FOME-Tech
/
fome-fw
mirror of https://github.com/FOME-Tech/fome-fw.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
13,387 Commits 30 Branches 13 Tags 619 MiB
Commit Graph

184 Commits

Author SHA1 Message Date
Andrey 17c07a0828 s/controlPin1/controlPin/ 2021-06-05 16:19:01 -04:00
rusefillc 5968149584 https://github.com/rusefi/hellen72/issues/25 2021-04-10 23:30:36 -04:00
Andrey G b61ae75fe2 gpio helper (#2195) 
* gpios: isBrainPinValid helper

* LCD HD44780: do not touch pins if DM_NONE or invalid gpio

* Fix isEnabled checks for GPS and Joystick

* LCD HD44780: writePad use this method wider
 2021-01-08 20:01:26 -05:00
rusefi 96cbe35e6f xmas tree 2020-12-26 21:25:19 -05:00
rusefi ba19fae213 xmas tree 2020-12-26 18:59:30 -05:00
rusefi e0319ea941 proteusBoardTest 2020-12-26 13:41:33 -05:00
rusefillc f9de491b67 proteusBoardTest 2020-12-26 10:41:33 -05:00
rusefi c67af9632a PROTEUS_QC_TEST_BOARD 2020-12-26 00:57:23 -05:00
rusefi 4d2265478d GDI Epic #1448 2020-11-22 01:14:34 -05:00
Andrey G 88e830d635 Tle8888 big update 1 (#1892) 
* smart gpio: fix tle8888 direct pin mapping for MRE

* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888

* TLE8888: cleanup

* TLE8888: do not reset driver private data on WD/undervoltage reset

* TLE8888: diagnostic updates

* TLE8888 driver: BIG driver rework

* TLE8888: check SPI answers for abnormal states

Reply with other than requested register can be a sign of:
-Power-On-Reset, then OpStat0 will be replyed
-WatchDog reset, then FWDStat1 will be replyed
-Invalid communication frame, then Diag0 will be replyed

Keep tracking last accessed register and check with the next reply.

* TLE8888: debug clean-up

* TLE8888: implement spi array write

This reduce CS inactive state time between two consequent accesses
from 8.8 uS to 1.4 uS

* TLE8888: fix PP outputs in OD mode

* TLE8888: cleanup register definitions

* TLE8888: run separate driver thread for each chip instance

Calculating poll interval for few chips become more complex, avoid
this running thread for each device.

* TLE8888: fix cypress and kinetic compilation

Both platforms define its own MAX and cause redifination error if
common.h is included in driver.

* MRE: update mapping.yaml and fix direct pin mapping for TLE8888

* TLE8888: diagnnostic: disable switch off in case of overcurrent

For all output, use current limiting instead

* TLE8888: check for overvoltage on OUT8..OUT13

* TLE8888: add TODO note about how to recover from failure condition

Currently TLE8888 automaticly recovers only from overcurrent and
(may be) overtemperature conditions.
Short to bat cause output disable (bit in OECONFIG is reset) and
needs driver/host intervention.

* TLE8888: save few bytes of RAM

* TLE8888: Lada Kalina is test mule for IDLE stepper on TLE8888

Don't forget to enable PP mode for TLE8888 outputs 21..24:
uncomment line 1087 in tle8888.c

* TLE8888: reorder code, cleanup

* TLE8888: mode all debug/statisctic to per-chip struct

* TLE8888: rework poll interval calculation

* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888 #2
 2020-10-23 12:25:30 -04:00
rusefillc a37880eb97 GDI Epic #1448 2020-10-13 00:35:04 -04:00
rusefi b4208f585c QC control mode to crash if RPM = 0 and to mark successful 3 minute test with self-stimulation RPM increase #1871 2020-10-11 19:16:41 -04:00
rusefi 4743718663 QC control mode to crash if RPM = 0 and to mark successful 3 minute test with self-stimulation RPM increase #1871 2020-10-11 19:05:56 -04:00
rusefi e3758d3790 microRusEFI used as Body Control Module BCM BCU 2020-09-07 17:59:59 -04:00
rusefi 66af0565d8 microRusEFI used as Body Control Module BCM BCU 2020-09-06 20:09:26 -04:00
rusefi f55fee38b4 microRusEFI used as Body Control Module BCM BCU 2020-09-06 19:43:54 -04:00
rusefi 581d769227 blinking more LEDs 2020-08-31 17:15:04 -04:00
rusefi d7a63575b2 blinking more LEDs 2020-08-31 14:26:34 -04:00
rusefi 8a1244b7d7 blinking more LEDs 2020-08-31 13:44:58 -04:00
rusefi 1a87b6aa71 blinking more LEDs 2020-08-31 13:27:56 -04:00
rusefi 8d024f4579 BCM 2020-08-29 14:29:34 -04:00
Matthew Kennedy 519427cce2 defaults 2020-08-02 16:21:53 -07:00
rusefi e6a15f1325 MRE 0.5.1 2020-07-04 00:02:44 -04:00
rusefi bb90c1be23 u9 u10 2020-05-23 10:50:32 -04:00
rusefi 8b00823a0f HW test progress 2020-05-21 21:45:01 -04:00
rusefi 871cee3092 test fixture progress 2020-05-21 18:36:32 -04:00
Matthew Kennedy 39c84378eb don't store self stim in config (#1356) 
* kill

