refactoring

firmware/console/binary/tunerstudio_io.cpp

@@ -9,6 +9,8 @@
 #include "os_access.h"
 #include "tunerstudio_io.h"
 #include "console_io.h"
+#include "connector_uart_dma.h"
+
 #if EFI_SIMULATOR
 #include "rusEfiFunctionalTest.h"
 #endif

firmware/console/binary/tunerstudio_io.h

@@ -31,23 +31,6 @@ typedef struct {
 	char crcReadBuffer[BLOCKING_FACTOR + 30];
 } ts_channel_s;
 
-// See uart_dma_s
-#define TS_FIFO_BUFFER_SIZE (BLOCKING_FACTOR + 30)
-// This must be a power of 2!
-#define TS_DMA_BUFFER_SIZE 32
-
-// struct needed for async DMA transfer mode (see TS_UART_DMA_MODE)
-typedef struct {
-	// circular DMA buffer
-	uint8_t dmaBuffer[TS_DMA_BUFFER_SIZE];
-	// current read position for the DMA buffer
-	volatile int readPos;
-	// secondary FIFO buffer for async. transfer
-	uint8_t buffer[TS_FIFO_BUFFER_SIZE];
-	// input FIFO Rx queue
-	input_queue_t fifoRxQueue;
-} uart_dma_s;
-
 // These commands are used exclusively by the rusEfi console
 #define TS_TEST_COMMAND 't' // 0x74
 #define TS_GET_FILE_RANGE '2' // 0x32

firmware/console/connector_uart_dma.h

@@ -0,0 +1,26 @@
+/*
+ * @file connector_uart_dma.h
+ *
+ * @date Jun 21, 2020
+ * @author Andrey Belomutskiy, (c) 2012-2020
+ */
+
+#pragma once
+#include "global.h"
+
+// See uart_dma_s
+#define TS_FIFO_BUFFER_SIZE (BLOCKING_FACTOR + 30)
+// This must be a power of 2!
+#define TS_DMA_BUFFER_SIZE 32
+
+// struct needed for async DMA transfer mode (see TS_UART_DMA_MODE)
+typedef struct {
+	// circular DMA buffer
+	uint8_t dmaBuffer[TS_DMA_BUFFER_SIZE];
+	// current read position for the DMA buffer
+	volatile int readPos;
+	// secondary FIFO buffer for async. transfer
+	uint8_t buffer[TS_FIFO_BUFFER_SIZE];
+	// input FIFO Rx queue
+	input_queue_t fifoRxQueue;
+} uart_dma_s;