From 586bc06f8135524791a1a45ce7a4d245ef0a4249 Mon Sep 17 00:00:00 2001
From: mi-hol <22799428+mi-hol@users.noreply.github.com>
Date: Wed, 14 Feb 2024 00:32:53 +0100
Subject: [PATCH] Create benelli.cpp

---
 firmware/config/engines/benelli.cpp | 137 ++++++++++++++++++++++++++++
 1 file changed, 137 insertions(+)
 create mode 100644 firmware/config/engines/benelli.cpp

diff --git a/firmware/config/engines/benelli.cpp b/firmware/config/engines/benelli.cpp
new file mode 100644
index 0000000000..baebfdcd4e
--- /dev/null
+++ b/firmware/config/engines/benelli.cpp
@@ -0,0 +1,137 @@
+/*
+ * @file benelli.cpp
+ *
+ * set engine_type 33
+ *
+ * @date Feb 13, 2024
+ * @author Michael Holzer, (c) 2024
+*/
+
+#include "pch.h"
+#include "table_helper.h"
+#include "electronic_throttle.h"
+#include "mre_meta.h"
+#include "defaults.h"
+
+#include "benelli.h"
+#include "custom_engine.h"
+
+void setMreConfiguration() {
+	engineConfiguration->afr.hwChannel = MRE_IN_ANALOG_VOLT_10;
+
+	engineConfiguration->tps1_2AdcChannel = MRE_IN_ANALOG_VOLT_9;
+
+
+
+	// EFI_ADC_7: "31 - AN volt 3" - PA7
+	// 36 - AN volt 8
+	setPPSInputs(MRE_IN_ANALOG_VOLT_3, MRE_IN_ANALOG_VOLT_8);
+
+	// "26 - AN volt 2"
+	engineConfiguration->highPressureFuel.hwChannel = MRE_IN_ANALOG_VOLT_2;
+
+
+	// "19 - AN volt 4"
+	engineConfiguration->lowPressureFuel.hwChannel = EFI_ADC_12;
+
+	engineConfiguration->isSdCardEnabled = false;
+
+	engineConfiguration->mc33816spiDevice = SPI_DEVICE_3;
+	// RED
+	engineConfiguration->spi3mosiPin = Gpio::C12;
+	// YELLOW
+	engineConfiguration->spi3misoPin = Gpio::C11;
+	// BROWN
+	engineConfiguration->spi3sckPin = Gpio::C10;
+	engineConfiguration->sdCardCsPin = Gpio::Unassigned;
+	engineConfiguration->is_enabled_spi_3 = true;
+
+
+	// J8 orange
+	engineConfiguration->mc33816_cs = Gpio::B8;
+	// J8 Grey
+	engineConfiguration->mc33816_rstb = Gpio::A15;
+	// J8 Dark BLUE
+	engineConfiguration->mc33816_driven = Gpio::B9;
+	// J9 violet
+	engineConfiguration->mc33816_flag0 = Gpio::C13;
+
+	// J10 Dark BLUE
+	engineConfiguration->injectionPins[0] = Gpio::E6;
+	// J11 green
+	engineConfiguration->injectionPins[1] = Gpio::E5;
+	// J18 grey
+	engineConfiguration->injectionPins[2] = Gpio::B7;
+	// J6 white
+	engineConfiguration->injectionPins[3] = Gpio::E0;
+
+
+	gppwm_channel *lowPressureFuelPumpControl = &engineConfiguration->gppwm[1];
+
+	// "42 - Injector 4", somehow GP4 did not work? not enough current? not happy with diode?
+	lowPressureFuelPumpControl->pin = MRE_INJ_4;
+
+
+	gppwm_channel *coolantControl = &engineConfiguration->gppwm[0];
+
+	coolantControl->pin = MRE_LS_2;
+	// "7 - Lowside 1"
+	//engineConfiguration->hpfpValvePin = MRE_LS_1;
+	engineConfiguration->hpfpValvePin = Gpio::B10; // AUX J13
+
+
+#endif /* HW_MICRO_RUSEFI */
+}
+
+void set_Mre_Benelli_Tre() {
+	setMreConfiguration();
+
+	setWholeTimingTable_d(20);
+	// set cranking_timing_angle 10
+	engineConfiguration->crankingTimingAngle = 10; // ToDo:verify
+
+	// set global_trigger_offset_angle 93
+	engineConfiguration->globalTriggerAngleOffset = 93; // ToDo:verify
+
+
+	setCrankOperationMode();
+	engineConfiguration->trigger.type = trigger_type_e::TT_Benelli_Tre;
+
+	engineConfiguration->mafAdcChannel = EFI_ADC_1; // ToDo:verify
+
+
+	//Base engine setting
+	engineConfiguration->cylindersCount = 3;
+	engineConfiguration->firingOrder = FO_1_2_3; // ToDo:verify
+  engineConfiguration->injector.flow = 320; // 30lb/h // ToDo:verify
+	// set algorithm 3
+	setAlgorithm(LM_SPEED_DENSITY);
+	engineConfiguration->map.sensor.type = MT_GM_3_BAR; // ToDo:verify
+
+	engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS;
+
+	engineConfiguration->ignitionPins[0] = Gpio::E14; // ToDo:verify
+	engineConfiguration->ignitionPins[1] = Gpio::Unassigned;
+	engineConfiguration->ignitionPins[2] = Gpio::Unassigned;
+	engineConfiguration->ignitionPins[3] = Gpio::Unassigned;
+
+	engineConfiguration->wastegatePositionSensor = EFI_ADC_4; // PA4 // ToDo:verify
+
+	float mapRange = 110; // ToDo:verify
+
+	setEgoSensor(ES_PLX); // ToDo:verify
+	setFuelTablesLoadBin(20, mapRange); // ToDo:verify
+	setLinearCurve(config->ignitionLoadBins, 20, mapRange);
+
+	engineConfiguration->isSdCardEnabled = false;
+	engineConfiguration->tpsMin = 0;
+	engineConfiguration->tpsMax = 100;
+}
+
+void set_Benelli_3_cyl_900ccm() {
+	engineConfiguration->displacement = 0.9;
+}
+
+void set_Benelli_3_cyl_1130ccm() {
+  engineConfiguration->displacement = 1.13;
+}