CJ125 unit-tests coverage #617

firmware/controllers/system/pwm_generator_logic.cpp

@@ -301,6 +301,7 @@ void startSimplePwm(SimplePwm *state, const char *msg, ExecutorInterface *execut
 		OutputPin *output, float frequency, float dutyCycle, pwm_gen_callback *stateChangeCallback) {
 	efiAssertVoid(CUSTOM_ERR_6692, state != NULL, "state");
 	efiAssertVoid(CUSTOM_ERR_6665, dutyCycle >= 0 && dutyCycle <= 1, "dutyCycle");
+	efiAssertVoid(CUSTOM_ERR_6693, stateChangeCallback != NULL, "listener");
 	if (frequency < 1) {
 		warning(CUSTOM_OBD_LOW_FREQUENCY, "low frequency %.2f", frequency);
 		return;

firmware/hw_layer/sensors/CJ125.cpp

@@ -29,8 +29,6 @@ EXTERN_ENGINE;
 #include "pin_repository.h"
 extern TunerStudioOutputChannels tsOutputChannels;
 
-static OutputPin wboHeaterPin;
-static OutputPin cj125Cs;
 static Logging *logger;
 static unsigned char tx_buff[2];
 static unsigned char rx_buff[1];
@@ -351,15 +349,6 @@ static void cjStart(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
 #endif
 }
 
-static void cjStartHeaterControl(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
-	scheduleMsg(logger, "cj125: Starting heater control");
-	// todo: use custom pin state method, turn pin off while not running
-	startSimplePwmExt(&globalInstance.wboHeaterControl, "wboHeaterPin",
-			&engine->executor,
-			CONFIGB(wboHeaterPin),
-			&wboHeaterPin, CJ125_HEATER_PWM_FREQ, 0.0f, applyPinState);
-}
-
 void CJ125::setError(cj125_error_e errCode DECLARE_ENGINE_PARAMETER_SUFFIX) {
 	errorCode = errCode;
 	state = CJ125_ERROR;
@@ -411,18 +400,16 @@ void cj125defaultPinout(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
 }
 
 static void cjStartSpi(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
-	cj125Cs.initPin("cj125 CS", CONFIGB(cj125CsPin),
+	globalInstance.cj125Cs.initPin("cj125 CS", CONFIGB(cj125CsPin),
 			&engineConfiguration->cj125CsPinMode);
 	// Idle CS pin - SPI CS is high when idle
-	cj125Cs.setValue(true);
+	globalInstance.cj125Cs.setValue(true);
 
-#if EFI_PROD_CODE
 	cj125spicfg.ssport = getHwPort("cj125", CONFIGB(cj125CsPin));
 	cj125spicfg.sspad = getHwPin("cj125", CONFIGB(cj125CsPin));
 	driver = getSpiDevice(engineConfiguration->cj125SpiDevice);
 	scheduleMsg(logger, "cj125: Starting SPI driver");
 	spiStart(driver, &cj125spicfg);
-#endif /* EFI_PROD_CODE */
 }
 
 /**
@@ -595,11 +582,9 @@ float cjGetAfr(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
 bool cjHasAfrSensor(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
 	if (!CONFIGB(isCJ125Enabled))
 		return false;
-#if ! EFI_UNIT_TEST
 	// check if controller is functioning
 	if (!globalInstance.isWorkingState())
 		return false;
-#endif /* EFI_UNIT_TEST */
 	// check if amplification is turned on
 	if (amplCoeff == 0.0f)
 		return false;
@@ -642,8 +627,8 @@ void initCJ125(Logging *sharedLogger DECLARE_ENGINE_PARAMETER_SUFFIX) {
 
 	cjInitPid(PASS_ENGINE_PARAMETER_SIGNATURE);
 	cjStartSpi(PASS_ENGINE_PARAMETER_SIGNATURE);
-	cjStartHeaterControl(PASS_ENGINE_PARAMETER_SIGNATURE);
+	scheduleMsg(logger, "cj125: Starting heater control");
-	globalInstance.SetIdleHeater(PASS_ENGINE_PARAMETER_SIGNATURE);
+	globalInstance.StartHeaterControl(applyPinState PASS_ENGINE_PARAMETER_SUFFIX);
 	cjStart(PASS_ENGINE_PARAMETER_SIGNATURE);
 	
 #ifdef CJ125_DEBUG

firmware/hw_layer/sensors/CJ125_logic.cpp

@@ -36,3 +36,12 @@ void CJ125::SetIdleHeater(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
 bool CJ125::isWorkingState(void) {
 	return state != CJ125_ERROR && state != CJ125_INIT && state != CJ125_IDLE;
 }
+
+void CJ125::StartHeaterControl(pwm_gen_callback *stateChangeCallback DECLARE_ENGINE_PARAMETER_SUFFIX) {
+	// todo: use custom pin state method, turn pin off while not running
+	startSimplePwmExt(&wboHeaterControl, "wboHeaterPin",
+			&engine->executor,
+			CONFIGB(wboHeaterPin),
+			&wboHeaterPin, CJ125_HEATER_PWM_FREQ, 0.0f, stateChangeCallback);
+	SetIdleHeater(PASS_ENGINE_PARAMETER_SIGNATURE);
+}

firmware/hw_layer/sensors/CJ125_logic.h

@@ -54,6 +54,8 @@ public:
 	efitick_t prevNt;
 	float heaterDuty = 0.0f;
 
+	OutputPin wboHeaterPin;
+	OutputPin cj125Cs;
 
 	// Used by CJ125 driver state machine
 	volatile cj125_state_e state = CJ125_INIT;
@@ -64,6 +66,7 @@ public:
 	bool isWorkingState(void);
 	void SetHeater(float value DECLARE_ENGINE_PARAMETER_SUFFIX);
 	void SetIdleHeater(DECLARE_ENGINE_PARAMETER_SIGNATURE);
+	void StartHeaterControl(pwm_gen_callback *stateChangeCallback DECLARE_ENGINE_PARAMETER_SUFFIX);
 };
 
 // Heater params for Idle(cold), Preheating and Control stages

unit_tests/main.cpp

@@ -50,7 +50,7 @@ GTEST_API_ int main(int argc, char **argv) {
 //	printTriggerDebug = true;
 
 	//	resizeMap();
-	printf("Success 20190117\r\n");
+	printf("Success 20190201\r\n");
 	printAllTriggers();
 //	printConvertedTable();
 	testing::InitGoogleTest(&argc, argv);

unit_tests/tests/test_cj125.cpp

@@ -9,15 +9,23 @@
 #include "CJ125_logic.h"
 #include "engine_test_helper.h"
 
+static void applyHeaterPinState(PwmConfig *state, int stateIndex) {
+
+}
+
 TEST(testCJ125, testInitialState) {
 	CJ125 cj;
 
 	ASSERT_EQ(cj.state, CJ125_INIT);
 	ASSERT_FALSE(cj.isWorkingState());
+	ASSERT_EQ(cj.heaterDuty, 0);
 
 	WITH_ENGINE_TEST_HELPER(FORD_ASPIRE_1996);
 	ASSERT_EQ(engine->sensors.vBatt, 0);
 
+	cj.StartHeaterControl(&applyHeaterPinState PASS_ENGINE_PARAMETER_SUFFIX);
+	ASSERT_EQ(cj.heaterDuty, CJ125_HEATER_IDLE_RATE);
+
 }