FOME-Tech
/
fome-fw
mirror of https://github.com/FOME-Tech/fome-fw.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

this might do

This commit is contained in:
kon 2020-08-02 11:30:38 -07:00
parent 9dbf9372cb
commit 60b8151cb2
1 changed files with 8 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
firmware/integration/rusefi_config.txt
View File

@ -1102,7 +1102,6 @@ int16_t tps2Max;Full throttle#2. tpsMax value as 10 bit ADC value. Not Voltage!\
float engineLoadAccelEnrichmentMultiplier;;"coeff", 1, 0, 0, 200, 3
uint32_t uartConsoleSerialSpeed;Band rate for primary TTL;"BPs", 1, 0, 0,1000000, 0
float tpsDecelEnleanmentThreshold;;"roc", 1, 0, 0, 200, 3
float tpsDecelEnleanmentMultiplier;;"coeff", 1, 0, 0, 200, 3
@ -1117,20 +1116,22 @@ int16_t tps2Max;Full throttle#2. tpsMax value as 10 bit ADC value. Not Voltage!\
#define can_baudrate_e_enum "100kbps", "250kbps" , "500kbps", "1Mbps"
custom can_baudrate_e 1 bits, U08, @OFFSET@, [0:1], @@can_baudrate_e_enum@@
can_baudrate_e canBaudRate; set can_baudrate
uint8_t un1used_former_warmup_target_afr;;"units", 1, 0, -20, 100, 0
can_baudrate_e can2BaudRate;
uint32_t verboseCan2BaseAddress;;"", 1, 0, 0, 536870911, 0
can_baudrate_e can2BaudRate; set can2_baudrate
bit enableVerboseCan2Tx;+CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast
bit can2ReadEnabled;enable can_read/disable can_read
bit can2WriteEnabled;enable can_write/disable can_write
can_nbc_e can2NbcType;set can_mode X
brain_pin_e can2TxPin;set_can2_tx_pin X
brain_pin_e can2RxPin;set_can2_rx_pin X
uint8_t unused1108;;"units", 1, 0, -20, 100, 0
bit[5] unused1116
uint8_t[3] unused117;;"units", 1, 0, -20, 100, 0
uint32_t[1] unused_former_warmup_target_afr;;"units", 1, 0, -20, 100, 0
brain_pin_e can2RxPin;set_can2_rx_pin X
bit unused1130
bit unused1131
bit unused1132
bit unused1133
bit unused1134
uint8_t[7] unused_former_warmup_target_afr;;"units", 1, 0, -20, 100, 0
float boostCutPressure;kPa value at which we need to cut fuel and spark, 0 if not enabled;"kPa", 1, 0, 0, 500, 0