* add bench test

* fix
 2020-04-23 22:38:14 -04:00
rusefi 44a5840bcf dreaming about 63 volts 2020-04-15 21:28:44 -04:00
rusefi d5f3147c00 test pins are needed 2020-04-15 16:20:18 -04:00
rusefi d788348d7c mc33 fix 2020-04-14 19:36:25 -04:00
rusefi ae8936b93b MC restart 2020-04-14 19:23:53 -04:00
rusefi f6986e604f MC flag0 2020-04-13 19:01:22 -04:00
Matthew Kennedy 1a59950240 support ETB disable pin (#1273) 
* config & hand gen

* board configs

* add dc motor support

* initialization

* also set duty to zero

* use disable in etb

* fix proteus default

* add TS fields

* I guess we needed 8 bytes

* :D

* comment

Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
 2020-04-10 17:27:13 -04:00
rusEfi c2ab5f4871 more mc33816 2020-02-25 22:38:08 -05:00
rusefi 6b3228b9f1 TEST_33816 2020-02-25 21:35:21 -05:00
rusEfi e9ac797ac9 reviving FRANKENSO_QA_ENGINE 2020-02-18 17:53:56 -05:00
rusEfi ce54ae9497 TLE8888 watchdog #917 
window watchdog progress
 2020-02-10 13:24:09 -05:00
rusefi 63e3e84e08 happy new year 2020-01-08 00:02:40 -05:00
Matthew Kennedy 6703705a33 Pass action_s instead of callback/param (#1084) 
* change action

* consumers

* fix test

* didn't mean to add those

* simplify

* fix simulator

* fix sim for real

* oy

* maybe this time the simulator will actually be fixed, for real

* don't rely on undefined behavior
 2020-01-07 00:41:18 -05:00
rusEfi 59f25e04fd improvements around weird engine types 2019-12-28 23:26:43 -05:00
rusEfi 499a39e88c improvements around weird engine types 2019-12-28 23:22:16 -05:00
rusefi f47a1a16d1 getting rid of boardConfiguration / binary compatible change 2019-12-11 17:48:55 -05:00
rusefi 34f53bd102 making things nicer with dual ETB settings 2019-11-30 17:38:33 -05:00
rusEfi 980a3d7086 all ETBs to run in same HW mode 2019-11-29 16:51:51 -05:00
rusefi 5292024a81 MapAveragingCallback schedules all cylinders at once #974 
saving pennies
 2019-11-24 20:48:25 -05:00
rusefi d8941eec12 moving setDefaultFrankensoConfiguration down is the way of righteousness 2019-11-03 19:36:56 -05:00
andreika-git ef23be6893 Kinetis & TLE8888 compatibility & fixes... (#991) 
* TLE8888: More compatibility & postTunerStudioState

* activeConfiguration & EFI_ACTIVE_CONFIGURATION_IN_FLASH fix

* Kinetis: jump_to_bootloader() impl.

* Kinetis: UART baudrate safety check

* Kinetis: OMG!..
 2019-10-31 16:06:34 -04:00
rusEfi 4c95fbd43d pin conflict in MRE test config 2019-10-10 13:32:07 -04:00
Matthew Kennedy 9b1dc07ae1 Simplify thermistor config (#962) 
* simplify thermistor config

* fix test
 2019-10-02 21:00:10 -04:00
rusEfi 53ae54e8cc ETB target is using integer values #945 
first we will write a unit test
 2019-09-22 00:16:46 -04:00