mirror of https://github.com/FOME-Tech/fome-fw.git
* 2 byte pin index #4097 * 2 byte pin index #4097 good time to defragment configuration * 2 byte pin index #4097 new fancy way * 2 byte pin index #4097 smart comment Co-authored-by: rusefillc <sdfsdfqsf2334234234>
This commit is contained in:
rusefillc
GitHub
parent
5016673406
commit
f341ce561e
|
|
@ -20,7 +20,7 @@ typedef enum __attribute__ ((__packed__)) {
|
|||
/**
|
||||
* Hardware pin. This enum is platform-specific.
|
||||
*/
|
||||
enum class Gpio : uint8_t {
|
||||
enum class Gpio : uint16_t {
|
||||
Unassigned = 0,
|
||||
Invalid = 1,
|
||||
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ typedef enum __attribute__ ((__packed__)) {
|
|||
/**
|
||||
* Hardware pin. This enum is platform-specific.
|
||||
*/
|
||||
enum class Gpio : uint8_t {
|
||||
enum class Gpio : uint16_t {
|
||||
Unassigned = 0,
|
||||
// only used as return value of 'parseBrainPin' function do we really this this logic special value at all?!
|
||||
Invalid = 1,
|
||||
|
|
|
|||
|
|
@ -86,13 +86,13 @@
|
|||
! so not forget to change fileVersion in rusefi.ini
|
||||
! todo: this not needed in light of TS_SIGNATURE but rusEFI console still uses it. Need to migrate
|
||||
! rusEFI console from TS_FILE_VERSION to TS_SIGNATURE :(
|
||||
#define TS_FILE_VERSION 20200310
|
||||
#define TS_FILE_VERSION 20210310
|
||||
|
||||
! This is the version of the data stored in flash configuration
|
||||
! Any time an incompatible change is made to the configuration format stored in flash,
|
||||
! update this string to the current date! It is required to also update TS_SIGNATURE above
|
||||
! when this happens.
|
||||
#define FLASH_DATA_VERSION 10009
|
||||
#define FLASH_DATA_VERSION 10010
|
||||
|
||||
#define LOG_DELIMITER "`"
|
||||
|
||||
|
|
@ -324,7 +324,7 @@ custom vvt_mode_e 1 bits, U08, @OFFSET@, [0:4], @@vvt_mode_e_enum@@
|
|||
! todo: maybe convert fast ADC to software scheduler as well? less sure about that
|
||||
|
||||
#define brain_input_pin_e_enum "NONE", "INVALID", "INVALID", "PA1", "PA2", "PA3", "INVALID", "PA5", "PA6", "PA7", "PA8", "PA9", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PA15", "INVALID", "INVALID", "INVALID", "PB3", "PB4", "PB5", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PC6", "PC7", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PE5", "PE6", "INVALID", "INVALID", "PE9", "INVALID", "PE11", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
custom brain_input_pin_e 1 bits, U08, @OFFSET@, [0:7], @@brain_input_pin_e_enum@@
|
||||
custom brain_input_pin_e 2 bits, U16, @OFFSET@, [0:7], @@brain_input_pin_e_enum@@
|
||||
|
||||
!
