpdir option an absolute path, misc cleanup
fafa003 qa: Remove never used return value of sync_with_ping (MarcoFalke)
fa9de37 qa: Make tmpdir option an absolute path (MarcoFalke)

Pull request description:

  This should fix issues with the multiwallet test and its symlinks
  when the tmpdir is a relative path.

  Rather than fixing os.symlink to work with paths relative to a
  directory descriptor, which does not work on Windows, normalize
  the path instead.

Tree-SHA512: 189690f3d065ea2f0f48e06775c86d513d0916c7c86312432e8e16df160e65539e288c2bd53d49a4180735fa940f6fcd52b506ccd7d9815651a9b1a69850dda6
2017-10-18 16:52:48 +02:00
Wladimir J. van der Laan 2ca518deff
Merge #11486: [tests] Add uacomment tests
c5dfa90 [tests] Add uacomment tests (Cristian Mircea Messel)

Pull request description:

  Checks for setting the value, max length and reserved characters

Tree-SHA512: a62e2cf8e455a3cd3987c0855f7bfc49de47504c01263e3573366e3cbff400c5678224773d4f1e4ac684fff34d987994e490a0978c4da05ff2a4bfa972c84723
2017-10-18 15:49:37 +02:00
MarcoFalke 808c84f89d
Merge #11483: Fix importmulti bug when importing an already imported key
a44a21517 Fix importmulti bug when importing an already imported key (Pedro Branco)

Pull request description:

  This PR fixes a bug in `importmulti` RPC call where it returns an invalid response when importing an already imported key.

  Before:
  ```sh
  ❯ bitcoin-cli -regtest importmulti '[{ "keys": ["cNcMUunXhVK1dXJ5riixtpYSxPXZnUAMGS4vpzwChdKmYY3Rz99v"], "scriptPubKey": { "address": "n4YZAf4WE2XF3t4BfeYS2nHAhb8CVx91BR" }, "timestamp": 1507655239 }]'
  [{ "success": true }]

  ❯ bitcoin-cli -regtest importmulti '[{ "keys": ["cNcMUunXhVK1dXJ5riixtpYSxPXZnUAMGS4vpzwChdKmYY3Rz99v"], "scriptPubKey": { "address": "n4YZAf4WE2XF3t4BfeYS2nHAhb8CVx91BR" }, "timestamp": 1507655239 }]' '{ "rescan": false }'
  [ false ]

  ❯ bitcoin-cli -regtest importmulti '[{ "keys": ["cNcMUunXhVK1dXJ5riixtpYSxPXZnUAMGS4vpzwChdKmYY3Rz99v"], "scriptPubKey": { "address": "n4YZAf4WE2XF3t4BfeYS2nHAhb8CVx91BR" }, "timestamp": 1507655239 }]' '{ "rescan": true }'
  error code: -1
  error message:
  JSON value is not a boolean as expected
  ```

  After this fix:
  ```sh
  ❯ bitcoin-cli -rpcuser=u -rpcpassword=p -regtest importmulti '[{ "keys": ["cNcMUunXhVK1dXJ5riixtpYSxPXZnUAMGS4vpzwChdKmYY3Rz99v"], "scriptPubKey": { "address": "n4YZAf4WE2XF3t4BfeYS2nHAhb8CVx91BR" }, "timestamp": 1507655139 }]'
  [{ "success": true }]

  ❯ bitcoin-cli -rpcuser=u -rpcpassword=p -regtest importmulti '[{ "keys": ["cNcMUunXhVK1dXJ5riixtpYSxPXZnUAMGS4vpzwChdKmYY3Rz99v"], "scriptPubKey": { "address": "n4YZAf4WE2XF3t4BfeYS2nHAhb8CVx91BR" }, "timestamp": 1507655139 }]'
  [{ "success": false, "error": { "code": -4, "message": "The wallet already contains the private key for this address or script" } }]
  ```

