FOME-Tech
/
fome-fw
mirror of https://github.com/FOME-Tech/fome-fw.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
10,906 Commits 30 Branches 13 Tags 626 MiB
Commit Graph

8253 Commits

Author SHA1 Message Date
GitHub build-firmware Action a873f9f72b Auto-generated configs and docs 2020-10-23 16:27:21 +00:00
Andrey G 88e830d635 Tle8888 big update 1 (#1892) 
* smart gpio: fix tle8888 direct pin mapping for MRE

* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888

* TLE8888: cleanup

* TLE8888: do not reset driver private data on WD/undervoltage reset

* TLE8888: diagnostic updates

* TLE8888 driver: BIG driver rework

* TLE8888: check SPI answers for abnormal states

Reply with other than requested register can be a sign of:
-Power-On-Reset, then OpStat0 will be replyed
-WatchDog reset, then FWDStat1 will be replyed
-Invalid communication frame, then Diag0 will be replyed

Keep tracking last accessed register and check with the next reply.

* TLE8888: debug clean-up

* TLE8888: implement spi array write

This reduce CS inactive state time between two consequent accesses
from 8.8 uS to 1.4 uS

* TLE8888: fix PP outputs in OD mode

* TLE8888: cleanup register definitions

* TLE8888: run separate driver thread for each chip instance

Calculating poll interval for few chips become more complex, avoid
this running thread for each device.

* TLE8888: fix cypress and kinetic compilation

Both platforms define its own MAX and cause redifination error if
common.h is included in driver.

* MRE: update mapping.yaml and fix direct pin mapping for TLE8888

* TLE8888: diagnnostic: disable switch off in case of overcurrent

For all output, use current limiting instead

* TLE8888: check for overvoltage on OUT8..OUT13

* TLE8888: add TODO note about how to recover from failure condition

Currently TLE8888 automaticly recovers only from overcurrent and
(may be) overtemperature conditions.
Short to bat cause output disable (bit in OECONFIG is reset) and
needs driver/host intervention.

* TLE8888: save few bytes of RAM

* TLE8888: Lada Kalina is test mule for IDLE stepper on TLE8888

Don't forget to enable PP mode for TLE8888 outputs 21..24:
uncomment line 1087 in tle8888.c

* TLE8888: reorder code, cleanup

* TLE8888: mode all debug/statisctic to per-chip struct

* TLE8888: rework poll interval calculation

* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888 #2
 2020-10-23 12:25:30 -04:00
GitHub build-firmware Action 7342b18291 Auto-generated configs and docs 2020-10-23 16:25:10 +00:00
rusefillc 804cf7f436 gettig ready for Tle8888 big update 1 #1892 2020-10-23 12:23:17 -04:00
GitHub build-firmware Action 36cf2d5e4c Auto-generated configs and docs 2020-10-23 11:33:40 +00:00
Matthew Kennedy dbdeca93b0 implement fuel pressure sensors (#1897) 
* add

* remove old

* remove more old

* makefile

* fix init

* patch up other stuff

* actually fix it this time

* raw output channels

* gauges, UI

* scaled channel

* fix field ordering
 2020-10-23 07:31:47 -04:00
rusefi 25189a70a8 B6 2020-10-23 00:39:22 -04:00
GitHub build-firmware Action 451d893a34 Auto-generated configs and docs 2020-10-23 03:26:03 +00:00
rusefillc 9ad38bd6a9 GDI Epic #1448 2020-10-22 23:24:15 -04:00
GitHub build-firmware Action eee55b77ec Auto-generated configs and docs 2020-10-23 03:19:42 +00:00
rusefillc fd30576dca GDI Epic #1448 2020-10-22 23:17:29 -04:00
GitHub set-date Action fd0d145a5b Update date 2020-10-23 00:55:50 +00:00
Matthew Kennedy e4c891f328 no sd enable (#1894) 
* no sd enable

* add assert

* Revert "no sd enable"