|
||||
! 'Gpio' is the most flexible kind of pin
|
||||
|
|
@ -336,11 +336,11 @@ custom brain_input_pin_e 1 bits, U08, @OFFSET@, [0:7], @@brain_input_pin_e_enum@
|
|||
#define Gpio_enum "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
#define switch_input_pin_e_enum "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
|
||||
custom Gpio 1 bits, U08, @OFFSET@, [0:7], @@Gpio_enum@@
|
||||
custom switch_input_pin_e 1 bits, U08, @OFFSET@, [0:7], @@switch_input_pin_e_enum@@
|
||||
custom Gpio 2 bits, U16, @OFFSET@, [0:7], @@Gpio_enum@@
|
||||
custom switch_input_pin_e 2 bits, U08, @OFFSET@, [0:7], @@switch_input_pin_e_enum@@
|
||||
|
||||
#define output_pin_e_enum "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15", "MC33972_1", "MC33972_2", "MC33972_3", "MC33972_4", "MC33972_5", "MC33972_6", "MC33972_7", "MC33972_8", "MC33972_9", "MC33972_10", "MC33972_11", "MC33972_12", "MC33972_13", "MC33972_14", "MC33972_15", "MC33972_16", "MC33972_17", "MC33972_18", "MC33972_19", "MC33972_20", "MC33972_21", "MC33972_22", "TLE8888_1", "TLE8888_2", "TLE8888_3", "TLE8888_4", "TLE8888_5", "TLE8888_6", "TLE8888_7", "TLE8888_8", "TLE8888_9", "TLE8888_10", "TLE8888_11", "TLE8888_12", "TLE8888_13", "TLE8888_14", "TLE8888_15", "TLE8888_16", "TLE8888_17", "TLE8888_18", "TLE8888_19", "TLE8888_20", "TLE8888_21", "TLE8888_22", "TLE8888_23", "TLE8888_24", "TLE8888_25", "TLE8888_26", "TLE8888_27", "TLE8888_28", "INVALID", "INVALID", "INVALID", "TLE6240_1", "TLE6240_2", "TLE6240_3", "TLE6240_4", "TLE6240_5", "TLE6240_6", "TLE6240_7", "TLE6240_8", "TLE6240_9", "TLE6240_10", "TLE6240_11", "TLE6240_12", "TLE6240_13", "TLE6240_14", "TLE6240_15", "TLE6240_16", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
custom output_pin_e 1 bits, U08, @OFFSET@, [0:7], @@output_pin_e_enum@@
|
||||
custom output_pin_e 2 bits, U16, @OFFSET@, [0:7], @@output_pin_e_enum@@
|
||||
|
||||
#define pin_output_mode_e_enum "default", "default inverted", "open collector", "open collector inverted"
|
||||
custom pin_output_mode_e 1 bits, U08, @OFFSET@, [0:1], @@pin_output_mode_e_enum@@
|
||||
|
|
@ -437,8 +437,6 @@ uint8_t autoscale engineSnifferRpmThreshold;Engine sniffer would be disabled abo
|
|||
|
||||
uint8_t[ENGINE_NOISE_CURVE_SIZE] autoscale knockNoiseRpmBins;;"RPM", @@RPM_1_BYTE_PACKING_MULT@@, 0, 0, 18000, 2
|
||||
|
||||
uint8_t[24] unused28;;"", 1, 0, 0, 0, 0
|
||||
|
||||
uint8_t multisparkMaxSparkingAngle;+This parameter sets the latest that the last multispark can occur after the main ignition event. For example, if the ignition timing is 30 degrees BTDC, and this parameter is set to 45, no multispark will ever be fired after 15 degrees ATDC.;"deg", 1, 0, 0, 60, 0
|
||||
uint8_t multisparkMaxExtraSparkCount;+Configures the maximum number of extra sparks to fire (does not include main spark);"count", 1, 0, 1, 5, 0
|
||||
|
||||
|
|
@ -496,7 +494,6 @@ int16_t tpsErrorDetectionTooLow;+TPS error detection: what throttle % is unreali
|
|||
int16_t tpsErrorDetectionTooHigh;+TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped.;"%", 1, 0, 100, 110, 0
|
||||
|
||||
cranking_parameters_s cranking
|
||||
float unused184;;"",1,0,0,0,0
|
||||
float ignitionDwellForCrankingMs;+Dwell duration while cranking;"ms", 1, 0, 0, 200, 1
|
||||
uint16_t etbRevLimitStart;+Once engine speed passes this value, start reducing ETB angle.;"rpm", 1, 0, 0, 15000, 0
|
||||
uint16_t etbRevLimitRange;+This far above 'Soft limiter start', fully close the throttle. At the bottom of the range, throttle control is normal. At the top of the range, the throttle is fully closed.;"rpm", 1, 0, 0, 2000, 0
|
||||
|
|
@ -571,7 +568,6 @@ can_nbc_e canNbcType;set can_mode X
|
|||
|
||||
int canSleepPeriodMs;CANbus thread period in ms;"ms", 1, 0, 0, 1000, 2
|
||||
|
||||
int weHaveUnusedHere;;"index", 1, 0, 0, 300, 0
|
||||
|
||||
custom display_mode_e 4 bits, U32, @OFFSET@, [0:1], "none", "hd44780", "hd44780 over pcf8574", "INVALID"
|
||||
display_mode_e displayMode;
|
||||
|
|
@ -1067,7 +1063,6 @@ custom idle_mode_e 4 bits, U32, @OFFSET@, [0:0], "Open Loop + Closed Loop", "Ope
|
|||
bit isMapAveragingEnabled
|
||||
bit overrideCrankingIacSetting;+If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position.