Tree-SHA512: 4acebdfb7d0ebd7cd48e943b93ed1cec072db1ace5c42b3f5cc225603764b6e804e4b823b0710965826aafc2f0c615c53d5aefcfdb9bc9c379f5221b798a318c
2017-10-17 21:40:54 +02:00
John Newbery f893085325 [tests] Don't subclass from object for Python 3 2017-10-16 21:46:23 -04:00
John Newbery 8f9e3627ef [tests] authproxy.py: tidy up __init__() 2017-10-16 21:45:49 -04:00
John Newbery 323d8f61e9 [tests] fix flake8 warnings in authproxy.py 2017-10-16 21:45:49 -04:00
John Newbery fc0176d01e [tests] use python3 for authproxy.py 2017-10-16 21:45:49 -04:00
Jonas Schnelli 8c2de827e9
Merge #7061: [Wallet] Add RPC call "rescanblockchain <startheight> <stopheight>"
7a91ceb5e [QA] Add RPC based rescan test (Jonas Schnelli)
c77170fbd [Wallet] add rescanblockchain <start_height> <stop_height> RPC command (Jonas Schnelli)

Pull request description:

  A RPC rescan command is much more flexible for the following reasons:
  * You can define the start and end-height
  * It can be called during runtime
  * It can work in multiwallet environment

Tree-SHA512: df67177bad6ad1d08e5a621f095564524fa3eb87204c2048ef7265e77013e4b1b29f991708f807002329a507a254f35e79a4ed28a2d18d4b3da7a75d57ce0ea5
2017-10-13 15:23:22 -07:00
MarcoFalke fafa003970 qa: Remove never used return value of sync_with_ping 2017-10-13 15:29:18 +02:00
MarcoFalke fa9de370b1 qa: Make tmpdir option an absolute path
This should fix issues with the multiwallet test and symlinks
when the tmpdir is a relative path.

Rather than fixing os.symlink to work with paths relative to a
directory descriptor, which does not work on Windows, normalize
the path instead.
2017-10-13 15:28:56 +02:00
Jonas Schnelli 7a91ceb5e0
[QA] Add RPC based rescan test 2017-10-12 11:59:39 -07:00
Wladimir J. van der Laan f74459dba6
Merge #11277: Fix uninitialized URI in batch RPC requests
4526d21 Add test for multiwallet batch RPC calls (Russell Yanofsky)
74182f2 Add missing batch rpc calls to python coverage logs (Russell Yanofsky)
505530c Add missing multiwallet rpc calls to python coverage logs (Russell Yanofsky)
9f67646 Make AuthServiceProxy._batch method usable (Russell Yanofsky)
e02007a Limit AuthServiceProxyWrapper.__getattr__ wrapping (Russell Yanofsky)
edafc71 Fix uninitialized URI in batch RPC requests (Russell Yanofsky)

Pull request description:

  This fixes "Wallet file not specified" errors when making batch wallet RPC calls with more than one wallet loaded. This issue was reported by @NicolasDorier in https://github.com/bitcoin/bitcoin/issues/11257

  Request URI is not used for anything except multiwallet request dispatching, so this change has no other effect.

Tree-SHA512: b3907af48a6323f864bb045ee2fa56b604188b835025ef82ba3d81673244c04228d796323cec208a676e7cd578a95ec7c7ba1e84d0158b93844d5dda8f6589b9
2017-10-12 14:54:26 +02:00
Cristian Mircea Messel c5dfa90aab [tests] Add uacomment tests
Checks for setting the value, max length and reserved characters
2017-10-11 23:19:16 +03:00
Pedro Branco a44a215177 Fix importmulti bug when importing an already imported key 2017-10-11 17:20:42 +01:00
Wladimir J. van der Laan 364da2c529
Merge #10941: Add blocknotify and walletnotify functional tests
857b32b [tests] Add -walletnotify functional test (João Barbosa)
df18d29 [tests] Add -blocknotify functional test (João Barbosa)
9c72a46 [tests] Tidy up forknotify.py (John Newbery)

Pull request description:

  This patch adds the missing functional tests for `-blocknotify` and `-walletnotify` notifications. The `-alertnotify` test file `forknotify.py` is renamed to `notifications.py` to accommodate the new tests. Credits to @jnewbery for this cleanup and unification.

Tree-SHA512: ee7b28b9f1bd225587efaefa6427c6d080ccb50ead390b23d94717c137a317183b37be00da0b2bffedd4192a363c971dea510d78d29278eb9fa76374f7855c09
2017-10-11 11:26:10 +02:00
Wladimir J. van der Laan fef65c4f5e
Merge #11113: [net] Ignore getheaders requests for very old side blocks
eff4bd8 [test] P2P functional test for certain fingerprinting protections (Jim Posen)
a2be3b6 [net] Ignore getheaders requests for very old side blocks (Jim Posen)

Pull request description:

  Sending a getheaders message with an empty locator and a stop hash is a request for a single header by hash. The node will respond with headers for blocks not in the main chain as well as those in the main chain. To avoid fingerprinting, the node should, however, ignore requests for headers on side branches that are too old. This replicates the logic that currently exists for `getdata` requests for blocks.