This reverts commit fd997381ee884c890fe7664e56ed2b0f0caef2ff.
 2020-10-22 20:51:28 -04:00
Andrey G 4c074fb9c8 common.h: define MIN and MAX macro only if nod defined yet (#1896) 
This fix compilation error for Kinetis and Cypress if common.h
is included after platform includes which also defines MIN MAX.
 2020-10-22 08:41:44 -04:00
rusefillc 2a8a0f6af1 GDI Epic #1448 2020-10-22 01:48:28 -04:00
rusefi 8c4dd19edd Merge remote-tracking branch 'origin/master' 2020-10-22 01:12:14 -04:00
rusefi 4af1bad726 progress 2020-10-22 00:57:11 -04:00
GitHub build-firmware Action 9ebd97289c Auto-generated configs and docs 2020-10-22 02:51:46 +00:00
Matthew Kennedy 38b6e9ba2b gppwm debug (#1895) 
* dbg gppwm

* fix channel

* TS guard
 2020-10-21 22:49:38 -04:00
GitHub build-firmware Action a9cad5c3f0 Auto-generated configs and docs 2020-10-22 02:37:10 +00:00
rusefi c43f7869d9 reducing the mess around FSIO bench commands 2020-10-21 22:35:08 -04:00
rusefi 73d53db758 code style 2020-10-21 22:13:18 -04:00
GitHub set-date Action ad515b0f14 Update date 2020-10-22 00:55:13 +00:00
Matthew Kennedy 8f6982dd54 disable i2c, other unused features (#1891) 
* dead

* more
 2020-10-20 22:24:32 -04:00
GitHub set-date Action c72bfdabe7 Update date 2020-10-21 00:54:27 +00:00
rusefi 79d267eba0 VAG radiator control 2020-10-19 23:25:23 -04:00
rusefi 69e48e1e44 code style 2020-10-19 22:47:09 -04:00
rusefi 4343f96fd4 refactoring 2020-10-19 22:44:44 -04:00
rusefi ca89cf9b95 GDI Epic #1448 2020-10-19 22:04:06 -04:00
GitHub set-date Action c25bf07abf Update date 2020-10-20 00:54:38 +00:00
GitHub build-firmware Action 782ffdaf6e Auto-generated configs and docs 2020-10-19 12:06:22 +00:00
Matthew Kennedy 4d1c331eca second PID config for wastegate (#1889) 
* remove

* cleanup

* implement ETB parts

* hook up to boost controller

* tests

* consume

* add cfg field

* ui maybe

* fix

* fix

* add wastegate config test
 2020-10-19 08:04:27 -04:00
Matthew Kennedy 5337d9f723 Etb wastegate hookup (#1888) 
* remove

* cleanup

* implement ETB parts

* hook up to boost controller

* tests
 2020-10-18 21:57:04 -04:00
GitHub set-date Action e4cab65723 Update date 2020-10-19 00:54:39 +00:00
Matthew Kennedy 8c11a6fb4b remove (#1887) 2020-10-18 20:49:42 -04:00
Matthew Kennedy 2c23085715 Etb function cfg: actually read config (#1884) 
* two throttles one thread

* look at all this RAM!

* add enum

* switch from index to function

* test fixup

* improve init logic

* remove old vw idle mode bit

* add config

* better spot for it

* use config init values

* handle null controller array

* fatal error testability

* test new init config

* defaults

* fix for default config
 2020-10-18 17:26:38 -04:00
GitHub set-date Action 79f02f09ce Update date 2020-10-18 00:55:31 +00:00
rusefi 1be1f66edf GDI Epic #1448 2020-10-17 20:17:53 -04:00
rusefillc c354d1deb2 dead legacy code - current implementation is definitely more correct 2020-10-17 18:46:07 -04:00
rusefillc 3314394dd9 refactoring: better method name 2020-10-17 18:45:08 -04:00
rusefillc aec48c294e GDI Epic #1448 2020-10-17 14:53:56 -04:00
Matthew Kennedy c73978310f Remove trigger listener list (#1886) 
* avoid 64b on hot path

