package contractcourt import ( "bytes" "crypto/sha256" "encoding/binary" "fmt" "io" "io/ioutil" "github.com/davecgh/go-spew/spew" "github.com/lightningnetwork/lnd/chainntnfs" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwire" "github.com/roasbeef/btcd/txscript" "github.com/roasbeef/btcd/wire" ) var ( endian = binary.BigEndian ) // ContractResolver is an interface which packages a state machine which is // able to carry out the necessary steps required to fully resolve a Bitcoin // contract on-chain. Resolvers are fully encodable to ensure callers are able // to persist them properly. A resolver may produce another resolver in the // case that claiming an HTLC is a multi-stage process. In this case, we may // partially resolve the contract, then persist, and set up for an additional // resolution. type ContractResolver interface { // ResolverKey returns an identifier which should be globally unique // for this particular resolver within the chain the original contract // resides within. ResolverKey() []byte // Resolve instructs the contract resolver to resolve the output // on-chain. Once the output has been *fully* resolved, the function // should return immediately with a nil ContractResolver value for the // first return value. In the case that the contract requires further // resolution, then another resolve is returned. // // NOTE: This function MUST be run as a goroutine. Resolve() (ContractResolver, error) // IsResolved returns true if the stored state in the resolve is fully // resolved. In this case the target output can be forgotten. IsResolved() bool // Encode writes an encoded version of the ContractResolver into the // passed Writer. Encode(w io.Writer) error // Decode attempts to decode an encoded ContractResolver from the // passed Reader instance, returning an active ContractResolver // instance. Decode(r io.Reader) error // AttachResolverKit should be called once a resolved is successfully // decoded from its stored format. This struct delivers a generic tool // kit that resolvers need to complete their duty. AttachResolverKit(ResolverKit) // Stop signals the resolver to cancel any current resolution // processes, and suspend. Stop() } // ResolverKit is meant to be used as a mix-in struct to be embedded within a // given ContractResolver implementation. It contains all the items that a // resolver requires to carry out its duties. type ResolverKit struct { // ChannelArbitratorConfig contains all the interfaces and closures // required for the resolver to interact with outside sub-systems. ChannelArbitratorConfig // Checkpoint allows a resolver to check point its state. This function // should write the state of the resolver to persistent storage, and // return a non-nil error upon success. Checkpoint func(ContractResolver) error Quit chan struct{} } // htlcTimeoutResolver is a ContractResolver that's capable of resolving an // outgoing HTLC. The HTLC may be on our commitment transaction, or on the // commitment transaction of the remote party. An output on our commitment // transaction is considered fully resolved once the second-level transaction // has been confirmed (and reached a sufficient depth). An output on the // commitment transaction of the remote party is resolved once we detect a // spend of the direct HTLC output using the timeout clause. type htlcTimeoutResolver struct { // htlcResolution contains all the information required to properly // resolve this outgoing HTLC. htlcResolution lnwallet.OutgoingHtlcResolution // outputIncubating returns true if we've sent the output to the output // incubator (utxo nursery). outputIncubating bool // resolved reflects if the contract has been fully resolved or not. resolved bool // broadcastHeight is the height that the original contract was // broadcast to the main-chain at. We'll use this value to bound any // historical queries to the chain for spends/confirmations. // // TODO(roasbeef): wrap above into definite resolution embedding? broadcastHeight uint32 // htlcIndex is the index of this HTLC within the trace of the // additional commitment state machine. htlcIndex uint64 ResolverKit } // ResolverKey returns an identifier which should be globally unique for this // particular resolver within the chain the original contract resides within. // // NOTE: Part of the ContractResolver interface. func (h *htlcTimeoutResolver) ResolverKey() []byte { // The primary key for this resolver will be the outpoint of the HTLC // on the commitment transaction itself. If this is our commitment, // then the output can be found within the signed timeout tx, // otherwise, it's just the ClaimOutpoint. var op wire.OutPoint if h.htlcResolution.SignedTimeoutTx != nil { op = h.htlcResolution.SignedTimeoutTx.TxIn[0].PreviousOutPoint } else { op = h.htlcResolution.ClaimOutpoint } key := newResolverID(op) return key[:] } // Resolve kicks off full resolution of an outgoing HTLC output. If it's our // commitment, it isn't resolved until we see the second level HTLC txn // confirmed. If it's the remote party's commitment, we don't resolve until we // see a direct sweep via the timeout clause. // // NOTE: Part of the ContractResolver interface. func (h *htlcTimeoutResolver) Resolve() (ContractResolver, error) { // If we're already resolved, then we can exit early. if h.resolved { return nil, nil } // If we haven't already sent the output to the utxo nursery, then // we'll do so now. if !h.outputIncubating { log.Tracef("%T(%v): incubating htlc output", h, h.htlcResolution.ClaimOutpoint) err := h.IncubateOutputs(h.ChanPoint, nil, &h.htlcResolution, nil) if err != nil { return nil, err } h.outputIncubating = true if err := h.Checkpoint(h); err != nil { log.Errorf("unable to Checkpoint: %v", err) } } // waitForOutputResolution waits for the HTLC output to be fully // resolved. The output is considered fully resolved once it has been // spent, and the spending transaction has been fully confirmed. waitForOutputResolution := func() error { // We first need to register to see when the HTLC output itself // has been spent so we can wait for the spending transaction // to confirm. spendNtfn, err := h.Notifier.RegisterSpendNtfn( &h.htlcResolution.ClaimOutpoint, h.broadcastHeight, ) if err != nil { return err } var spendDetail *chainntnfs.SpendDetail select { case s, ok := <-spendNtfn.Spend: if !ok { return fmt.Errorf("notifier quit") } spendDetail = s case <-h.Quit: return fmt.Errorf("quitting") } // Now that the output has been spent, we'll also wait for the // transaction to be confirmed before proceeding. confNtfn, err := h.Notifier.RegisterConfirmationsNtfn( spendDetail.SpenderTxHash, 1, uint32(spendDetail.SpendingHeight-1), ) if err != nil { return err } log.Infof("%T(%v): waiting for spending (txid=%v) to be fully "+ "confirmed", h, h.htlcResolution.ClaimOutpoint, spendDetail.SpenderTxHash) select { case _, ok := <-confNtfn.Confirmed: if !ok { return fmt.Errorf("notifier quit") } case <-h.Quit: return fmt.Errorf("quitting") } return nil } // With the output sent to the nursery, we'll now wait until the output // has been fully resolved before sending the clean up message. // // TODO(roasbeef): need to be able to cancel nursery? // * if they pull on-chain while we're waiting // If we don't have a second layer transaction, then this is a remote // party's commitment, so we'll watch for a direct spend. if h.htlcResolution.SignedTimeoutTx == nil { // We'll block until: the HTLC output has been spent, and the // transaction spending that output is sufficiently confirmed. log.Infof("%T(%v): waiting for nursery to spend CLTV-locked "+ "output", h, h.htlcResolution.ClaimOutpoint) if err := waitForOutputResolution(); err != nil { return nil, err } } else { // Otherwise, this is our commitment, so we'll watch for the // second-level transaction to be sufficiently confirmed. secondLevelTXID := h.htlcResolution.SignedTimeoutTx.TxHash() confNtfn, err := h.Notifier.RegisterConfirmationsNtfn( &secondLevelTXID, 1, h.broadcastHeight, ) if err != nil { return nil, err } log.Infof("%T(%v): waiting second-level tx (txid=%v) to be "+ "fully confirmed", h, h.htlcResolution.ClaimOutpoint, secondLevelTXID) select { case _, ok := <-confNtfn.Confirmed: if !ok { return nil, fmt.Errorf("quitting") } case <-h.Quit: return nil, fmt.Errorf("quitting") } } // TODO(roasbeef): need to watch for remote party sweeping with pre-image? // * have another waiting on spend above, will check the type, if it's // pre-image, then we'll cancel, and send a clean up back with // pre-image, also add to preimage cache log.Infof("%T(%v): resolving htlc with incoming fail msg, fully "+ "confirmed", h, h.htlcResolution.ClaimOutpoint) // At this point, the second-level transaction is sufficiently // confirmed, or a transaction directly spending the output is. // Therefore, we can now send back our clean up message. failureMsg := &lnwire.FailPermanentChannelFailure{} if err := h.DeliverResolutionMsg(ResolutionMsg{ SourceChan: h.ShortChanID, HtlcIndex: h.htlcIndex, Failure: failureMsg, }); err != nil { return nil, err } // Finally, if this was an output on our commitment transaction, we'll // for the second-level HTLC output to be spent, and for that // transaction itself to confirm. if h.htlcResolution.SignedTimeoutTx != nil { log.Infof("%T(%v): waiting for nursery to spend CSV delayed "+ "output", h, h.htlcResolution.ClaimOutpoint) if err := waitForOutputResolution(); err != nil { return nil, err } } // With the clean up message sent, we'll now mark the contract // resolved, and wait. h.resolved = true return nil, h.Checkpoint(h) } // Stop signals the resolver to cancel any current resolution processes, and // suspend. // // NOTE: Part of the ContractResolver interface. func (h *htlcTimeoutResolver) Stop() { close(h.Quit) } // IsResolved returns true if the stored state in the resolve is fully // resolved. In this case the target output can be forgotten. // // NOTE: Part of the ContractResolver interface. func (h *htlcTimeoutResolver) IsResolved() bool { return h.resolved } // Encode writes an encoded version of the ContractResolver into the passed // Writer. // // NOTE: Part of the ContractResolver interface. func (h *htlcTimeoutResolver) Encode(w io.Writer) error { // First, we'll write out the relevant fields of the // OutgoingHtlcResolution to the writer. if err := encodeOutgoingResolution(w, &h.htlcResolution); err != nil { return err } // With that portion written, we can now write out the fields specific // to the resolver itself. if err := binary.Write(w, endian, h.outputIncubating); err != nil { return err } if err := binary.Write(w, endian, h.resolved); err != nil { return err } if err := binary.Write(w, endian, h.broadcastHeight); err != nil { return err } if err := binary.Write(w, endian, h.htlcIndex); err != nil { return err } return nil } // Decode attempts to decode an encoded ContractResolver from the passed Reader // instance, returning an active ContractResolver instance. // // NOTE: Part of the ContractResolver interface. func (h *htlcTimeoutResolver) Decode(r io.Reader) error { // First, we'll read out all the mandatory fields of the // OutgoingHtlcResolution that we store. if err := decodeOutgoingResolution(r, &h.htlcResolution); err != nil { return err } // With those fields read, we can now read back the fields that are // specific to the resolver