diff --git a/firmware/config/engines/benelli.cpp b/firmware/config/engines/benelli.cpp
new file mode 100644
index 0000000000..baebfdcd4e
--- /dev/null
+++ b/firmware/config/engines/benelli.cpp
@@ -0,0 +1,137 @@
+/*
+ * @file benelli.cpp
+ *
+ * set engine_type 33
+ *
+ * @date Feb 13, 2024
+ * @author Michael Holzer, (c) 2024
+*/
+
+#include "pch.h"
+#include "table_helper.h"
+#include "electronic_throttle.h"
+#include "mre_meta.h"
+#include "defaults.h"
+
+#include "benelli.h"
+#include "custom_engine.h"
+
+void setMreConfiguration() {
+	engineConfiguration->afr.hwChannel = MRE_IN_ANALOG_VOLT_10;
+
+	engineConfiguration->tps1_2AdcChannel = MRE_IN_ANALOG_VOLT_9;
+
+
+
+	// EFI_ADC_7: "31 - AN volt 3" - PA7
+	// 36 - AN volt 8
+	setPPSInputs(MRE_IN_ANALOG_VOLT_3, MRE_IN_ANALOG_VOLT_8);
+
+	// "26 - AN volt 2"
+	engineConfiguration->highPressureFuel.hwChannel = MRE_IN_ANALOG_VOLT_2;
+
+
+	// "19 - AN volt 4"
+	engineConfiguration->lowPressureFuel.hwChannel = EFI_ADC_12;
+
+	engineConfiguration->isSdCardEnabled = false;
+
+	engineConfiguration->mc33816spiDevice = SPI_DEVICE_3;
+	// RED
+	engineConfiguration->spi3mosiPin = Gpio::C12;
+	// YELLOW
+	engineConfiguration->spi3misoPin = Gpio::C11;
+	// BROWN
+	engineConfiguration->spi3sckPin = Gpio::C10;
+	engineConfiguration->sdCardCsPin = Gpio::Unassigned;
+	engineConfiguration->is_enabled_spi_3 = true;
+
+
+	// J8 orange
+	engineConfiguration->mc33816_cs = Gpio::B8;
+	// J8 Grey
+	engineConfiguration->mc33816_rstb = Gpio::A15;
+	// J8 Dark BLUE
+	engineConfiguration->mc33816_driven = Gpio::B9;
+	// J9 violet
+	engineConfiguration->mc33816_flag0 = Gpio::C13;
+
+	// J10 Dark BLUE
+	engineConfiguration->injectionPins[0] = Gpio::E6;
+	// J11 green
+	engineConfiguration->injectionPins[1] = Gpio::E5;
+	// J18 grey
+	engineConfiguration->injectionPins[2] = Gpio::B7;
+	// J6 white
+	engineConfiguration->injectionPins[3] = Gpio::E0;
+
+
+	gppwm_channel *lowPressureFuelPumpControl = &engineConfiguration->gppwm[1];
+
+	// "42 - Injector 4", somehow GP4 did not work? not enough current? not happy with diode?
+	lowPressureFuelPumpControl->pin = MRE_INJ_4;
+
+
+	gppwm_channel *coolantControl = &engineConfiguration->gppwm[0];
+
+	coolantControl->pin = MRE_LS_2;
+	// "7 - Lowside 1"
+	//engineConfiguration->hpfpValvePin = MRE_LS_1;
+	engineConfiguration->hpfpValvePin = Gpio::B10; // AUX J13
+
+
+#endif /* HW_MICRO_RUSEFI */
+}
+
+void set_Mre_Benelli_Tre() {
+	setMreConfiguration();
+
+	setWholeTimingTable_d(20);
+	// set cranking_timing_angle 10
+	engineConfiguration->crankingTimingAngle = 10; // ToDo:verify
+
+	// set global_trigger_offset_angle 93
+	engineConfiguration->globalTriggerAngleOffset = 93; // ToDo:verify
+
+
+	setCrankOperationMode();
+	engineConfiguration->trigger.type = trigger_type_e::TT_Benelli_Tre;
+
+	engineConfiguration->mafAdcChannel = EFI_ADC_1; // ToDo:verify
+
+
+	//Base engine setting
+	engineConfiguration->cylindersCount = 3;
+	engineConfiguration->firingOrder = FO_1_2_3; // ToDo:verify
+  engineConfiguration->injector.flow = 320; // 30lb/h // ToDo:verify
+	// set algorithm 3
+	setAlgorithm(LM_SPEED_DENSITY);
+	engineConfiguration->map.sensor.type = MT_GM_3_BAR; // ToDo:verify
+
+	engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS;
+
+	engineConfiguration->ignitionPins[0] = Gpio::E14; // ToDo:verify
+	engineConfiguration->ignitionPins[1] = Gpio::Unassigned;
+	engineConfiguration->ignitionPins[2] = Gpio::Unassigned;
+	engineConfiguration->ignitionPins[3] = Gpio::Unassigned;
+
+	engineConfiguration->wastegatePositionSensor = EFI_ADC_4; // PA4 // ToDo:verify
+
+	float mapRange = 110; // ToDo:verify
+
+	setEgoSensor(ES_PLX); // ToDo:verify
+	setFuelTablesLoadBin(20, mapRange); // ToDo:verify
+	setLinearCurve(config->ignitionLoadBins, 20, mapRange);
+
+	engineConfiguration->isSdCardEnabled = false;
+	engineConfiguration->tpsMin = 0;
+	engineConfiguration->tpsMax = 100;
+}
+
+void set_Benelli_3_cyl_900ccm() {
+	engineConfiguration->displacement = 0.9;
+}
+
+void set_Benelli_3_cyl_1130ccm() {
+  engineConfiguration->displacement = 1.13;
+}
diff --git a/firmware/config/engines/benelli.h b/firmware/config/engines/benelli.h
new file mode 100644
index 0000000000..96b59a583d
--- /dev/null
+++ b/firmware/config/engines/benelli.h
@@ -0,0 +1,15 @@
+/*
+ * @file benelli.h
+ *
+ * @date Feb 13, 2024
+ * @author Michael Holzer, (c) 2024
+ */
+
+#pragma once
+
+#include "engine_configuration.h"
+
+void set_Mre_Benelli_Tre();
+
+void set_Benelli_3_cyl_900ccm();
+void set_Benelli_3_cyl_1130ccm();
diff --git a/firmware/controllers/algo/engine_types.h b/firmware/controllers/algo/engine_types.h
index 524c8d1302..3096e346d1 100644
--- a/firmware/controllers/algo/engine_types.h
+++ b/firmware/controllers/algo/engine_types.h
@@ -83,6 +83,8 @@ enum class engine_type_e : uint32_t {
 
