Andrey G
cd548b4db2
hip9011 compilation fix, cosmetic clean-ups ( #2414 )
...
* Board subaru eg33: has HIP9011 knock sensor
* hip9011: lastExecutionCount does not exist any more
* hip9011: extranc commands to header, use logic math for bitfields
2021-02-28 15:42:57 -05:00
Matthew Kennedy
f347b92f45
allow disabling fast ADC ( #2406 )
...
* mostly guard against no fast adc
* disable on h7
* guard more
* guard adc init
* you can't do that in c++
* we need that
* s
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-28 07:30:19 -05:00
Matthew Kennedy
dcd72a87f9
H7 flash ( #2408 )
...
* enable
* defines and mpu util
* implement flash for h7
* format
2021-02-26 17:38:17 -05:00
Matthew Kennedy
f18ef02fa6
maybe hook up sdmmc ( #2398 )
...
* maybe hook up sdmmc
* the complier didn't like that very much
* mcuconf
* guard properly
* fix
* duh
* omg that's an extra close paren
* explicitly set which device fatfs should use
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-25 01:37:44 -05:00
Matthew Kennedy
6e41aeb165
deduplication in halconf ( #2377 )
...
* rusefi_halconf
* h7 gpt
* don't redefine that
* maybe this was necessary
* format
* no usb in cypress
* flags for bl
* cypress
* maybe bootloader
* no smart build for cypress/kinetis
* no smart build
* no really, disable smart build
* don't need to clean that env var
* cypress
* format
2021-02-24 14:08:03 -05:00
Matthew Kennedy
76c423ccca
enable H7 spi ( #2391 )
...
* enable features
* move MMC SPI config to port
* correct word length
* related cleanup
* doesn't need nocache
* include
* enable that
2021-02-24 08:14:21 -05:00
David Holdeman
a12cc8e091
Fix mre pinout ( #2384 )
...
* move pins over
* rearrange
2021-02-22 16:23:08 -05:00
rusefillc
ee13021dee
hellen
2021-02-20 00:45:48 -05:00
rusefillc
aa3157fbb0
a lot of Hellen
2021-02-19 22:23:58 -05:00
rusefillc
571f18e2c2
hellen64
2021-02-19 17:40:32 -05:00
rusefillc
8c43a15b8a
Merge remote-tracking branch 'origin/master' into master
2021-02-19 17:00:44 -05:00
rusefillc
f9d75db87b
let's start somewhere!
2021-02-19 17:00:30 -05:00
David Holdeman
3c0d8a3206
Add missing MRE pins, fix bug ( #2380 )
...
* get type for table with multi-id pin
* add missing pins
* add missing type styles
* missing colon
* fix type
* add missing color
* use whole type
2021-02-19 16:59:57 -05:00
GitHub build-firmware Action
260aa6e333
Auto-generated configs and docs
2021-02-18 23:20:11 +00:00
Andrey G
4b5da445f1
Subaru build ( #2376 )
...
* Subaru EG33: gen_config.sh update
* gen_config and gen_enum_to_string for subaru_eg33 board too
* Subaru eg33: add to buildables
* Subaru: fix build
* Subaru eg33: fix build and cleanup
* subaru eg33: add compile script
* github: subaru_eg33: call special gen_config.sh
2021-02-18 18:18:13 -05:00
rusefillc
6dc3aead01
would this give me h72 SD?
2021-02-18 17:31:03 -05:00
rusefillc
369d68d464
would this give me h72 SD?
2021-02-18 17:04:51 -05:00
rusefillc
14e8ebd034
would this give me h72 SD?
2021-02-18 16:16:45 -05:00
Matthew Kennedy
8237dd6a41
merge mcuconf for f4/f7 ( #2375 )
...
* merge for f4/f7
* more
* include efifeatures
* s
* no TS serial on f7 for now
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-18 15:04:32 -05:00
rusefillc
32cdd1dcea
h72
2021-02-17 19:25:49 -05:00
andreika-git
9b5a266d59
Hellen72 more defaults ( #2369 )
...
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2021-02-17 11:20:03 -05:00
rusefi
483bee389b
https://github.com/andreika-git/hellen-one/issues/3
2021-02-17 10:18:46 -05:00
rusefi
79deda97ac
https://github.com/andreika-git/hellen-one/issues/3
2021-02-17 10:16:21 -05:00
rusefi
07bafa81fb
h72 might require this
2021-02-17 09:50:28 -05:00
rusefi
cffd7964ef
h72 wants control
2021-02-16 16:08:45 -05:00
rusefillc
c2147799bc
USB mass storage tweaking #2352
2021-02-16 14:59:54 -05:00
Matthew Kennedy
c75af2ac75
properly put buffers in no-cache regions ( #2357 )
...
* configure for no cache
* this doesn't need a setting
* now we don't need invalidate
* reorder and comment
* mmc
* sw knock
2021-02-15 17:39:11 -05:00
David Holdeman
70341538f0
MRE connectors ( #2354 )
...
* Add MRE connector images
* fix name
* missing colon
2021-02-14 20:56:25 -05:00
Matthew Kennedy
a576c2e109
USB mass storage tweaking ( #2352 )
...
* disable TS in case of USB MSD
* housekeeping while we're here
* enable on MRE
* changelog
2021-02-14 15:03:07 -05:00
Matthew Kennedy
5391b4260f
automatic switch between internal and MSD SD card ( #2349 )
...
* auto enable usb msd
* guard and turn on for proteus
2021-02-14 08:10:39 -05:00
Matthew Kennedy
392bfbc859
cleanup ( #2343 )
2021-02-13 14:23:39 -05:00
rusefillc
b79fb2ac5f
M62T vanos support #2243
2021-02-10 21:44:21 -05:00
Matthew Kennedy
adff68748c
move chconf/mcuconf/halconf in to hw_ports ( #2321 )
...
* move f4 config files
* don't need this
* f7
* f7
* h7
* this was duplicated
* turn off smart build
* loader too
* update prometheus paths
* bootloader should include confdir
* fix the flash size while we're at it
* move chconf_common
* use wait
* normalize board.mk
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-10 19:38:24 -05:00
rusefi
6c9416daa9
aux pid is now VVT
2021-02-10 12:41:38 -05:00
Matthew Kennedy
a3d0b61cf1
get mcu temperature within port ( #2326 )
...
