From 6c49eb1f7685d01c12a9bc19359987ec235fab30 Mon Sep 17 00:00:00 2001
From: OrchardPerformance
 <49926376+OrchardPerformance@users.noreply.github.com>
Date: Mon, 28 Nov 2022 01:00:57 +0000
Subject: [PATCH] Update README.md

---
 README.md | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/README.md b/README.md
index 6b43bf4..052340f 100644
--- a/README.md
+++ b/README.md
@@ -17,10 +17,11 @@ Intended form factor - 80mm x 80mm up to 85mm x 85mm to suit the majority of cas
 
 Current list of parts dropped from Proteus:  
 - 4x lowsides (remove two VNLD5090)  LS 9 - 12 routed to plugs  
-- 2x High Sides () HS 3+4 routed to plugs Resistor network still in place on board  
 - 4x High/low (TC4427)  IGN 9 - 12 removed and routed to pins
 - Knock signal headphone jack  () Line out removed from filtered 1 and 2  
 - Both ETB (TLE9201 only added if vehicle needs )  Removing ETB means routing Dis, Dir and PWM to pins adds 2 pins to total  
-- Both VR (board configured for hall and MAX added if vehicle needs VR, also larger MAX chip can be used)  VR1+ and VR2+ connected to pin, VR- Removed from pins  
+- Both VR (board reconfigured for hall and MAX added if vehicle needs VR, also larger MAX chip can be used)  VR1+ and VR2+ connected to input pins, VR- Removed from pins 
 
 Requirement to route 3.3v and 5v out of board for additional vehicle board equipment  
+
+Added keep alive voltage pin