Start -> start (#4366)

firmware/console/binary/ts_can_channel.cpp

@@ -102,7 +102,7 @@ struct CanTsThread : public TunerstudioThread {
 static CanTsThread canTsThread;
 
 void startCanConsole() {
-	canTsThread.Start();
+	canTsThread.start();
 	canStreamInit();
 }
 

firmware/console/binary/tunerstudio_io_serial_ports.cpp

@@ -93,12 +93,12 @@ void startSerialChannels() {
 #if HAS_PRIMARY
 	// todo: invert setting one day?
 	if (!engineConfiguration->disablePrimaryUart) {
-		primaryChannelThread.Start();
+		primaryChannelThread.start();
 	}
 #endif
 
 #if HAS_SECONDARY
-	secondaryChannelThread.Start();
+	secondaryChannelThread.start();
 #endif
 }
 

firmware/console/ethernet_console.cpp

@@ -98,7 +98,7 @@ void startEthernetConsole() {
 	efiSetPadMode("ethernet", Gpio::G14, PAL_MODE_ALTERNATE(0xb));
 #endif // STM32H7
 
-	ethernetConsole.Start();
+	ethernetConsole.start();
 }
 
 #endif // EFI_ETHERNET

firmware/console/status_loop.cpp

@@ -934,10 +934,10 @@ void startStatusThreads(void) {
 	// todo: refactoring needed, this file should probably be split into pieces
 #if EFI_PROD_CODE
 	initStatusLeds();
-	communicationsBlinkingTask.Start();
+	communicationsBlinkingTask.start();
 #endif /* EFI_PROD_CODE */
 
 #if EFI_LCD
-	lcdInstance.Start();
+	lcdInstance.start();
 #endif /* EFI_LCD */
 }

firmware/console/usb_console.cpp

@@ -51,7 +51,7 @@ struct UsbThread : public TunerstudioThread {
 static UsbThread usbConsole;
 
 void startUsbConsole() {
-	usbConsole.Start();
+	usbConsole.start();
 }
 
 #endif // EFI_USB_SERIAL

firmware/controllers/actuators/electronic_throttle.cpp

@@ -1008,7 +1008,7 @@ void doInitElectronicThrottle() {
 #endif /* EFI_UNIT_TEST */
 
 #if !EFI_UNIT_TEST
-	etbThread.Start();
+	etbThread.start();
 #endif
 }
 

firmware/controllers/actuators/vvt.cpp

@@ -156,7 +156,7 @@ void initAuxPid() {
 	startVvtControlPins();
 
 	for (int i = 0;i < CAM_INPUTS_COUNT;i++) {
-		instances[i].Start();
+		instances[i].start();
 	}
 }
 

firmware/controllers/bench_test.cpp

@@ -574,7 +574,7 @@ void initBenchTest() {
 
 	addConsoleActionFFFFF("luabench2", luaOutBench2);
 	instance.setPeriod(200 /*ms*/);
-	instance.Start();
+	instance.start();
 	onConfigurationChangeBenchTest();
 }
 

firmware/controllers/engine_controller.cpp

@@ -237,8 +237,8 @@ static void doPeriodicSlowCallback() {
 }
 
 void initPeriodicEvents() {
-	slowController.Start();
+	slowController.start();
-	fastController.Start();
+	fastController.start();
 }
 
 char * getPinNameByAdcChannel(const char *msg, adc_channel_e hwChannel, char *buffer) {
@@ -697,7 +697,7 @@ void initEngineContoller() {
 		return;
 	}
 
-	engineStateBlinkingTask.Start();
+	engineStateBlinkingTask.start();
 
 	initVrPwm();
 

firmware/controllers/gauges/malfunction_indicator.cpp

@@ -122,7 +122,7 @@ void initMalfunctionIndicator(void) {
 		return;
 	}
 	instance.setPeriod(10 /*ms*/);
-	instance.Start();
+	instance.start();
 
 #if	TEST_MIL_CODE
 	addConsoleAction("testmil", testMil);

firmware/controllers/lua/lua.cpp

@@ -352,7 +352,7 @@ void startLua() {
 	initLuaCanRx();
 #endif // EFI_CAN_SUPPORT
 
-	luaThread.Start();
+	luaThread.start();
 
 	addConsoleActionS("lua", [](const char* str){
 		if (interactivePending) {

firmware/controllers/sensors/software_knock.cpp

@@ -150,7 +150,7 @@ void initSoftwareKnock() {
 #if KNOCK_HAS_CH2		
 		efiSetPadMode("knock ch2", KNOCK_PIN_CH2, PAL_MODE_INPUT_ANALOG);
 #endif
-		kt.Start();
+		kt.start();
 	}
 }
 

firmware/controllers/system/periodic_task.h

@@ -35,7 +35,7 @@ public:
 	/**
 	 * This invokes PeriodicTask() immediately and starts the cycle of invocations and sleeps
 	 */
-	virtual void Start() {
+	virtual void start() {
 #if !EFI_UNIT_TEST
 		chVTObjectInit(&timer);
 #endif // EFI_UNIT_TEST

firmware/controllers/system/thread_controller.h

@@ -55,7 +55,7 @@ public:
     /**
      * @brief Start the thread.
      */
-    void Start()
+    void start()
     {
 		if (m_isStarted) {
 			warning(CUSTOM_OBD_6003, "Tried to start thread %s but it was already running", m_name);

firmware/hw_layer/adc/adc_inputs.cpp

@@ -460,7 +460,7 @@ void initAdcInputs() {
 	portInitAdc();
 
 	// Start the slow ADC thread
-	slowAdcController.Start();
+	slowAdcController.start();
 
 #if EFI_USE_FAST_ADC
 	fastAdc.init();

firmware/hw_layer/drivers/can/can_hw.cpp

@@ -139,11 +139,11 @@ public:
 	{
 	}
 
-	void Start(CANDriver* device) {
+	void start(CANDriver* device) {
 		m_device = device;
 
 		if (device) {
-			ThreadController::Start();
+			ThreadController::start();
 		}
 	}
 
@@ -318,12 +318,12 @@ void initCan() {
 
 	// fire up threads, as necessary
 	if (engineConfiguration->canWriteEnabled) {
-		canWrite.Start();
+		canWrite.start();
 	}
 
 	if (engineConfiguration->canReadEnabled) {
-		canRead1.Start(device1);
+		canRead1.start(device1);
-		canRead2.Start(device2);
+		canRead2.start(device2);
 	}
 
 	isCanEnabled = true;

firmware/hw_layer/drivers/serial/serial_hw.cpp

@@ -85,7 +85,7 @@ void initAuxSerial(void) {
 	startAuxSerialPins();
 
 	if (isSerialRXEnabled)
-		serialRead.Start();
+		serialRead.start();
 }
 
 #endif // EFI_AUX_SERIAL

firmware/hw_layer/mass_storage/mass_storage_init.cpp

@@ -117,7 +117,7 @@ void initUsbMsd() {
 	msd.attachLun(1, (BaseBlockDevice*)&ND1, blkbuf1, &sdCardInquiry, nullptr);
 
 	// start the mass storage thread
-	msd.Start();
+	msd.start();
 }
 
 #endif // HAL_USE_USB_MSD

firmware/hw_layer/microsecond_timer/microsecond_timer.cpp

@@ -177,7 +177,7 @@ void initMicrosecondTimer() {
 
 	watchDogBuddyCallback(NULL);
 #if EFI_EMULATE_POSITION_SENSORS
-	watchdogControllerInstance.Start();
+	watchdogControllerInstance.start();
 #endif /* EFI_EMULATE_POSITION_SENSORS */
 }
 

firmware/hw_layer/stepper.cpp

@@ -209,7 +209,7 @@ bool StepDirectionStepper::step(bool positive) {
 void StepperMotor::initialize(StepperHw *hardware, int totalSteps) {
 	StepperMotorBase::initialize(hardware, totalSteps);
 
-	Start();
+	start();
 }
 
 void StepDirectionStepper::initialize(brain_pin_e stepPin, brain_pin_e directionPin, pin_output_mode_e directionPinMode, float reactionTime, brain_pin_e enablePin, pin_output_mode_e enablePinMode) {

firmware/util/loggingcentral.cpp

@@ -160,7 +160,7 @@ void startLoggingProcessor() {
 	}
 
 	// Start processing used buffers
-	lbf.Start();
+	lbf.start();
 }
 
 #endif // EFI_PROD_CODE