|
||||
bit useSeparateAdvanceForIdle;+This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed.
|
||||
bit unused1476b8
|
||||
bit isWaveAnalyzerEnabled
|
||||
bit useSeparateVeForIdle;+This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling.
|
||||
bit verboseTriggerSynchDetails;+enable trigger_details
|
||||
|
|
@ -1079,10 +1074,11 @@ bit useFixedBaroCorrFromMap
|
|||
bit useSeparateAdvanceForCranking,"Table","Fixed (auto taper)";+In Constant mode, timing is automatically tapered to running as RPM increases.\nIn Table mode, the "Cranking ignition advance" table is used directly.
|
||||
bit useAdvanceCorrectionsForCranking;+This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).\nYou probably don't need this.
|
||||
bit flexCranking;Enable a second cranking table to use for E100 flex fuel, interpolating between the two based on flex fuel sensor.
|
||||
bit unused1476b20
|
||||
bit useIacPidMultTable;+This flag allows to use a special 'PID Multiplier' table (0.0-1.0) to compensate for nonlinear nature of IAC-RPM controller
|
||||
bit isBoostControlEnabled
|
||||
bit launchSmoothRetard;+Interpolates the Ignition Retard from 0 to 100% within the RPM Range
|
||||
bit unused1476b20
|
||||
bit unused1476b8
|
||||
bit unused_1484_bit_24
|
||||
bit unused_1484_bit_25
|
||||
bit unused_1484_bit_26
|
||||
|
|
@ -1153,10 +1149,10 @@ int16_t tps2Max;Full throttle#2. tpsMax value as 10 bit ADC value. Not Voltage!\
|
|||
pid_s idleRpmPid;See cltIdleRpmBins
|
||||
float wwaeBeta;+0 = No fuel settling on port walls 1 = All the fuel settling on port walls setting this to 0 disables the wall wetting enrichment. ;"Fraction", 1, 0, 0, 1, 2
|
||||
|
||||
Gpio communicationLedPin;+blue LED on many rusEFI boards.\nBlue Communication LED which is expected to blink at 50% duty cycle during normal board operation.\nIf USB communication cable is connected Blue LED starts to blink faster.
|
||||
Gpio communicationLedPin;+blue LED on many rusEFI boards.\nBlue Communication LED which is expected to blink at 50% duty cycle during normal board operation.\nIf USB communication cable is connected Blue LED starts to blink faster.
|
||||
Gpio runningLedPin;+Green LED on many rusEFI boards.\nOff if engine is stopped, blinks if engine is cranking, solid if engine is running.