* remove EFI_ADC_TEMP_SENSOR
* implement
* comment
* s
* switch adc_inputs over
* header
* s
* I think aligned-on-stack should work ok
* num channels
* cache safety
* move adc init too
* don't compile that file for the h7
* cypress & kinetis
* ports
* guard against bootloader
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-09 22:04:36 -05:00
rusefillc
8fa1a6530b
M62T vanos support #2243
2021-02-08 21:50:31 -05:00
rusefi
2ccb75a064
refactoring: naming consistency
2021-02-08 18:20:53 -05:00
rusefi
4b8a92ccc9
M62T vanos support #2243
2021-02-08 18:08:26 -05:00
Matthew Kennedy
ff8f24d30c
stm32h7 usb ( #2319 )
...
* enable
* enable
* serial number
* usb defines
* buffer size
* more stuff we can enable
2021-02-08 16:24:49 -06:00
Matthew Kennedy
8cc6ef83f9
h7 flash, guard against no CAN ( #2317 )
...
* h7 flash
* guard some other stuff
* I guess it just builds now?
* maybe ci too
2021-02-08 16:24:38 -05:00
Matthew Kennedy
ad6fc5415d
move board.h for f7/h7 ( #2316 )
...
* f7 board.h
* h7
2021-02-08 15:46:48 -05:00
Matthew Kennedy
3412d8fe64
move f4 board.h ( #2313 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-08 15:29:07 -05:00
Matthew Kennedy
37fa81b5d0
include board.c from hw_ports.mk ( #2311 )
...
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead
* move board.c
* set explicit cpu type for simulator
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-08 07:52:31 -06:00
Matthew Kennedy
c0757a7d13
simplify MCU selection ( #2308 )
...
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead
2021-02-08 02:11:44 -05:00
Matthew Kennedy
58c18f8df9
goodbye f746 ( #2309 )
2021-02-07 07:52:57 -06:00
David Holdeman
3ae34637b8
add info to 4S ( #2300 )
2021-02-06 16:06:25 -06:00
Andrey G
0f47cff952
Add subaru eg33 ( #2294 )
...
* engine: Subaru SVX EG33 engine configuration
Not tested yet. Just basic settings and placeholder
* board: add Dron_Gus's Subaru EG33 p'n'p board
* board: subaru eg33: linker script: stack, bss and heap to ram0
* board: subaru eg33: add mapping.yaml
* board: subaru eg33: scripts for autogenerated
* board: subaru eg33: fix DMA conflict (ADC1 vs SPI5)
* board: subaru eg33: enable ADC3
* board: subaru eg33: Autogenerated
* board: subaru eg33: disable fsio control of Main Relay
Default MAIN_RELAY_LOGIC cause error during parsing
* board: subaru eg33: configuration hack to fix usbconsole.c
* gen_config: generate config for Subaru SVX board too
2021-02-06 12:50:34 -06:00
rusefillc
ecf4227ccd
H7 compilation #2284
2021-02-06 00:28:38 -05:00
rusefillc
660b8e319d
H7 compilation #2284
2021-02-06 00:07:05 -05:00
rusefillc
096c67b4de
H7 compilation #2284
2021-02-05 23:57:28 -05:00
rusefillc
1a7c7ff983
reducing code duplication
2021-02-05 23:56:22 -05:00
rusefillc
7fe83b4da1
reducing code duplication
2021-02-05 23:45:47 -05:00
rusefillc
7962f8e501
reducing code duplication
2021-02-05 23:41:26 -05:00
rusefillc
3be5714e94
H7 compilation #2284
2021-02-05 23:37:18 -05:00
rusefillc
a05ba83fc0
H7 compilation #2284
2021-02-05 22:46:04 -05:00
rusefillc
bb7af93e66
let's build for h7
2021-02-05 22:29:23 -05:00
rusefillc
59efbf8833
code reuse good, code duplication bad
2021-02-05 22:19:24 -05:00
rusefillc
c549a13c1f
let's build for h7
2021-02-05 22:10:59 -05:00
rusefillc
1c51e06e35
let's build for h7
2021-02-05 20:58:34 -05:00
rusefillc
4009e87b18
let's build for h7
2021-02-05 20:25:01 -05:00
rusefillc
146738f776
let's build for h7
2021-02-05 20:18:47 -05:00
rusefillc
48adc90975
let's build for h7
2021-02-05 20:16:10 -05:00
rusefillc
79b035a7b0
that's a bit useless?
2021-02-05 20:14:52 -05:00
rusefillc
2b2c020582
hellen72b
2021-02-05 19:20:04 -05:00
Matthew Kennedy
7fec313f50
Proteus analog input ci ( #2271 )
...
* test vbatt
* test proteus vbatt
* tolerance
* these don't work on proteus
* new engine type
* test analog input
* more test points, less tolerance
* console build needs this file generated
* only include for hw ci builds
* wiring info
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-03 13:34:48 -06:00
Matthew Kennedy
7af3931032
hardware ci tweaks ( #2266 )
...
* frankenso config
* Revert "frankenso config"
This reverts commit 5bb2375ba2d33ae487273eaa5b7a4f12e8a9cecc.
* add hardware CI flag for proteus
* rename ci job
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-02 08:14:24 -06:00
David Holdeman
2a6efec24f
Pinouts Improvements ( #2263 )
...
* redo pinout generation in ci script
* missing operand
* fix some errors
* copy yaml
* more bugs
* fix bug
* wait for image to load
* set background color for hover in dark theme
* add feature: click on rows to select pin
* change cursor to pointer
* undo accidental submodule bump
* oops
2021-02-01 17:31:36 -06:00
Matthew Kennedy
e22a9e9d02
-g3 to -g ( #2256 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-31 14:13:55 -05:00
rusefillc
4bdc41d723
typo
2021-01-31 12:27:26 -05:00
David Holdeman
46ac46f171
Connector images, hellen128 mapping ( #2255 )
...
* add some connector images
* proteus black23
* add script
* add black23 to script
* remove redirect to send to stdout
* copy img
* black35
* rotate white35
* white35
* forgot last row of black35
* rename
* create in subdir
* hellen72 main
* connectors subdir stupid
* undo submodule update
* remove hash signs
* add hellen128 image
* cd to script dir first
* hellen128 rough draft
* gen hellen128
* fix paths
2021-01-31 08:11:18 -05:00
rusefi
b4ab11ddab
Miata default config: "22 - AN temp 4" is PA3 not PA6?
