mirror of https://github.com/FOME-Tech/fome-fw.git
Auto-generated configs and docs
This commit is contained in:
parent
40dfd1e205
commit
17ca8b204f
|
@ -786,8 +786,9 @@ struct output_channels_s {
|
|||
// kPa
|
||||
// offset 694
|
||||
uint8_t mapPerCylinder[12];
|
||||
// ratio
|
||||
// offset 706
|
||||
uint8_t alignmentFill_at_706[2];
|
||||
scaled_channel<uint16_t, 1000, 1> dwellAccuracyRatio = (uint16_t)0;
|
||||
};
|
||||
static_assert(sizeof(output_channels_s) == 708);
|
||||
static_assert(offsetof(output_channels_s, RPMValue) == 4);
|
||||
|
@ -973,4 +974,5 @@ static_assert(offsetof(output_channels_s, injectorDutyCycleStage2) == 690);
|
|||
static_assert(offsetof(output_channels_s, pad) == 691);
|
||||
static_assert(offsetof(output_channels_s, mapAveragingSamples) == 692);
|
||||
static_assert(offsetof(output_channels_s, mapPerCylinder) == 694);
|
||||
static_assert(offsetof(output_channels_s, dwellAccuracyRatio) == 706);
|
||||
|
||||
|
|
|
@ -136,6 +136,8 @@ case DBG_29:
|
|||
return "DBG_29";
|
||||
case DBG_32:
|
||||
return "DBG_32";
|
||||
case DBG_33:
|
||||
return "DBG_33";
|
||||
case DBG_34:
|
||||
return "DBG_34";
|
||||
case DBG_35:
|
||||
|
@ -160,8 +162,6 @@ case DBG_9:
|
|||
return "DBG_9";
|
||||
case DBG_COMPOSITE_LOG:
|
||||
return "DBG_COMPOSITE_LOG";
|
||||
case DBG_DWELL_METRIC:
|
||||
return "DBG_DWELL_METRIC";
|
||||
case DBG_DYNO_VIEW:
|
||||
return "DBG_DYNO_VIEW";
|
||||
case DBG_ELECTRONIC_THROTTLE_PID:
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.alphax-2chan.1887257412"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.alphax-2chan.1891868358"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.alphax-2chan.1887257412" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.alphax-2chan.1891868358" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",80="C2 - Crank- (hall
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",80="C2 - Crank- (hall)",19="C2/C3 Crank Sensor VR",78="C3 - Crank+ (hall)",8="C7 - CAM Hall/Digital"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.alphax-4chan.4206182693"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.alphax-4chan.4195064999"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.alphax-4chan.4206182693" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.alphax-4chan.4195064999" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",80="C2 - Crank- (hall
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",80="C2 - Crank- (hall)",19="C2/C3 Crank Sensor VR",78="C3 - Crank+ (hall)",8="C7 - CAM Hall/Digital",91="E5/E6 Cam Sensor VR",81="E6 - Cam+ (hall)",9="E7 - Flex"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.alphax-8chan.2181973980"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.alphax-8chan.2192611934"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.alphax-8chan.2181973980" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.alphax-8chan.2192611934" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",8="23A - Hall Input 1
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",8="23A - Hall Input 1",80="30A - Hall Input 2",4="30C - Hall Input 4",81="31A - Hall Input 3",12="8A - Crank VR",91="9A - Cam VR"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.atlas.4234445999"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.atlas.4242168109"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.atlas.4234445999" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.atlas.4242168109" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], "NONE", "INVALID", "PA0", "PA1
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.core48.1249660150"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.core48.1254265204"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.core48.1249660150" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.core48.1254265204" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",54="Digital Input 1 (
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",54="Digital Input 1 (D4)",55="Digital Input 2 (D5)",52="Digital Input 3 (D2)",53="Digital Input 4 (D3)",99="Hall1 (G1)",73="Hall2 (E7)",75="Hall3 (E9)",74="Hall4 (E8)",95="Hall5 (F13)",96="Hall6 (F14)",98="Hall7 (G0)",97="Hall8 (F15)",68="VR1 (E2)",69="VR2 (E3)",70="VR3 (E4)",71="VR4 (E5)"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.core8.1829062965"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.core8.1841009847"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.core8.1829062965" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.core8.1841009847" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",87="Digital Input 1 (
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",87="Digital Input 1 (F5)",86="Digital Input 2 (F4)",85="Digital Input 3 (F3)",84="Digital Input 4 (F2)",83="Digital Input 5 (F1)",82="Digital Input 6 (F0)",72="Digital Input 7 (E6)",47="Digital Input 8 (C13)",68="VR/Hall 1 (E2)",69="VR/Hall 2 (E3)",70="VR/Hall 3 (E4)",71="VR/Hall 4 (E5)"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.f407-discovery.3027027427"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.f407-discovery.3033667681"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.f407-discovery.3027027427" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.f407-discovery.3033667681" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], "NONE", "INVALID", "PA0", "PA1
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.f429-discovery.1428309123"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.f429-discovery.1436326145"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.f429-discovery.1428309123" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.f429-discovery.1436326145" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], "NONE", "INVALID", "PA0", "PA1
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.frankenso_na6.2003870793"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.frankenso_na6.2010020299"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.frankenso_na6.2003870793" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.frankenso_na6.2010020299" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], "NONE", "INVALID", "PA0", "PA1
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.harley81.3703012601"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.harley81.3691618683"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.harley81.3703012601" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.harley81.3691618683" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",88="11 Crank VR-",93=
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",88="11 Crank VR-",93="51 - VSS"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellen-gm-e67.1011575376"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellen-gm-e67.1022736338"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellen-gm-e67.1011575376" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellen-gm-e67.1022736338" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",88="C2-59 - Cam",86="
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",88="C2-59 - Cam",86="C2-63 - Crank"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellen-honda-k.2816123921"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellen-honda-k.2808379795"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellen-honda-k.2816123921" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellen-honda-k.2808379795" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",93="A18 - VSS",90="A2
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",93="A18 - VSS",90="A25 VTT CAM",92="A26 Cam Sync",91="A7 Crankshaft Sensor"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellen-nb1.2718258495"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellen-nb1.2730199229"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellen-nb1.2718258495" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellen-nb1.2730199229" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",93="2D - VSS",8="2H -
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",93="2D - VSS",8="2H - CAM",19="2J - CRANK",78="4B - DIGITAL/FLEX"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellen121nissan.3537828213"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellen121nissan.3529516279"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellen121nissan.3537828213" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellen121nissan.3529516279" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",19="13 - Crank",8="14
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",19="13 - Crank",8="14 - Cam Left",9="33 - Cam Right"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellen121vag.2128475814"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellen121vag.2120428324"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellen121vag.2128475814" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellen121vag.2120428324" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",93="54 - VSS",19="82
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",93="54 - VSS",19="82 - VR",8="86 - CAM1",9="87 - CAM2"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellen128.3585090852"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellen128.3574528166"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellen128.3585090852" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellen128.3574528166" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",5="C24 - PPS1",38="C2
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",5="C24 - PPS1",38="C25 - PPS2",35="E23 - MAP",36="E29 - Coolant Temp",6="E31 - TPS1",18="E34 - TPS2",19="E37 - Crank Input",8="E40 - IN_CAM",37="E45 - IAT",34="E47 - MAF"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellen154hyundai.1095173573"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellen154hyundai.1106892871"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellen154hyundai.1095173573" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellen154hyundai.1106892871" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",9="Cam - K15",8="Cam
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",9="Cam - K15",8="Cam - K62 rev B",87="Cam - K62 rev C",19="Crank - K17 rev B",86="Crank - K17 rev C",93="K40 VSS"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellen72.2761350452"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellen72.2754085046"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellen72.2761350452" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellen72.2754085046" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",93="3T - VSS (D5)",8=
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",93="3T - VSS (D5)",8="3V - CAM (A19)",19="3Y - CRANK (A24)",80="4H - Neutral",81="5C - Digital Input",78="5I - Digital Input"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellen81.136095670"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellen81.144865844"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellen81.136095670" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellen81.144865844" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",19="15 - IN_CRANK (A2
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",19="15 - IN_CRANK (A24)",93="59 - IN_VSS",18="74 - IN_AUX1",38="75 - IN_AUX2",39="76 - IN_AUX3",9="77 - IN_AUX4",8="79 - IN_CAM"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellen88bmw.237285509"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellen88bmw.245001479"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellen88bmw.237285509" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellen88bmw.245001479" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",19="16 - CRANK",8="17
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",19="16 - CRANK",8="17 - CAM"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellenNA6.1506213540"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellenNA6.1501045542"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellenNA6.1506213540" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellenNA6.1501045542" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",93="1M - VSS",85="2L
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",93="1M - VSS",85="2L - Flex Fuel",19="3E - CRANK",8="3G - CAM",78="Digital 1"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.hellenNA8_96.4197872308"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.hellenNA8_96.4203261750"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.hellenNA8_96.4197872308" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.hellenNA8_96.4203261750" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",93="1M - VSS",19="3F
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",93="1M - VSS",19="3F - CRANK",8="3G - CAM",78="4B - DIGITAL/FLEX"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.mre_f4.2997625147"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.mre_f4.2987588793"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.mre_f4.2997625147" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.mre_f4.2987588793" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",5="22 - AN temp 4",3=
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",5="22 - AN temp 4",3="23 - AN temp 2",4="24 - AN temp 3",7="25 - Hall Cam",40="45 - VR/Hall Crank"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4748,6 +4749,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.mre_f7.2997625147"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.mre_f7.2987588793"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.mre_f7.2997625147" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.mre_f7.2987588793" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",5="22 - AN temp 4",3=
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",5="22 - AN temp 4",3="23 - AN temp 2",4="24 - AN temp 3",7="25 - Hall Cam",40="45 - VR/Hall Crank"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4748,6 +4749,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.prometheus_405.1706461459"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.prometheus_405.1695044753"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.prometheus_405.1706461459" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.prometheus_405.1695044753" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], "NONE", "INVALID", "PA0", "PA1
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.prometheus_469.1706461459"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.prometheus_469.1695044753"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.prometheus_469.1706461459" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.prometheus_469.1695044753" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], "NONE", "INVALID", "PA0", "PA1
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.proteus_f4.3754647038"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.proteus_f4.3749019772"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.proteus_f4.3754647038" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.proteus_f4.3749019772" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",40="Digital 1",77="Di
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",40="Digital 1",77="Digital 2",78="Digital 3",80="Digital 4",79="Digital 5",81="Digital 6",73="VR 1",74="VR 2"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.proteus_f7.3754647038"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.proteus_f7.3749019772"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.proteus_f7.3754647038" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.proteus_f7.3749019772" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",40="Digital 1",77="Di
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",40="Digital 1",77="Digital 2",78="Digital 3",80="Digital 4",79="Digital 5",81="Digital 6",73="VR 1",74="VR 2"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.proteus_h7.3754647038"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.proteus_h7.3749019772"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.proteus_h7.3754647038" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.proteus_h7.3749019772" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",40="Digital 1",77="Di
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",40="Digital 1",77="Digital 2",78="Digital 3",80="Digital 4",79="Digital 5",81="Digital 6",73="VR 1",74="VR 2"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.small-can-board.3176026909"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.small-can-board.3186658975"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.small-can-board.3176026909" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.small-can-board.3186658975" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], 0="NONE",80="C2 - Digital Inpu
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], 0="NONE",80="C2 - Digital Input 1",78="C3 - Digital Input 2"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.31.tdg-pdm8.3750520993"
|
||||
signature = "rusEFI (FOME) master.2024.09.02.tdg-pdm8.3744642339"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.31.tdg-pdm8.3750520993" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.09.02.tdg-pdm8.3744642339" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -692,7 +692,7 @@ auxSpeedSensorInputPin1 = bits, U16, 1364, [0:7], "NONE", "INVALID", "PA0", "PA1
|
|||
auxSpeedSensorInputPin2 = bits, U16, 1366, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15"
|
||||
totalGearsCount = scalar, U08, 1368, "", 1, 0, 1, 8, 0
|
||||
injectionTimingMode = bits, U08, 1369, [0:1], "End of injection", "Start of injection", "Center of injection"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
debugMode = bits, U08, 1370, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"
|
||||
fan1ExtraIdle = scalar, U08, 1371, "%", 1, 0, 0, 100, 0
|
||||
uartConsoleSerialSpeed = scalar, U32, 1372, "BPs", 1, 0, 0, 1000000, 0
|
||||
tpsDecelEnleanmentThreshold = scalar, F32, 1376, "roc", 1, 0, 0, 200, 1
|
||||
|
@ -2649,6 +2649,7 @@ mapPerCylinder9 = scalar, U08, 702, "kPa", 1, 0
|
|||
mapPerCylinder10 = scalar, U08, 703, "kPa", 1, 0
|
||||
mapPerCylinder11 = scalar, U08, 704, "kPa", 1, 0
|
||||
mapPerCylinder12 = scalar, U08, 705, "kPa", 1, 0
|
||||
dwellAccuracyRatio = scalar, U16, 706, "ratio", 0.001, 0
|
||||
; total TS size = 708
|
||||
totalFuelCorrection = scalar, F32, 708, "mult", 1, 0
|
||||
running_postCrankingFuelCorrection = scalar, F32, 712, "", 1, 0
|
||||
|
@ -4747,6 +4748,7 @@ entry = mapPerCylinder9, "mapPerCylinder 9", int, "%d"
|
|||
entry = mapPerCylinder10, "mapPerCylinder 10", int, "%d"
|
||||
entry = mapPerCylinder11, "mapPerCylinder 11", int, "%d"
|
||||
entry = mapPerCylinder12, "mapPerCylinder 12", int, "%d"
|
||||
entry = dwellAccuracyRatio, "dwellAccuracyRatio", float, "%.3f"
|
||||
entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f"
|
||||
entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f"
|
||||
entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f"
|
||||
|
|
|
@ -38,7 +38,7 @@ public enum debug_mode_e {
|
|||
DBG_ION,
|
||||
DBG_TLE8888,
|
||||
DBG_32,
|
||||
DBG_DWELL_METRIC,
|
||||
DBG_33,
|
||||
DBG_34,
|
||||
DBG_35,
|
||||
DBG_36,
|
||||
|
|
|
@ -229,6 +229,7 @@ public class Fields {
|
|||
public static final int debug_mode_e_DBG_27 = 27;
|
||||
public static final int debug_mode_e_DBG_29 = 29;
|
||||
public static final int debug_mode_e_DBG_32 = 32;
|
||||
public static final int debug_mode_e_DBG_33 = 33;
|
||||
public static final int debug_mode_e_DBG_34 = 34;
|
||||
public static final int debug_mode_e_DBG_35 = 35;
|
||||
public static final int debug_mode_e_DBG_36 = 36;
|
||||
|
@ -241,7 +242,6 @@ public class Fields {
|
|||
public static final int debug_mode_e_DBG_8 = 8;
|
||||
public static final int debug_mode_e_DBG_9 = 9;
|
||||
public static final int debug_mode_e_DBG_COMPOSITE_LOG = 40;
|
||||
public static final int debug_mode_e_DBG_DWELL_METRIC = 33;
|
||||
public static final int debug_mode_e_DBG_DYNO_VIEW = 44;
|
||||
public static final int debug_mode_e_DBG_EL_ACCEL = 4;
|
||||
public static final int debug_mode_e_DBG_ELECTRONIC_THROTTLE_PID = 17;
|
||||
|
@ -1205,7 +1205,7 @@ public class Fields {
|
|||
public static final int TS_RESPONSE_UNDERRUN = 0x80;
|
||||
public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
|
||||
public static final char TS_SET_LOGGER_SWITCH = 'l';
|
||||
public static final String TS_SIGNATURE = "rusEFI (FOME) master.2024.08.31.f407-discovery.3027027427";
|
||||
public static final String TS_SIGNATURE = "rusEFI (FOME) master.2024.09.02.f407-discovery.3033667681";
|
||||
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
|
||||
public static final int TS_TOTAL_OUTPUT_SIZE = 1292;
|
||||
public static final String TS_TRIGGER_SCOPE_CHANNEL_1_NAME = "Channel 1";
|
||||
|
@ -1881,7 +1881,7 @@ public class Fields {
|
|||
public static final Field AUXSPEEDSENSORINPUTPIN2 = Field.create("AUXSPEEDSENSORINPUTPIN2", 1366, FieldType.INT16, brain_input_pin_e).setScale(1.0).setBaseOffset(0);
|
||||
public static final Field TOTALGEARSCOUNT = Field.create("TOTALGEARSCOUNT", 1368, FieldType.INT8).setScale(1.0).setBaseOffset(0);
|
||||
public static final Field INJECTIONTIMINGMODE = Field.create("INJECTIONTIMINGMODE", 1369, FieldType.INT8).setScale(1.0).setBaseOffset(0);
|
||||
public static final String[] debug_mode_e = {"INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"};
|
||||
public static final String[] debug_mode_e = {"INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INVALID", "INVALID", "Status", "INVALID", "INVALID", "INVALID", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "INVALID", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua"};
|
||||
public static final Field DEBUGMODE = Field.create("DEBUGMODE", 1370, FieldType.INT8, debug_mode_e).setScale(1.0).setBaseOffset(0);
|
||||
public static final Field FAN1EXTRAIDLE = Field.create("FAN1EXTRAIDLE", 1371, FieldType.INT8).setScale(1.0).setBaseOffset(0);
|
||||
public static final Field UARTCONSOLESERIALSPEED = Field.create("UARTCONSOLESERIALSPEED", 1372, FieldType.INT).setScale(1.0).setBaseOffset(0);
|
||||
|
|
|
@ -534,5 +534,5 @@ public class TsOutputs {
|
|||
public static final Field MAPPERCYLINDER10 = Field.create("MAPPERCYLINDER10", 703, FieldType.INT8).setScale(1.0).setBaseOffset(0);
|
||||
public static final Field MAPPERCYLINDER11 = Field.create("MAPPERCYLINDER11", 704, FieldType.INT8).setScale(1.0).setBaseOffset(0);
|
||||
public static final Field MAPPERCYLINDER12 = Field.create("MAPPERCYLINDER12", 705, FieldType.INT8).setScale(1.0).setBaseOffset(0);
|
||||
public static final Field ALIGNMENTFILL_AT_706 = Field.create("ALIGNMENTFILL_AT_706", 706, FieldType.INT8).setScale(1.0).setBaseOffset(0);
|
||||
public static final Field DWELLACCURACYRATIO = Field.create("DWELLACCURACYRATIO", 706, FieldType.INT16).setScale(0.001).setBaseOffset(0);
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue