From 12b1f0fffe2317607b4cde3de9f5109554ce24bd Mon Sep 17 00:00:00 2001
From: OrchardPerformance
 <49926376+OrchardPerformance@users.noreply.github.com>
Date: Tue, 14 Feb 2023 16:00:07 +0000
Subject: [PATCH] Update README.md

---
 README.md | 32 +++++---------------------------
 1 file changed, 5 insertions(+), 27 deletions(-)

diff --git a/README.md b/README.md
index 0b9cc97..7aad628 100644
--- a/README.md
+++ b/README.md
@@ -1,28 +1,6 @@
-# Polygonus-M50-M60
+# Polygonus-Universal
+
+Basic pinout for the bosch 88 pin plug intended for universal use.  
+
+## NOT COMPATIBLE WITH ANY PNP APPLICATION  
  
-A stupid attempt to create an 88pin base board by monday.... 
-
-Tasks for after all other pins have been definned:  
-Pin 8 Check engine - LS9
-Pin 11 Throttle angle signal to the ASC - Check signal, copy of TPS?  
-Pin 12 Lambda 2 - Narrow band, Rev 2 job  
-Pin 13 Lambda 1 - Narrow band, Rev 2 job  
-Pin 19 Secondary air pump relay - LS?  Rev 2 job  
-Pin 36 EVAP canister - Low side 10 
-Pin 37 HEGO relay  
-Pin 41 MAF signal - AN11  
-Pin 42 Vehicle Speed - Rev 2 job  
-Pin 46 Ti signal - 12v? Requires pull up but low side triggered  
-Pin 47 Tacho (5v) - Lowside trigger  
-
-  
-Main power switched by SS relay on board so unit is not powered direct from the key.  
-Relicates OEM power feeds.  
-
-VR conditioner on board for crank sensor  
-
-Additional Low sides on the board  
-
-IGBTs on board 
-
-All AC control reserved for a Rev 2 board  
\ No newline at end of file