fome-fw/firmware/console/binary/output_channels.txt

struct_no_prefix ts_outputs_s

bit sd_present
bit isIgnitionEnabledIndicator;
bit isInjectionEnabledIndicator;
bit sd_logging_internal
bit isCylinderCleanupActivated;
bit isFuelPumpOn;
bit isFanOn;
bit isO2HeaterOn;
bit checkEngine;
bit needBurn;

bit sd_msd
bit clutchUpState;
bit clutchDownState;
bit isFan2On
bit unusedb14;
bit brakePedalState;
bit toothLogReady;
bit acSwitchState;
bit isTpsError;
bit isCltError;
bit isMapError;
bit isIatError;
bit acState;
bit isTriggerError;
bit hasCriticalError;
bit isWarnNow;
bit isPedalError;
bit isKnockChipOk;
bit launchTriggered;
bit isTps2Error;
bit isIdleClosedLoop;
bit isIdleCoasting;

uint16_t autoscale RPMValue;;"RPM",1, 0, 0, 0, 0

uint16_t rpmAcceleration;;"RPM/s",1, 0, 0, 0, 0

	uint16_t autoscale speedToRpmRatio;;"value",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint8_t autoscale vehicleSpeedKph;;"kph",1, 0, 0, 0, 0
	uint8_t autoscale internalMcuTemperature;;"deg C",1, 0, 0, 0, 0

	uint16_t autoscale coolant;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 0
	uint16_t autoscale intake;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 0

	uint16_t autoscale auxTemp1;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 0
	uint16_t autoscale auxTemp2;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 0

	uint16_t autoscale TPSValue;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint16_t autoscale throttlePedalPosition;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0

	uint16_t tpsADC;;"ADC", 1, 0, 0, 0, 0
	uint16_t autoscale MAFValue;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0

	uint16_t autoscale massAirFlowValue;;"Kg/h",{1/@@PACK_MULT_MASS_FLOW@@}, 0, 0, 0, 0
	uint16_t autoscale MAPValue;;"kPa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 0
	uint16_t autoscale baroPressure;;"kPa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 0

	uint16_t autoscale lambdaValue;;"",{1/@@PACK_MULT_LAMBDA@@}, 0, 0, 0, 0
	uint8_t autoscale knockRetard;;"deg",{1/10}, 0, 0, 0, 0
	uint8_t unused37;;"",1, 0, 0, 0, 0

	uint16_t autoscale VBatt;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0

	uint16_t autoscale oilPressure;;"kPa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 0
	uint16_t autoscale vvtPositionB1I;;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 0

	uint16_t autoscale chargeAirMass;;"g",{1/1000}, 0, 0, 0, 0
	uint16_t autoscale crankingFuelMs;airmass in mg, 0-65 grams;"ms",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 0

	uint16_t autoscale currentTargetAfr;;"ratio",{1/@@PACK_MULT_AFR@@}, 0, 0, 0, 0
	uint16_t autoscale baseFuel;This is the raw value we take from the fuel map or base fuel algorithm, before the corrections;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 0

	uint16_t autoscale fuelRunning;Total fuel with CLT IAT and TPS acceleration without injector lag corrections per cycle, as pulse per cycle;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 0
	uint16_t autoscale actualLastInjection;Actual last injection time - including all compensation and injection mode;"ms",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 0


	uint8_t autoscale injectorDutyCycle;;"%",{1/2}, 0, 0, 0, 0
	uint8_t autoscale veValue;;"ratio",{1/2}, 0, 0, 0, 0
	uint16_t autoscale injectionOffset;;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 0

	uint16_t autoscale tCharge;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 0