2021-01-28 23:30:46 -05:00
rusefi
fb592d3a0f
removing weird stuff
2021-01-28 23:16:43 -05:00
rusefillc
f8f90cbffb
No hablo inglés
2021-01-28 20:43:23 -05:00
rusefillc
9cec794f27
IGNORE_FLASH_CONFIGURATION
2021-01-28 18:03:45 -05:00
rusefillc
3c62dfc39d
mre_f4_recovery build
2021-01-28 17:46:49 -05:00
rusefillc
d5f914f96a
Hellen mapping #2235
...
fixing CLT mis-mapping
2021-01-27 22:58:06 -05:00
rusefillc
ab12a4d187
Revert "FRANKENSO to use HAL_VSS_USE_PAL"
...
This reverts commit 7c66b535
2021-01-24 00:05:17 -05:00
rusefillc
7c66b535e5
FRANKENSO to use HAL_VSS_USE_PAL
2021-01-23 22:57:13 -05:00
rusefillc
86cb26f9b1
https://github.com/rusefi/rusefi/pull/2236 by AlexHLinS
2021-01-23 20:08:57 -05:00
rusefillc
0ae7eed5be
knock-knock
2021-01-23 00:00:34 -05:00
rusefillc
fb03e1ff0e
Merge remote-tracking branch 'origin/master' into master
2021-01-22 22:58:23 -05:00
David Holdeman
8e2f6e57d8
Hellen mapping ( #2235 )
...
* convert hellen mapping.yaml
* remove mapping.yaml as it is not used
2021-01-22 16:51:02 -05:00
rusefillc
97ab1f8f24
Merge remote-tracking branch 'origin/master' into master
2021-01-22 12:03:30 -05:00
David Holdeman
928b8ce70a
New board pin-mapping system ( #2231 )
...
* convert mre mapping
* convert mre mapping
* funny stuff for GPIOA_5
* move class next to id
* rough draft
* update scripts
* fix some errors
* fix some errors
* try
* check against null
* try amp
* try
* try
* fix some errors
* update scripts
* fix maybe
* fix maybe 2
* fix maybe
* fix maybe
* fix
* try
* fix
* use .equals
* use StringBuilder
* use instanceof
* use .max
* remove getMaxValue
* Suppress Warning
* major optimization
* fix maybe
* off-by-one error
* move yaml file loop
* add j2 connector
* add pads yaml
* check for null or empty
* add AV pins to pads
* forgot class
* move registerpins out of loop
* fix typo
* rebase
* check if string
* convert frankenso
* convert frankenso
* tyop
* missing class
* copy mre to skel
* remove prometheus yaml
* remove kinetis yaml
* build configDefinition
* replace var with string
* slight refactor
2021-01-22 12:03:14 -05:00
rusefillc
4fb0f6e5c3
Hellen72
2021-01-22 02:09:28 -05:00
rusefillc
7f893c6159
Hellen72
2021-01-22 02:02:16 -05:00
andreika-git
5fbb1c6b5d
hellen72 trigger PAL mode ( #2233 )
...
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2021-01-21 10:22:29 -05:00
Andrey G
27905c6817
Chibi os 20 ( #2212 )
...
* Update ChibiOS
* Fix Makefiles includes paths
* halconf.h: remove flash hack
* mcuconf: fix EXTI ptiorityes
* Digital Input: ICU: use designated initializers, initialize 'arr'
* ChibiOS: lis302dl fix
* ADC: update to new API
* UARTConfig: timeout_cb field, formating
* ChibiOS: remove _exit, _kill, _getpid
* Fix lis302dl
* Bump config versions
* chconfig_common: cosmetic changes
* stm32f4ems: commulative config update
* Update Simulator
* ALLCSRC already contain all needed ChibiOS files.
Same for ALLINC and ALLCPPSRC
* ChibiOS fix for Simulator
* ChibiOS: port lock/unlock hook and MMC over SPI timeout
* STM32F7: update configs
* STM32F7: update linker file
* Cypress: port ADC lld to ChibiOS-20
* Cypress: port SPI lld to ChibiOS-20
* Cypress: port CAN lld to ChibiOS-20
* Cypress: fix include path for rules.ld
* Cypress: update chconf.h and halconf.h for ChibiOS-20
* Kinetis: update ADC lld to ChibiOS-20
* Kinetis: update SPI lld to ChibiOS-20
* Kinetis: update UART lld driver for ChibiOS-20
* Kinetis: update chconf.h and halconf.h for ChibiOS-20
* Kinetis: fix include path for rules.ld
* Nucleo F746: update ld script
* Nucleo F746: fix compile
* Bootloader: fix compilation with ChibiOS-20, cleanup
* Bootloader: add way to pass crosscompiler using CROSS_COMPILE
* Debug build arguments
* Simulator: fix windows compilation
Exclude syscalls_cpp.cpp from compilation
2021-01-19 15:20:35 -05:00
Andrey G
d134fabc51
Simplify Makefile, unify board.mk files ( #2229 )
...
* Proper way to add lis302 driver
* Proper way to add license directory to includes
* Makefile: simplify
All ChibiOS stuff is accumulated in ALLCSRC, ALLINC and so on.
* board.mk: append sources and includes to ALLSRC, ALLCPPSRC, ALLINC
* Cypress: fix CANv2 includence into build
2021-01-17 09:32:06 -05:00
Andrey G
052e2e558b
Supress annoing unused warnings ( #2216 )
2021-01-11 08:49:20 -05:00
rusefi
dcc1d7ad01
nb2 and proteus usability
2021-01-11 01:17:03 -05:00
rusefi
fcc49918f9
vvt knock
2021-01-10 18:57:27 -05:00
Andrey G
75098a0d4b
Lcd fix (I hope) ( #2211 )
...
* LCD: check if settings are valid on each access
* Lada Kalina: remove duplicate code
All LCD pins are set to GPIO_UNASSIGNED in disableLCD()
* Remove duplicate code
* We still need to know when invalid gpio is used...
This reverts commit 9c12c4dd44
.
2021-01-09 17:16:10 -05:00
rusefillc
554dec7a05
Hellen
2021-01-09 11:24:13 -05:00
Andrey G
b61ae75fe2
gpio helper ( #2195 )
...
* gpios: isBrainPinValid helper
* LCD HD44780: do not touch pins if DM_NONE or invalid gpio
* Fix isEnabled checks for GPS and Joystick
* LCD HD44780: writePad use this method wider
2021-01-08 20:01:26 -05:00
andreika-git
3dac7599c4
Hellen72 config ( #2200 )
...