itself. if err := binary.Read(r, endian, &h.outputIncubating); err != nil { return err } if err := binary.Read(r, endian, &h.resolved); err != nil { return err } if err := binary.Read(r, endian, &h.broadcastHeight); err != nil { return err } if err := binary.Read(r, endian, &h.htlcIndex); err != nil { return err } return nil } // AttachResolverKit should be called once a resolved is successfully decoded // from its stored format. This struct delivers a generic tool kit that // resolvers need to complete their duty. // // NOTE: Part of the ContractResolver interface. func (h *htlcTimeoutResolver) AttachResolverKit(r ResolverKit) { h.ResolverKit = r } // A compile time assertion to ensure htlcTimeoutResolver meets the // ContractResolver interface. var _ ContractResolver = (*htlcTimeoutResolver)(nil) // htlcSuccessResolver is a resolver that's capable of sweeping an incoming // HTLC output on-chain. If this is the remote party's commitment, we'll sweep // it directly from the commitment output *immediately*. If this is our // commitment, we'll first broadcast the success transaction, then send it to // the incubator for sweeping. That's it, no need to send any clean up // messages. // // TODO(roasbeef): don't need to broadcast? type htlcSuccessResolver struct { // htlcResolution is the incoming HTLC resolution for this HTLC. It // contains everything we need to properly resolve this HTLC. htlcResolution lnwallet.IncomingHtlcResolution // outputIncubating returns true if we've sent the output to the output // incubator (utxo nursery). outputIncubating bool // resolved reflects if the contract has been fully resolved or not. resolved bool // broadcastHeight is the height that the original contract was // broadcast to the main-chain at. We'll use this value to bound any // historical queries to the chain for spends/confirmations. broadcastHeight uint32 // payHash is the payment hash of the original HTLC extended to us. payHash [32]byte // sweepTx will be non-nil if we've already crafted a transaction to // sweep a direct HTLC output. This is only a concern if we're sweeping // from the commitment transaction of the remote party. // // TODO(roasbeef): send off to utxobundler sweepTx *wire.MsgTx ResolverKit } // ResolverKey returns an identifier which should be globally unique for this // particular resolver within the chain the original contract resides within. // // NOTE: Part of the ContractResolver interface. func (h *htlcSuccessResolver) ResolverKey() []byte { // The primary key for this resolver will be the outpoint of the HTLC // on the commitment transaction itself. If this is our commitment, // then the output can be found within the signed success tx, // otherwise, it's just the ClaimOutpoint. var op wire.OutPoint if h.htlcResolution.SignedSuccessTx != nil { op = h.htlcResolution.SignedSuccessTx.TxIn[0].PreviousOutPoint } else { op = h.htlcResolution.ClaimOutpoint } key := newResolverID(op) return key[:] } // Resolve attempts to resolve an unresolved incoming HTLC that we know the // preimage to. If the HTLC is on the commitment of the remote party, then // we'll simply sweep it directly. Otherwise, we'll hand this off to the utxo // nursery to do its duty. // // TODO(roasbeef): create multi to batch // // NOTE: Part of the ContractResolver interface. func (h *htlcSuccessResolver) Resolve() (ContractResolver, error) { // If we're already resolved, then we can exit early. if h.resolved { return nil, nil } // If we don't have a success transaction, then this means that this is // an output on the remote party's commitment transaction. if h.htlcResolution.SignedSuccessTx == nil { // If we don't already have the sweep transaction constructed, // we'll do so and broadcast it. if h.sweepTx == nil { log.Infof("%T(%x): crafting sweep tx for "+ "incoming+remote htlc confirmed", h, h.payHash[:]) // In this case, we can sweep it directly from the // commitment output. We'll first grab a fresh address // from the wallet to sweep the output. addr, err := h.NewSweepAddr() if err != nil { return nil, err } // With out address obtained, we'll query for an // estimate to be confirmed at ease. // // TODO(roasbeef): signal up if fee would be too large // to sweep singly, need to batch satWeight, err := h.FeeEstimator.EstimateFeePerWeight(6) if err != nil { return nil, err } log.Debugf("%T(%x): using %v sat/weight to sweep htlc"+ "incoming+remote htlc confirmed", h, h.payHash[:], int64(satWeight)) // Using a weight estimator, we'll compute the total // fee required, and from that the value we'll end up // with. totalWeight := (&lnwallet.TxWeightEstimator{}). AddWitnessInput(lnwallet.OfferedHtlcSuccessWitnessSize). AddP2WKHOutput().Weight() totalFees := int64(totalWeight) * int64(satWeight) sweepAmt := h.htlcResolution.SweepSignDesc.Output.Value - totalFees // With the fee computation finished, we'll now // construct the sweep transaction. htlcPoint := h.htlcResolution.ClaimOutpoint h.sweepTx = wire.NewMsgTx(2) h.sweepTx.AddTxIn(&wire.TxIn{ PreviousOutPoint: htlcPoint, }) h.sweepTx.AddTxOut(&wire.TxOut{ PkScript: addr, Value: sweepAmt, }) // With the transaction fully assembled, we can now // generate a valid witness for the transaction. h.htlcResolution.SweepSignDesc.SigHashes = txscript.NewTxSigHashes( h.sweepTx, ) h.sweepTx.TxIn[0].Witness, err = lnwallet.SenderHtlcSpendRedeem( h.Signer, &h.htlcResolution.SweepSignDesc, h.sweepTx, h.htlcResolution.Preimage[:], ) if err != nil { return nil, err } log.Infof("%T(%x): crafted sweep tx=%v", h, h.payHash[:], spew.Sdump(h.sweepTx)) // With the sweep transaction confirmed, we'll now // Checkpoint our state. if err := h.Checkpoint(h); err != nil { log.Errorf("unable