Commit Graph

1199 Commits

Author SHA1 Message Date
paveljanik 5e151a842c PartitionCheck: remove useless spaces 2015-12-02 15:18:23 +01:00
paveljanik 8a03727d9c Fix various typos 2015-12-02 15:18:22 +01:00
Pieter Wuille dd5862c4cd Flush coins cache also after transaction processing 2015-12-01 15:52:09 -08:00
Matt Corallo bde953e281 Uncache input txn in utxo cache if a tx is not accepted to mempool 2015-12-01 15:52:09 -08:00
Matt Corallo 677aa3d88c Discard txn cache entries that were loaded for removed mempool txn 2015-12-01 15:52:07 -08:00
Alex Morcos 5f12263302 Expose FormatStateMessage 2015-12-01 10:10:25 -05:00
Alex Morcos c49d5bc9e6 Store the total sig op count of a tx.
Store sum of legacy and P2SH sig op counts.  This is calculated in AcceptToMemory pool and storing it saves redoing the expensive calculation in block template creation.
2015-12-01 10:10:25 -05:00
Wladimir J. van der Laan c0c08c7c68
Merge pull request #7141
aabc897 rpc: Don't translate warning messages (Wladimir J. van der Laan)
2015-12-01 13:21:16 +01:00
Wladimir J. van der Laan 2ef5ffa59a
Merge pull request #6915
2d8860e Fix removeForReorg to use MedianTimePast (Suhas Daftuar)
b7fa4aa Don't call removeForReorg if DisconnectTip fails (Suhas Daftuar)
7e49f5f Track coinbase spends in CTxMemPoolEntry (Suhas Daftuar)
bb8ea1f removeForReorg calls once-per-disconnect-> once-per-reorg (Matt Corallo)
474b84a Make indentation in ActivateBestChainStep readable (Matt Corallo)
b0a064c Fix comment in removeForReorg (Matt Corallo)
9b060e5 Fix removal of time-locked transactions during reorg (Matt Corallo)
0c9959a Add failing test checking timelocked-txn removal during reorg (Matt Corallo)
2015-12-01 13:17:34 +01:00
Wladimir J. van der Laan aabc897801 rpc: Don't translate warning messages
But keep translating them in the GUI.
This - necessarily - requires duplication of a few messages.
Alternative take on #7134, that keeps the translations from being wiped.

Also document GetWarnings() input argument.

Fixes #5895.
2015-12-01 10:07:22 +01:00
Wladimir J. van der Laan 1b5118bfa0
Merge pull request #7079
ebb25f4 Limit setAskFor and retire requested entries only when a getdata returns. (Gregory Maxwell)
5029698 prevent peer flooding request queue for an inv (kazcw)
2015-12-01 09:02:33 +01:00
Suhas Daftuar 2d8860e820 Fix removeForReorg to use MedianTimePast 2015-11-30 14:35:17 -05:00
Suhas Daftuar b7fa4aa387 Don't call removeForReorg if DisconnectTip fails 2015-11-30 13:12:55 -05:00
Suhas Daftuar 7e49f5f8b4 Track coinbase spends in CTxMemPoolEntry
This allows us to optimize CTxMemPool::removeForReorg.
2015-11-30 13:12:53 -05:00
Matt Corallo bb8ea1f630 removeForReorg calls once-per-disconnect-> once-per-reorg 2015-11-30 13:03:57 -05:00
Matt Corallo 474b84a741 Make indentation in ActivateBestChainStep readable 2015-11-30 13:03:56 -05:00
Matt Corallo 9b060e5cfb Fix removal of time-locked transactions during reorg 2015-11-30 13:02:04 -05:00
Gregory Maxwell ebb25f4c23 Limit setAskFor and retire requested entries only when a getdata returns.
The setAskFor duplicate elimination was too eager and removed entries
 when we still had no getdata response, allowing the peer to keep
 INVing and not responding.
2015-11-23 01:54:23 +00:00
kazcw 5029698186 prevent peer flooding request queue for an inv
mapAlreadyAskedFor does not keep track of which peer has a request queued for a
particular tx. As a result, a peer can blind a node to a tx indefinitely by
sending many invs for the same tx, and then never replying to getdatas for it.
Each inv received will be placed 2 minutes farther back in mapAlreadyAskedFor,
so a short message containing 10 invs would render that tx unavailable for 20
minutes.

