Commit Graph

102 Commits

Author SHA1 Message Date
rusefi 6453e891e6 "TLE8888 SR Unexpected response" does not work as intended fix #1466 2020-05-22 22:56:19 -04:00
rusefi bf8ceda67d "TLE8888 SR Unexpected response" does not work as intended #1466 2020-05-22 08:23:49 -04:00
rusefi 14b0b5dc4c more info into error message 2020-05-22 01:05:07 -04:00
rusefi f081c8eef4 new LED logic: constant WARNING if VBATT is below 7v 2020-05-13 01:52:27 -04:00
rusefi 5c91d96ce6 new LED logic: constant WARNING if VBATT is below 7v 2020-05-13 01:17:48 -04:00
rusefi adafa0a0d8 I think it's OK to crash very visibly if no proper SPI response 2020-05-13 01:07:11 -04:00
rusefi 5240384624 hiding diag code which was messing with GP2/GP3 i.e. TLE8888_PIN_22 TLE8888_PIN_23 2020-05-11 00:53:50 -04:00
rusefi db8f76bba5 trying to guess 2020-05-09 20:45:20 -04:00
rusefi 7aa195e86e tle8888 restoration 2020-05-09 16:59:54 -04:00
rusefi 137a41282b mre 050 compromise 2020-05-09 09:40:00 -04:00
rusefi bf2d29bff3 Revert "Tle8888 for mre 050 (#1408)"
This reverts commit bd0a84b6
2020-05-08 23:58:34 -04:00
dron0gus bd0a84b62d Tle8888 for mre 050 (#1408)
* tle8888: fix tle8888_chip_init flow

* tle8888: set correct pin modes for mcu gpios in tle8888_chip_init

Direct drive, reset, inj_en and ign_en gpio should be outputs
2020-05-08 19:05:30 -04:00
dron0gus 3fd4d9ffc3 tle8888: on MRE 0.5.0 we can drive ING_EN and INJ_EN from STM (#1407)
Do it!
2020-05-08 17:47:41 -04:00
dron0gus baef1e4a73 Tle8888 stage 1 (#1404)
* TLE8888: implement diagnostic

* TLE8888: add support for PP mode on OUT21..24

* tle8888: use helpers to extract register value from 16bit reply
2020-05-07 09:49:57 -04:00
dron0gus 7007627b70 [SAFE] Debug cleanups (#1403)
* electronic throttle: inprove debug

* idle thread: show debug info for configured idle driver

* gpio-chips: make private functions static
2020-05-06 20:06:50 -04:00
rusefi b607400984 TLE8888 mode flexibility 2020-04-23 16:57:37 -04:00
rusEfi 040e040b4a verboseTLE8888 2020-02-27 02:11:20 -05:00
rusefi 4cf0bfb03b TLE8888 watchdog #917 2020-02-12 19:32:40 -05:00
rusefi c5e69cedc4 #917 progress 2020-02-12 17:37:45 -05:00
dron0gus 65bc3b1744 tle8888: disable diagnostic for outputs (#1144)
DS is not clear, may be tle8888 clears OE bit in case of error on
output.
2020-02-12 08:53:35 -05:00
rusEfi ea4714e0c2 tle8888 dump at init 2020-02-12 08:34:26 -05:00
rusEfi 37896cb927 have nothing else to do :( 2020-02-12 08:24:24 -05:00
rusEfi 61da49b3c5 tle8888 output fix 2020-02-12 08:15:55 -05:00
rusEfi 41e10c177c FATAL error running MRE blinking test #1137
typo
2020-02-11 17:52:01 -05:00
rusEfi 9d5e4684b6 Merge branch 'master' of https://github.com/rusefi/rusefi 2020-02-11 17:49:49 -05:00
rusEfi 21853eb500 FATAL error running MRE blinking test #1137
still not the fix?
2020-02-11 17:49:39 -05:00
dron0gus 919034ca3e Tle8888 wd (#1143)
* tle8888: watchdog: debug over TS: remove tailing register address

