ETB bias curve in TS

firmware/controllers/algo/engine_configuration.cpp

@@ -342,7 +342,8 @@ void prepareVoidConfiguration(engine_configuration_s *engineConfiguration) {
 	setDefaultAlternatorParameters();
 #endif
 #if EFI_ELECTRONIC_THROTTLE_BODY || defined(__DOXYGEN__)
-	setDefaultEtbParameters();
+	setDefaultEtbParameters(PASS_ENGINE_PARAMETER_SIGNATURE);
+	setDefaultEtbBiasCurve(PASS_ENGINE_PARAMETER_SIGNATURE);
 #endif
 #if EFI_IDLE_CONTROL || defined(__DOXYGEN__)
 	setDefaultIdleParameters();

firmware/controllers/electronic_throttle.cpp

@@ -321,6 +321,26 @@ static void setAutoOffset(int offset) {
 	autoTune.reset();
 }
 
+void setDefaultEtbBiasCurve(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
+	engineConfiguration->etbBiasBins[0] = 0;
+	engineConfiguration->etbBiasBins[1] = 5;
+	engineConfiguration->etbBiasBins[2] = 7;
+	engineConfiguration->etbBiasBins[3] = 8;
+	engineConfiguration->etbBiasBins[4] = 11;
+	engineConfiguration->etbBiasBins[5] = 98;
+	engineConfiguration->etbBiasBins[6] = 99;
+	engineConfiguration->etbBiasBins[7] = 100;
+
+	engineConfiguration->etbBiasValues[0] = -100 / 255.0f * 100;
+	engineConfiguration->etbBiasValues[1] = -95 / 255.0f * 100;
+	engineConfiguration->etbBiasValues[2] = -80 / 255.0f * 100;
+	engineConfiguration->etbBiasValues[3] = 0 / 255.0f * 100;
+	engineConfiguration->etbBiasValues[4] = 115 / 255.0f * 100;
+	engineConfiguration->etbBiasValues[5] = 142 / 255.0f * 100;
+	engineConfiguration->etbBiasValues[6] = 142 / 255.0f * 100;
+	engineConfiguration->etbBiasValues[7] = 142 / 255.0f * 100;
+}
+
 void initElectronicThrottle(void) {
 	addConsoleAction("ethinfo", showEthInfo);
 	if (!hasPedalPositionSensor()) {

firmware/controllers/electronic_throttle.h

@@ -10,7 +10,8 @@
 
 #include "engine.h"
 void initElectronicThrottle(void);
-void setDefaultEtbParameters(void);
+void setDefaultEtbBiasCurve(DECLARE_ENGINE_PARAMETER_SIGNATURE);
+void setDefaultEtbParameters(DECLARE_ENGINE_PARAMETER_SIGNATURE);
 void setEtbPFactor(float value);
 void setEtbIFactor(float value);
 void setEtbDFactor(float value);

firmware/controllers/engine_controller.cpp

@@ -736,5 +736,5 @@ int getRusEfiVersion(void) {
 	if (initBootloader() != 0)
 		return 123;
 #endif /* EFI_BOOTLOADER_INCLUDE_CODE */
-	return 20181208;
+	return 20181209;
 }

firmware/flash_erase.bat

@@ -1,7 +1,7 @@
 rem st-link_cli -c SWD ur -ME
 rem 0x100000 would erase both code and configuration
 rem use 0x080000 if you want to erase only configuratio
-echo I am flash_erase_new_board.bat
+echo I am flash_erase.bat
 
 rem weird, it used to be much nicer with openocd 0.8.0, file location was not broken?
 rem maybe https://sourceforge.net/p/openocd/tickets/105/ ?
@@ -16,7 +16,7 @@ if not exist openocd/openocd.exe exit -1
 
 rem newer discovery boards
 echo Invoking openocd...
-openocd\openocd.exe -f openocd/stm32f429disc1.cfg -c init -c targets -c "halt" -c "flash erase_address 0x08000000 0x0100000" -c shutdown
+openocd\openocd.exe -f openocd/stm32f4discovery.cfg -c init -c targets -c "halt" -c "flash erase_address 0x08000000 0x0100000" -c shutdown
 echo Just invoked openocd!
 
 

firmware/integration/rusefi_config.txt

@@ -928,7 +928,7 @@ tChargeMode_e tChargeMode;
 	
 	
 		uint8_t[ETB_BIAS_CURVE_LENGTH] etbBiasBins;target TPS value, 0 to 100%;"target TPS position",   1,   0.0,        0,  100.0,   0
-		float[ETB_BIAS_CURVE_LENGTH] etbBiasValues;PWM bias, 0 to 100%;"ETB duty cycle bias",   1,   0.0,        0,  100.0,   2
+		float[ETB_BIAS_CURVE_LENGTH] etbBiasValues;PWM bias, 0 to 100%;"ETB duty cycle bias",   1,   0.0,        -100,  100.0,   2
 	
 	int[581] unusedEnd;
 	

firmware/svnversion.h

@@ -1,5 +1,5 @@
 // This file was generated by Version2Header
-// Wed Nov 21 21:00:21 EST 2018
+// Sun Dec 09 13:33:16 EST 2018
 #ifndef VCS_VERSION
-#define VCS_VERSION "15987"
+#define VCS_VERSION "16057"
 #endif

firmware/tunerstudio/rusefi.input

@@ -430,6 +430,14 @@ fileVersion = { 20171101 }
       yBins       = crankingFuelCoef
       gauge       = CLTGauge
 
+	curve = etbTpsBiasCurve, "Electronic TB Bias Curve"
+      columnLabel = "TPS", "duty bias"
+      xAxis       =  0, 100, 10
+      yAxis       =  0,  100, 10
+      xBins       = etbBiasBins, TPSValue
+      yBins       = etbBiasValues
+      gauge       = TPSGauge
+
 	curve = crankingTpsCurve, "Cranking TPS Multiplier"
       columnLabel = "TPS", "Multiplier"
       xAxis       =  0, 100, 10
@@ -998,7 +1006,8 @@ menuDialog = main
 		subMenu = std_separator
 		subMenu = fanSetting,				"Fan Settings"
 		subMenu = malfunction,				"MIL Settings"
-		subMenu = etbDialog,				"Electronic Thtottle Body (alpha version)"
+		subMenu = etbDialog,				"Electronic Thtottle Body (beta version)"
+		subMenu = etbTpsBiasCurve, 			"Electronic Thtottle Body Bias Curve"
 		subMenu = std_separator
 		subMenu = std_realtime,    			"&Realtime Display",              0	
 		
@@ -2153,7 +2162,7 @@ cmd_stop_engine              = "w\x00\x99\x00\x00"
 		topicHelp = "veTableDialogHelp"
 		panel = veTableMap, South
 				
-	dialog = etbDialog, "Electronic Thtottle Body (alpha)"			
+	dialog = etbDialog, "Electronic Thtottle Body (beta)"			
 		field = "verbose",								isVerboseETB
 		field = "Throttle Pedal Up",					throttlePedalUpVoltage
 		field = "Throttle Pedal Wide Open",				throttlePedalWOTVoltage

java_tools/configuration_definition/src/com/rusefi/TypesHelper.java

@@ -36,7 +36,7 @@ public class TypesHelper {
         if (UINT_16_T.equals(type))
             return "U16";
         if (UINT8_T.equals(type))
-            return "U8";
+            return "U08";
         System.out.println("No TS type convesion for " + type);
         return type;
     }