This is fixed by disallowing a peer from having more than one entry for a
particular inv in mapAlreadyAskedFor at a time.
2015-11-23 01:18:54 +00:00
Gregory Maxwell c322652b71
Merge pull request #7046
80ae230 Improve log messages for blocks only violations. (Patick Strateman)
08843ed Add relaytxes status to getpeerinfo (Peter Todd)
d8aaa51 Bail early in processing transactions in blocks only mode. (Patick Strateman)
3587f6a Fix relay mechanism for whitelisted peers under blocks only mode. (Patick Strateman)
2015-11-22 14:01:33 -08:00
Patick Strateman 80ae230a52 Improve log messages for blocks only violations. 2015-11-21 16:09:52 -08:00
Gregory Maxwell 31de2414c6
Merge pull request #7011
6531f17 Add mediantime field to getblock and getblockheader (Peter Todd)
7259769 Document new mediantime field in getblockchaininfo (Peter Todd)
c277a63 Clarify nLockTime-by-time comment in CheckFinalTx() (Peter Todd)
748321e Add mediantime field to getblockchaininfo RPC call (Peter Todd)
2015-11-21 14:00:55 -08:00
Patick Strateman d8aaa51bec Bail early in processing transactions in blocks only mode.
Previously unsolicited transactions would be processed as normal.
2015-11-20 16:07:12 -08:00
Patick Strateman 3587f6a024 Fix relay mechanism for whitelisted peers under blocks only mode.
Previously in blocks only mode all inv messages where type!=MSG_BLOCK would be
rejected without regard for whitelisting or whitelistalwaysrelay.

As such whitelisted peers would never send the transaction (which would be
processed).
2015-11-20 16:07:12 -08:00
Alex Morcos c0353064dd Change GetPriority calculation.
Compute the value of inputs that already are in the chain at time of mempool entry and only increase priority due to aging for those inputs.  This effectively changes the CTxMemPoolEntry's GetPriority calculation from an upper bound to a lower bound.
2015-11-19 21:44:35 -05:00
Wladimir J. van der Laan 96b802510d
Merge pull request #7112
9af5f9c Move uiInterface.NotifyBlockTip signal above the core/wallet signal - This will keep getbestblockhash more in sync with blocknotify callbacks (Jonas Schnelli)
4082e46 [Qt] call GuessVerificationProgress synchronous during core signal, pass double over UI signal (Jonas Schnelli)
947d20b [Qt] reduce cs_main in getVerificationProgress() (Jonas Schnelli)
e6d50fc [Qt] update block tip (height and date) without locking cs_main, update always (each block) (Jonas Schnelli)
012fc91 NotifyBlockTip signal: switch from hash (uint256) to CBlockIndex* - also adds a boolean for indication if the tip update was happening during initial sync - emit notification also during initial sync (Jonas Schnelli)
2015-11-30 13:04:29 +01:00
Jonas Schnelli 9af5f9cb87
Move uiInterface.NotifyBlockTip signal above the core/wallet signal
- This will keep getbestblockhash more in sync with blocknotify callbacks
2015-11-30 11:34:09 +01:00
Wladimir J. van der Laan 74b5ce24c6
Merge pull request #7116
cb491e7 Trivial: Fix warning introduced by #7053 by casting to uint64_t (Jorge Timón)
2015-11-30 10:18:46 +01:00
Jonas Schnelli 4082e46603
[Qt] call GuessVerificationProgress synchronous during core signal, pass double over UI signal 2015-11-30 08:53:57 +01:00
Jonas Schnelli 012fc91511
NotifyBlockTip signal: switch from hash (uint256) to CBlockIndex*
- also adds a boolean for indication if the tip update was happening during initial sync
- emit notification also during initial sync
2015-11-30 08:50:59 +01:00
Jorge Timón cb491e7788 Trivial: Fix warning introduced by #7053 by casting to uint64_t 2015-11-29 21:19:37 +01:00
Suhas Daftuar 50262d8953 Allow block announcements with headers
This replaces using inv messages to announce new blocks, when a peer requests
(via the new "sendheaders" message) that blocks be announced with headers
instead of inv's.

Since headers-first was introduced, peers send getheaders messages in response
to an inv, which requires generating a block locator that is large compared to
the size of the header being requested, and requires an extra round-trip before
a reorg can be relayed.  Save time by tracking headers that a peer is likely to
know about, and send a headers chain that would connect to a peer's known
headers, unless the chain would be too big, in which case we revert to sending
an inv instead.

Based off of @sipa's commit to announce all blocks in a reorg via inv,
which has been squashed into this commit.

