270905fa8b
removing dead code
2021-06-23 04:26:32 -04:00
25168809f3
performance optimization by dron0gus
2021-06-21 09:27:09 -04:00
d7789bc2a0
those and many other offsets are no longer correct
2021-06-21 02:11:36 -04:00
c77686ce3b
gauges for raw TPS ( #2831 )
...
* ecu part
* gauges
* debug info for ford throttle
* sensible order
2021-06-18 16:27:44 -04:00
ba8ad555c2
reverting TCU cherry pick
2021-06-12 13:52:18 -04:00
aa9f609df5
random trick
2021-06-12 13:48:37 -04:00
9caa794e6c
TCU cherry
2021-06-11 23:48:57 -04:00
68d2fdb6ce
https://rusefi.com/forum/viewtopic.php?f=16&t=2027
2021-05-27 05:50:59 -04:00
4b0d75ff92
make the simulator usable ( #2717 )
...
* these start themselves now
* dead
* configure ports
* start serial
* dead
* minimal pins
* simulator logging works
* why not enable lua
* speeeeeed
* start lua
* spammy print
2021-05-17 12:44:02 +03:00
6d849d05c7
Hw layer rearrangement ( #2703 )
...
* max31855: move to sensors
* uart GPS driver: move to sensors and rename
* i2c_bb: move to drivers
* LCD HD44780: move to drivers
* ping?
2021-05-16 06:01:00 -04:00
ad505bfb1b
idle indicators ( #2692 )
...
* add coasting bit
* remove useless bit
2021-05-13 17:35:00 -04:00
047f62b2b9
remove deprecated getEngineLoadT ( #2676 )
...
* remove
* few more
2021-05-10 08:30:41 -04:00
76f2f063d2
Maf in sensor model ( #2672 )
...
* init
* consumers
* hasMafSensor
* consumers
* remove
* remove
* s
* guard
* tiny bit of ram
* ram
2021-05-09 20:59:06 -04:00
dd46591ad5
hip9011 ( #2658 )
...
* hip9011: isolate debug stuff
* hip9011: renames
* hip9011: start sensing knockDetectionWindowStart degres from fire
* engine: more realistic values for knock window
* hip9011: remove magic CS toggling
* hip9011: EFI_HIP_9011_DEBUG should depend on EFI_HIP_9011
2021-05-08 18:43:55 -04:00
d7f9d42e07
Hook up multi bank fuel trim ( #2532 )
...
* multi bank trim
* cleaning
* output channels
* output channels
2021-05-08 17:41:50 -04:00
4b9dd02056
check MCU flash size at runtime fix #2648
2021-05-07 17:05:47 -04:00
f2a194e035
Kill warnings ( #2623 )
...
* dead code
* rtc_helper: clean-up warnings
* kill unused
2021-05-04 18:55:27 -04:00
2176d1656b
ADC: internalIndex should be used as getAvgAdcValue argument ( #2618 )
...
* ADC: internalIndex should be used as getAvgAdcValue argument
-plus output messages re-formated
* ADC: logger -> efiPrintf
2021-05-03 16:44:19 -04:00
87e0b28cc4
https://rusefi.com/forum/viewtopic.php?f=16&t=1996
2021-04-25 09:18:35 -04:00
7300bbe750
improving QC process
2021-04-23 00:45:36 -04:00
6c75a3d7b4
improving QC process
2021-04-22 22:04:39 -04:00
be0f2210c5
improving QC process
2021-04-22 21:23:20 -04:00
737ee444b8
rip the bandaid: find-replace most of scheduleMsg ( #2572 )
...
* biiiig find replace
* more trivial find replace
* pwm
* almost all of them
* few more
* gpio
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-21 12:53:13 -04:00
8cfb63455d
Logging remove 3 ( #2568 )
...
* ts logger
* sensors
* wideband too
* missed one
* init
* motors, pid, etc
* vvt
* more
* idle
* missed one
* dynoview
* launch
* can
* console IO
* s
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-20 14:09:41 -04:00
967383dd8e
remove simple cases of LoggingWithStorage ( #2569 )
...