* tle8888: ann console command to dump all regs
2020-02-11 17:49:14 -05:00
dron0gus ee56957205 tle8888: watchdog: debug using TS (#1142) 2020-02-11 16:56:52 -05:00
dron0gus 9fe8fe86a0 tle8888: watchdog: use FWDRespSyncCmd for last response (#1140) 2020-02-11 15:49:17 -05:00
dron0gus 59bb70f638 tle8888: watchdog: do not overwrite defaults, response table fix (#1139) 2020-02-11 15:36:53 -05:00
rusEfi 0c2d00b455 TLE8888 watchdog #917
still no luck. responses 0x85c and 0xa5c
2020-02-11 00:54:15 -05:00
rusEfi 41f274b73c WdDiag 2020-02-10 21:28:55 -05:00
rusEfi edc7ad69ae TLE8888 watchdog #917
time to start working?!
2020-02-10 18:32:32 -05:00
rusEfi 948cc7743e TLE8888 watchdog #917
maybe better start-up sequence
2020-02-10 17:08:37 -05:00
rusEfi fdb9e97fd3 TLE8888 watchdog #917 2020-02-10 14:37:52 -05:00
rusEfi ce54ae9497 TLE8888 watchdog #917
window watchdog progress
2020-02-10 13:24:09 -05:00
rusefi 223fe8ab70 TLE8888 watchdog #917
first steps
2020-02-10 11:11:00 -05:00
rusEfi cfd7397e46 FATAL error running MRE blinking test fix #1137 2020-02-09 21:16:31 -05:00
rusEfi 3c874398ff tle8888 start-up clean-up 2020-02-09 20:41:25 -05:00
dron0gus 1b19aa1c57 hw: gpio: use unsigned int as pin number inside gpiochip drives (#1097)
Not brain_pin_e. Drivers like to see pin number within current
chip.
2020-01-11 10:29:41 -05:00
rusefi 63e3e84e08 happy new year 2020-01-08 00:02:40 -05:00
Matthew Kennedy df57b24e3f Shrink output channels, now with passing CI (#1077)
* reorder fields

* temporary tle8888 fix

* comment, simplify

* hand tweak generated

* oops, those are reciprocal

* fix engineLoadAccelExtra

* aggressive priority order

* fix output size

* comments

* reorder fields, no sizes yet

* should've been signed

* simplify constructor mess, hook up scaling

* notes

* typo

* if -> switch

* rev signature

* correct map offset

* handle unsigned properly

* RPM is unsigned

* vss isn't scaled

* extract magic

* required generated for build

* de-scale rpm

* field type cases
2019-12-22 08:12:45 -05:00
rusefi 9ffda831a7 Revert "DRAFT Shrink output channels, again (#1074)"
This reverts commit ad7a383d
2019-12-21 15:02:49 -05:00
Matthew Kennedy ad7a383d74 DRAFT Shrink output channels, again (#1074)
* reorder fields

* temporary tle8888 fix

* comment, simplify

* hand tweak generated

* oops, those are reciprocal

* fix engineLoadAccelExtra

* aggressive priority order

* fix output size

* comments

* reorder fields, no sizes yet

* should've been signed

* simplify constructor mess, hook up scaling

* notes

* typo

* if -> switch
2019-12-21 08:55:19 -05:00
rusefi 7dc6057ac7 Revert "Shrink output channels, use scaling (#1069)"
This reverts commit 1e0f1a26
2019-12-19 22:35:06 -05:00
Matthew Kennedy 1e0f1a2628 Shrink output channels, use scaling (#1069)
* reorder fields

* temporary tle8888 fix

* comment, simplify

* hand tweak generated

* oops, those are reciprocal

* fix engineLoadAccelExtra

* aggressive priority order
2019-12-19 20:37:42 -05:00
rusefi 19bdb9a35f docs & code formatting 2019-11-19 18:17:03 -05:00
andreika-git ef23be6893 Kinetis & TLE8888 compatibility & fixes... (#991)
* TLE8888: More compatibility & postTunerStudioState

* activeConfiguration & EFI_ACTIVE_CONFIGURATION_IN_FLASH fix

* Kinetis: jump_to_bootloader() impl.

* Kinetis: UART baudrate safety check

* Kinetis: OMG!..
2019-10-31 16:06:34 -04:00
Matthew Kennedy 821ca6156f move tsOutputChannels to header (#970) 2019-10-08 21:02:51 -04:00
rusefi 12d9bc50b3 tle8888 reinit command 2019-09-05 10:30:27 -04:00