1dfd3359df
remove system lua VM ( #3864 )
...
* well, that was a fun experiment
* don't need that file
* s
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2022-06-29 16:52:17 -04:00
478549ccdf
get rid of setSerialConfigurationOverrides ( #4274 )
...
* get rid of setSerialConfigurationOverrides
* missed a few
* kinetis
2022-06-23 19:42:09 -04:00
83caf1ea1b
Brain pin is enum class ( #4108 )
...
* change most usages to Gpio::
* board configs
* engine configs etc
* isBrainPinValid, smart gpio
* generator
* generator
* generator
* connector yamls
* kinetis enums
* cypress txt
* kinetis config
* frankenso
* config generator
* actually do it for the others
* disable skips for pr ci
* fix tle8888
* misc
* weird cast from int
* needs this operator too
* this can be an unsigned subtract
* happy tests
* s
* kinetis isConfigurationChanged weirdness
* missed J/K
* cypress efifeatures
* build script mistake (!)
* mistake in smart gpio
* debounce
* eg33
* kinetis, so needy
* it's pretty green, we can skip these again
2022-04-28 17:32:39 -04:00
47db520f53
Enable EFI_EMBED_INI_MSD for EG33 board ( #3957 )
...
* Allow per-board EFI_EMBED_INI_MSD enable for F7
* eg33: enable EFI_EMBED_INI_MSD
2022-02-23 12:03:10 -05:00
6e4cb12275
mitigate F7 flash error by making the image smaller ( #3859 )
...
* grumble
* do it for all F7
2022-02-19 15:56:44 -05:00
96c6accf60
now fixing h7
2022-02-09 23:40:00 -05:00
8406fafa9e
Expose console over serial port for H7 proc ( #3578 )
...
This way you can use the console/TunerStudio with the ST-Link
In the process, combine TS_PRIMARY_UART and TS_PRIMARY_SERIAL into TS_PRIMARY_PORT, to make UART vs
SERIAL selection more robus. Ditto for TS_SECONDARY_*. Also change use of TS_NO_PRIMARY to be #if
not #ifdef, so that it can be properly set as a compile flag and not be overwritten by various
header files.
2021-11-20 00:39:08 -05:00
0419e3489a
per-MCU lua size ( #3339 )
...
* per-MCU lua size
* simulator happy
2021-10-09 09:02:30 -04:00
c03c779703
make build happy ( #3067 )
2021-07-26 09:08:05 -04:00
ca625e7935
non blocking flash on f7 dual bank 2MB ( #2749 )
...
* f7 dual bank flash
* only start thread if necessary
2021-05-29 08:05:29 +03:00
c7cc5471ad
Lua on f407, try again ( #2725 )
...
* lua on f4
* move perf trace to efifeatures
* check that it's defined
* cypress and kinetis
* it would help to define the correct thing
* disable buffer if not used
* we can work with 2k
* turn off ramdisk on mre qc
* wow strncpy is useless for truncated strings
* turn off for bootloader
* lto bootloader
* memory
* memory
2021-05-20 23:05:18 +03:00
591b2b3c6c
Revert "lua on f407 ( #2646 )"
...
This reverts commit e35e99f5
2021-05-09 18:25:50 -04:00
e35e99f52d
lua on f407 ( #2646 )
...
* lua on f4
* move perf trace to efifeatures
* check that it's defined
* cypress and kinetis
* it would help to define the correct thing
* disable buffer if not used
* we can work with 2k
* turn off ramdisk on mre qc
* wow strncpy is useless for truncated strings
* turn off for bootloader
* lto bootloader
2021-05-09 16:25:38 -04:00
088ed3c28e
interactive lua ( #2614 )
...
* interactive lua
* unnecessary pop
* print return value
* enable f7 lua
* match f7 chconf
2021-05-03 17:46:12 -04:00
72dac58f9b
fix multi-serial-port insanity ( #2476 )
...