* Hellen72 config
* Hellen72 files
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2021-01-08 12:50:13 -05:00
Matthew Kennedy
86d3746453
Idle timing uses phase logic, remove falloff ( #2169 )
...
* use phase computation
* move & simplify implementation
* test
* bad merge
* initialize
* wonderful changelog
* now unused parameter
* put back deadzone
* ui
* test deadzone
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-07 08:06:36 -05:00
rusefillc
5a75c69b8e
knock v12
2021-01-06 19:42:07 -05:00
Andrey G
f962a7bd64
Gpio cleanup #2 ( #1530 )
...
* pin repository: PIN_USED size in now equal to brain_pin_e enum size
expect special values...
* smart gpios: register gpio chip to given base (no auto-allocation)
* drivers: gpio: core: add gpiochip_unregister()
* drivers: gpio: MC33810 intergation
* smart_gpio.cpp: cleanup ifdef mess, minor cleanups
* gpio: core: additional check for gpio ranges overlaps
* unit test: gpio chip: fixed and extended
2021-01-06 18:29:47 -05:00
rusefillc
8396f36a14
knock knock v12
2021-01-06 12:48:32 -05:00
rusefi
35482fd21e
progress
2021-01-03 17:58:00 -05:00
rusefi
a8bba64220
GPIOG_1 is not a proteus control pin, assuming a typo
2021-01-01 18:20:49 -05:00
rusefi
c29a0d9b06
docs
2021-01-01 18:19:52 -05:00
rusefi
e530ded915
F7 HW CI
2020-12-28 23:26:51 -05:00
rusefi
154912509b
fixing QC config
2020-12-28 19:19:29 -05:00
rusefillc
b286ec8a34
fine-grained check modes
2020-12-27 17:41:28 -05:00
rusefi
96cbe35e6f
xmas tree
2020-12-26 21:25:19 -05:00
rusefi
ba19fae213
xmas tree
2020-12-26 18:59:30 -05:00
rusefi
3d3b5706d3
HW_CHECK_SPARK_FSIO
2020-12-26 16:16:40 -05:00
rusefi
e0319ea941
proteusBoardTest
2020-12-26 13:41:33 -05:00
rusefillc
8bcaea7868
https://github.com/rusefi/rusefi/wiki/HOWTO-Miata-NB2-on-Proteus
2020-12-26 11:42:09 -05:00
rusefillc
80854bf5ce
proteusBoardTest
2020-12-26 10:50:18 -05:00
rusefillc
027c5a3580
proteusBoardTest
2020-12-26 10:46:45 -05:00
rusefillc
f9de491b67
proteusBoardTest
2020-12-26 10:41:33 -05:00
rusefi
c67af9632a
PROTEUS_QC_TEST_BOARD
2020-12-26 00:57:23 -05:00
Matthew Kennedy
fad3b07b8b
Purge e34 config ( #2127 )
...
* remove
* enums
* s
* func test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-24 07:31:25 -05:00
Matthew Kennedy
7617b115de
Partition configs by board type ( #2106 )
...
* remove old flag
* flags
* reorder switch
* oops
2020-12-22 21:54:40 -05:00
rusefi
4c347026ff
Proteus is compiled without VSS feature #2122
2020-12-22 21:28:51 -05:00
rusefi
6ddfff8fd9
Proteus is compiled without VSS feature #2122
2020-12-22 20:50:01 -05:00
Matthew Kennedy
4a95652f88
Purge fiesta config ( #2117 )
...
* config
* this had a feature flag?
* enums
* goodbye, fiesta
2020-12-22 17:22:05 -05:00
rusefillc
632afe3432
fixing master PROTEUS_DEFAULTS
2020-12-22 17:13:05 -05:00
Matthew Kennedy
85f0621738
Purge rover v8 config ( #2116 )
...
* bye
* goodbye, rover v8
* that snuck in
* use a different config for that test
2020-12-22 10:05:54 -05:00
rusefillc
1d434336f8
VR_HW_CHECK_MODE
2020-12-21 13:33:09 -05:00
rusefi
99a349e4c6
VR_HW_CHECK_MODE
2020-12-21 12:30:15 -05:00
rusefillc
4220b9fcbd
something ? HIP / SPI pin conflict does not fail gracefully #2108
...
maybe this is just testing framework bug?
2020-12-20 17:17:03 -05:00
rusefillc
34fc9b1fb6
something ? HIP / SPI pin conflict does not fail gracefully #2108
2020-12-20 12:51:20 -05:00
rusefi
9194323b5d
proteus_f4_hardware_QC_special_build
2020-12-20 11:17:38 -05:00
rusefillc
1be84c072e
proteus_f4_hardware_QC_special_build
2020-12-20 09:14:14 -05:00
rusefillc
bf0dfcf659
proteus_f4_hardware_QC_special_build
2020-12-20 09:11:36 -05:00
rusefi
c6cdcb27de
something ? HIP / SPI pin conflict does not fail gracefully #2108
2020-12-19 17:06:42 -05:00
rusefillc
009f48b457
something ? HIP / SPI pin conflict does not fail gracefully #2108
2020-12-19 16:07:21 -05:00
rusefillc
1e5be46b4c
something ? HIP / SPI pin conflict does not fail gracefully #2108
2020-12-19 15:18:23 -05:00
CrazyStriker
b905a4aa5b
Nb proteus config ( #2104 )
...
* Added proteus config and started working on it
* Update engine config
* corrected board config
* Completed pin attribution in proteus hardcoded nb2 miata
* Removed problematic call
* Corrected the blocking value
* Removed blocking equal sign
* Reworked indentation
2020-12-18 15:53:57 -05:00
rusefillc
d38195b206
NB2 MRE closer to reality
2020-12-17 19:03:38 -05:00
Matthew Kennedy
34edf34bf4
only build in config for the correct board ( #2088 )
...
* only build in config for the correct board
* undo
* undo
* undo
* only touch proteus config
* include configs in tests
2020-12-17 17:12:24 -05:00
rusefillc
88bb2f4569
trigger and start button pins not displayed by "pins" command fix #2084
2020-12-16 22:24:19 -05:00
rusefillc
727a775049
hello new wiki
2020-12-16 19:58:15 -05:00
Matthew Kennedy
91d1acb50e
prototype wideband firmware update ( #2074 )
...