* no tooth log when fast

* use crit section locker

* final

* only flip pins if not also self stim

* only trace if doing work

* slightly drop lateDelay

* trace if not bailing out

* remove listener array
 2020-10-17 08:00:11 -04:00
GitHub set-date Action 32e7391ffb Update date 2020-10-17 00:52:43 +00:00
rusefillc 54c3d0f15c HW CI has failed 11 times since Oct 2 #1849 2020-10-16 13:54:12 -04:00
rusefillc ac677ffd55 Merge remote-tracking branch 'origin/master' into master 2020-10-16 13:21:25 -04:00
Matthew Kennedy f6f3e514d2 trigger/scheduler perf improvements (#1885) 
* avoid 64b on hot path

* no tooth log when fast

* use crit section locker

* final

* only flip pins if not also self stim

* only trace if doing work

* slightly drop lateDelay

* trace if not bailing out
 2020-10-16 11:04:27 -04:00
Matthew Kennedy 87d34ffcee more safe parts probably (#1883) 2020-10-15 22:04:42 -04:00
GitHub set-date Action e82306deaa Update date 2020-10-16 00:53:08 +00:00
rusefillc 3ceb6fe2a5 Merge remote-tracking branch 'origin/master' into master 2020-10-15 16:16:51 -04:00
Matthew Kennedy 02c47eeec8 write SD header using new Writer class (#1882) 
* write header

* hooray, free memory!

* fix test

* is there really this much free space...?

* no, there is not
 2020-10-15 16:00:13 -04:00
GitHub build-firmware Action 2332ab26a0 Auto-generated configs and docs 2020-10-15 12:59:24 +00:00
Matthew Kennedy 94bd5921c5 simplify getTimeNowNt() (#1876) 
* remove old impl

* add cpp wrapper to os_access

* clean up os_access

* remove touchTimeCounter

* new impl

* put comment about lock free impl

* include cpp wrappers for BL

Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
 2020-10-15 08:57:13 -04:00
rusefillc a3614019f6 Merge remote-tracking branch 'origin/master' into master 2020-10-14 23:32:00 -04:00
GitHub build-firmware Action 7b4c02eb6c Auto-generated configs and docs 2020-10-15 02:42:20 +00:00
Matthew Kennedy eac2b179c7 fix temp sensor & validate it (#1879) 
* fix temp sensor & validate

* smaller here should work
 2020-10-14 22:39:16 -04:00
Matthew Kennedy abfa17216b etb function config 1 (#1881) 
* this should all be safe...

* test fix
 2020-10-14 22:02:09 -04:00
GitHub set-date Action ed3a341c89 Update date 2020-10-15 00:52:07 +00:00
rusefillc 08a867668c Merge remote-tracking branch 'origin/master' into master 2020-10-14 20:09:50 -04:00
Matthew Kennedy 4868068e2f start using BufferedWriter (#1878) 
* do the part up to actual usage

* borrow some memory for now
 2020-10-14 20:06:05 -04:00
Matthew Kennedy 554304dac3 switch to single precision constants (#1880) 
* adjust builds

* fix test
 2020-10-14 20:04:35 -04:00
GitHub set-date Action 9df7b80835 Update date 2020-10-14 00:51:46 +00:00
rusefillc a37880eb97 GDI Epic #1448 2020-10-13 00:35:04 -04:00
GitHub set-date Action 97663a0594 Update date 2020-10-13 00:51:50 +00:00
Matthew Kennedy c5291888d0 buffered writer - progress on #1463 (#1875) 
* add buffered writer