to Checkpoint: %v", err) } // Finally, we'll broadcast the sweep transaction to // the network. // // TODO(roasbeef): validate first? if err := h.PublishTx(h.sweepTx); err != nil { log.Infof("%T(%x): unable to publish tx: %v", h, h.payHash[:], err) return nil, err } } // With the sweep transaction broadcast, we'll wait for its // confirmation. sweepTXID := h.sweepTx.TxHash() confNtfn, err := h.Notifier.RegisterConfirmationsNtfn( &sweepTXID, 1, h.broadcastHeight, ) if err != nil { return nil, err } log.Infof("%T(%x): waiting for sweep tx (txid=%v) to be "+ "confirmed", h, h.payHash[:], sweepTXID) select { case _, ok := <-confNtfn.Confirmed: if !ok { return nil, fmt.Errorf("quitting") } case <-h.Quit: return nil, fmt.Errorf("quitting") } // Once the transaction has received a sufficient number of // confirmations, we'll mark ourselves as fully resolved and exit. h.resolved = true return nil, h.Checkpoint(h) } log.Infof("%T(%x): broadcasting second-layer transition tx: %v", h, h.payHash[:], spew.Sdump(h.htlcResolution.SignedSuccessTx)) // We'll now broadcast the second layer transaction so we can kick off // the claiming process. // // TODO(roasbeef): after changing sighashes send to tx bundler if err := h.PublishTx(h.htlcResolution.SignedSuccessTx); err != nil { // TODO(roasbeef): detect double spends return nil, err } // Otherwise, this is an output on our commitment transaction. In this // case, we'll send it to the incubator, but only if we haven't already // done so. if !h.outputIncubating { log.Infof("%T(%x): incubating incoming htlc output", h, h.payHash[:]) err := h.IncubateOutputs(h.ChanPoint, nil, nil, &h.htlcResolution) if err != nil { return nil, err } h.outputIncubating = true if err := h.Checkpoint(h); err != nil { log.Errorf("unable to Checkpoint: %v", err) } } // To wrap this up, we'll wait until the second-level transaction has // been spent, then fully resolve the contract. spendNtfn, err := h.Notifier.RegisterSpendNtfn( &h.htlcResolution.ClaimOutpoint, h.broadcastHeight, ) if err != nil { return nil, err } log.Infof("%T(%x): waiting for second-level HTLC output to be spent "+ "after csv_delay=%v", h, h.payHash[:], h.htlcResolution.CsvDelay) select { case _, ok := <-spendNtfn.Spend: if !ok { return nil, fmt.Errorf("quitting") } case <-h.Quit: return nil, fmt.Errorf("quitting") } h.resolved = true return nil, h.Checkpoint(h) } // Stop signals the resolver to cancel any current resolution processes, and // suspend. // // NOTE: Part of the ContractResolver interface. func (h *htlcSuccessResolver) Stop() { close(h.Quit) } // IsResolved returns true if the stored state in the resolve is fully // resolved. In this case the target output can be forgotten. // // NOTE: Part of the ContractResolver interface. func (h *htlcSuccessResolver) IsResolved() bool { return h.resolved } // Encode writes an encoded version of the ContractResolver into the passed // Writer. // // NOTE: Part of the ContractResolver interface. func (h *htlcSuccessResolver) Encode(w io.Writer) error { // First we'll encode our inner HTLC resolution. if err := encodeIncomingResolution(w, &h.htlcResolution); err != nil { return err } // Next, we'll write out the fields that are specified to the contract // resolver. if err := binary.Write(w, endian, h.outputIncubating); err != nil { return err } if err := binary.Write(w, endian, h.resolved); err != nil { return err } if err := binary.Write(w, endian, h.broadcastHeight); err != nil { return err } if _, err := w.Write(h.payHash[:]); err != nil { return err } return nil } // Decode attempts to decode an encoded ContractResolver from the passed Reader // instance, returning an active ContractResolver instance. // // NOTE: Part of the ContractResolver interface. func (h *htlcSuccessResolver) Decode(r io.Reader) error { // First we'll decode our inner HTLC resolution. if err := decodeIncomingResolution(r, &h.htlcResolution); err != nil { return err } // Next, we'll read all the fields that are specified to the contract // resolver. if err := binary.Read(r, endian, &h.outputIncubating); err != nil { return err } if err := binary.Read(r, endian, &h.resolved); err != nil { return err } if err := binary.Read(r, endian, &h.broadcastHeight); err != nil { return err } if _, err := io.ReadFull(r, h.payHash[:]); err != nil { return err } return nil } // AttachResolverKit should be called once a resolved is successfully decoded // from its stored format. This struct delivers a generic tool kit that // resolvers need to complete their duty. // // NOTE: Part of the ContractResolver interface. func (h *htlcSuccessResolver) AttachResolverKit(r ResolverKit) { h.ResolverKit = r } // A compile time assertion to ensure htlcSuccessResolver meets the // ContractResolver interface. var _ ContractResolver = (*htlcSuccessResolver)(nil) // htlcOutgoingContestResolver is a ContractResolver that's able to resolve an // outgoing HTLC that is still contested. An HTLC is still contested, if at the // time that we broadcast the commitment transaction, it isn't able to be fully // resolved. This this case, we'll either wait for the HTLC to timeout, or for // us to learn of the preimage. type htlcOutgoingContestResolver struct { // htlcTimeoutResolver is the inner solver that this resolver may turn // into. This only happens if the HTLC expires on-chain. htlcTimeoutResolver } // Resolve commences the resolution of this contract. As this contract hasn't // yet timed out, we'll wait for one of two things to happen // // 1. The HTLC expires. In this case, we'll sweep the funds and send a clean // up cancel message to outside sub-systems. // // 2. The remote party sweeps this HTLC on-chain, in which