remove mock adc (#3888)

* remove mock adc

* do these do /anything/?

firmware/config/stm32f4ems/efifeatures.h

@@ -54,11 +54,6 @@
  #define EFI_ENABLE_ASSERTS TRUE
 #endif /* EFI_ENABLE_ASSERTS */
 
-#if !defined(EFI_ENABLE_MOCK_ADC)
- #define EFI_ENABLE_MOCK_ADC TRUE
-#endif /* EFI_ENABLE_MOCK_ADC */
-
-
 //#define EFI_UART_ECHO_TEST_MODE TRUE
 
 /**

firmware/controllers/algo/engine2.cpp

@@ -56,20 +56,6 @@ bool WarningCodeState::isWarningNow(efitimesec_t now, bool forIndicator) const {
 	return absI(now - timeOfPreviousWarning) < period;
 }
 
-MockAdcState::MockAdcState() {
-	memset(hasMockAdc, 0, sizeof(hasMockAdc));
-}
-
-#if EFI_ENABLE_MOCK_ADC
-void MockAdcState::setMockVoltage(int hwChannel, float voltage) {
-	efiAssertVoid(OBD_PCM_Processor_Fault, hwChannel >= 0 && hwChannel < MOCK_ADC_SIZE, "hwChannel out of bounds");
-	efiPrintf("fake voltage: channel %d value %.2f", hwChannel, voltage);
-
-	fakeAdcValues[hwChannel] = voltsToAdc(voltage);
-	hasMockAdc[hwChannel] = true;
-}
-#endif /* EFI_ENABLE_MOCK_ADC */
-
 void FuelConsumptionState::consumeFuel(float grams, efitick_t nowNt) {
 	m_consumedGrams += grams;
 
@@ -206,14 +192,6 @@ void EngineState::updateTChargeK(int rpm, float tps) {
 #endif
 }
 
-SensorsState::SensorsState() {
-}
-
-int MockAdcState::getMockAdcValue(int hwChannel) const {
-	efiAssert(OBD_PCM_Processor_Fault, hwChannel >= 0 && hwChannel < MOCK_ADC_SIZE, "hwChannel out of bounds", -1);
-	return fakeAdcValues[hwChannel];
-}
-
 #if EFI_SIMULATOR
 #define VCS_VERSION "123"
 #endif

firmware/controllers/algo/engine_parts.h

@@ -12,18 +12,7 @@
 
 #define MOCK_ADC_SIZE 26
 
-class MockAdcState {
+struct Accelerometer {
-public:
-	MockAdcState();
-	bool hasMockAdc[MOCK_ADC_SIZE];
-	int fakeAdcValues[MOCK_ADC_SIZE];
-
-	void setMockVoltage(int hwChannel, float voltage);
-	int getMockAdcValue(int hwChannel) const;
-};
-
-class Accelerometer {
-public:
 	float x = 0; // G value
 	float y = 0;
 	float z = 0;
@@ -31,10 +20,7 @@ public:
 	float roll = 0;
 };
 
-class SensorsState {
+struct SensorsState {
-public:
-	SensorsState();
-
 	Accelerometer accelerometer;
 };
 

firmware/controllers/algo/engine_state.h

@@ -80,10 +80,6 @@ public:
 
 	angle_t injectionOffset = 0;
 
-#if EFI_ENABLE_MOCK_ADC
-	MockAdcState mockAdcState;
-#endif /* EFI_ENABLE_MOCK_ADC */
-
 	multispark_state multispark;
 
 	float targetLambda = 0.0f;

firmware/controllers/engine_controller.h

@@ -19,12 +19,4 @@ void initDataStructures();
 
 void slowStartStopButtonCallback();
 
-#if EFI_ENABLE_MOCK_ADC
-void setMockVoltage(int hwChannel, float voltage);
-#endif
-
-void setMockMapVoltage(float voltage);
-void setMockAfrVoltage(float voltage);
-void setMockMafVoltage(float voltage);
-
 void printCurrentState(Logging *logging, int seconds, const char *engineTypeName, const char *firmwareBuildId);

firmware/controllers/engine_controller_misc.cpp

@@ -36,29 +36,6 @@ void irqExitHook() {}
 void contextSwitchHook() {}
 #endif /* ENABLE_PERF_TRACE */
 