* carve out UART specific
* implement channel
* config cleanup
* use new config
* bootloader
* dead code
* s
* h7 inherits f7
* oops
* ok now it's right
* tests
* cleanup
* call setup
* put that in its own file
* cleanup
* format
* guard
* not needed
* improve guarding
* portable
* allow override of uart mode
* fixes for bootloader
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-28 09:06:36 -04:00
506fb55f5c
Store ini filesystem in compressed block device ( #2420 )
...
* add module
* implement compressed block device
* enable for f7/h7
* script
* stub compressed image
* implement
* call the script
* headers, comments, fix init bug
* set msd options
* update chibios-contrib
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-07 19:25:34 -05:00
8237dd6a41
merge mcuconf for f4/f7 ( #2375 )
...
* merge for f4/f7
* more
* include efifeatures
* s
* no TS serial on f7 for now
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-18 15:04:32 -05:00
c75af2ac75
properly put buffers in no-cache regions ( #2357 )
...
* configure for no cache
* this doesn't need a setting
* now we don't need invalidate
* reorder and comment
* mmc
* sw knock
2021-02-15 17:39:11 -05:00
392bfbc859
cleanup ( #2343 )
2021-02-13 14:23:39 -05:00
f962a7bd64
Gpio cleanup #2 ( #1530 )
...
* pin repository: PIN_USED size in now equal to brain_pin_e enum size
expect special values...
* smart gpios: register gpio chip to given base (no auto-allocation)
* drivers: gpio: core: add gpiochip_unregister()
* drivers: gpio: MC33810 intergation
* smart_gpio.cpp: cleanup ifdef mess, minor cleanups
* gpio: core: additional check for gpio ranges overlaps
* unit test: gpio chip: fixed and extended
2021-01-06 18:29:47 -05:00
983ce38d41
UART DMA for "primary" connector #1528
2020-06-22 01:44:19 -04:00
fdbdf01eae
UART DMA for "primary" connector #1528
2020-06-21 22:26:11 -04:00
c6924d23fa
UART DMA for "primary" connector #1528
2020-06-21 22:14:01 -04:00
af82d63112
refactoring connectivity
2020-06-21 16:37:33 -04:00
7e33ad575d
Revert "Minor fixes ( #1442 )"
...
This reverts commit 2e9cff85
2020-05-16 19:28:49 -04:00
2e9cff8596
Minor fixes ( #1442 )
...
* exti trigger: mark pins used, handle errors
* MC33810 add to smart gpios
2020-05-16 19:15:49 -04:00
ae44c0fce7
Aux serial ( #1422 )
...
* aux serial updates from last PR
* trying to guess
* wow that's old! also not working maybe?
* hiding diag code which was messing with GP2/GP3 i.e. TLE8888_PIN_22 TLE8888_PIN_23
* date
* Mc33 undervolt (#1421 )
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 under voltage check
* mc33 under voltage check
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
* fixed {}
Co-authored-by: rusefi <rusefillc@gmail.com>
Co-authored-by: NOx-z <50815960+NOx-z@users.noreply.github.com>
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
Co-authored-by: kon <dev@triggerdevel>
2020-05-11 12:17:42 -04:00
2951a161bf
it's a mess but helps Proteus F7
...
F4 Proteus will will handle separately
2020-05-06 18:14:23 -04:00
cc1ca11e40
reducing confusion?
2020-05-04 20:52:32 -04:00
5d6ec1d68b
refactoring: using brain_pin like the rest of the code
2020-05-02 23:47:10 -04:00
c1ab5ca585
smart gpio clean-up
2020-04-06 14:13:29 -04:00
580e725d11
Boost pr ( #1114 )
...
* boost control
* cleanup
* Delete rusefi_config.txt
* Add files via upload
* Delete rusefi_config.txt
* Add files via upload
* Update rusefi.input
* Update boost_control.cpp
2020-02-02 03:56:21 -05:00
a222ecdfe1
happy new year unification
2020-01-13 21:57:43 -05:00
82b7190dc0
review feedback
2019-11-03 10:36:35 -05:00
d4b9c7217e
fatalErrorPin setting is not used #926
...
reducing configuration fragility
2019-09-09 21:44:48 -04:00
d2ed57e3c7
enable dtcm ( #856 )
2019-06-23 09:20:17 -04:00
20b6a17695
EFI_CONSOLE_UART_DEVICE, flash->hw_ports, Fix TLE6240 and misc.fixes ( #793 )
...