!  Corrections
	uint16_t autoscale injectorLagMs;;"ms",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 0
	uint16_t autoscale iatCorrection;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint16_t autoscale cltCorrection;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint16_t autoscale baroCorrection;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint16_t autoscale currentEnginePhase;;"deg",1, 0, 0, 0, 0
! Wall model AE
	uint16_t autoscale wallFuelAmount;;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 0
	uint16_t autoscale wallFuelCorrection;;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 0

	uint16_t unused76;;"",1, 0, 0, 0, 0
	uint16_t autoscale deltaTps;TPS acceleration enrichment;"ratio",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0

	uint16_t unused80;;"",1, 0, 0, 0, 0
	uint16_t autoscale tpsAccelFuel;;"ms",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 0
! Ignition
	uint16_t autoscale ignitionAdvance;;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 0
	uint16_t autoscale sparkDwellValue;;"ms",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 0

	uint16_t autoscale coilDutyCycle;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
! Idle & ETB
	uint16_t autoscale idleAirValvePosition;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint16_t autoscale etbTarget;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint16_t autoscale etb1DutyCycle;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint16_t autoscale etb1Error;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
! Fuel system
	uint16_t autoscale fuelTankLevel;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0

	uint16_t autoscale totalFuelConsumption;;"grams",1, 0, 0, 0, 0
	uint16_t autoscale fuelFlowRate;;"gram/s",{1/@@PACK_MULT_FUEL_FLOW@@}, 0, 0, 0, 0

! Y axis values for selectable tables
	uint16_t autoscale veTableYAxis;;"%",{1/100}, 0, 0, 0, 0
	uint16_t autoscale afrTableYAxis;;"%",{1/100}, 0, 0, 0, 0

	float autoscale knockLevel;;"Volts", 1, 0, 0, 0, 0

! integration magic: TS requires exact 'seconds' name
	uint32_t autoscale seconds;;"sec", 1, 0, 0, 0, 0
	uint32_t autoscale engineMode;;"em", 1, 0, 0, 0, 0
	uint32_t autoscale firmwareVersion;;"version_f", 1, 0, 0, 0, 0

! todo: this not needed in light of TS_SIGNATURE but rusEFI console still uses it. Need to migrate
! rusEFI console from TS_FILE_VERSION to TS_SIGNATURE :(
	uint32_t autoscale tsConfigVersion;;"", 1, 0, 0, 0, 0


	! These two fields indicate to TS that we'd like to set a particular field to a particular value
	! We use a maintainConstantValue in TS for each field we'd like to set, like this:
	!		maintainConstantValue = tpsMax, { (calibrationMode == 1 ) ? calibrationValue : tpsMax }
	!		maintainConstantValue = tpsMin, { (calibrationMode == 2 ) ? calibrationValue : tpsMin }
	! When the mode is set to a particular value, TS will copy the calibrationValue in to the specified field.
	!
	! With this simple construct, the ECU can send any number of internally computed configuration fields
	! back to TunerStudio, getting around the problem of setting values on the controller without TS's knowledge.
	! The ECU simply has to sequentially set a mode/value, wait briefly, then repeat until all the values
	! it wants to send have been sent.
	float autoscale calibrationValue;;"", 1, 0, 0, 0, 0
	uint8_t autoscale calibrationMode;;"", 1, 0, 0, 0, 0
	uint8_t autoscale padding;;"", 1, 0, 0, 0, 0

	! Values used for load axes for fuel/ign tables
	! These may or may not be the same value, depending on mode
	uint16_t autoscale fuelingLoad;;"%",{1/100}, 0, 0, 0, 0

	uint16_t autoscale ignitionLoad;;"%",{1/100}, 0, 0, 0, 0
! we want a hash of engineMake+engineCode+vehicleName in the log file in order to match TS logs to rusEFI Online tune
	uint16_t autoscale engineMakeCodeNameCrc16;;"crc16",1, 0, 0, 0, 0
! Errors
	uint32_t autoscale totalTriggerErrorCounter;;"counter",1, 0, 0, 0, 0
	uint32_t orderingErrorCounter;;"",1, 0, 0, 0, 0

	uint16_t autoscale warningCounter;;"count",1, 0, 0, 0, 0
	uint16_t autoscale lastErrorCode;;"error",1, 0, 0, 0, 0

	uint16_t[8 iterate] recentErrorCode;;"error", 1, 0, 0, 0, 0

	float autoscale debugFloatField1;;"val", 1, 0, 0, 0, 0
	float autoscale debugFloatField2;;"val", 1, 0, 0, 0, 0
	float autoscale debugFloatField3;;"val", 1, 0, 0, 0, 0
	float autoscale debugFloatField4;;"val", 1, 0, 0, 0, 0
	float autoscale debugFloatField5;;"val", 1, 0, 0, 0, 0
	float autoscale debugFloatField6;;"val", 1, 0, 0, 0, 0
	float autoscale debugFloatField7;;"val", 1, 0, 0, 0, 0

	uint32_t autoscale debugIntField1;;"val", 1, 0, 0, 0, 0
	uint32_t autoscale debugIntField2;;"val", 1, 0, 0, 0, 0
	uint32_t autoscale debugIntField3;;"val", 1, 0, 0, 0, 0
	uint16_t autoscale debugIntField4;;"val", 1, 0, 0, 0, 0
	uint16_t autoscale debugIntField5;;"val", 1, 0, 0, 0, 0

	uint16_t autoscale accelerationX;;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint16_t autoscale accelerationY;;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0

	uint16_t[EGT_CHANNEL_COUNT iterate] egt;;"deg C", 1, 0, 0, 0, 0

	uint16_t autoscale TPS2Value;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0

	uint16_t autoscale rawTps1Primary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0
	uint16_t autoscale rawPpsPrimary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0
	uint16_t autoscale rawClt;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0
	uint16_t autoscale rawIat;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0
	uint16_t autoscale rawOilPressure;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0

	uint16_t autoscale tuneCrc16;;"crc16", 1, 0, 0, 0, 0
	uint8_t autoscale unusedAt246;;"", 1, 0, 0, 0, 0
	uint8_t autoscale tcuCurrentGear;;"gear", 1, 0, 0, 0, 0

	uint16_t autoscale rawPpsSecondary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0

	uint8_t[12 iterate] autoscale knock;;"",1, 0, 0, 0, 0

	uint8_t autoscale tcuDesiredGear;;"gear",1, 0, 0, 0, 0
	uint8_t autoscale flexPercent;;"%",{1/2}, 0, 0, 0, 0

	uint16_t autoscale rawIdlePositionSensor;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0
	uint16_t autoscale rawWastegatePosition;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0

	uint16_t autoscale wastegatePositionSensor;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint16_t autoscale idlePositionSensor;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0

	uint16_t autoscale rawLowFuelPressure;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0
	uint16_t autoscale rawHighFuelPressure;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0

	uint16_t autoscale lowFuelPressure;;"kpa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 0
	uint16_t autoscale highFuelPressure;;"bar",{1/@@PACK_MULT_HIGH_PRESSURE@@}, 0, 0, 0, 0

	uint16_t autoscale targetLambda;;"",{1/@@PACK_MULT_LAMBDA@@}, 0, 0, 0, 0
	uint16_t autoscale AFRValue;;"AFR",{1/@@PACK_MULT_AFR@@}, 0, 0, 0, 0

	uint16_t autoscale VssAcceleration;;"m/s2",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 0
	uint16_t autoscale lambdaValue2;;"",{1/@@PACK_MULT_LAMBDA@@}, 0, 0, 0, 0

	uint16_t autoscale AFRValue2;;"AFR",{1/@@PACK_MULT_AFR@@}, 0, 0, 0, 0
	uint16_t autoscale vvtPositionB1E;;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 0
	uint16_t autoscale vvtPositionB2I;;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 0
	uint16_t autoscale vvtPositionB2E;;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 0

	uint16_t[2 iterate] autoscale fuelPidCorrection;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0

	uint16_t autoscale rawTps1Secondary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0
	uint16_t autoscale rawTps2Primary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0

	uint16_t autoscale rawTps2Secondary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 0
	uint16_t knockCount;;"",1, 0, 0, 0, 0

	uint16_t autoscale accelerationZ;;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint16_t autoscale accelerationRoll;;"",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
	uint16_t autoscale accelerationYaw;;"",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0

	uint8_t[4 iterate] autoscale vvtTargets;;"deg",1, 0, 0, 0, 0
	uint16_t turboSpeed;;"hz",1, 0, 0, 0, 0

! we have some unused bytes to allow compatible TS changes
	uint8_t[20 iterate] unusedAtTheEnd;;"",1, 0, 0, 0, 0

end_struct