-#if EFI_ENABLE_MOCK_ADC
-/**
- * in 2021 the api is Sensor::setMockValue
- * todo: remove this mockAdcState https://github.com/rusefi/rusefi/issues/3672
- */
-void setMockVoltage(int hwChannel, float voltage) {
-	engine->engineState.mockAdcState.setMockVoltage(hwChannel, voltage);
-}
-
-// used by HW CI testing
-void setMockMafVoltage(float voltage) {
-	setMockVoltage(engineConfiguration->mafAdcChannel, voltage);
-}
-
-void setMockAfrVoltage(float voltage) {
-	setMockVoltage(engineConfiguration->afr.hwChannel, voltage);
-}
-
-void setMockMapVoltage(float voltage) {
-	setMockVoltage(engineConfiguration->map.sensor.hwChannel, voltage);
-}
-#endif /* EFI_ENABLE_MOCK_ADC */
-
 #if !EFI_UNIT_TEST
 /**
  * 64-bit result would not overflow, but that's complex stuff for our 32-bit MCU

firmware/hw_layer/adc/adc_inputs.cpp

@@ -185,11 +185,6 @@ int getInternalAdcValue(const char *msg, adc_channel_e hwChannel) {
 		warning(CUSTOM_OBD_ANALOG_INPUT_NOT_CONFIGURED, "ADC: %s input is not configured", msg);
 		return -1;
 	}
-#if EFI_ENABLE_MOCK_ADC
-	if (engine->engineState.mockAdcState.hasMockAdc[hwChannel])
-		return engine->engineState.mockAdcState.getMockAdcValue(hwChannel);
-
-#endif /* EFI_ENABLE_MOCK_ADC */
 
 #if EFI_USE_FAST_ADC
 	if (adcHwChannelEnabled[hwChannel] == ADC_FAST) {

simulator/simulator/boards.cpp

@@ -12,7 +12,7 @@
 #include "adc_math.h"
 
 int getAdcValue(const char *msg, int hwChannel) {
-	return engine->engineState.mockAdcState.getMockAdcValue(hwChannel);
+	return 0;
 }
 
 // voltage in MCU universe, from zero to VDD

simulator/simulator/efifeatures.h

@@ -13,7 +13,6 @@
 
 #define EFI_ENABLE_ASSERTS TRUE
 #define EFI_LAUNCH_CONTROL TRUE
-#define EFI_ENABLE_MOCK_ADC TRUE
 
 #define ENABLE_PERF_TRACE FALSE
 

unit_tests/boards.cpp

@@ -9,19 +9,14 @@
 
 #include "boards.h"
 
-// see setMockVoltage
 float getVoltageDivided(const char *msg, adc_channel_e hwChannel) {
-	return adcToVolts(engine->engineState.mockAdcState.getMockAdcValue(hwChannel));;
+	return 0;
 }
 
 float getVoltage(const char *msg, adc_channel_e hwChannel) {
-	if (engine->engineState.mockAdcState.hasMockAdc[hwChannel])
-		return adcToVolts(engine->engineState.mockAdcState.getMockAdcValue(hwChannel) * engineConfiguration->analogInputDividerCoefficient);
 	return 0;
 }
 
 int getAdcValue(const char *msg, adc_channel_e hwChannel) {
 	return 0;
 }
-
-

unit_tests/efifeatures.h

@@ -35,8 +35,6 @@
 
 #define SPARK_EXTREME_LOGGING TRUE
 
-#define EFI_ENABLE_MOCK_ADC TRUE
-
 #define EFI_ENABLE_CRITICAL_ENGINE_STOP TRUE
 #define EFI_ENABLE_ENGINE_WARNING TRUE
 

unit_tests/engine_test_helper.cpp

@@ -114,9 +114,6 @@ EngineTestHelper::EngineTestHelper(engine_type_e engineType, configuration_callb
 
 	commonInitEngineController();
 
-	engineConfiguration->mafAdcChannel = EFI_ADC_10;
-	engine.engineState.mockAdcState.setMockVoltage(EFI_ADC_10, 0);
-
 	// this is needed to have valid CLT and IAT.
 //todo: reuse 	initPeriodicEvents() method
 	engine.periodicSlowCallback();

unit_tests/tests/ignition_injection/test_fuel_map.cpp

@@ -58,7 +58,6 @@ TEST(misc, testFuelMap) {
 
 
 	engineConfiguration->mafAdcChannel = EFI_ADC_10;
-	engine->engineState.mockAdcState.setMockVoltage(EFI_ADC_10, 5);
 
 	// 1005 * 2 for IAT correction
 	printf("*************************************************** getRunningFuel 2\r\n");
@@ -68,8 +67,6 @@ TEST(misc, testFuelMap) {
 	EXPECT_EQ( 42,  getRunningFuel(1)) << "v1";
 	EXPECT_EQ( 84,  getRunningFuel(2)) << "v1";
 
-	engine->engineState.mockAdcState.setMockVoltage(EFI_ADC_10, 0);
-
 	engineConfiguration->cranking.baseFuel = 4000;
 
 	// Should use 20 degree correction in case of failed sensor