mirror of https://github.com/FOME-Tech/fome-fw.git
Auto-generated configs and docs
This commit is contained in:
parent
94e50f9889
commit
ed504a5ad7
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.alphax-2chan.1273762514"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.alphax-2chan.160737380"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.alphax-2chan.1273762514" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.alphax-2chan.160737380" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.alphax-4chan.3240366259"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.alphax-4chan.2203888133"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.alphax-4chan.3240366259" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.alphax-4chan.2203888133" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.alphax-8chan.3114210890"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.alphax-8chan.4226264316"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.alphax-8chan.3114210890" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.alphax-8chan.4226264316" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.atlas.325578150"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.atlas.1361008400"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.atlas.325578150" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.atlas.1361008400" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.core48.1911364960"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.core48.865445846"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.core48.1911364960" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.core48.865445846" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.core8.1452546211"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.core8.351052309"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.core8.1452546211" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.core8.351052309" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.f407-discovery.2415760501"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.f407-discovery.3448057539"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.f407-discovery.2415760501" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.f407-discovery.3448057539" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.f429-discovery.1857230101"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.f429-discovery.751546275"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.f429-discovery.1857230101" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.f429-discovery.751546275" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.frankenso_na6.1289876959"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.frankenso_na6.244928361"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.frankenso_na6.1289876959" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.frankenso_na6.244928361" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.harley81.3878038895"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.harley81.2774439897"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.harley81.3878038895" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.harley81.2774439897" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen-gm-e67.131742662"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen-gm-e67.1168277872"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen-gm-e67.131742662" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen-gm-e67.1168277872" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen-honda-k.2622223751"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen-honda-k.3727904561"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen-honda-k.2622223751" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen-honda-k.3727904561" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen-nb1.2576614569"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen-nb1.3689725471"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen-nb1.2576614569" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen-nb1.3689725471" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen121nissan.3914311907"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen121nissan.2872513109"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen121nissan.3914311907" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen121nissan.2872513109" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen121vag.1162651440"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen121vag.120855942"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen121vag.1162651440" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen121vag.120855942" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen128.3995169970"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen128.2891566596"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen128.3995169970" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen128.2891566596" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen154hyundai.2060866643"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen154hyundai.950988517"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen154hyundai.2060866643" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen154hyundai.950988517" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen72.2668072098"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen72.3716101652"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen72.2668072098" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen72.3716101652" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen81.864941600"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen81.1911901334"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen81.864941600" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen81.1911901334" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen88bmw.901112083"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellen88bmw.2009947045"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen88bmw.901112083" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellen88bmw.2009947045" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellenNA6.1649913650"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellenNA6.539956612"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellenNA6.1649913650" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellenNA6.539956612" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellenNA8_96.3248956194"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.hellenNA8_96.2212469140"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellenNA8_96.3248956194" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.hellenNA8_96.2212469140" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.mre_f4.2302505133"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.mre_f4.3410348571"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.mre_f4.2302505133" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.mre_f4.3410348571" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.mre_f7.2302505133"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.mre_f7.3410348571"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.mre_f7.2302505133" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.mre_f7.3410348571" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.prometheus_405.1579669637"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.prometheus_405.476013107"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.prometheus_405.1579669637" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.prometheus_405.476013107" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.prometheus_469.1579669637"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.prometheus_469.476013107"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.prometheus_469.1579669637" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.prometheus_469.476013107" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.proteus_f4.506716307"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.proteus_f4.1548442149"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.proteus_f4.506716307" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.proteus_f4.1548442149" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 25004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.proteus_f7.506716307"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.proteus_f7.1548442149"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.proteus_f7.506716307" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.proteus_f7.1548442149" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 25004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.proteus_h7.506716307"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.proteus_h7.1548442149"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.proteus_h7.506716307" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.proteus_h7.1548442149" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 25004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.small-can-board.2262762123"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.small-can-board.3299326013"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.small-can-board.2262762123" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.small-can-board.3299326013" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 38004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI (FOME) master.2024.08.20.tdg-pdm8.3827120439"
|
||||
signature = "rusEFI (FOME) master.2024.08.20.tdg-pdm8.2791670657"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.tdg-pdm8.3827120439" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI (FOME) master.2024.08.20.tdg-pdm8.2791670657" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -1558,7 +1558,7 @@ minimumOilPressureValues = array, U08, 21004, [8], "kPa", 10.0, 0, 0, 1000, 0
|
|||
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
|
||||
baroSensor_lowValue = "kPa value at low volts"
|
||||
baroSensor_highValue = "kPa value at high volts"
|
||||
manIdlePosition = "Value between 0 and 100 used in Manual mode"
|
||||
manIdlePosition = "Base idle valve position, 0 to 100%. This is typically set to provide an idle speed slightly above the target RPM when the engine is fully warmed up."
|
||||
knockRetardAggression = "Ignition timing to remove when a knock event occurs. Advice: 5% (mild), 10% (turbo/high comp.), 15% (high knock, e.g. GDI), 20% (spicy lump),"
|
||||
knockRetardReapplyRate = "After a knock event, reapply timing at this rate."
|
||||
engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync."
|
||||
|
|
|
@ -1201,7 +1201,7 @@ public class Fields {
|
|||
public static final int TS_RESPONSE_UNDERRUN = 0x80;
|
||||
public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
|
||||
public static final char TS_SET_LOGGER_SWITCH = 'l';
|
||||
public static final String TS_SIGNATURE = "rusEFI (FOME) master.2024.08.20.f407-discovery.2415760501";
|
||||
public static final String TS_SIGNATURE = "rusEFI (FOME) master.2024.08.20.f407-discovery.3448057539";
|
||||
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
|
||||
public static final int TS_TOTAL_OUTPUT_SIZE = 1384;
|
||||
public static final String TS_TRIGGER_SCOPE_CHANNEL_1_NAME = "Channel 1";
|
||||
|
|
Loading…
Reference in New Issue