* rename EFI_CONSOLE_UART_DEVICE -> EFI_CONSOLE_SERIAL_DEVICE
* Impl. EFI_CONSOLE_UART_DEVICE
* Move flash source files to ports/stm32/ & hw_ports.mk
* Fix TLE6240
* Fix EFI_NO_CONFIG_WORKING_COPY
* EFI_PRINT_MESSAGES_TO_TERMINAL
2019-05-05 11:06:27 -04:00
913f887391
fixing F7 build
2019-05-03 22:12:57 -04:00
71976df42f
MC33816 integraion #784
...
bare bones skeleton
2019-05-03 21:13:25 -04:00
c3b575cd09
enabling more stuff with default F7 firmware
2019-05-03 17:36:36 -04:00
7a2856c0fb
reducing risks
2019-04-13 18:31:16 -04:00
b3a161fce6
Cleanup 3 ( #745 )
...
* status leds: pick warning LED pin from configuration
* wave analyzer: do not init if no pin assigned
2019-04-11 23:33:33 +02:00
540e0a2c85
The Big Refactoring of 2019: console vs TS vs CONSOLE_MODE_SWITCH_PIN vs text protocol #725
2019-04-01 11:16:19 -04:00
a79175f6ef
More portability & small fixes ( #719 )
...
* Use hw_stm32.mk
* Fix bootloader
* Use more common hw_ports.mk filename instead of hw_stm32.mk
* More CPU compatibility for Makefile
* TS_UART_MODE & rename TS_SERIAL_UART_DEVICE->TS_SERIAL_DEVICE
* Move lockAnyContext()/unlockAnyContext() to rfiutil.c
* USE_FATFS
* EFI_LCD
* Less compilation errors
* STATUS_LOGGING_BUFFER_SIZE & SETTINGS_LOGGING_BUFFER_SIZE
* EFI_ALTERNATOR_CONTROL, EFI_SERVO, EFI_DISABLE_CONSOLE_ACTIONS
* #ifndef PWM_PHASE_MAX_COUNT & more flexible GPIO inside portname()
* merge
* EFI_ALTERNATOR_CONTROL, EFI_ELECTRONIC_THROTTLE_BODY
2019-03-29 15:29:01 +01:00
96dfebc542
STM32 Nucleo144-F767ZI board: Initial support ( #620 )
...
* More EFI_ #ifdefs for config flexibility
* Even more config flexibility
* New firmware/config/stm32f7ems/* files
* New firmware/config/boards/NUCLEO_F767/* files
* New firmware/hw_layer/stm32f7/* files
* Fix for EFI_USB_SERIAL
* Adding #if defined(STM32F7XX)
* SPI flags changed in F7: SPI_CR1_DFF --> SPI_CR1_CRCL
* I2Cv2 config changed in F7
* More versatile CCM defines
* Makefiles
* Double #ifs cleanup
* docs
2018-11-16 07:40:06 -05:00
0e6cea5cdd
Idle with incremental PID-CIC (EFI_IDLE_INCREMENTAL_PID_CIC) ( #520 )
...
* Idle with incremental PID-CIC (EFI_IDLE_INCREMENTAL_PID_CIC)
* typo
* Remove unused targetIdleRpm from TS config
2017-12-27 17:56:04 -05:00
2bc7dc9eff
#495 todo clean-up
2017-11-19 15:24:36 -05:00
205e9e91d1
f7 dreams
2017-07-22 17:13:26 -04:00
Matthew Kennedy
Andrey G
rusefillc
Scott Smith
rusefi
kon
960
andreika-git
rusEfi
rusefi