Tree-SHA512: e04ef61e2b73945be6ec5977b3c5680b6dc3667246f8bfb67afae1ecaba900c0b49b18bbbb74869f7a37ef70b6ed99e78ebe0ea0a1569369fad9e447d720ffc4
2017-10-11 10:54:05 +02:00
João Barbosa cc9ee809ad Improve ZMQ functional test 2017-10-10 23:49:16 +01:00
João Barbosa 857b32b4b2 [tests] Add -walletnotify functional test 2017-10-10 23:46:13 +01:00
João Barbosa df18d29a02 [tests] Add -blocknotify functional test 2017-10-10 23:46:04 +01:00
John Newbery 9c72a464f8 [tests] Tidy up forknotify.py 2017-10-10 23:44:59 +01:00
MarcoFalke c63364610f
Merge #10853: [tests] Fix RPC failure testing (again)
47ba8cf71 scripted-diff: rename assert_raises_jsonrpc to assert_raises_rpc error (John Newbery)
677d893ff [tests] do not allow assert_raises_message to be called with JSONRPCException (John Newbery)
5864e9c16 [tests] remove direct testing on JSONRPCException from individual test cases (John Newbery)

Pull request description:

  I did this a few months ago (here: #9707), but a few new examples have crept back in.

  When testing RPC failures, the test case should always assert the error value and message, to ensure that the failure was for the correct reason. Not doing that can hide bugs in the test code and mean that the test is not testing the correct behaviour.

  RPC failure testing should use the utility function `assert_raises_jsonrpc()` (renamed in the final commit of this PR to `assert_raises_rpc_error()`.

  This PR does the following:
  - changes all remaining instances of tests directly testing on `JSONRPCException` to calls to `assert_raises_jsonrpc()`
  - prevents `assert_raises_message()` from being called with `JSONRPCException`
  - scripted-diff changes `assert_raises_jsonrpc()` to `assert_raises_rpc_error()`

Tree-SHA512: 2cc5e320704ec623a6e5a27d3c2c81cea86b502e29896f03bb5bf92cc36725132c1144410aecdf49e90d4577d512ee467d50d8184e9d5c5d0870bfc931316a5a
2017-10-09 21:00:04 +02:00
MarcoFalke 92eadc3950
Merge #11465: rpc: Update named args documentation for importprivkey
aa57590d7 Update importprivkey named args documentation (Dusty Williams)

Pull request description:

  Addresses issue #11462 by updating the documentation for the importprivkey arguments to the correct names, and updates the functional test importprunedfunds.py to use named arguments when calling importprivkey.

Tree-SHA512: 64e14bf89c8c6eec9c37f6ec0c9fc0012fdb035d9ec32cd652110c75abaa922ec5c7523d6ec5098c8a7b42124159b5e330e070974eb79b8b92816f8d61074523
2017-10-09 19:09:45 +02:00
Wladimir J. van der Laan 3a93270c55
Merge #11367: [rpc] getblockchaininfo: add size_on_disk, prune_target_size
b7dfc6c [rpc] getblockchaininfo: add size_on_disk, prune_target_size, automatic_pruning (Daniel Edgecumbe)

Pull request description:

Tree-SHA512: c255c27d6c922434d203ffdefda0dd3dddbd765b6a9cce5f80f5af5cb0b1c11c8aff6f4d00e96a326701d0bc81aace2f216fd1985675aa979f76c16f564a6cf6
2017-10-09 17:04:18 +02:00
Dusty Williams aa57590d7c Update importprivkey named args documentation
Fixes #11462. Updated documentation for importprivkey function to use the correct name for the first argument.
Also updates a call to importprivkey to use named args in functional test.
2017-10-09 07:40:42 -04:00
John Newbery 47ba8cf71e scripted-diff: rename assert_raises_jsonrpc to assert_raises_rpc error
-BEGIN VERIFY SCRIPT-
sed -i 's/assert_raises_jsonrpc/assert_raises_rpc_error/g' test/functional/*py test/functional/test_framework/*py
-END VERIFY SCRIPT-
2017-10-05 09:57:19 -04:00
John Newbery 677d893ff7 [tests] do not allow assert_raises_message to be called with JSONRPCException 2017-10-05 09:48:46 -04:00
John Newbery 5864e9c161 [tests] remove direct testing on JSONRPCException from individual test cases 2017-10-05 09:48:46 -04:00
Wladimir J. van der Laan 7f11ef2608
Merge #9937: rpc: Prevent `dumpwallet` from overwriting files
0cd9273 rpc: Prevent `dumpwallet` from overwriting files (Wladimir J. van der Laan)

Pull request description:

  Prevent arbitrary files from being overwritten by `dumpwallet`. There have been reports that users have overwritten wallet files this way. It may also avoid other security issues.

