fome-fw/firmware/controllers/system_fsio.txt

#
# in this file we define system FSIO expressions
#
# system_fsio.txt is input for compile_fsio_file tool, see gen_system_fsio.bat
#
# see http://rusefi.com/wiki/index.php?title=Manual:Flexible_Logic
#
# Jan 19, 2017
# Andrey Belomutskiy, (c) 2012-2017
#

TOO_HOT_LOGIC=coolant > 120

# Combined RPM, CLT and VBATT warning light
COMBINED_WARNING_LIGHT=(rpm > fsio_setting(2)) | ((coolant > fsio_setting(3)) | (vbatt < fsio_setting(4)))

# could be used for simple variable intake geometry setups or warning light or starter block
RPM_ABOVE_USER_SETTING_1=rpm > fsio_setting(1)

RPM_BELOW_USER_SETTING_3=rpm < fsio_setting(3)

# could be used for simple variable intake geometry setups or warning light or starter block
RPM_ABOVE_USER_SETTING_1=rpm > fsio_setting(1)

RPM_ABOVE_USER_SETTING_2=rpm > fsio_setting(2)

RPM_ABOVE_5500_ON_OFF=rpm > 5500

RPM_ABOVE_6000_ON_OFF=rpm > 6000

RPM_ABOVE_1000_SOLENOID_70_DUTY=(rpm > 1000) * 0.7

RPM_ABOVE_2000_SOLENOID_50_DUTY=(rpm > 2000) * 0.5

RPM_ABOVE_6000_SOLENOID_80_DUTY=(rpm > 6000) * 0.8

RPM_BELOW_USER_SETTING_1=rpm < fsio_setting(1)

# starter block using configurable parameter
STARTER_RELAY_LOGIC=rpm < cranking_rpm

BOOST_CONTROLLER=fsio_table (3, rpm, map) / 100

ANALOG_CONDITION=if(fsio_analog_input (0) > 20, 0, 10)
auto-sync 2017-01-19 13:03:23 -08:00			`#`
auto-sync 2017-01-19 14:04:15 -08:00			`# in this file we define system FSIO expressions`
auto-sync 2017-01-19 13:03:23 -08:00			`#`
FSIO progress 2017-06-13 16:39:49 -07:00			`# system_fsio.txt is input for compile_fsio_file tool, see gen_system_fsio.bat`
			`#`
auto-sync 2017-01-19 13:03:23 -08:00			`# see http://rusefi.com/wiki/index.php?title=Manual:Flexible_Logic`
			`#`
			`# Jan 19, 2017`
			`# Andrey Belomutskiy, (c) 2012-2017`
			`#`

invalid CLT sensor handling fix #412 2019-05-31 13:20:33 -07:00			`TOO_HOT_LOGIC=coolant > 120`

COMBINED_WARNING_LIGHT 2017-04-27 10:06:54 -07:00			`# Combined RPM, CLT and VBATT warning light`
COMBINED_WARNING_LIGHT 2017-04-27 10:05:48 -07:00			`COMBINED_WARNING_LIGHT=(rpm > fsio_setting(2)) \| ((coolant > fsio_setting(3)) \| (vbatt < fsio_setting(4)))`
EFI_MAIN_RELAY_CONTROL draft 2017-06-12 15:14:39 -07:00
FSIO progress 2017-06-13 16:39:49 -07:00			`# could be used for simple variable intake geometry setups or warning light or starter block`
			`RPM_ABOVE_USER_SETTING_1=rpm > fsio_setting(1)`

FSIO sync with reality? 2020-09-10 18:38:41 -07:00			`RPM_BELOW_USER_SETTING_3=rpm < fsio_setting(3)`

FSIO progress 2017-06-13 16:39:49 -07:00			`# could be used for simple variable intake geometry setups or warning light or starter block`
better RPM examples 2017-07-14 19:11:04 -07:00			`RPM_ABOVE_USER_SETTING_1=rpm > fsio_setting(1)`

FSIO progress 2017-06-13 16:39:49 -07:00			`RPM_ABOVE_USER_SETTING_2=rpm > fsio_setting(2)`

better RPM examples 2017-07-14 19:11:04 -07:00			`RPM_ABOVE_5500_ON_OFF=rpm > 5500`

			`RPM_ABOVE_6000_ON_OFF=rpm > 6000`

			`RPM_ABOVE_1000_SOLENOID_70_DUTY=(rpm > 1000) * 0.7`

			`RPM_ABOVE_2000_SOLENOID_50_DUTY=(rpm > 2000) * 0.5`

			`RPM_ABOVE_6000_SOLENOID_80_DUTY=(rpm > 6000) * 0.8`

FSIO progress 2017-06-13 16:39:49 -07:00			`RPM_BELOW_USER_SETTING_1=rpm < fsio_setting(1)`

FSIO Starter Block using cranking_rpm 2017-06-14 02:39:00 -07:00			`# starter block using configurable parameter`
Starter relay + Hardcoded 'FSIO' + simulator fix (#1032) * Starter Relay: gui + built-in FSIO impl. * Hardcoded 'FSIO' replacement for RAM-limited boards * fix simulator 2019-11-25 17:08:01 -08:00			`STARTER_RELAY_LOGIC=rpm < cranking_rpm`
FSIO tool table function 2017-08-03 05:06:13 -07:00
			`BOOST_CONTROLLER=fsio_table (3, rpm, map) / 100`
FSIO 2017-08-06 18:12:05 -07:00
Merge remote-tracking branch 'origin/Hellen_fork_point' into master # Conflicts: # firmware/config/boards/common_make.bat # firmware/controllers/algo/engine.cpp # firmware/controllers/system_fsio.txt 2020-09-11 00:59:06 -07:00			`ANALOG_CONDITION=if(fsio_analog_input (0) > 20, 0, 10)`