diff --git a/doc/payment-api.md b/doc/payment-api.md
index fc9e5e8c..71c069ae 100644
--- a/doc/payment-api.md
+++ b/doc/payment-api.md
@@ -46,8 +46,8 @@ RPC parameter conventions:
Command | Parameters | Description
--- | --- | ---
-z_getbalance
**(NOT IN Z9 ALPHA)**| address [minconf=1] | Returns the balance of a taddr or zaddr belonging to the node’s wallet.
Optionally set the minimum number of confirmations a private or transaction transaction must have in order to be included in the balance. Use 0 to count unconfirmed transactions.
-z_gettotalbalance
**(NOT IN Z9 ALPHA)**| [minconf=1] | Return the total value of funds stored in the node’s wallet.
Optionally set the minimum number of confirmations a private or transparent transaction must have in order to be included in the balance. Use 0 to count unconfirmed transactions.
Output:
{
"transparent" : 1.23,
"private" : 4.56,
"total" : 5.79}
+z_getbalance
| address [minconf=1] | Returns the balance of a taddr or zaddr belonging to the node’s wallet.
Optionally set the minimum number of confirmations a private or transaction transaction must have in order to be included in the balance. Use 0 to count unconfirmed transactions.
+z_gettotalbalance
| [minconf=1] | Return the total value of funds stored in the node’s wallet.
Optionally set the minimum number of confirmations a private or transparent transaction must have in order to be included in the balance. Use 0 to count unconfirmed transactions.
Output:
{
"transparent" : 1.23,
"private" : 4.56,
"total" : 5.79}
### Addresses
@@ -58,7 +58,7 @@ z_listaddresses | | Returns a list of all the zaddrs in this node’s wallet for
### Key Management
-**z9 alpha release note:** encrypted wallets are not yet fully supported. If the wallet is protected with a passphrase, zkeys will not be persisted to disk.
+**beta 1 release note:** encrypted wallets are not yet fully supported. If the wallet is protected with a passphrase, zkeys will not be persisted to disk.
Command | Parameters | Description
--- | --- | ---
@@ -71,8 +71,8 @@ z_importwallet | filename | _Requires an unlocked wallet or an unencrypted walle
Command | Parameters | Description
--- | --- | ---
-z_listreceivedbyaddress
**(NOT IN Z9 ALPHA)** | zaddr [minconf=1] | Return a list of amounts received by a zaddr belonging to the node’s wallet.
Optionally set the minimum number of confirmations which a received amount must have in order to be included in the result. Use 0 to count unconfirmed transactions.
Output:
[{
“txid”: “4a0f…”,
“amount”: 0.54,
“memo”:”F0FF…”,}, {...}, {...}
]
-z_sendmany
**(NOT IN Z9 ALPHA)** | fromaddress amounts [minconf=1] | _This is an Asynchronous RPC call_
Send funds from an address to multiple outputs. The address can be either a taddr or a zaddr.
Amounts is a list containing key/value pairs corresponding to the addresses and amount to pay. Each output address can be in taddr or zaddr format.
When sending to a zaddr, you also have the option of attaching a memo in hexadecimal format.
Example of Outputs parameter:
[{“address”:”t123…”, “amount”:0.005},
,{“address”:”z010…”,”amount”:0.03, “memo”:”f508af…”}]
Optionally set the minimum number of confirmations which a private or transparent transaction must have in order to be used as an input.
The transaction fee will be determined by the node’s wallet. Any transparent change will be sent to a new transparent address. Any private change will be sent back to the zaddr being used as the source of funds.
Returns an operationid. You use the operationid value with z_getoperationstatus and z_getoperationresult to obtain the result of sending funds, which if successful, will be a txid.
+z_listreceivedbyaddress
| zaddr [minconf=1] | Return a list of amounts received by a zaddr belonging to the node’s wallet.
Optionally set the minimum number of confirmations which a received amount must have in order to be included in the result. Use 0 to count unconfirmed transactions.
Output:
[{
“txid”: “4a0f…”,
“amount”: 0.54,
“memo”:”F0FF…”,}, {...}, {...}
]
+z_sendmany
| fromaddress amounts [minconf=1] | _This is an Asynchronous RPC call_
Send funds from an address to multiple outputs. The address can be either a taddr or a zaddr.