  Fixes #9934. Adds mention to release notes and adds a test.

Tree-SHA512: 268c98636d40924d793b55a685a0b419bafd834ad369edaec08227ebe26ed4470ddea73008d1c4beb10ea445db1b0bb8e3546ba8fc2d1a411ebd4a0de8ce9120
2017-10-04 15:01:24 +02:00
Russell Yanofsky 4526d21e52 Add test for multiwallet batch RPC calls
Tests bug reported in https://github.com/bitcoin/bitcoin/issues/11257
2017-10-04 03:07:01 -04:00
Russell Yanofsky 74182f235c Add missing batch rpc calls to python coverage logs
Without this change, batch RPC calls are not included in coverage logs.
2017-10-04 03:07:01 -04:00
Russell Yanofsky 505530c6cf Add missing multiwallet rpc calls to python coverage logs
This fixes a bug in coverage logging that's been around since the logging was
introduced.
2017-10-04 03:03:07 -04:00
Russell Yanofsky 9f67646f17 Make AuthServiceProxy._batch method usable
Split off AuthServiceProxy.get_request method to make it easier to batch RPC
requests without duplicating code and remove leading underscore from _batch
method.

This does not change any existing behavior.
2017-10-03 15:25:00 -04:00
Russell Yanofsky e02007aade Limit AuthServiceProxyWrapper.__getattr__ wrapping
Change AuthServiceProxyWrapper.__getattr__ to only wrap proxied attributes, not
real attributes. This way AuthServiceProxyWrapper can continue logging RPC
calls without complicating other object usages, and special case handling for
the .url property can be dropped.
2017-10-03 15:25:00 -04:00
Jim Posen eff4bd8ab2 [test] P2P functional test for certain fingerprinting protections 2017-10-03 10:28:00 -07:00
MarcoFalke 8ddf60db7a
Merge #11407: [tests] add functional test for mempoolreplacement command line arg
1088b5322 add functional test for mempoolreplacement command line arg (Gregory Sanders)

Pull request description:

  Currently untested.

Tree-SHA512: 2dd9d55a3499844e48b3774df9155fd650220b0761da45d16869570356bb0ed17a88d4efa4302a517dd96e1e9cb34113661b3c9df688736f6849201a3d544deb
2017-10-02 21:28:22 +02:00
Wladimir J. van der Laan 90926db238
Merge #11021: [rpc] fix getchaintxstats()
07704c1 Add some tests for getchaintxstats (Akio Nakamura)
3336676 Fix getchaintxstats() (Akio Nakamura)

Pull request description:

  1. calculate nblocks more adaptive.
    -> set default nblocks to min (blocks for 1 month, target block's height - 1)
    -> before PR: if not specify nblocks-parameter, illegal parameter error will happen when target block height is below nblocks.
  2. correct error message.
    -> nblocks accepts [1 .. block's height -1] . so add a word "-1".
  3. add check 0-divide.
    -> if nTimeDiff = 0 then use UniValue(UniValue::VNULL) and returns {... "txrate": null} .
    -> before PR: if nTimeDiff = 0 then returns {... "txrate":} and bitcoin-cli cannot handle the response.

Tree-SHA512: e1962ce7bb05a5bc7dec03eb04a8e7578f50fdb68927fcfc0a2232905ef4d679293eee148ebe0866682d209a8c458d21fbe71715e7311adb81f37089aae1ed93
2017-10-02 15:22:41 +02:00
Wladimir J. van der Laan 557aba6ce7
Merge #11399: Fix bip68-sequence rpc test
49f869f Fix bip68-sequence rpc test (Johnson Lau)

Pull request description:

  The test mined 1 extra block for the ACTIVE state. Test added to catch the right moment of LOCKED_IN->ACTIVE transaction