* remove simple cases
* more simple
* serial
* s
* more
* try memory
* easy
* mmc acc
* that's how much memory
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-19 08:11:59 -04:00
177f3afd05
ts logger ( #2566 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-18 19:13:48 -04:00
1c4c7fe62c
remove duplicate SD log fields ( #2556 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-15 01:07:59 -04:00
774f4416a7
constexpr-ify log field list ( #2548 )
...
* constexprify
* reclaim ram
* more constexpr
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-13 20:16:18 -04:00
d7e95cd31f
improve sensor chart flush behavior ( #2545 )
...
* disable sensor chart
* type signature, guards
* we can't log the message as that confuses the parser
* dead
* this syntax was technically illegal
* more
* turn it back on
* remove config
* api
* implement
* ui
* java ui
2021-04-12 14:05:52 -04:00
96e655ff4e
sd buffer ( #2540 )
2021-04-11 10:15:54 -04:00
b20ead8d18
More binary log fields ( #2518 )
...
* gauge names
* binary log
* it only takes scaled channel
2021-04-03 20:28:55 -04:00
112b4d1182
Hip9011 ( #2512 )
...
* hip9011: coexistance with other spi devices
* hip9011: rework so SPI transfer is invoked from thread
also use polling spi exchange to avoid cache problems
* hip9011: move calculations from ADC callback to thread
* hip9011: big cleanup
* hip9011: simplify spi communication
* No need to set knockBandCustom if it is not custom
HIP9011 calculates knockBand from cylinderBore same way
* hip9011: make unit test happy
* hip9011: fix unit test
* hip9011: remove duplicated initialization, reorder
* hip9011: just renames and data type adjustments
* hip9011: rename BAND() to HIP9011_BAND()
* hip9011: move some code from lookup.cpp to logic.cpp
* hip9011: move initEngineNoiseTable to engine_configuration.cpp
* hip9011: move lookup tables to hip9011_logic.c
* hip9011: remove empty files
* hip9011: additional checks
2021-03-30 10:56:25 -04:00
72dac58f9b
fix multi-serial-port insanity ( #2476 )
...
* carve out UART specific
* implement channel
* config cleanup
* use new config
* bootloader
* dead code
* s
* h7 inherits f7
* oops
* ok now it's right
* tests
* cleanup
* call setup
* put that in its own file
* cleanup
* format
* guard
* not needed
* improve guarding
* portable
* allow override of uart mode
* fixes for bootloader
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-28 09:06:36 -04:00
ce142907a0
replace print/printMsg with scheduleMsg ( #2497 )
...
* start cleaning
* disabled feature means don't print that it's disabled
* cli
* usages
* printMsg -> scheduleMsg
* this is alllll dead now
* no crlf please
* all hope is lost if you manage to hit this line
* tests
* tests
* ok we did actually need that part
* sim
* d
* kinetis
* it did ifdef, not if
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-26 17:23:26 -04:00
368415972e
read configuration from flash exactly once ( #2481 )
...
* early hw init
* s
* read configuration exactly once
* cleanup
* housekeeping
* test friendly
* ugh bad merge
* that is a noop
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-25 18:16:26 -04:00
4e1d30f86d
plumbing for multiple vvt ( #2488 )
...
* plumb multiple vvt
* fix test
* s
* fix barra while we're at it
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-25 07:39:23 -04:00
7cdad67f3f
USB uses its own channel, add implementations for serial channels ( #2472 )
...
* USB uses its own channel
* revise channels
* put serial ports in their own file
* h7 uart incompatible for now
* guard for sim
2021-03-19 17:05:04 -04:00
2bf833a1ee
Usable fuel consumption data/gauges ( #2474 )
...
* fuel consumption
* gauge names
* consumers
* obd
* binary logging
* doesn't need explicit constructor
* getters
* it works
* correct for injections per cycle
* datalog
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-19 17:04:42 -04:00
5e6746c3aa
Implement nonlinear fuel level sender ( #2473 )
...
* table function
* config fields
* sensor type
* switch consumers
* init the sensor
* ui
* 1mv resolution
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-19 08:39:08 -04:00
cb33bb77ae
Dedicated code path for USB console/TS ( #2465 )
...
* new apis
* dedicated USB path
* move decl
* init
* don't init usb twice
* guard
* check that we're initialized before using TS
* comment
* guard
* guard USB
* brain doesn't go good
* make tests happy
* dead define
* cypress
* ifdef != if
* s
* include priority
* don't start a thread we know we don't need
* bad-ish merge
* const
* why did this code exist...?
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-18 14:07:22 -04:00
925a6ca086
harden against various no-boot scenarios ( #2468 )
...
* zero length trigger
* validate config
* validate cylinder count
* wrong type on cylinder count
* invalid comment
* invalid SPI
2021-03-17 09:24:13 -04:00
34b678728a
extract CAN TS channel ( #2469 )
...
* extract CAN channel
* this is gross
2021-03-17 08:39:13 -04:00
a26002bc02
type signature, guards
2021-03-15 17:11:11 -04:00
212b9d6684
fix error/warning buffer overflow #2456
2021-03-14 09:52:27 -04:00
962e0b32e7
fix error/warning buffer overflow ( #2456 )
...
* fix error printing overflow
* make the worst offender shorter
* error as warning
* these don't need that flag set
2021-03-14 09:31:11 -04:00
943e6078c8
logging cleanup before refactor ( #2438 )
...
* minor cleanup
* more cleaning
* signature
* spelling
* doy
2021-03-09 08:43:29 -05:00
d7536bf059
finish off vbatt -> sensor model ( #2433 )
...
* more vbatt
* s
* goodbye voltage
* makefile
* apparently that part was in use
* include
* mocking
2021-03-07 20:18:32 -05:00
f8747a35bf
set all thread priorities in the same place ( #2412 )
...
* unify thread priority
* header
* mmc
2021-02-28 07:30:45 -05:00
726be2232e
yet more TS sanity ( #2382 )
...
* ts cleanup part 1
* move more stuff in to the class
* extract base class
* switch to TsChannelBase where we can
* dfu
* more to TsChannelBase
* bad merge
* another bad merge
* bootloader
* bluetooth
* format
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-20 02:11:39 -05:00
12a31e5132
start making tunerstudio more sane: part 2 ( #2381 )
...
* ts cleanup part 1
* move more stuff in to the class
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-19 20:48:21 -05:00
10efd25764
dead code ( #2379 )
...
* dead code
* do nothing
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-19 07:58:52 -05:00
43f39fa616
start making tunerstudio more sane: part 1 ( #2378 )
...
* ts cleanup part 1
* unused unused
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-19 07:40:59 -05:00
483bee389b
https://github.com/andreika-git/hellen-one/issues/3
2021-02-17 10:18:46 -05:00
06dc9a9210
happy new year
2021-02-16 21:44:55 -05:00
c75af2ac75
properly put buffers in no-cache regions ( #2357 )
...
* configure for no cache
* this doesn't need a setting
* now we don't need invalidate
* reorder and comment
* mmc
* sw knock
2021-02-15 17:39:11 -05:00
a576c2e109
USB mass storage tweaking ( #2352 )
...
* disable TS in case of USB MSD
* housekeeping while we're here
* enable on MRE
* changelog
2021-02-14 15:03:07 -05:00
71d68b51f4
cleanup too while we're at it ( #2336 )
2021-02-12 20:27:43 -05:00
1012b61e02
M62T vanos support #2243
2021-02-08 20:38:38 -05:00
983d75444e
baro in sensor model ( #2306 )
...
* baro in sensor model
* missed
* typo
* init baro
* needs an include there
2021-02-07 17:54:41 -06:00
04c7ad67aa
Some fixes prior to board pull request ( #2291 )
...
* ChibiOS: add support for STM32F765
This chip is used on Subaru EG33 p'n'p RusEFI board from Dron_Gus
* drivers: gpio: mc33810: commulative update
- use BIT macro
- fix wake-up method
- fix order of arguments in _add function
* port: stm32f4/7: detectCanDevice check for enabled interfaces only
* ADC: fix internal array size
internalAdcIndexByHardwareIndex should be EFI_ADC_LAST_CHANNEL size
couse adc_channel_e is used as index
* status LEDs: support status LEDs that driven by low level
2021-02-06 12:22:57 -05:00
cd03443dea
Limp handles inj/ign disable ( #2245 )
...
* status loop just asks limp mgr
* put logic in limp manager
* don't need that function any more
* bye
* TIL these bits already exist in the configuration
2021-01-27 21:28:53 -05:00
de5a98880a
limp mode too good for bench testing #2244
2021-01-27 00:02:37 -05:00
27905c6817
Chibi os 20 ( #2212 )
...
* Update ChibiOS
* Fix Makefiles includes paths
* halconf.h: remove flash hack
* mcuconf: fix EXTI ptiorityes
* Digital Input: ICU: use designated initializers, initialize 'arr'
* ChibiOS: lis302dl fix
* ADC: update to new API
* UARTConfig: timeout_cb field, formating
* ChibiOS: remove _exit, _kill, _getpid
* Fix lis302dl
* Bump config versions
* chconfig_common: cosmetic changes
* stm32f4ems: commulative config update
* Update Simulator
* ALLCSRC already contain all needed ChibiOS files.
Same for ALLINC and ALLCPPSRC
* ChibiOS fix for Simulator
* ChibiOS: port lock/unlock hook and MMC over SPI timeout
* STM32F7: update configs
* STM32F7: update linker file
* Cypress: port ADC lld to ChibiOS-20
* Cypress: port SPI lld to ChibiOS-20
* Cypress: port CAN lld to ChibiOS-20
* Cypress: fix include path for rules.ld
* Cypress: update chconf.h and halconf.h for ChibiOS-20
* Kinetis: update ADC lld to ChibiOS-20
* Kinetis: update SPI lld to ChibiOS-20
* Kinetis: update UART lld driver for ChibiOS-20
* Kinetis: update chconf.h and halconf.h for ChibiOS-20
* Kinetis: fix include path for rules.ld
* Nucleo F746: update ld script
* Nucleo F746: fix compile
* Bootloader: fix compilation with ChibiOS-20, cleanup
* Bootloader: add way to pass crosscompiler using CROSS_COMPILE
* Debug build arguments
* Simulator: fix windows compilation
Exclude syscalls_cpp.cpp from compilation
2021-01-19 15:20:35 -05:00
e722f52d39
journey of self discovery
2021-01-14 23:34:10 -05:00
5bfee13c21
fix instant rpm ( #2180 )
...
* consumers
* impl
* instant rpm in idle timing
2021-01-14 20:45:55 -05:00
052e2e558b
Supress annoing unused warnings ( #2216 )
2021-01-11 08:49:20 -05:00
6fef10bd6d
Revert "Revert "rpm rate of change ( #2159 )""
...
This reverts commit d3c49578
2021-01-09 20:06:19 -05:00
d3c49578b7
Revert "rpm rate of change ( #2159 )"
...
This reverts commit eecb7ce9#2207 yes, this makes no sense but just to confirm
2021-01-09 19:45:07 -05:00
5b7a59928a
cherry pick from https://github.com/dron0gus/rusefi/tree/ChibiOS-20
2021-01-09 18:55:58 -05:00
b61ae75fe2
gpio helper ( #2195 )
...
* gpios: isBrainPinValid helper
* LCD HD44780: do not touch pins if DM_NONE or invalid gpio
* Fix isEnabled checks for GPS and Joystick
* LCD HD44780: writePad use this method wider
2021-01-08 20:01:26 -05:00
71fe582ce5
Adc isAdcChannelValid helper ( #2188 )
...
* Guard define argument
* ADC: isAdcChannelValid
Check for both <= EFI_ADC_NONE and >= EFI_ADC_LAST_CHANNEL
Also check for value out of enum range (corrupted settings)
* Fix unit tests
2021-01-05 16:02:20 -05:00
eba6ae2e8f
Flex fuel stubs ( #2187 )
...
* config & ui
* stub sensor
* stub init
* output channel, gauge, SD log
* linky linky
* fix
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-05 07:57:26 -05:00
eecb7ce97f
rpm rate of change ( #2159 )
...
* compute rpm rate of change
* fix units on gauge
* oops
* correct order
* scaling and limits
* correct for engine cycle length
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-03 09:55:44 -05:00
add0dcd390
switch more map to read from sensor model ( #2162 )
...
* hook up map
* check for init
* switch some consumers
* that's the rest of them
* test
* tests
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-02 19:13:10 -05:00
83266c904b
Put map in the sensor model ( #2161 )
...
* hook up map
* check for init
* switch some consumers
* don't do limp for now
* oops
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-30 08:43:49 -05:00
8492f99b91
show when idle is closed loop ( #2160 )
...
* show when idle is closed loop
* semicolon
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-30 08:42:40 -05:00
59d725a113
fix ( #2094 )
2020-12-18 01:30:51 -05:00
5bd1da17c1
Logic analyzer ts report ( #2080 )
...
* Logic analyzer
progress of integration with debug channels
* Update logic_analyzer.cpp
fixed duty report in %
* Update logic_analyzer.cpp
* Update logic_analyzer.cpp
fix for setting one channel to unused, and use the same pin for another channel. this way we clear out hw pointer and we do not have the risk of reporting wrong values.
2020-12-15 14:52:48 -05:00
e0c7d550f4
sd log afr 2 ( #2052 )
2020-12-10 14:05:52 -05:00
ba1ba1452d
second lambda (x-series CAN only, for now) ( #2048 )
...
* add sensor
* second sensor
* switch sensor name
* gobblin up your memory
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-09 20:26:23 -05:00
cf91351c4a
config for second lambda ( #2047 )
...
* config
* size
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-09 14:30:51 -05:00
e38a160644
start peeling out ts commands ( #2045 )
...
* start peeling out commands
* guard
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-09 02:23:02 -05:00
df4f738401
Merge remote-tracking branch 'origin/master' into master
...
# Conflicts:
# firmware/controllers/engine_cycle/high_pressure_fuel_pump.cpp
2020-12-08 21:37:45 -05:00
3f17d84b44
fix warnings found by clang #2014
2020-12-08 13:59:40 -05:00
2e1dad3650
start making TS protocol testable ( #2043 )
...
* start pulling out a class
* pull function out of loop
* there we go
* ok there we go for real
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-08 03:05:43 -05:00
412e2b1d40
Revert "Revert "Split ETB in to interface + implementation headers ( #2040 )""
...
This reverts commit dae0b606
2020-12-07 01:27:27 -05:00
dae0b606cb
Revert "Split ETB in to interface + implementation headers ( #2040 )"
...
This reverts commit 53cbeedb
2020-12-07 01:11:19 -05:00
53cbeedb99
Split ETB in to interface + implementation headers ( #2040 )
...
* split etb interface
* mocks
* fix master while we're at it
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-07 00:29:09 -05:00
4980fc49d9
Fixes after clenup ( #2019 )
...
* We still need consoleEventListener for boards with EFI_CONSOLE_SERIAL_DEVICE
* MC33810: add MC_ prefix for command defines
As CMD_PWM define is now used by console command
2020-12-05 11:54:09 -05:00
9d2471e9ff
add indicator for tps2 fail ( #2016 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-05 00:01:24 -05:00
a1fe39b89d
unit tests in clang #2012
2020-12-04 23:59:21 -05:00
b2493e3181
Merge remote-tracking branch 'origin/master' into master
2020-12-04 21:52:22 -05:00
45205e7da7
Dyno view proposal ( #1999 )
...
* DynoView creation
module implementation and unit_tests
* update acc algo
we only calcualte new acceleration value if speed has changed, not on every callback.
* added acceleration ts_channel
* fixed broken unit tests
* fixed accel sign
* review updates
* Update test_dynoview.cpp
fix unit_tests
* Update engine_controller.cpp
Fix .ram4 unused size
* Update test_dynoview.cpp
2020-12-04 20:28:48 -05:00
b03779e0ac
time to bump TS_OUTPUT_SIZE!
2020-12-02 14:10:02 -05:00
1725efc7e3
introduce vehicle acceleration in TS ( #1997 )
...
* introduce vehicle acceleration in TS
* Update rusefi.input
added gauge as well
2020-12-02 11:12:19 -05:00
ea1c4f9e25
engine sniffer - pins are not displayed #1995
2020-12-01 22:58:27 -05:00
6bf93b653f
Merge remote-tracking branch 'origin/master' into master
2020-11-29 12:51:04 -05:00
a853d99d1a
start/stop debug process
2020-11-25 16:44:08 -05:00
ebb8ede1da
squash warnings ( #1984 )
...
* warnings
* unused
* a few more
* too much
* uint16_t-ify
2020-11-23 09:43:16 -05:00
a54f3e5289
GDI Epic #1448
2020-11-23 01:10:12 -05:00
Andrey
Matthew Kennedy
rusefillc
Andrey G
rusefi
shadowm60