Rebased-by: Pieter Wuille
2015-11-29 11:59:23 +01:00
Gregory Maxwell c894fbbb1d
Merge pull request #7106
a9f3d3d Fix and improve relay from whitelisted peers (Pieter Wuille)
2015-11-28 16:09:40 -08:00
Pieter Wuille 61457c29d7
Merge pull request #6508
eece63f Switch blocks to a constant-space Merkle root/branch algorithm. (Pieter Wuille)
ee60e56 Add merkle.{h,cpp}, generic merkle root/branch algorithm (Pieter Wuille)
2015-11-28 22:27:38 +01:00
MarcoFalke faf93f37fe [trivial] Reuse translation and cleanup DEFAULT_* values
* DEFAULT_DISABLE_SAFEMODE = false
* Use DEFAULT_* constants for extern bools
2015-11-28 19:01:11 +01:00
Luke Dashjr b966aa836a Constrain constant values to a single location in code 2015-11-28 18:47:29 +01:00
Pieter Wuille eece63fa72 Switch blocks to a constant-space Merkle root/branch algorithm.
This switches the Merkle tree logic for blocks to one that runs in constant (small) space.
The old code is moved to tests, and a new test is added that for various combinations of
block sizes, transaction positions to compute a branch for, and mutations:
 * Verifies that the old code and new code agree for the Merkle root.
 * Verifies that the old code and new code agree for the Merkle branch.
 * Verifies that the computed Merkle branch is valid.
 * Verifies that mutations don't change the Merkle root.
 * Verifies that mutations are correctly detected.
2015-11-27 15:36:52 +01:00
Wladimir J. van der Laan 5ca149a3db
Merge pull request #7053
2e29e7e Globals: Remove a bunch of Params() calls from main.cpp: (Jorge Timón)
2015-11-27 13:29:54 +01:00
Wladimir J. van der Laan 0e935865b9
Merge pull request #6871
63b5840 Fix usage of local python-bitcoinlib (Peter Todd)
16a2f93 Fix incorrect locking of mempool during RBF replacement (Peter Todd)
97203f5 Port test to rpc-test framework (Suhas Daftuar)
20367d8 Add test for max replacement limit (Suhas Daftuar)
73d9040 Improve RBF replacement criteria (Suhas Daftuar)
b272ecf Reject replacements that add new unconfirmed inputs (Peter Todd)
fc8c19a Prevent low feerate txs from (directly) replacing high feerate txs (Peter Todd)
0137e6f Add tests for transaction replacement (Peter Todd)
5891f87 Add opt-in full-RBF to mempool (Peter Todd)
2015-11-27 13:20:39 +01:00
Pieter Wuille a9f3d3db5c Fix and improve relay from whitelisted peers
This makes sure that retransmits by a whitelisted peer also actually
result in a retransmit.

Further, this changes the logic to never relay in case we would assign
a DoS score, as we expect to get DoS banned ourselves as a result.
2015-11-26 23:44:57 +01:00
Patick Strateman 0f4dc53fd6 Add enforcenodebloom option.
Previously peers which implement a protocol version less than NO_BLOOM_VERSION
would not be disconnected for sending a filter command, regardless of the
peerbloomfilter option.

Many node operators do not wish to provide expensive bloom filtering for SPV
clients, previously they had to cherry pick the commit which enabled the
disconnect logic.

The default should remain false until a sufficient percent of SPV clients
have updated.
2015-11-24 02:08:00 -08:00
Patick Strateman b3caa9b7fa Move bloom filter filtering logic outside of command "switch" (giant if/else).
Moving this logic outside of the "switch" makes it far simpler to
enable the forced disconnect by a parameter.
2015-11-24 01:50:53 -08:00
Jorge Timón 2e29e7e247 Globals: Remove a bunch of Params() calls from main.cpp:
1) Chainparams: Explicit CChainParams arg for main:

-AcceptBlock
-AcceptBlockHeader
-ActivateBestChain
-ConnectTip
-InitBlockIndex
-LoadExternalBlockFile
-VerifyDB parametric constructor

2) Also pickup more Params()\. in main.cpp

3) Pass nPruneAfterHeight explicitly to new FindFilesToPrune() in main.cpp
2015-11-23 12:14:40 +01:00
Wladimir J. van der Laan 73fa5e6043
Merge pull request #6932
1cf3dd8 Add unit test for UpdateCoins (Alex Morcos)
03c8282 Make CCoinsViewTest behave like CCoinsViewDB (Alex Morcos)
14470f9 ModifyNewCoins saves database lookups (Alex Morcos)
2015-11-18 17:37:58 +01:00
Alex Morcos e855b0152f Fix debug log message for block files 2015-11-17 22:23:39 -05:00
Gregory Maxwell 87ee0e2dbc
Merge pull request #6986
6bc9e40 Chainparams: Explicit CChainParams arg for miner: (Jorge Timón)
598e494 Chainparams: Explicit CChainParams arg for main (pre miner): (Jorge Timón)
2015-11-16 17:00:11 -08:00
Eric Lombrozo 4d29032a64 Fixed integer comparison warning. 2015-11-15 20:13:30 -05:00
Gregory Maxwell b632145ede
Merge pull request #6993
bbf49da Fix comment for blocksonly parameter interactions (Patick Strateman)
6a4982f Fix fRelayTxs comment (Patick Strateman)
59441a0 Display DEFAULT_WHITELISTALWAYSRELAY in help text (Patick Strateman)
71a2683 Use DEFAULT_BLOCKSONLY and DEFAULT_WHITELISTALWAYSRELAY constants (Patick Strateman)
762b13b Add help text for blocksonly and whitelistalwaysrelay (Patick Strateman)
3a96497 Add whitelistalwaysrelay option (Patick Strateman)
420fa81 Do not process tx inv's in blocksonly mode (Patick Strateman)
4044f07 Add blocksonly mode (Patick Strateman)
2015-11-14 05:23:00 -08:00
Patick Strateman 71a2683f4b Use DEFAULT_BLOCKSONLY and DEFAULT_WHITELISTALWAYSRELAY constants 2015-11-14 05:10:59 -08:00
Patick Strateman 3a964973fe Add whitelistalwaysrelay option 2015-11-14 04:52:21 -08:00