 	VW_ABA = 32,
 
+	MRE_BENELLI_3_CYL = 33,
+
 	HELLEN_NA6 = 34,
 
 	CAMARO_4 = 35,
@@ -207,7 +209,6 @@ enum class engine_type_e : uint32_t {
 	ET_UNUSED_17 = 17,
 	ET_UNUSED_13 = 13,
 	ET_UNUSED_15 = 15,
-	ET_UNUSED_33 = 33,
 	ET_UNUSED_43 = 43,
 	ET_UNUSED_57 = 57,
 	ET_UNUSED_61 = 61,
diff --git a/java_console/autotest/src/main/java/com/rusefi/f4discovery/HighRevTest.java b/java_console/autotest/src/main/java/com/rusefi/f4discovery/HighRevTest.java
index fc30ec0b66..4311d36da4 100644
--- a/java_console/autotest/src/main/java/com/rusefi/f4discovery/HighRevTest.java
+++ b/java_console/autotest/src/main/java/com/rusefi/f4discovery/HighRevTest.java
@@ -29,4 +29,15 @@ public class HighRevTest extends RusefiTestBase {
         // tests bug 1873
         EcuTestHelper.assertRpmDoesNotJump(60, 5, 110, FAIL, ecu.commandQueue);
     }
+    @Test
+    public void testBenelliR3() {
+        ecu.setEngineType(engine_type_e.MRE_BENELLI_3_CYL);
+        // set idle RPM
+        ecu.changeRpm(1500);
+        // first let's get to RPM near limit
+        EcuTestHelper.assertRpmDoesNotJump(11000, 5, 40, FAIL, ecu.commandQueue);
+
+        // tests RpmLimit
+        EcuTestHelper.assertRpmDoesNotJump(12000, 5, 110, FAIL, ecu.commandQueue);
+    }
 }