* rename
 2020-10-12 15:10:34 -04:00
rusefillc 1dcfa743b9 docs 2020-10-12 09:18:36 -04:00
rusefi 9de3031378 GDI Epic #1448 2020-10-11 23:39:40 -04:00
rusefi 996806d710 QC control mode to crash if RPM = 0 and to mark successful 3 minute test with self-stimulation RPM increase #1871 2020-10-11 22:57:31 -04:00
rusefi 1c84b0dd9f QC control mode to crash if RPM = 0 and to mark successful 3 minute test with self-stimulation RPM increase fix #1871 2020-10-11 22:46:08 -04:00
GitHub set-date Action 3df68f838c Update date 2020-10-12 00:51:55 +00:00
Matthew Kennedy 3985b7a6c9 Fix #1873 - compute dynamic PWM iterationLimit (#1874) 
* fix

* remove define

* add an assert

* typo

* don't do a 64bit divide

* oh that's a float
 2020-10-11 20:25:38 -04:00
rusefi b4208f585c QC control mode to crash if RPM = 0 and to mark successful 3 minute test with self-stimulation RPM increase #1871 2020-10-11 19:16:41 -04:00
GitHub build-firmware Action 08d03374d4 Auto-generated configs and docs 2020-10-11 23:07:39 +00:00
rusefi 4743718663 QC control mode to crash if RPM = 0 and to mark successful 3 minute test with self-stimulation RPM increase #1871 2020-10-11 19:05:56 -04:00
rusefi 6fe1f18067 Trigger sync lost every 2^32 CPU cycles #1873 
only a random code comment
 2020-10-11 18:17:30 -04:00
GitHub build-firmware Action b537290fdb Auto-generated configs and docs 2020-10-11 21:49:05 +00:00
rusefi df378f8f45 GDI Epic #1448 2020-10-11 17:47:16 -04:00
GitHub set-date Action a5babfa28a Update date 2020-10-11 00:52:48 +00:00
rusefi dd9b8ee62b poke 2020-10-10 00:07:15 -04:00
GitHub build-firmware Action cb71a9ba23 Auto-generated configs and docs 2020-10-10 03:36:50 +00:00
David Holdeman a6a0e8ba77 Simple transmission 2 (#1870) 
* simple trans controller

* don't need check

* we can loop!

* use efi::size

* pin mode configuration

* set pin mode

* switch to RegisteredOutputPin

* size

* add to makefile

* fixes

* fixes

* wat

* output pin, and ts stuff

* use SimpleTransmissionController

* include

* grrr

* grrr

* move to separate file

* fix includes

* try

* semicolon stupid

* try pointers

* try

* add to makefile

* wat

* try

* try

* try

* try

* try

* try

* try

* try

* try

* try

* try

* try

* try

* try

* undo

* more idiomatic maybe

* remove logger

* try init func

* try

* try

* try init fn

* try

* switch

* try

* try

* ifndef

* try

* try

* ifndef

* use def dug

* INJECT FIRST

* try

* try

* duh
 2020-10-09 23:34:45 -04:00
GitHub set-date Action c646fe2be7 Update date 2020-10-10 00:50:10 +00:00
GitHub build-firmware Action c6d12d8459 Auto-generated configs and docs 2020-10-09 21:19:04 +00:00
Matthew Kennedy 51d407aaf0 ign mode overrides (#1869) 2020-10-09 17:16:49 -04:00
GitHub build-firmware Action f01583be7a Auto-generated configs and docs 2020-10-09 06:11:02 +00:00
rusefillc 6395e22ce6 https://rusefi.com/forum/viewtopic.php?f=4&t=1844 2020-10-09 02:08:52 -04:00
GitHub build-firmware Action e3cfc760d0 Auto-generated configs and docs 2020-10-09 06:07:46 +00:00
rusefillc 8e69003080 https://rusefi.com/forum/viewtopic.php?f=4&t=1844 2020-10-09 02:05:47 -04:00
Matthew Kennedy 89ac8508b9 Check for sd buffer overrun (#1867) 
* use actual header size

* and the buffer can be a little smaller
 2020-10-08 21:02:15 -04:00
GitHub set-date Action c7879cef42 Update date 2020-10-09 00:49:56 +00:00
rusefillc a20f093140 SD card logs not valid for REO #1864 2020-10-08 20:35:32 -04:00
rusefillc b1c0b72aa7 SD card logs not valid for REO #1864 2020-10-08 20:17:32 -04:00
rusefillc 08efb1f43d SD card logs not valid for REO #1864 2020-10-08 20:06:07 -04:00
rusefi af19c020c7 SD card logs not valid for REO #1864 2020-10-08 17:58:58 -04:00
rusefi a2f3ee8d06 SD card logs not valid for REO #1864 2020-10-08 17:50:43 -04:00
rusefillc 53c001d541 revering functional part of 
Etb function cfg, try again #1860
try again from #1831
 2020-10-08 17:09:00 -04:00
GitHub build-firmware Action 054b082355 Auto-generated configs and docs 2020-10-08 18:14:09 +00:00
Matthew Kennedy cca175c6ea Etb function cfg, try again (#1860) 
* two throttles one thread

* look at all this RAM!

* add enum

* switch from index to function

* test fixup

* improve init logic

* remove old vw idle mode bit

* add config

* better spot for it

* use config init values

* handle null controller array

* fatal error testability

* test new init config

* defaults

* fix for default config
 2020-10-08 14:12:03 -04:00
Matthew Kennedy 732e2a64c1 fix fuel pump (#1865) 2020-10-07 22:30:24 -04:00
GitHub set-date Action 16eff072d2 Update date 2020-10-08 00:41:29 +00:00
Matthew Kennedy b9c26efd57 fix (#1863) 2020-10-07 14:59:24 -04:00
Matthew Kennedy 22a55ce7e6 switch from float to expected<float> (#1862) 2020-10-06 22:33:00 -04:00
Matthew Kennedy 7b333e60ea FSIO refactoring (#1861) 
* better fsio tests

* condense operators

* minor parser cleanup too

* comments, too!
 2020-10-06 21:54:49 -04:00
GitHub set-date Action c7c70bc87a Update date 2020-10-07 00:49:32 +00:00
rusefillc 25d02f6356 SD enable 2020-10-06 01:15:17 -04:00
rusefillc d5d5bbba9f tachPulsePerRev needs a safer default, MRE config needs a value 2020-10-06 00:56:49 -04:00
GitHub set-date Action bdbc8ef46f Update date 2020-10-06 00:48:58 +00:00
Matthew Kennedy e112bbd07e remove virtual calls from hot path (#1857) 
* const ref-ify

* no virtual ❌

* even more const

* tests

* fix tests
 2020-10-05 16:42:50 -04:00
Matthew Kennedy 060cfbd778 const ref-ify trigger (#1856) 
* const ref-ify

* tests
 2020-10-05 14:22:59 -04:00
Matthew Kennedy 540fca8cc9 use expected for event queue next event (#1859) 
* use expected for event queue next event

* minor cleanup

* tests
 2020-10-05 13:53:34 -04:00
Matthew Kennedy 60329b55a5 we don't need two loops (#1855) 2020-10-05 08:57:00 -04:00
Matthew Kennedy 04ae4ee347 pwm perf (#1858) 
* pwm perf

* this trace is now redundant
 2020-10-05 08:23:30 -04:00
Matthew Kennedy da3242f2fc missing iat (#1854) 2020-10-04 21:33:54 -04:00
GitHub set-date Action 41e49ff53c Update date 2020-10-05 00:50:15 +00:00
Matthew Kennedy ebc884e8d5 trigger decode cleanup and perf (#1853) 
* trigger decode cleanup

* test config ptr patchup

* disable CDM by default
 2020-10-04 19:29:26 -04:00
rusefillc ac94bcae5e get_performance_trace automation 2020-10-04 16:03:35 -04:00
rusefillc 9808e675f5 Trigger performance: variable gapTrackingLength #1851 
cool change but looks to have made zero difference
 2020-10-04 13:05:49 -04:00
rusefillc bfbdab4b5f poke 2020-10-04 12:58:16 -04:00
rusefillc 61186a8d80 fixing Kinetis build 2020-10-04 03:04:01 -04:00
rusefillc e6bac27c70 60/2 perf grab #1850 
unused parameter
 2020-10-04 02:09:12 -04:00
rusefillc c1023504e6 Re-applying #1841 
Revert "HW CI has failed 11 times since Oct 2 #1849"

This reverts commit 7d8238e6
 2020-10-04 01:54:29 -04:00
rusefillc 8c32b13567 60/2 perf grab #1850 
a) removing more of stack validating - one validation within the deepest method would be enough

b) un-wrapping main callback loop for explicit order of execution
 2020-10-04 01:43:02 -04:00
rusefillc edc8ee7299 60/2 perf grab #1850 2020-10-04 01:26:29 -04:00
rusefillc 149bc309f7 60/2 perf grab #1850 2020-10-04 01:04:15 -04:00
rusefillc d9102b3c3c 60/2 perf grab #1850 2020-10-04 00:15:40 -04:00
GitHub build-firmware Action a21a27898b Auto-generated configs and docs 2020-10-04 02:02:15 +00:00
rusefillc aee984d0c2 HW CI has failed 11 times since Oct 2 #1849 
Revert "ETB function config (#1831)"

This reverts commit fd7dae8a
 2020-10-03 22:00:00 -04:00
rusefillc 7d8238e697 HW CI has failed 11 times since Oct 2 #1849 
Revert "configure all sample times - fix MRE knock sampling (#1841)"

This reverts commit e02c86a7
 2020-10-03 21:36:09 -04:00
rusefillc b4fb172b06 Merge remote-tracking branch 'origin/master' into master 2020-10-03 20:53:29 -04:00
rusefillc 88e9dcd867 HW CI has failed 11 times since Oct 2 #1849 2020-10-03 20:53:23 -04:00
GitHub set-date Action 8957a9f13d Update date 2020-10-04 00:51:05 +00:00
rusefillc bd78aa288d HW CI has failed 11 times since Oct 2 #1849 2020-10-03 20:25:37 -04:00
rusefillc 731341dad1 HW CI has failed 11 times since Oct 2 #1849 2020-10-03 19:45:39 -04:00
GitHub build-firmware Action b339ad71bc Auto-generated configs and docs 2020-10-03 23:29:56 +00:00
rusefillc 6cae262934 HW CI has failed 11 times since Oct 2 #1849 2020-10-03 19:28:21 -04:00
GitHub build-firmware Action c67f26e863 Auto-generated configs and docs 2020-10-03 14:42:14 +00:00
rusefillc 3be325f78d Merge remote-tracking branch 'origin/master' into master 2020-10-03 10:39:54 -04:00
rusefillc c9bdd59220 new VVT trigger shape? #1847 2020-10-03 10:39:43 -04:00
GitHub build-firmware Action 5d006198eb Auto-generated configs and docs 2020-10-03 14:27:55 +00:00
rusefillc 601865bc4b new VVT trigger shape? #1847 2020-10-03 10:26:05 -04:00
GitHub build-firmware Action 279e1c008d Auto-generated configs and docs 2020-10-03 14:06:31 +00:00
rusefillc 38c1456afb https://rusefi.com/forum/viewtopic.php?p=38001#p38001 2020-10-03 10:04:04 -04:00
GitHub build-firmware Action 905edb2fd4 Auto-generated configs and docs 2020-10-03 00:52:49 +00:00
Matthew Kennedy fd7dae8ab8 ETB function config (#1831) 
* two throttles one thread

* look at all this RAM!

* add enum

* switch from index to function

* test fixup

* improve init logic

* remove old vw idle mode bit

* add config

* better spot for it

* use config init values

* handle null controller array

* fatal error testability

* test new init config

* defaults

* fix for default config
 2020-10-02 20:51:02 -04:00
Matthew Kennedy e02c86a7dc configure all sample times - fix MRE knock sampling (#1841) 
* configure all sample times

* smpr 1 vs smpr 2

* man I can't type

Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
 2020-10-02 20:49:56 -04:00
GitHub set-date Action 3135cfec0a Update date 2020-10-03 00:47:49 +00:00
GitHub build-firmware Action b96af6ce25 Auto-generated configs and docs 2020-10-02 18:35:16 +00:00
rusefillc 563f7d9091 https://rusefi.com/forum/viewtopic.php?p=37989#p37989 2020-10-02 14:33:19 -04:00
GitHub set-date Action 3f16bbb1ff Update date 2020-10-02 00:47:06 +00:00
Matthew Kennedy 5f6955e49f move scheduling to its own file (#1842) 
* move scheduling to its own file

* header

* protip don't include a cpp file
 2020-10-01 17:55:03 -04:00
Matthew Kennedy a11338d642 print red (#1843) 2020-10-01 17:14:25 -04:00
Matthew Kennedy c1cb48ed12 switch (#1839) 
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
 2020-10-01 01:36:33 -04:00
GitHub build-firmware Action 9e72221dab Auto-generated configs and docs 2020-10-01 04:06:05 +00:00
rusefi f8d5463064 making error codes available 2020-10-01 00:03:54 -04:00
GitHub set-date Action 609fe10a93 Update date 2020-10-01 00:49:04 +00:00
GitHub build-firmware Action 7a89a29b3d Auto-generated configs and docs 2020-10-01 00:21:49 +00:00
Matthew Kennedy 3e64861c14 display base fuel mass in milligrams (#1838) 
* switch to mg

* use the correct thing

* gauge scaling

Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
 2020-09-30 20:19:51 -04:00
GitHub build-firmware Action 6cd260a6a2 Auto-generated configs and docs 2020-09-30 23:20:30 +00:00
Matthew Kennedy 8520a128bb show SD menu on proteus (#1837) 
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
 2020-09-30 19:18:37 -04:00
GitHub set-date Action 7d84ea1f2f Update date 2020-09-30 00:47:11 +00:00
rusefi d09d2da420 Cypress artifact needs .hex file #1835 2020-09-29 18:50:51 -04:00
David Holdeman 37f439390e add hex to bundle (#1836) 2020-09-29 17:04:41 -04:00
GitHub build-firmware Action 7798a449aa Auto-generated configs and docs 2020-09-29 10:36:50 +00:00
Matthew Kennedy 3374db1658 Remove dead & useless config (#1834) 
* remove dead config

* remove enum
 2020-09-29 06:34:39 -04:00
GitHub build-firmware Action 31897313af Auto-generated configs and docs 2020-09-29 01:41:06 +00:00
David Holdeman a564ca0526 transmission solenoid control (#1833) 
* simple trans controller

* don't need check

* we can loop!

* use efi::size

* pin mode configuration

* set pin mode

* switch to RegisteredOutputPin

* size
 2020-09-28 21:39:03 -04:00
GitHub build-firmware Action 07532d6b4c Auto-generated configs and docs 2020-09-29 01:20:53 +00:00
rusefi 2836954b9c adding 1+16 trigger 2020-09-28 21:18:47 -04:00
rusefi bd82ae0d9a refactoring: magic constants 2020-09-28 21:11:04 -04:00
GitHub build-firmware Action 2f7a60c5a8 Auto-generated configs and docs 2020-09-29 01:07:43 +00:00
rusefi f2f1ef81d5 removing third copy of same values 2020-09-28 21:05:20 -04:00
rusefi bd90955626 Merge remote-tracking branch 'origin/master' into master 2020-09-28 20:59:58 -04:00
rusefi bfc9ebd730 removing third copy of same values 2020-09-28 20:58:21 -04:00
GitHub set-date Action c16b14606e Update date 2020-09-29 00:46:48 +00:00
David Holdeman e6f6c43767 switch to pass by reference (#1832) 2020-09-28 19:17:17 -04:00
David Holdeman 0f7b91861a move cd statements to common_make.sh (#1830) 
* move cd to compile.sh

* rel path

* undo changes to compile.sh and move cd to common_make
 2020-09-28 18:25:15 -04:00
GitHub build-firmware Action f1527ea660 Auto-generated configs and docs 2020-09-28 20:34:48 +00:00
Matthew Kennedy b79c0fefe5 replace ETB index with function enum (#1807) 
* two throttles one thread

* look at all this RAM!

* add enum

* switch from index to function

* test fixup

* improve init logic

* remove old vw idle mode bit
 2020-09-28 16:33:07 -04:00
GitHub build-firmware Action 631d719b59 Auto-generated configs and docs 2020-09-28 18:47:21 +00:00
Matthew Kennedy 9632a784f3 add analog inputs to switches (#1829) 
* add analog in to switches

* also clarify boost cut pressure

Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
 2020-09-28 14:45:23 -04:00
GitHub set-date Action 26dcb75c83 Update date 2020-09-28 00:47:27 +00:00
GitHub build-firmware Action 695eacc239 Auto-generated configs and docs 2020-09-27 15:03:29 +00:00
rusefillc 73171347d0 Update rusefi_config.txt 2020-09-27 11:01:42 -04:00
rusefillc ca39692756 Update gen_config.sh 2020-09-27 11:01:06 -04:00
rusefi c874a6c914 Hellen gen_config #1823 poke 2020-09-27 10:42:01 -04:00
andreika-git 967fda4027 Hellen says fix gen_enum_to_string & gen_config (#1825) 
* Hellen says merge #1772 hardware.cpp

* Hellen says merge #1772 adc.h

* Hellen says fix gen_enum_to_string & gen_config

Co-authored-by: rusefi <rusefillc@gmail.com>
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
 2020-09-27 10:40:37 -04:00
David Holdeman 66f4516990 cd back (#1826) 2020-09-27 10:40:18 -04:00
GitHub build-firmware Action e3c1501830 Auto-generated configs and docs 2020-09-27 13:59:42 +00:00
rusefi beb449b755 Hellen gen_config #1823 poke 2020-09-27 09:57:52 -04:00
andreika-git 3db4d3a56f Hellen says fix gen_config for Cypress (#1824) 
* Hellen says merge #1772 hardware.cpp

* Hellen says merge #1772 adc.h

* Hellen says fix gen_config for Cypress

* Hellen says fix gen_config actions for Cypress

* Hellen says reset .h files

Co-authored-by: rusefi <rusefillc@gmail.com>
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
 2020-09-27 09:56:44 -04:00
GitHub build-firmware Action 8ba9764177 Auto-generated configs and docs 2020-09-27 12:51:50 +00:00
rusefi 51d9e3178e Hellen config build - poke 2020-09-27 08:50:12 -04:00
rusefi 21f53352b9 Hellen config build 2020-09-27 08:21:33 -04:00
rusefi 79199dfd82 Output pin init/deinit needs a linked list #1803 2020-09-27 07:58:22 -04:00
rusefi 86c80b7768 Output pin init/deinit needs a linked list #1803 2020-09-27 07:48:38 -04:00
GitHub build-firmware Action 3d5cb35c5e Auto-generated configs and docs 2020-09-27 11:38:53 +00:00
rusefi f482b9c43d Output pin init/deinit needs a linked list #1803 2020-09-27 07:37:43 -04:00
rusefi aea8441e6a Output pin init/deinit needs a linked list #1803 2020-09-27 07:26:56 -04:00
rusefi 77c1b19cee Output pin init/deinit needs a linked list #1803 2020-09-27 07:22:09 -04:00
rusefi 15cb74bbf8 cypress into GHA #1819 
code style match
 2020-09-27 07:07:01 -04:00
rusefi 940086ee34 cypress into GHA #1819 2020-09-27 06:43:32 -04:00