Tree-SHA512: a42477cf0b137e7e3b7c6c7b2530101cfad4e4f59866170b8fc0d655c43b3144aad6bca4287a4a8df4c28d7cf08d3f8df166975ad2e8dcb7d2cc15de60cf11cd
2017-10-02 14:48:59 +02:00
Daniel Edgecumbe b7dfc6c4b8 [rpc] getblockchaininfo: add size_on_disk, prune_target_size, automatic_pruning
Fix pruneheight help text.
Move fPruneMode block to match output ordering with help text.
Add functional tests for new fields in getblockchaininfo.
2017-09-29 19:40:50 +01:00
MarcoFalke ff4cd6075b
Merge #11319: [qa] Fix error introduced into p2p-segwit.py, and prevent future similar errors
f97ab35fa qa: Fix bug introduced in p2p-segwit.py (Suhas Daftuar)
a7820422e qa: Treat mininode p2p exceptions as fatal (Suhas Daftuar)

Pull request description:

  #11121 inadvertently broke the constructor for the `TestNode()` object in `p2p-segwit.py`, silently breaking at least one of the tests.

  Although the python code was raising exceptions due to a `TestNode()` object not existing (or having the right type), mininode was masking these from anyone running the test through the test_runner (like travis), because it catches all exceptions during message delivery and just prints a log message and continues.  Such "graceful" handling of errors is almost certainly something we don't want in our test suite, so the first commit here attempts to prevent that type of failure from ever being masked.

  The second commit fixes the particular bug in `p2p-segwit.py`.

Tree-SHA512: b6646e3cb1e05c35c28e8899c44104bf2e2d0384643ca87042ab7f6ec0960d89f5bf25a7b95bab6e32d401c20a6018226160500f6ddceb923e81ffb04adb4f2f
2017-09-29 20:23:59 +02:00
MarcoFalke 9c3c9cdae3
Merge #10552: [Test] Tests for zmqpubrawtx and zmqpubrawblock
d3677ab75 Tests for zmqpubrawtx and zmqpubrawblock (Andrew Chow)

Pull request description:

Tree-SHA512: 9e367fd8936514bfb567ef3f3d83770d374287354b59c9187e844056dd086e8aa2de32ce55d35486cecd706e7c93cd1c1e2709ee82d3dddb805827be8d2bcb14
2017-09-29 19:44:54 +02:00
Gregory Sanders 1088b5322d add functional test for mempoolreplacement command line arg 2017-09-29 11:29:38 -04:00
Wladimir J. van der Laan aa624b61c9
Merge #11167: Full BIP173 (Bech32) support
8213838 [Qt] tolerate BIP173/bech32 addresses during input validation (Jonas Schnelli)
06eaca6 [RPC] Wallet: test importing of native witness scripts (NicolasDorier)
fd0041a Use BIP173 addresses in segwit.py test (Pieter Wuille)
e278f12 Support BIP173 in addwitnessaddress (Pieter Wuille)
c091b99 Implement BIP173 addresses and tests (Pieter Wuille)
bd355b8 Add regtest testing to base58_tests (Pieter Wuille)
6565c55 Convert base58_tests from type/payload to scriptPubKey comparison (Pieter Wuille)
8fd2267 Import Bech32 C++ reference code & tests (Pieter Wuille)
1e46ebd Implement {Encode,Decode}Destination without CBitcoinAddress (Pieter Wuille)

Pull request description:

  Builds on top of #11117.

  This adds support for:
  * Creating BIP173 addresses for testing (through `addwitnessaddress`, though by default it still produces P2SH versions)
  * Sending to BIP173 addresses (including non-v0 ones)
  * Analysing BIP173 addresses (through `validateaddress`)

  It includes a reformatted version of the [C++ Bech32 reference code](https://github.com/sipa/bech32/tree/master/ref/c%2B%2B) and an independent implementation of the address encoding/decoding logic (integrated with CTxDestination). All BIP173 test vectors are included.

  Not included (and intended for other PRs):
  * Full wallet support for SegWit (which would include automatically adding witness scripts to the wallet during automatic keypool topup, SegWit change outputs, ...) [see #11403]
  * Splitting base58.cpp and tests/base58_tests.cpp up into base58-specific code, and "address encoding"-code [see #11372]
  * Error locating in UI for BIP173 addresses.

Tree-SHA512: 238031185fd07f3ac873c586043970cc2db91bf7735c3c168cb33a3db39a7bda81d4891b649685bb17ef90dc63af0328e7705d8cd3e8dafd6c4d3c08fb230341
2017-09-29 10:18:45 +02:00