case we'll add the // pre-image to our global cache, then send a clean up settle message // backwards. // // When either of these two things happens, we'll create a new resolver which // is able to handle the final resolution of the contract. We're only the pivot // point. func (h *htlcOutgoingContestResolver) Resolve() (ContractResolver, error) { // If we're already full resolved, then we don't have anything further // to do. if h.resolved { return nil, nil } // claimCleanUp is a helper function that's called once the HTLC output // is spent by the remote party. It'll extract the preimage, add it to // the global cache, and finally send the appropriate clean up message. claimCleanUp := func(commitSpend *chainntnfs.SpendDetail) (ContractResolver, error) { // Depending on if this is our commitment or not, then we'll be // looking for a different witness pattern. spenderIndex := commitSpend.SpenderInputIndex spendingInput := commitSpend.SpendingTx.TxIn[spenderIndex] log.Infof("%T(%v): extracting preimage! remote party spent "+ "HTLC with tx=%v", h, h.htlcResolution.ClaimOutpoint, spew.Sdump(commitSpend.SpendingTx)) // If this is the remote party's commitment, then we'll be // looking for them to spend using the second-level success // transaction. var preimage [32]byte if h.htlcResolution.SignedTimeoutTx == nil { // The witness stack when the remote party sweeps the // output to them looks like: // // * copy(preimage[:], spendingInput.Witness[3]) } else { // Otherwise, they'll be spending directly from our // commitment output. In which case the witness stack // looks like: // // * copy(preimage[:], spendingInput.Witness[1]) } log.Infof("%T(%v): extracting preimage=%x from on-chain "+ "spend!", h, h.htlcResolution.ClaimOutpoint, preimage[:]) // With the preimage obtained, we can now add it to the global // cache. if err := h.PreimageDB.AddPreimage(preimage[:]); err != nil { log.Errorf("%T(%v): unable to add witness to cache", h, h.htlcResolution.ClaimOutpoint) } // Finally, we'll send the clean up message, mark ourselves as // resolved, then exit. if err := h.DeliverResolutionMsg(ResolutionMsg{ SourceChan: h.ShortChanID, HtlcIndex: h.htlcIndex, PreImage: &preimage, }); err != nil { return nil, err } h.resolved = true return nil, h.Checkpoint(h) } // Otherwise, we'll watch for two external signals to decide if we'll // morph into another resolver, or fully resolve the contract. // The output we'll be watching for is the *direct* spend from the HTLC // output. If this isn't our commitment transaction, it'll be right on // the resolution. Otherwise, we fetch this pointer from the input of // the time out transaction. var outPointToWatch wire.OutPoint if h.htlcResolution.SignedTimeoutTx == nil { outPointToWatch = h.htlcResolution.ClaimOutpoint } else { outPointToWatch = h.htlcResolution.SignedTimeoutTx.TxIn[0].PreviousOutPoint } // First, we'll register for a spend notification for this output. If // the remote party sweeps with the pre-image, we'll be notified. spendNtfn, err := h.Notifier.RegisterSpendNtfn( &outPointToWatch, h.broadcastHeight, ) if err != nil { return nil, err } // We'll quickly check to see if the output has already been spent. select { // If the output has already been spent, then we can stop early and case commitSpend, ok := <-spendNtfn.Spend: if !ok { return nil, fmt.Errorf("quitting") } // TODO(roasbeef): Checkpoint? return claimCleanUp(commitSpend) // If it hasn't, then we'll watch for both the expiration, and the // sweeping out this output. default: } // We'll check the current height, if the HTLC has already expired, // then we'll morph immediately into a resolver that can sweep the // HTLC. // // TODO(roasbeef): use grace period instead? _, currentHeight, err := h.ChainIO.GetBestBlock() if err != nil { return nil, err } if uint32(currentHeight) >= h.htlcResolution.Expiry { log.Infof("%T(%v): HTLC has expired (height=%v, expiry=%v), "+ "transforming into timeout resolver", h, h.htlcResolution.ClaimOutpoint) return &h.htlcTimeoutResolver, nil } // If we reach this point, then we can't fully act yet, so we'll await // either of our signals triggering: the HTLC expires, or we learn of // the preimage. blockEpochs, err := h.Notifier.RegisterBlockEpochNtfn() if err != nil { return nil, err } defer blockEpochs.Cancel() for { select { // A new block has arrived, we'll check to see if this leads to // HTLC expiration. case newBlock, ok := <-blockEpochs.Epochs: if !ok { return nil, fmt.Errorf("quitting") } // If this new height expires the HTLC, then we can // exit early and create a resolver that's capable of // handling the time locked output. newHeight := uint32(newBlock.Height) if newHeight >= h.htlcResolution.Expiry-1 { log.Infof("%T(%v): HTLC has expired "+ "(height=%v, expiry=%v), transforming "+ "into timeout resolver", h, h.htlcResolution.ClaimOutpoint, newHeight, h.htlcResolution.Expiry) return &h.htlcTimeoutResolver, nil } // The output has been spent! This means the preimage has been // revealed on-chain. case commitSpend, ok := <-spendNtfn.Spend: if !ok { return nil, fmt.Errorf("quitting") } // The only way this output can be spent by the remote // party is by revealing the preimage. So we'll perform // our duties to clean up the contract once it has been // claimed. return claimCleanUp(commitSpend) case <-h.Quit: return nil, fmt.Errorf("resolver cancelled") } } } // Stop signals the resolver to cancel any current resolution processes, and // suspend. // // NOTE: Part of the ContractResolver interface. func (h *htlcOutgoingContestResolver) Stop() { close(h.Quit) } // IsResolved returns true if the stored state in the resolve is fully // resolved. In this case