Amounts is a list containing key/value pairs corresponding to the addresses and amount to pay. Each output address can be in taddr or zaddr format.
When sending to a zaddr, you also have the option of attaching a memo in hexadecimal format.
Example of Outputs parameter:
[{“address”:”t123…”, “amount”:0.005},
,{“address”:”z010…”,”amount”:0.03, “memo”:”f508af…”}]
Optionally set the minimum number of confirmations which a private or transparent transaction must have in order to be used as an input.
The transaction fee will be determined by the node’s wallet. Any transparent change will be sent to a new transparent address. Any private change will be sent back to the zaddr being used as the source of funds.
Returns an operationid. You use the operationid value with z_getoperationstatus and z_getoperationresult to obtain the result of sending funds, which if successful, will be a txid.
### Operations
@@ -96,6 +96,6 @@ It is currently not possible to cancel operations.
Command | Parameters | Description
--- | --- | ---
-z_getoperationresult
**(NOT IN Z9 ALPHA)**| [operationids] | Return OperationStatus JSON objects for all completed operations the node is currently aware of, and then remove the operation from memory.
Operationids is an optional array to filter which operations you want to receive status objects for.
Output is a list of operation status objects, where the status is either "failed", "cancelled" or "success".
[
{“operationid”: “opid-11ee…”,
“status”: “cancelled”},
{“operationid”: “opid-9876”, “status”: ”failed”},
{“operationid”: “opid-0e0e”,
“status”:”success”,
“execution_time”:”25”,
“result”: {“txid”:”af3887654…”,...}
},
]
-z_getoperationstatus
**(NOT IN Z9 ALPHA)**| [operationids] | Return OperationStatus JSON objects for all operations the node is currently aware of.
Operationids is an optional array to filter which operations you want to receive status objects for.
Output is a list of operation status objects.
[
{“operationid”: “opid-12ee…”,
“status”: “queued”},
{“operationid”: “opd-098a…”, “status”: ”executing”},
{“operationid”: “opid-9876”, “status”: ”failed”}
]
When the operation succeeds, the status object will also include the result.
{“operationid”: “opid-0e0e”,
“status”:”success”,
“execution_time”:”25”,
“result”: {“txid”:”af3887654…”,...}
}
-z_listoperationids
**(NOT IN Z9 ALPHA)**| [state] | Return a list of operationids for all operations which the node is currently aware of.
State is an optional string parameter to filter the operations you want listed by their state. Acceptable parameter values are ‘queued’, ‘executing’, ‘success’, ‘failed’, ‘cancelled’.
[“opid-0e0e…”, “opid-1af4…”, … ]
+z_getoperationresult
| [operationids] | Return OperationStatus JSON objects for all completed operations the node is currently aware of, and then remove the operation from memory.
Operationids is an optional array to filter which operations you want to receive status objects for.
Output is a list of operation status objects, where the status is either "failed", "cancelled" or "success".
[
{“operationid”: “opid-11ee…”,
“status”: “cancelled”},
{“operationid”: “opid-9876”, “status”: ”failed”},
{“operationid”: “opid-0e0e”,
“status”:”success”,
“execution_time”:”25”,
“result”: {“txid”:”af3887654…”,...}
},
]
+z_getoperationstatus
| [operationids] | Return OperationStatus JSON objects for all operations the node is currently aware of.
Operationids is an optional array to filter which operations you want to receive status objects for.
Output is a list of operation status objects.
[
{“operationid”: “opid-12ee…”,
“status”: “queued”},
{“operationid”: “opd-098a…”, “status”: ”executing”},
{“operationid”: “opid-9876”, “status”: ”failed”}
]
When the operation succeeds, the status object will also include the result.
{“operationid”: “opid-0e0e”,
“status”:”success”,
“execution_time”:”25”,
“result”: {“txid”:”af3887654…”,...}
}
+z_listoperationids
| [state] | Return a list of operationids for all operations which the node is currently aware of.
State is an optional string parameter to filter the operations you want listed by their state. Acceptable parameter values are ‘queued’, ‘executing’, ‘success’, ‘failed’, ‘cancelled’.
[“opid-0e0e…”, “opid-1af4…”, … ]