FOME-Tech
/
fome-fw
mirror of https://github.com/FOME-Tech/fome-fw.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ADC and HIP: feed callback with voltage, not raw adc values (#4939) 

* hip9011: use adcToVoltsDivided() helper

* hip9011: feed callback with volts, not raw adc value
This commit is contained in:
Andrey G 2023-01-05 20:00:23 +03:00 committed by GitHub
parent a69e0db21e
commit 8718ca076e
5 changed files with 14 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
firmware/hw_layer/hardware.cpp
View File

@ -189,7 +189,7 @@ void onFastAdcComplete(adcsample_t*) {
#endif /* EFI_MAP_AVERAGING */
#if EFI_HIP_9011
if (engineConfiguration->isHip9011Enabled) {
hipAdcCallback(getFastAdc(hipSampleIndex));
hipAdcCallback(adcToVoltsDivided(getFastAdc(hipSampleIndex)));
}
#endif /* EFI_HIP_9011 */
}

21
firmware/hw_layer/sensors/hip9011.cpp
View File

@ -311,7 +311,7 @@ void hip9011_onFireEvent(uint8_t cylinderNumber, efitick_t nowNt) {
}
}
void hipAdcCallback(adcsample_t adcValue) {
void hipAdcCallback(float volts) {
/* we read in digital mode */
if (instance.adv_mode)
return;
@ -320,7 +320,9 @@ void hipAdcCallback(adcsample_t adcValue) {
} else if (instance.state == WAITING_FOR_RESULT_ADC) {
/* offload calculations to driver thread */
if (instance.channelIdx < HIP_INPUT_CHANNELS) {
instance.rawValue[instance.channelIdx] = adcValue;
/* normalize to 0..HIP9011_DIGITAL_OUTPUT_MAX */
instance.rawValue[instance.channelIdx] =
volts * HIP9011_DIGITAL_OUTPUT_MAX / HIP9011_ANALOG_OUTPUT_MAX;
}
instance.state = NOT_READY;
hip_wake_driver();
@ -483,19 +485,16 @@ static msg_t hipThread(void *arg) {
/* calculations */
if (instance.adv_mode) {
/* store for debug */
instance.rawValue[idx] = rawValue;
/* convert 10 bit integer value to 0.0 .. 1.0 float */
knockNormalized = ((float)rawValue) / HIP9011_DIGITAL_OUTPUT_MAX;
/* convert to magic volts */
knockVolts = knockNormalized * HIP9011_DESIRED_OUTPUT_VALUE;
} else {
/* get value stored by callback */
rawValue = instance.rawValue[idx];
/* first calculate ouput volts */
knockVolts = adcToVolts(rawValue) * engineConfiguration->analogInputDividerCoefficient;
/* and then normalize */
knockNormalized = knockVolts / HIP9011_DESIRED_OUTPUT_VALUE;
}
/* convert 10 bit integer value to 0.0 .. 1.0 float */
knockNormalized = ((float)rawValue) / HIP9011_DIGITAL_OUTPUT_MAX;
/* convert to magic volts
* TODO: remove conversion to volts */
knockVolts = knockNormalized * HIP9011_ANALOG_OUTPUT_MAX;
/* Check for correct cylinder/input */
if (correctCylinder) {

2
firmware/hw_layer/sensors/hip9011.h
View File

@ -14,7 +14,7 @@ void initHip9011();
void startHip9001_pins();
void stopHip9001_pins();
#if HAL_USE_ADC
void hipAdcCallback(adcsample_t value);
void hipAdcCallback(float volts);
#endif /* HAL_USE_ADC */
void hip9011_onFireEvent(uint8_t cylinderNumber, efitick_t nowNt);

2
firmware/hw_layer/sensors/hip9011_logic.cpp
View File

@ -110,7 +110,7 @@ float HIP9011::getRpmByAngleWindowAndTimeUs(int timeUs, float angleWindowWidth)
/**
* TINT = TC * 2 * PI * VOUT
*/
float integrationTimeUs = timeUs * 2 * CONST_PI * HIP9011_DESIRED_OUTPUT_VALUE;
float integrationTimeUs = timeUs * 2 * CONST_PI * HIP9011_ANALOG_OUTPUT_MAX;
/**
* rpm = 60 seconds / time
* '60000000' because revolutions per MINUTE in uS conversion

2
firmware/hw_layer/sensors/hip9011_logic.h
View File

@ -16,7 +16,7 @@
#endif
#define HIP9011_BAND(bore) (900 / (CONST_PI * (bore) / 2))
#define HIP9011_DESIRED_OUTPUT_VALUE 5.0f
#define HIP9011_ANALOG_OUTPUT_MAX 5.0f
#define HIP9011_DIGITAL_OUTPUT_MAX 0x03ff /* 10 bit max value */
#define HIP_INPUT_CHANNELS 2