|
||||
Gpio binarySerialTxPin;See also EFI_CONSOLE_RX_BRAIN_PIN
|
||||
Gpio binarySerialRxPin;
|
||||
Gpio binarySerialRxPin;
|
||||
|
||||
Gpio[AUX_DIGITAL_VALVE_COUNT iterate] auxValves
|
||||
switch_input_pin_e tcuUpshiftButtonPin
|
||||
|
|
@ -1226,10 +1222,10 @@ int16_t tps2Max;Full throttle#2. tpsMax value as 10 bit ADC value. Not Voltage!\
|
|||
uint8_t mc33_hpfp_i_hold_off;+How long to deactivate power when hold current is reached before applying power again;"us", 1, 0, 0, 255, 0
|
||||
uint8_t mc33_hpfp_max_hold;+Maximum amount of time the solenoid can be active before assuming a programming error;"ms", 1, 0, 0, 255, 0
|
||||
|
||||
bit stepperDcInvertedPins;+Enable if DC-motor driver (H-bridge) inverts the signals (eg. RZ7899 on Hellen boards)
|
||||
bit unused1740b0
|
||||
bit unused1740b1
|
||||
bit unused1740b2
|
||||
bit stepperDcInvertedPins;+Enable if DC-motor driver (H-bridge) inverts the signals (eg. RZ7899 on Hellen boards)
|
||||
bit unused1127
|
||||
bit unused1128
|
||||
bit unused1129
|
||||
|
|
@ -1239,7 +1235,7 @@ int16_t tps2Max;Full throttle#2. tpsMax value as 10 bit ADC value. Not Voltage!\
|
|||
uint8_t autoscale benchTestOnTime;;"ms", 5, 0, 0, 2000, 1
|
||||
pin_input_mode_e launchActivatePinMode;
|
||||
Gpio can2TxPin;set_can2_tx_pin X
|
||||
Gpio can2RxPin;set_can2_rx_pin X
|
||||
Gpio can2RxPin;set_can2_rx_pin X
|
||||
pin_output_mode_e starterControlPinMode;
|
||||
adc_channel_e wastegatePositionSensor;
|
||||
load_override_e ignOverrideMode;+Override the Y axis (load) value used for the ignition table.\nAdvanced users only: If you aren't sure you need this, you probably don't need this.
|
||||
|
|
@ -1256,8 +1252,6 @@ int16_t tps2Max;Full throttle#2. tpsMax value as 10 bit ADC value. Not Voltage!\
|
|||
uint8_t[16] autoscale tchargeBins;;"kg/h", 5, 0, 0, 1200, 0
|
||||
uint8_t[16] autoscale tchargeValues;;"ratio", 0.01, 0, 0, 1, 2
|
||||
|
||||
float[8] unusedMapAccelTaperBins;;"counter", 1, 0, 0, 300, 0
|
||||
|
||||
float fixedTiming;Fixed timing, useful for TDC testing;"deg", 1, 0, -720, 720, 2
|
||||
float mapLowValueVoltage;MAP voltage for low point;"v", 1, 0, 0, 10, 2
|
||||
float mapHighValueVoltage;MAP voltage for low point;"v", 1, 0, 0, 10, 2
|
||||
|
|
@ -1511,14 +1505,12 @@ tChargeMode_e tChargeMode;
|
|||
uint16_t[HPFP_COMPENSATION_SIZE] autoscale hpfpCompensationLoadBins;;"cc/lobe", 0.001, 0, 0, 65, 3
|
||||
uint8_t[HPFP_COMPENSATION_SIZE] autoscale hpfpCompensationRpmBins;;"RPM", @@RPM_1_BYTE_PACKING_MULT@@, 0, 0, 12500, 0
|
||||
|
||||
uint8_t[24] unusedTpsBins;;"TPS", 1, 0, 0, 255, 0
|
||||
|
||||
output_pin_e[4 iterate] stepper_raw_output;
|
||||
|
||||
uint16_t[GEARS_COUNT iterate] autoscale gearRatio;;"ratio", 0.01, 0, 0, 10, 2
|
||||
|
||||
uint16_t vvtActivationDelayMs;We need to give engine time to build oil pressure without diverting it to VVT;"ms", 1, 0, 0, 65000, 0