the target output can be forgotten. // // NOTE: Part of the ContractResolver interface. func (h *htlcOutgoingContestResolver) IsResolved() bool { return h.resolved } // Encode writes an encoded version of the ContractResolver into the passed // Writer. // // NOTE: Part of the ContractResolver interface. func (h *htlcOutgoingContestResolver) Encode(w io.Writer) error { return h.htlcTimeoutResolver.Encode(w) } // Decode attempts to decode an encoded ContractResolver from the passed Reader // instance, returning an active ContractResolver instance. // // NOTE: Part of the ContractResolver interface. func (h *htlcOutgoingContestResolver) Decode(r io.Reader) error { return h.htlcTimeoutResolver.Decode(r) } // AttachResolverKit should be called once a resolved is successfully decoded // from its stored format. This struct delivers a generic tool kit that // resolvers need to complete their duty. // // NOTE: Part of the ContractResolver interface. func (h *htlcOutgoingContestResolver) AttachResolverKit(r ResolverKit) { h.ResolverKit = r } // A compile time assertion to ensure htlcOutgoingContestResolver meets the // ContractResolver interface. var _ ContractResolver = (*htlcOutgoingContestResolver)(nil) // htlcIncomingContestResolver is a ContractResolver that's able to resolve an // incoming HTLC that is still contested. An HTLC is still contested, if at the // time of commitment broadcast, we don't know of the preimage for it yet, and // it hasn't expired. In this case, we can resolve the HTLC if we learn of the // preimage, otherwise the remote party will sweep it after it expires. // // TODO(roasbeef): just embed the other resolver? type htlcIncomingContestResolver struct { // htlcExpiry is the absolute expiry of this incoming HTLC. We use this // value to determine if we can exit early as if the HTLC times out, // before we learn of the preimage then we can't claim it on chain // successfully. htlcExpiry uint32 // htlcSuccessResolver is the inner resolver that may be utilized if we // learn of the preimage. htlcSuccessResolver } // Resolve attempts to resolve this contract. As we don't yet know of the // preimage for the contract, we'll wait for one of two things to happen: // // 1. We learn of the preimage! In this case, we can sweep the HTLC incoming // and ensure that if this was a multi-hop HTLC we are made whole. In this // case, an additional ContractResolver will be returned to finish the // job. // // 2. The HTLC expires. If this happens, then the contract is fully resolved // as we have no remaining actions left at our disposal. // // NOTE: Part of the ContractResolver interface. func (h *htlcIncomingContestResolver) Resolve() (ContractResolver, error) { // If we're already full resolved, then we don't have anything further // to do. if h.resolved { return nil, nil } // We'll first check if this HTLC has been timed out, if so, we can // return now and mark ourselves as resolved. _, currentHeight, err := h.ChainIO.GetBestBlock() if err != nil { return nil, err } // If we're past the point of expiry of the HTLC, then at this point // the sender can sweep it, so we'll end our lifetime. if uint32(currentHeight) >= h.htlcExpiry { // TODO(roasbeef): should also somehow check if outgoing is // resolved or not // * may need to hook into the circuit map // * can't timeout before the outgoing has been log.Infof("%T(%v): HTLC has timed out (expiry=%v, height=%v), "+ "abandoning", h, h.htlcResolution.ClaimOutpoint, h.htlcExpiry, currentHeight) h.resolved = true return nil, h.Checkpoint(h) } // applyPreimage is a helper function that will populate our internal // resolver with the preimage we learn of. This should be called once // the preimage is revealed so the inner resolver can properly complete // its duties. applyPreimage := func(preimage []byte) { copy(h.htlcResolution.Preimage[:], preimage) log.Infof("%T(%v): extracted preimage=%x from beacon!", h, h.htlcResolution.ClaimOutpoint, preimage[:]) // If this our commitment transaction, then we'll need to // populate the witness for the second-level HTLC transaction. if h.htlcResolution.SignedSuccessTx != nil { // Within the witness for the success transaction, the // preimage is the 4th element as it looks like: // // * // // We'll populate it within the witness, as since this // was a "contest" resolver, we didn't yet know of the // preimage. h.htlcResolution.SignedSuccessTx.TxIn[0].Witness[3] = preimage[:] } copy(h.htlcResolution.Preimage[:], preimage[:]) } // If the HTLC hasn't yet expired, then we'll query to see if we // already know the preimage. preimage, ok := h.PreimageDB.LookupPreimage(h.payHash[:]) if ok { // If we do, then this means we can claim the HTLC! However, // we don't know how to ourselves, so we'll return our inner // resolver which has the knowledge to do so. applyPreimage(preimage[:]) return &h.htlcSuccessResolver, nil } // If the HTLC hasn't expired yet, then we may still be able to claim // it if we learn of the pre-image, so we'll wait and see if it pops // up, or the HTLC times out. preimageSubscription := h.PreimageDB.SubscribeUpdates() blockEpochs, err := h.Notifier.RegisterBlockEpochNtfn() if err != nil { return nil, err } defer func() { preimageSubscription.CancelSubscription() blockEpochs.Cancel() }() for { select { case preimage := <-preimageSubscription.WitnessUpdates: // If this isn't our preimage, then we'll continue // onwards. newHash := sha256.Sum256(preimage) preimageMatches := bytes.Equal(newHash[:], h.payHash[:]) if !preimageMatches { continue } // Otherwise, we've learned of the preimage! We'll add // this information to our inner resolver, then return // it so it can continue contract resolution. applyPreimage(preimage) return &h.htlcSuccessResolver, nil case newBlock, ok := <-blockEpochs.Epochs: if !ok { return nil, fmt.Errorf("quitting") } // If this new height expires the HTLC, then this means // we never found out the preimage, so we can mark // resolved and // exit. newHeight := uint32(newBlock.Height) if newHeight >= h.htlcExpiry { log.Infof("%T(%v): HTLC has timed out "+ "(expiry=%v, height=%v), abandoning", h, h.htlcResolution.ClaimOutpoint, h.htlcExpiry, currentHeight) h.resolved = true return nil, h.Checkpoint(h) } case <-h.Quit: return nil, fmt.Errorf("resolver stopped") } } } // Stop signals the resolver to cancel any current resolution processes, and // suspend. // // NOTE: Part of the ContractResolver interface. func (h *htlcIncomingContestResolver) Stop() { close(h.Quit) } // IsResolved returns true if the stored state in the resolve is fully // resolved. In this case the target output can be forgotten. // // NOTE: Part of the ContractResolver interface. func (h *htlcIncomingContestResolver) IsResolved() bool { return h.resolved } // Encode writes an encoded version of the ContractResolver into the passed // Writer. // // NOTE: Part of the ContractResolver interface. func (h *htlcIncomingContestResolver) Encode(w io.Writer) error { // We'll first write out the one field unique to this resolver. if err := binary.Write(w, endian, h.htlcExpiry); err != nil { return err } // Then we'll write out our internal resolver. return h.htlcSuccessResolver.Encode(w) } // Decode attempts to decode an encoded ContractResolver from the passed Reader // instance, returning an active ContractResolver instance. // // NOTE: Part of the ContractResolver interface. func (h *htlcIncomingContestResolver) Decode(r io.Reader) error { // We'll first read the one field unique to this resolver. if err := binary.Read(r, endian, &h.htlcExpiry); err != nil { return err } // Then we'll decode our internal resolver. return h.htlcSuccessResolver.Decode(r) } // AttachResolverKit should be called once a resolved is successfully decoded // from its stored format. This struct delivers a generic tool kit that // resolvers need to complete their duty. // // NOTE: Part of the ContractResolver interface. func (h *htlcIncomingContestResolver) AttachResolverKit(r ResolverKit) { h.ResolverKit = r } // A compile time assertion to ensure htlcIncomingContestResolver meets the // ContractResolver interface. var _ ContractResolver = (*htlcIncomingContestResolver)(nil) // commitSweepResolver is a resolver that will attempt to sweep the commitment // output paying to us, in the case that the remote party broadcasts their // version of the commitment transaction. We can sweep this output immediately, // as it doesn't have a time-lock delay. type commitSweepResolver struct { // commitResolution contains all data required to successfully sweep // this HTLC on-chain. commitResolution lnwallet.CommitOutputResolution // resolved reflects if the contract has been fully resolved or not. resolved bool // broadcastHeight is the height that the original contract was // broadcast to the main-chain at. We'll use this value to bound any // historical queries to the chain for spends/confirmations. broadcastHeight uint32 // chanPoint is the channel point of the original contract. chanPoint wire.OutPoint // sweepTx is the fully signed transaction which when broadcast, will // sweep the commitment output into an output under control by the // source wallet. sweepTx *wire.MsgTx ResolverKit } // ResolverKey returns an identifier which should be globally unique for this // particular resolver within the chain the original contract resides within. func (c *commitSweepResolver) ResolverKey() []byte { key := newResolverID(c.commitResolution.SelfOutPoint) return key[:] } // Resolve instructs the contract resolver to resolve the output on-chain. Once // the output has been *fully* resolved, the function should return immediately // with a nil ContractResolver value for the first return value. In the case // that the contract requires further resolution, then another resolve is // returned. // // NOTE: This function MUST be run as a goroutine. func (c *commitSweepResolver) Resolve() (ContractResolver, error) { // If we're already resolved, then we can exit early. if c.resolved { return nil, nil } // First, we'll register for a notification once the commitment output // itself has been confirmed. // // TODO(roasbeef): instead sweep asap if remote commit? yeh commitTXID := c.commitResolution.SelfOutPoint.Hash confNtfn, err := c.Notifier.RegisterConfirmationsNtfn( &commitTXID, 1, c.broadcastHeight, ) if err != nil { return nil, err } log.Debugf("%T(%v): waiting for commit tx to confirm", c, c.chanPoint) select { case _, ok := <-confNtfn.Confirmed: if !ok { return nil, fmt.Errorf("quitting") } case <-c.Quit: return nil, fmt.Errorf("quitting") } // TODO(roasbeef): checkpoint tx confirmed? // We're dealing with our commitment transaction if the delay on the // resolution isn't zero. isLocalCommitTx := c.commitResolution.MaturityDelay != 0 switch { // If the sweep transaction isn't already generated, and the remote // party broadcast the commitment transaction then we'll create it now. case c.sweepTx == nil && !isLocalCommitTx: // Now that the commitment transaction has confirmed, we'll // craft a transaction to sweep this output into the wallet. signDesc := c.commitResolution.SelfOutputSignDesc // First, we'll estimate the total weight so we can compute // fees properly. We'll use a lax estimate, as this output is // in no immediate danger. satWeight, err := c.FeeEstimator.EstimateFeePerWeight(6) if err != nil { return nil, err } log.Debugf("%T(%v): using %v sat/weight for sweep tx", c, c.chanPoint, int64(satWeight)) totalWeight := (&lnwallet.TxWeightEstimator{}). AddP2PKHInput(). AddP2WKHOutput().Weight() totalFees := int64(totalWeight) * int64(satWeight) sweepAmt := signDesc.Output.Value - totalFees c.sweepTx = wire.NewMsgTx(2) c.sweepTx.AddTxIn(&wire.TxIn{ PreviousOutPoint: c.commitResolution.SelfOutPoint, }) sweepAddr, err := c.NewSweepAddr() if err != nil { return nil, err } c.sweepTx.AddTxOut(&wire.TxOut{ PkScript: sweepAddr, Value: sweepAmt, }) // With the transaction fully assembled, we can now generate a // valid witness for the transaction. signDesc.SigHashes = txscript.NewTxSigHashes(c.sweepTx) c.sweepTx.TxIn[0].Witness, err = lnwallet.CommitSpendNoDelay( c.Signer, &signDesc, c.sweepTx, ) if err != nil { return nil, err } log.Infof("%T(%v): sweeping commit output with tx=%v", c, c.chanPoint, spew.Sdump(c.sweepTx)) // Finally, we'll broadcast the sweep transaction to the // network. if err := c.PublishTx(c.sweepTx); err != nil { log.Errorf("%T(%v): unable to publish sweep tx: %v", c, c.chanPoint, err) return nil, err } // With the sweep transaction confirmed, we'll now Checkpoint // our state. if err := c.Checkpoint(c); err != nil { log.Errorf("unable to Checkpoint: %v", err) } // Otherwise, this is our commitment transaction, So we'll obtain the // sweep transaction once the commitment output has been spent. case c.sweepTx == nil && isLocalCommitTx: // Otherwise, if we're dealing with our local commitment // transaction, then the output we need to sweep has been sent // to the nursery for incubation. In this case, we'll wait // until the commitment output has been spent. spendNtfn, err := c.Notifier.RegisterSpendNtfn( &c.commitResolution.SelfOutPoint, c.broadcastHeight, ) if err != nil { return nil, err } log.Infof("%T(%v): waiting for commit output to be swept", c, c.chanPoint) select { case commitSpend, ok := <-spendNtfn.Spend: if !ok { return nil, fmt.Errorf("quitting") } // Once we detect the commitment output has been spent, // we'll extract the spending transaction itself, as we // now consider this to be our sweep transaction. c.sweepTx = commitSpend.SpendingTx log.Infof("%T(%v): commit output swept by txid=%v", c, c.chanPoint, c.sweepTx.TxHash()) if err := c.Checkpoint(c); err != nil { log.Errorf("unable to Checkpoint: %v", err) } case <-c.Quit: return nil, fmt.Errorf("quitting") } } log.Infof("%T(%v): waiting for commit sweep txid=%v conf", c, c.chanPoint, c.sweepTx.TxHash()) // Now we'll wait until the sweeping transaction has been fully // confirmed. Once it's confirmed, we can mark this contract resolved. sweepTXID := c.sweepTx.TxHash() confNtfn, err = c.Notifier.RegisterConfirmationsNtfn( &sweepTXID, 1, c.broadcastHeight, ) if err != nil { return nil, err } select { case confInfo, ok := <-confNtfn.Confirmed: if !ok { return nil, fmt.Errorf("quitting") } log.Infof("ChannelPoint(%v) commit tx is fully resolved, at height: %v", c.chanPoint, confInfo.BlockHeight) case <-c.Quit: return nil, fmt.Errorf("quitting") } // Once the transaction has received a sufficient number of // confirmations, we'll mark ourselves as fully resolved and exit. c.resolved = true return nil, c.Checkpoint(c) } // Stop signals the resolver to cancel any current resolution processes, and // suspend. // // NOTE: Part of the ContractResolver interface. func (c *commitSweepResolver) Stop() { close(c.Quit) } // IsResolved returns true if the stored state in the resolve is fully // resolved. In this case the target output can be forgotten. // // NOTE: Part of the ContractResolver interface. func (c *commitSweepResolver) IsResolved() bool { return c.resolved } // Encode writes an encoded version of the ContractResolver into the passed // Writer. // // NOTE: Part of the ContractResolver interface. func (c *commitSweepResolver) Encode(w io.Writer) error { if err := encodeCommitResolution(w, &c.commitResolution); err != nil { return err } if err := binary.Write(w, endian, c.resolved); err != nil { return err } if err := binary.Write(w, endian, c.broadcastHeight); err != nil { return err } if _, err := w.Write(c.chanPoint.Hash[:]); err != nil { return err } err := binary.Write(w, endian, c.chanPoint.Index) if err != nil { return err } if c.sweepTx != nil { return c.sweepTx.Serialize(w) } return nil } // Decode attempts to decode an encoded ContractResolver from the passed Reader // instance, returning an active ContractResolver instance. // // NOTE: Part of the ContractResolver interface. func (c *commitSweepResolver) Decode(r io.Reader) error { if err := decodeCommitResolution(r, &c.commitResolution); err != nil { return err } if err := binary.Read(r, endian, &c.resolved); err != nil { return err } if err := binary.Read(r, endian, &c.broadcastHeight); err != nil { return err } _, err := io.ReadFull(r, c.chanPoint.Hash[:]) if err != nil { return err } err = binary.Read(r, endian, &c.chanPoint.Index) if err != nil { return err } txBytes, err := ioutil.ReadAll(r) if err != nil { return err } if len(txBytes) == 0 { return nil } txReader := bytes.NewReader(txBytes) tx := &wire.MsgTx{} if err := tx.Deserialize(txReader); err != nil { return nil } c.sweepTx = tx return nil } // AttachResolverKit should be called once a resolved is successfully decoded // from its stored format. This struct delivers a generic tool kit that // resolvers need to complete their duty. // // NOTE: Part of the ContractResolver interface. func (c *commitSweepResolver) AttachResolverKit(r ResolverKit) { c.ResolverKit = r } // A compile time assertion to ensure commitSweepResolver meets the // ContractResolver interface. var _ ContractResolver = (*commitSweepResolver)(nil)