auto-sync

firmware/controllers/algo/engine_configuration_generated_structures.h

@@ -1,4 +1,4 @@
-// this section was generated by config_definition.jar on Fri May 22 22:10:47 EDT 2015
+// this section was generated by config_definition.jar on Sat May 23 19:27:45 EDT 2015
 // begin
 #include "rusefi_types.h"
 typedef struct {
@@ -738,7 +738,11 @@ typedef struct {
 	/**
 	 * offset 320
 	 */
-	float unused[4];
+	float unused[3];
+	/**
+	 * offset 332
+	 */
+	float knockBandCustom;
 	/**
 	 * offset 336
 	 */
@@ -1329,4 +1333,4 @@ typedef struct {
 } persistent_config_s;
 
 // end
-// this section was generated by config_definition.jar on Fri May 22 22:10:47 EDT 2015
+// this section was generated by config_definition.jar on Sat May 23 19:27:45 EDT 2015

firmware/controllers/algo/rusefi_generated.h

@@ -108,6 +108,7 @@
 #define iat_adcChannel_offset 316
 #define unused_offset 320
 #define unused_offset_hex 140
+#define knockBandCustom_offset 332
 #define sparkDwellBins_offset 336
 #define sparkDwellBins_offset_hex 150
 #define sparkDwell_offset 368

firmware/hw_layer/HIP9011.cpp

@@ -34,6 +34,7 @@
 #include "HIP9011.h"
 #include "adc_inputs.h"
 #include "efilib2.h"
+#include "engine_controller.h"
 
 #if EFI_HIP_9011 || defined(__DOXYGEN__)
 
@@ -102,6 +103,7 @@ static SPIDriver *driver = &SPID2;
 EXTERN_ENGINE
 ;
 
+static char pinNameBuffer[16];
 static void showHipInfo(void) {
 	if (!boardConfiguration->isHip9011Enabled) {
 		scheduleMsg(logger, "hip9011 driver not active");
@@ -109,18 +111,18 @@ static void showHipInfo(void) {
 	}
 
 	printSpiState(logger, boardConfiguration);
-	scheduleMsg(logger, "bore=%f freq=%f", engineConfiguration->cylinderBore, BAND(engineConfiguration->cylinderBore));
+	scheduleMsg(logger, "bore=%fmm freq=%fkHz", engineConfiguration->cylinderBore, BAND(engineConfiguration->cylinderBore));
 
 	scheduleMsg(logger, "band_index=%d gain %f/index=%d", bandIndex, boardConfiguration->hip9011Gain, currentGainIndex);
 	scheduleMsg(logger, "integrator index=%d hip_threshold=%f totalKnockEventsCount=%d", currentIntergratorIndex,
 			engineConfiguration->hipThreshold, totalKnockEventsCount);
 
-	scheduleMsg(logger, "spi= int=%s response count=%d", hwPortname(boardConfiguration->hip9011IntHoldPin),
+	scheduleMsg(logger, "spi= IntHold@%s response count=%d", hwPortname(boardConfiguration->hip9011IntHoldPin),
 			nonZeroResponse);
-	scheduleMsg(logger, "CS=%s updateCount=%d", hwPortname(boardConfiguration->hip9011CsPin), settingUpdateCount);
+	scheduleMsg(logger, "CS@%s updateCount=%d", hwPortname(boardConfiguration->hip9011CsPin), settingUpdateCount);
 
-	scheduleMsg(logger, "value=%f@#%d", getVoltageDivided("hip", engineConfiguration->hipOutputChannel),
-			engineConfiguration->hipOutputChannel);
+	scheduleMsg(logger, "hip output=%fv@%s", getVoltageDivided("hip", engineConfiguration->hipOutputChannel),
+			getPinNameByAdcChannel(engineConfiguration->hipOutputChannel, pinNameBuffer));
 }
 
 void setHip9011FrankensoPinout(void) {

firmware/integration/rusefi_config.txt

@@ -159,7 +159,8 @@ MAP_sensor_config_s map;@see hasMapSensor\n@see isMapAveragingEnabled
 ThermistorConf clt;todo: merge with channel settings, use full-scale Thermistor here!
 ThermistorConf iat;
 	
-	float[4] unused;
+	float[3] unused;
+	float knockBandCustom;
 
 
 float[DWELL_CURVE_SIZE] sparkDwellBins;;"RPM",     1,   0.0,      0.0,  18000,   2

java_console/autotest/src/com/rusefi/AutoTest.java

@@ -214,7 +214,7 @@ public class AutoTest {
 
         String msg = "ford 6";
 
-        double x = 12.84;
+        double x = 8.16;
         assertWave(msg, chart, EngineChart.SPARK_1, 0.01666, x, x + 120, x + 240, x + 360, x + 480, x + 600);
 
         assertWaveNull(msg, chart, EngineChart.TRIGGER_2);

java_console/autotest/src/com/rusefi/TestingUtils.java

@@ -96,7 +96,6 @@ public class TestingUtils {
                 System.out.println("t " + revolutionLog.getCrankAngleByTime(ud.upTime));
             }
             assertCloseEnough(msg + " width for " + key, actualWidth, widthRatio, expectedWidth);
-
         }
     }