|
||||
uint16_t unusedShort;;"RPM", 1, 0, 0, 65000, 0
|
||||
|
||||
#define WWAE_TABLE_SIZE 8
|
||||
|
||||
|
|
@ -1557,7 +1549,7 @@ output_pin_e tcu_32_solenoid_pin
|
|||
pin_output_mode_e tcu_32_solenoid_pin_mode
|
||||
pwm_freq_t tcu_32_solenoid_freq
|
||||
|
||||
uint8_t[222] mainUnusedEnd;;"units", 1, 0, 0, 1, 0
|
||||
uint8_t[250] mainUnusedEnd;;"units", 1, 0, 0, 1, 0
|
||||
|
||||
! end of engine_configuration_s
|
||||
end_struct
|
||||
|
|
@ -1623,8 +1615,6 @@ uint16_t[FUEL_RPM_COUNT] injPhaseRpmBins;;"RPM", 1, 0, 0, 18000, 0
|
|||
|
||||
uint8_t[TCU_SOLENOID_COUNT x TCU_GEAR_COUNT] tcuSolenoidTable;;"onoff", 1, 0, 0, 1, 0
|
||||
|
||||
float unused17440;;"", 1, 0, 0, 0, 0
|
||||
|
||||
uint16_t[FUEL_RPM_COUNT x FUEL_LOAD_COUNT] autoscale mapEstimateTable;;"kPa", 0.01, 0, 0, 600, 2
|
||||
uint16_t[FUEL_LOAD_COUNT] autoscale mapEstimateTpsBins;;"% TPS", {1/@@TPS_2_BYTE_PACKING_MULT@@}, 0, 0, 100, 1
|
||||
uint16_t[FUEL_RPM_COUNT] mapEstimateRpmBins;;"RPM", 1, 0, 0, 18000, 0
|
||||
|
|
|
|||
|
|
@ -116,7 +116,7 @@ public class FullServerTest {
|
|||
TestHelper.TEST_TOKEN_1, TcpConnector.LOCALHOST + ":" + controllerPort, networkConnectorContext, NetworkConnector.ReconnectListener.VOID);
|
||||
ControllerInfo controllerInfo = networkConnectorResult.getControllerInfo();
|
||||
|
||||
TestHelper.assertLatch("controllerRegistered", controllerRegistered);
|
||||
TestHelper.assertLatch("controllerRegistered. todo: this test should not depend on internet connection and having real .ini on rusEFI online", controllerRegistered);
|
||||
|
||||
SessionDetails authenticatorSessionDetails = new SessionDetails(NetworkConnector.Implementation.Unknown, controllerInfo, TEST_TOKEN_3, networkConnectorResult.getOneTimeToken(), rusEFIVersion.CONSOLE_VERSION);
|
||||
ApplicationRequest applicationRequest = new ApplicationRequest(authenticatorSessionDetails, userDetailsResolver.apply(TestHelper.TEST_TOKEN_1));
|
||||
|
|
|
|||
|
|
@ -95,10 +95,10 @@ TEST(CppMemoryLayout, PlainExtraFieldsStruct) {
|
|||
}
|
||||
|
||||
TEST(CppMemoryLayout, structSize) {
|
||||
ASSERT_EQ(1, sizeof(adc_channel_e)) << "small enum size";
|
||||
ASSERT_EQ(1, sizeof(pin_input_mode_e)) << "small enum size";
|
||||
ASSERT_EQ(1, sizeof(pin_output_mode_e)) << "small enum size";
|
||||
ASSERT_EQ(1, sizeof(brain_pin_e)) << "small enum size";
|
||||
ASSERT_EQ(1, sizeof(adc_channel_e)) << "adc_channel_e enum size";
|
||||
ASSERT_EQ(1, sizeof(pin_input_mode_e)) << "pin_input_mode_e enum size";
|
||||
ASSERT_EQ(1, sizeof(pin_output_mode_e)) << "pin_output_mode_e enum size";
|
||||
ASSERT_EQ(2, sizeof(brain_pin_e)) << "brain_pin_e enum size";
|
||||
ASSERT_EQ(16, sizeof(air_pressure_sensor_config_s));
|
||||
ASSERT_EQ(TOTAL_CONFIG_SIZE, sizeof(persistent_config_s));
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue