* Drop SingleChannelStateSequence in favor of MultiChannelStateSequenceWithData
Most all the users were Multi* anyways, so just improve that:
1. Allow up to 8 waveforms to share one byte per timestamp. It could be better but this is simple
and gets most of the benefit.
2. Use a wrapper structure to handle reserving space for the arrays. Makes the interface simpler
and more rigid. Also saves 4 bytes per Multi*. Downside is access is now via -> and *,
not . and (nothing).
Saves 224 bytes of BSS, 1832 bytes of RAM4/CCM, 952 bytes of TEXT, and 103 bytes of RODATA
* Instantiate a base_t to make debugging easier.
Also fixes crash on real firmware by using &m_base instead - LTO optimization issue?
* No magical templated StaticAlloc thingy. Just virtual functions.
* Basic framework for high pressure fuel pump control
* Many changes
Move calculations to fast callback
Move main object into Engine
Respond to pin changes without requiring a reboot
* Use EngineModule for HpfpController
Schedule pin off after executing pin on so we are sure it ends, even if the motor stops.
Test scheduling.
Less RAM use by only having one event and reordering fields.
* Make scheduling test actually useful - need non-0 activation angle.
Co-authored-by: rusefillc <48498823+rusefillc@users.noreply.github.com>
* Programmatically remove EnginePtr/inject, EXPAND_Engine, and WITH_ENGINE_TEST_HELPER*
for i in ": public EnginePtr " ", public EnginePtr" "EXPAND_Engine;" "EXPAND_Engine"; do
git grep -l "$i" | xargs sed -i "s/$i//g"
done
git grep -l "inject" | xargs sed -i "/inject[(][)]/d"
for i in WITH_ENGINE_TEST_HELPER_SENS WITH_ENGINE_TEST_HELPER_BOARD_CALLBACK WITH_ENGINE_TEST_HELPER; do
git grep -l "$i" | xargs sed -i "s/$i/EngineTestHelper eth/g"
done
git checkout firmware/controllers/core/engine_ptr.h
git checkout unit_tests/global.h
* Review fixups.
All it wants is to use the main trigger state, so don't bother copying it. Instead, change
PwmConfig to take a const pointer to a Multi.*Sequence, then make all the users adapt. Worse
fallout is that SimplePwm now has its own Multi.*Sequence, but PwmConfig is downgraded to a
pointer, so that's only a net +4 bytes. And we can make the overhead of Multi.*Sequence much lower
using embedded arrays, which only the caller can do since it knows the maximum size... (for another
day...)
Also remove SimplePwm's 2nd copy of SingleChannelStateSequence. It served no purpose.
Saves 1992 bytes of BSS and 24 bytes of RAM4 (latter probably due to SimplePwm change)
All it wants is to use the main trigger state, so don't bother copying it. Instead, change
PwmConfig to take a const pointer to a Multi.*Sequence, then make all the users adapt. Worse
fallout is that SimplePwm now has its own Multi.*Sequence, but PwmConfig is downgraded to a
pointer, so that's only a net +4 bytes. And we can make the overhead of Multi.*Sequence much lower
using embedded arrays, which only the caller can do since it knows the maximum size... (for another
day...)
Also remove SimplePwm's 2nd copy of SingleChannelStateSequence. It served no purpose.
Saves 1992 bytes of BSS and 24 bytes of RAM4 (latter probably due to SimplePwm change)
* fix simulator
* print out halt reason
* option to close simulator after time
* workflow calls it
* test with the bug still present
* ...and fix the bug
* fix for stepperHbridgeHardware
* new config fields for microstepping
* add stepper dir pin mode to the dialog
* refactor stepper hw dialog & add microstepping panel
* microstepper modes enum
* stepperDcInvertedPins needed by Hellen
* add sleep() for stepper and divisor for pause()
* microstepping impl.
* make unit-tests more happy
* small progress
* fix etb-stepper dlg conflict
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
* big pch energy
* put back ramdisk stub
* tests are happy
* h743 nucleo
* kinetis
* I love deleting code!
* make stepper happy
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
Andrey
rusefillc
Scott Smith
Matthew Kennedy
Andreika