* add submodule for firmware
* ts
* add updater
* add bench_test
* don't collide idx
* feature flag
* send acks
* fix timeout logic
* ui
* do it on the bench thread
* guard
* guard
* only do twice
* guard
* bump version
* update
* file name
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-16 08:28:53 -05:00
rusefillc
7d104bff8d
pnp progress
2020-12-15 00:09:35 -05:00
rusefillc
4c2ea35269
TT_SUBARU_7_WITHOUT_6
2020-12-13 17:46:48 -05:00
rusefi
3684b739d3
subi
2020-12-13 16:38:09 -05:00
rusefi
e906552e03
subi drama
2020-12-13 15:44:14 -05:00
rusefi
233381cb2e
this car has high-side main relay WOW
2020-12-13 14:49:14 -05:00
rusefi
afe387c7be
subi
2020-12-13 11:39:10 -05:00
rusefillc
15be4c0e50
https://rusefi.com/forum/viewtopic.php?p=38877#p38877
2020-12-12 20:07:53 -05:00
rusefillc
3be2c27485
Passat B6 canned config: GDI injector deadtime to like flat 0.2ms #2049
2020-12-11 09:07:23 -05:00
Matthew Kennedy
6f491cf5c4
switch stm32 scheduling to use PWM driver ( #1983 )
...
* move to folder
* extract hardware part of microsecond_timer
* dead ST forum link
* de-volatile
* simulator build
* guard
* switch stm32 to pwm timer
* comments
* f7 mcuconf
* simulator
* guard
* warning
* header, cleanup
* constant
* less magic
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-11 00:44:40 -05:00
rusefillc
f868d05dec
MRE_SUBARU_EJ18
2020-12-06 14:16:40 -05:00
shadowm60
45205e7da7
Dyno view proposal ( #1999 )
...
* DynoView creation
module implementation and unit_tests
* update acc algo
we only calcualte new acceleration value if speed has changed, not on every callback.
* added acceleration ts_channel
* fixed broken unit tests
* fixed accel sign
* review updates
* Update test_dynoview.cpp
fix unit_tests
* Update engine_controller.cpp
Fix .ram4 unused size
* Update test_dynoview.cpp
2020-12-04 20:28:48 -05:00
rusefillc
ba0503177c
more dead code
2020-12-03 10:49:20 -05:00
rusefi
1dba003c5c
isSdCardEnabled is set to 'true' a few lines below
2020-12-02 00:09:08 -05:00
rusefi
53a9efd0f0
PnP miata
2020-11-30 00:12:06 -05:00
rusefi
ab0fe12d65
PnP miata
2020-11-30 00:10:29 -05:00
rusefi
24bff5e5e1
PnP miata
2020-11-30 00:00:36 -05:00
rusefillc
0884bc36f6
94
2020-11-29 18:09:11 -05:00
rusefillc
58e174b3fb
94
2020-11-29 12:07:56 -05:00
rusefillc
d199302b83
miata 94
2020-11-28 22:49:28 -05:00
rusefi
08c7849b29
it's weird
2020-11-27 16:41:11 -05:00
rusefi
93160c6abb
LM_ALPHA_N_2 rename
2020-11-27 15:44:31 -05:00
rusefillc
42c56a47da
dead engine config
...
one step back
2020-11-26 21:21:25 -05:00
rusefillc
0f39f37bba
dead engine config
2020-11-26 21:07:34 -05:00
rusefillc
96ca95bd1e
dead engine config
2020-11-26 20:26:12 -05:00
rusefillc
f5f97d60df
Starter is engaged on start-up in pull-up configuration #1969
2020-11-26 16:58:02 -05:00
rusefillc
0bd148d97d
Starter is engaged on start-up in pull-up configuration #1969
2020-11-26 16:56:18 -05:00
rusefillc
f63e3c68fd
Starter is engaged on start-up in pull-up configuration #1969
2020-11-26 16:20:13 -05:00
Matthew Kennedy
dfa38e6829
default to off ( #1989 )
2020-11-25 22:44:08 -05:00
rusefi
e2ac877926
GDB helper
2020-11-25 13:53:29 -05:00
rusefi
4d2265478d
GDI Epic #1448
2020-11-22 01:14:34 -05:00
Matthew Kennedy
2792828dce
Remove lockAnyContext, replace with CriticalSectionLocker ( #1938 )
...
* switch to CriticalSectionLocker
* that's just about all
* clean up last usage
* include hpp for sim
* need the cpp wrappers in the makefile too
* include dir
* include
2020-11-19 06:56:02 -05:00
rusefi
e7dfffe71d
toyota89281_33010_pedal_position_sensor
2020-11-16 23:38:23 -05:00
rusefillc
851478f846
DC not ETB refactoring
2020-11-16 20:05:35 -05:00
rusefi
5b45f25f09
B6
2020-11-15 20:56:16 -05:00
rusefi
b3e910008c
MRE mapping
2020-11-15 17:16:58 -05:00
rusefi
ad9635b4ff
GDI Epic #1448
2020-11-15 15:37:53 -05:00
rusefillc
6f56988469
https://rusefi.com/forum/viewtopic.php?p=38367#p38367
...
idle position/waste gate position sensor usability
2020-11-14 18:05:27 -05:00
Matthew Kennedy
605269c358
remove idle thread; just call from periodicSlowCallback ( #1924 )
...
* remove thread
* remove ui
2020-11-11 21:47:19 -05:00
Matthew Kennedy
6b0c533d2c
consolidate EFI_UNIT_TEST and friends ( #1940 )
...
* restructure
* guard c++
* idle too
* status_loop.h
* consolidate definitions
* use 1/0 instead, check for existence
* missed a few
* dead define
* defs for bootloader
2020-11-11 20:34:39 -05:00
rusefillc
cf7c613ed8
GDI Epic #1448
2020-11-11 00:43:21 -05:00
Andrey G
2f891cc23a
Tle8888 stepper ( #1936 )
...
* TLE8888: enable PP mode for OUT21..24 in case of useTLE8888_stepper
* Lada Kalina is a test mule for stepper idle
2020-11-10 14:16:46 -05:00
rusefillc
529a6863c3
GDI Epic #1448
2020-11-09 22:53:23 -05:00
rusefi
f353e5c7a3
debounce unintended auto-increment bug (was: Proteus TCU gear shift configuration) #1927
2020-11-07 00:35:56 -05:00
rusefi
34f887d6af
v12 & dual-channel PPS
2020-11-06 15:30:11 -05:00
rusefi
7adde869d7
v12 Proteus
2020-11-06 14:18:54 -05:00
rusefi
69d233cc66
miata TCU
2020-11-04 12:42:30 -05:00
rusefi
fdd183324e
miata TCU
2020-11-03 23:59:00 -05:00
rusefi
457deea2e7
miata TCU
2020-11-03 23:21:47 -05:00
David Holdeman
77460ba6ae
set solenoids ( #1925 )
2020-11-03 22:18:40 -05:00
rusefillc
e384df96cc
TCU
2020-11-03 20:17:47 -05:00
Matthew Kennedy
789926a61d
convert cranking defaults to mg ( #1921 )
...
* convert cranking defaults to mg
* fix tests
2020-11-03 14:12:26 -05:00
rusefi
d2d8b78073
B6 GDI
2020-11-01 00:33:18 -04:00
rusefi
f16556bdc5
b6
2020-10-29 01:15:55 -04:00
rusefi
b76cfa8ef1
b6
2020-10-28 18:53:30 -04:00
rusefillc
781cc3d326
[EPIC] [Feature Request] Transmission Control #1454
2020-10-28 01:23:05 -04:00
rusefillc
91afd62a53
GDI
2020-10-28 01:01:54 -04:00
Matthew Kennedy
b8c2041467
Everything in lambda! ( #1893 )
...
* lambda
* default configs, fix build
* config, gauge, UI
* more digits
* change menu text
* fix that while I'm here
* doesn't need extra word
* todo note
* tests
* last test
* missed a config
* update java
* store target lambda
* more java
* format
* hopefully enough java for CI to pass
2020-10-26 18:15:17 -04:00
Matthew Kennedy
74f59ff67e
fix MRE digital input mapping ( #1910 )
2020-10-25 19:26:04 -04:00
Andrey G
88e830d635
Tle8888 big update 1 ( #1892 )
...
* smart gpio: fix tle8888 direct pin mapping for MRE
* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888
* TLE8888: cleanup
* TLE8888: do not reset driver private data on WD/undervoltage reset
* TLE8888: diagnostic updates
* TLE8888 driver: BIG driver rework
* TLE8888: check SPI answers for abnormal states
Reply with other than requested register can be a sign of:
-Power-On-Reset, then OpStat0 will be replyed
-WatchDog reset, then FWDStat1 will be replyed
-Invalid communication frame, then Diag0 will be replyed
Keep tracking last accessed register and check with the next reply.
* TLE8888: debug clean-up
* TLE8888: implement spi array write
This reduce CS inactive state time between two consequent accesses
from 8.8 uS to 1.4 uS
* TLE8888: fix PP outputs in OD mode
* TLE8888: cleanup register definitions
* TLE8888: run separate driver thread for each chip instance
Calculating poll interval for few chips become more complex, avoid
this running thread for each device.
* TLE8888: fix cypress and kinetic compilation
Both platforms define its own MAX and cause redifination error if
common.h is included in driver.
* MRE: update mapping.yaml and fix direct pin mapping for TLE8888
* TLE8888: diagnnostic: disable switch off in case of overcurrent
For all output, use current limiting instead
* TLE8888: check for overvoltage on OUT8..OUT13
* TLE8888: add TODO note about how to recover from failure condition
Currently TLE8888 automaticly recovers only from overcurrent and
(may be) overtemperature conditions.
Short to bat cause output disable (bit in OECONFIG is reset) and
needs driver/host intervention.
* TLE8888: save few bytes of RAM
* TLE8888: Lada Kalina is test mule for IDLE stepper on TLE8888
Don't forget to enable PP mode for TLE8888 outputs 21..24:
uncomment line 1087 in tle8888.c
* TLE8888: reorder code, cleanup
* TLE8888: mode all debug/statisctic to per-chip struct
* TLE8888: rework poll interval calculation
* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888 #2
2020-10-23 12:25:30 -04:00
Matthew Kennedy
dbdeca93b0
implement fuel pressure sensors ( #1897 )
...
* add
* remove old
* remove more old
* makefile
* fix init
* patch up other stuff
* actually fix it this time
* raw output channels
* gauges, UI
* scaled channel
* fix field ordering
2020-10-23 07:31:47 -04:00
rusefi
25189a70a8
B6
2020-10-23 00:39:22 -04:00
rusefillc
2a8a0f6af1
GDI Epic #1448
2020-10-22 01:48:28 -04:00
rusefi
4af1bad726
progress
2020-10-22 00:57:11 -04:00
Matthew Kennedy
8f6982dd54
disable i2c, other unused features ( #1891 )
...
* dead
* more
2020-10-20 22:24:32 -04:00
rusefi
79d267eba0
VAG radiator control
2020-10-19 23:25:23 -04:00
rusefi
1be1f66edf
GDI Epic #1448
2020-10-17 20:17:53 -04:00
rusefillc
aec48c294e
GDI Epic #1448
2020-10-17 14:53:56 -04:00
rusefillc
54c3d0f15c
HW CI has failed 11 times since Oct 2 #1849
2020-10-16 13:54:12 -04:00
rusefillc
a37880eb97
GDI Epic #1448
2020-10-13 00:35:04 -04:00
rusefi
b4208f585c
QC control mode to crash if RPM = 0 and to mark successful 3 minute test with self-stimulation RPM increase #1871
2020-10-11 19:16:41 -04:00
rusefi
4743718663
QC control mode to crash if RPM = 0 and to mark successful 3 minute test with self-stimulation RPM increase #1871
2020-10-11 19:05:56 -04:00
rusefillc
25d02f6356
SD enable
2020-10-06 01:15:17 -04:00
rusefillc
d5d5bbba9f
tachPulsePerRev needs a safer default, MRE config needs a value
2020-10-06 00:56:49 -04:00
Matthew Kennedy
ebc884e8d5
trigger decode cleanup and perf ( #1853 )
...
* trigger decode cleanup
* test config ptr patchup
* disable CDM by default
2020-10-04 19:29:26 -04:00
rusefillc
c1023504e6
Re-applying #1841
...
Revert "HW CI has failed 11 times since Oct 2 #1849"
This reverts commit 7d8238e6
2020-10-04 01:54:29 -04:00
rusefillc
7d8238e697
HW CI has failed 11 times since Oct 2 #1849
...
Revert "configure all sample times - fix MRE knock sampling (#1841 )"
This reverts commit e02c86a7
2020-10-03 21:36:09 -04:00
Matthew Kennedy
e02c86a7dc
configure all sample times - fix MRE knock sampling ( #1841 )
...
* configure all sample times
* smpr 1 vs smpr 2
* man I can't type
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-10-02 20:49:56 -04:00
Matthew Kennedy
8520a128bb
show SD menu on proteus ( #1837 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-09-30 19:18:37 -04:00
rusefi
d09d2da420
Cypress artifact needs .hex file #1835
2020-09-29 18:50:51 -04:00
David Holdeman
37f439390e
add hex to bundle ( #1836 )
2020-09-29 17:04:41 -04:00
Matthew Kennedy
3374db1658
Remove dead & useless config ( #1834 )
...
* remove dead config
* remove enum
2020-09-29 06:34:39 -04:00
David Holdeman
0f7b91861a
move cd statements to common_make.sh ( #1830 )
...
* move cd to compile.sh
* rel path
* undo changes to compile.sh and move cd to common_make
2020-09-28 18:25:15 -04:00
Matthew Kennedy
9632a784f3
add analog inputs to switches ( #1829 )
...
* add analog in to switches
* also clarify boost cut pressure
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-09-28 14:45:23 -04:00
andreika-git
3db4d3a56f
Hellen says fix gen_config for Cypress ( #1824 )
...
* Hellen says merge #1772 hardware.cpp
* Hellen says merge #1772 adc.h
* Hellen says fix gen_config for Cypress
* Hellen says fix gen_config actions for Cypress
* Hellen says reset .h files
Co-authored-by: rusefi <rusefillc@gmail.com>
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2020-09-27 09:56:44 -04:00
rusefi
15cb74bbf8
cypress into GHA #1819
...
code style match
2020-09-27 07:07:01 -04:00
rusefi
940086ee34
cypress into GHA #1819
2020-09-27 06:43:32 -04:00
rusefi
5d3ded340b
cypress into GHA #1819
2020-09-27 06:27:50 -04:00
rusefi
1d99e908a1
cypress into GHA #1819
2020-09-27 06:13:58 -04:00
shadowm60
2d665e2c90
Launch control - experimental ( #1816 )
...
* Update tachometer.cpp
Initial implementation of E30 M3 Tach output solution #907 , unit_test plus debugging next
* tacho unit tests
First successfull unit test for tachometer
* RAM adjustment so it would link
* refactoring tacho, broken!
* starting to make some progress...still fails after a few seconds
* Rework with SW PWM
* Update after code review
* unit_test update
* First working unit_test
* Update .gitignore
* Update engine_controller.cpp
* Update engine_controller.cpp
* Update tachometer.h
* Update test_tacho.cpp
* Switched UART DMA on
* Revert "Switched UART DMA on"
This reverts commit 4a23974c431e0e7fd760595d2161e74e6854897e.
* enable launch control
make use of already existent code + integration
* Delete compile_frankenso_all.sh
remove it since it is not part of the project
* Update main_trigger_callback.cpp
broke unit_Tests
Co-authored-by: rusefi <rusefi@users.noreply.github.com>
2020-09-22 16:25:27 -04:00
shadowm60
c85932727e
Mre sw knock detection ( #1815 )
...
* Add SW knock control to MRE on AT4
* Update software_knock.cpp
cleanup
* use knock only for final build
* adjust RAM
* Update engine_controller.cpp
Adjust RAM for HW QC special to build
2020-09-22 03:48:17 -04:00
Matthew Kennedy
a62089e590
proteus SD card defaults ( #1796 )
...
* proteus SD defaults
* disable serial console pins
2020-09-14 10:54:25 +03:00
rusefi
b1ec0508f5
Merge remote-tracking branch 'origin/Hellen_fork_point' into master
...
# Conflicts:
# firmware/config/boards/common_make.bat
# firmware/controllers/algo/engine.cpp
# firmware/controllers/system_fsio.txt
2020-09-11 03:59:06 -04:00
rusefi
8831da2e3b
Hellen says merge #1772 fast ADC
2020-09-11 03:54:07 -04:00
David Holdeman
e8e2cf2cfd
DebounceButton A/C switch ( #1782 )
...
* change acSwitch name, add mode
* fix
* remove some adc stuff
* remove some adc stuff
* semicolon stupid
* left behind
* add readpinstate
* wrong var name
* add functions back
* fix name
* bool, not void, plus fix name
* move
* not sure what I broke
* try setMockValue
* namespace
* whoops missed one
* switch values because adc was set up for pullup
* try 5
* comment for now
* comment for now
* uncomment tests, add function to mock, add mock to efiReadPin
* fixes
* for F's sake
* if
* add defy
* pass params
* use ASSERT_TRUE/FALSE
* advance time
* remove ifdef from readPin
* try moving if
* move to separate func
* move extern
* move include
* try engine_test_helper
* am confuse
* move func to else
* include hal
* add efi prod check
* remove include
* try extern
* move include
* semicolon stupid
* move extern again
* include
* move mockPinStates
* size
* add if
* add comment
* clean on instantiation
2020-09-10 22:16:20 -04:00
rusefi
255f2e5fa3
Hellen says merge #1772 getting closer?
2020-09-10 21:12:25 -04:00
rusefi
e69b2436b1
Hellen says merge #1772 getting closer?
2020-09-10 21:09:19 -04:00
Matthew Kennedy
7d7acc3e5f
fix miata default ( #1781 )
2020-09-09 17:11:07 -04:00
Matthew Kennedy
c2eb7c9f4a
remove tach output pin ( #1779 )
...
* remove from cfg
* cfg
* rip out impl
* efi gpio
2020-09-09 16:52:23 -04:00
rusefi
e3758d3790
microRusEFI used as Body Control Module BCM BCU
2020-09-07 17:59:59 -04:00
rusefi
adbb3f07e7
microRusEFI used as Body Control Module BCM BCU
2020-09-07 16:25:00 -04:00
rusefi
fdac041e7d
Merge remote-tracking branch 'origin/Hellen_fork_point' into master
...
# Conflicts:
# firmware/config/boards/kinetis/efifeatures.h
# firmware/config/boards/prometheus/efifeatures.h
# firmware/config/boards/skeleton/efifeatures.h
# firmware/config/boards/subaru-ej20gn/efifeatures.h
# firmware/config/stm32f4ems/efifeatures.h
# firmware/config/stm32f7ems/efifeatures.h
2020-09-07 15:32:15 -04:00
rusefi
df908db68e
Hellen says merge #1772 efifeatures
2020-09-07 15:27:29 -04:00
rusefi
b6b4e25551
Revert "Hellen says efifeatures"
...
This reverts commit 4e60dcdf
2020-09-07 12:24:50 -04:00
rusefi
4e60dcdf00
Hellen says efifeatures
2020-09-07 12:08:36 -04:00
rusefi
a87dfb7f87
microRusEFI used as Body Control Module BCM BCU
2020-09-06 22:36:31 -04:00
rusefi
bc2aa6601e
microRusEFI used as Body Control Module BCM BCU
2020-09-06 20:21:01 -04:00
rusefi
66af0565d8
microRusEFI used as Body Control Module BCM BCU
2020-09-06 20:09:26 -04:00
rusefi
f55fee38b4
microRusEFI used as Body Control Module BCM BCU
2020-09-06 19:43:54 -04:00
Matthew Kennedy
4802a47d23
reorder ADC channel index ( #1763 )
...
* change config
* correct logic
* clearing these no longer needed
* test expected this to be set
2020-09-06 18:25:26 -04:00
rusefi
ce87837309
migrate VSS to universal event capture #1665
...
docs
2020-09-03 11:56:15 -04:00
Matthew Kennedy
96a9c7f4c4
Multiple knock sensors ( #1745 )
...
* fw
* cfg fields
* fix order
* ui for channel select
* clarify
* comments
* config
2020-09-02 07:19:02 -04:00
rusefi
cdde5fe11d
price of lazy progress
2020-08-31 20:56:46 -04:00
rusefi
581d769227
blinking more LEDs
2020-08-31 17:15:04 -04:00
rusefi
d7a63575b2
blinking more LEDs
2020-08-31 14:26:34 -04:00
rusefi
8a1244b7d7
blinking more LEDs
2020-08-31 13:44:58 -04:00
rusefi
1a87b6aa71
blinking more LEDs
2020-08-31 13:27:56 -04:00
rusefi
12abd6a81e
B6
2020-08-29 19:01:44 -04:00
rusefi
4322f78591
verboseVVTDecoding
2020-08-29 17:05:54 -04:00
rusefi
8d024f4579
BCM
2020-08-29 14:29:34 -04:00
rusefi
acf8031330
B6
2020-08-29 10:06:28 -04:00
Matthew Kennedy
1b07647e72
Software knock detection ( #1730 )
...
* s
* science
* set pin mode
* turn stuff off so it fits
* filtering maybe
* filtering actually works
* generate filter parameters internally
* shorter window
* guard behind enable flag
* use checked in filter
* add biquad reset
* tracing
* const
* exec order
* do it from a thread
* smaller buffer, comment
* configure with header
* only for proteus
* oops
* unused
* not needed
* guards
* pin config
* don't need that include
* precook filter steady state
* define sample rate
* config enable switch
2020-08-28 21:13:50 -04:00
rusefi
7e4e773011
a bit of flexibility
2020-08-26 23:08:48 -04:00
rusefi
22f6063d9f
VVT support for VAG trigger #883
2020-08-25 16:19:23 -04:00
rusefi
2e9da1387d
v12
2020-08-23 15:09:23 -04:00
rusefi
fdbdc6d495
docs
2020-08-21 14:59:24 -04:00
Matthew Kennedy
207aafe262
harmonize blocking factor ( #1709 )
...
* harmonize blocking factor
* static assert
2020-08-21 14:12:28 -04:00
rusefi
7fef82742f
v12 progress
2020-08-21 14:09:51 -04:00
rusefi
831d99ccee
v12
2020-08-19 22:03:27 -04:00
rusefi
de5c49d04f
v12
2020-08-19 01:09:39 -04:00
rusefi
6439dce79f
v12
2020-08-19 00:35:09 -04:00
rusefi
d0ee2c78e3
progress
2020-08-17 19:51:50 -04:00
Andrei
178c55e62b
vss_exti untested
2020-08-13 18:27:31 +03:00
rusefi
494aff334f
1.6 VAF tune
2020-08-11 22:17:53 -04:00
rusefi
ae606a6380
trigger and VSS hw integrated testing #1668
2020-08-08 12:03:24 -04:00
rusefi
64a9440bc0
trigger and VSS hw integrated testing #1668
2020-08-08 11:45:02 -04:00
kon
e84f3b13bd
Merge branch 'master' of https://github.com/rusefi/rusefi into second_can
2020-08-04 13:22:07 -07:00
Matthew Kennedy
1a14c3cde7
no bins
2020-08-03 12:21:49 -07:00
Matthew Kennedy
cd547ceb00
no more setFuelMap
2020-08-03 12:14:11 -07:00
kon
b093813594
Merge branch 'master' of https://github.com/rusefi/rusefi into second_can
2020-08-02 19:48:36 -07:00
Matthew Kennedy
519427cce2
defaults
2020-08-02 16:21:53 -07:00
kon
e8746d6c5d
Merge branch 'master' of https://github.com/rusefi/rusefi into second_can
2020-08-02 09:32:41 -07:00
rusefi
6930dc813f
NA6 progress
2020-08-02 12:08:35 -04:00
rusefi
042f86863f
NA6 progress
2020-08-02 11:09:18 -04:00
rusefi
5a2a47e4f6
NA6 progress
2020-08-02 10:18:14 -04:00
kon
da262d9076
added secondary can config
2020-08-01 20:58:14 -07:00
rusefi
b20d7f7619
dropping legacy stuff
2020-08-01 19:17:58 -04:00
rusefillc
cd9844132d
Merge pull request #1632 from mck1117/remove-plain-maf
...
goodbye, plain maf
2020-08-01 09:16:38 -04:00
rusefi
fae26e927b
NA6 progress
2020-07-31 22:43:32 -04:00
Matthew Kennedy
90738127ea
remove
2020-07-31 15:03:09 -07:00
Matthew Kennedy
7009c82993
Merge remote-tracking branch 'upstream/master' into remove-plain-maf
2020-07-31 14:56:29 -07:00
rusefi
611beeb32d
NA6 progress
2020-07-31 14:20:50 -04:00
rusefi
965e99df0d
NA6 progress
2020-07-31 14:06:30 -04:00
Matthew Kennedy
01988e607e
guard
2020-07-30 21:39:12 -07:00
rusefi
56a0e532e8
NA6 progress
2020-07-30 00:04:18 -04:00
rusefi
40b392ad97
progress
2020-07-29 23:27:42 -04:00
rusefi
0c6c92c5bf
reducing code duplication?
2020-07-29 23:01:55 -04:00
rusefi
6b2c1d4d59
NA6 progress
2020-07-29 22:48:41 -04:00
rusefi
98dbe34649
NA6 progress
2020-07-29 22:24:58 -04:00
rusefi
a419e6a899
NA6 progress
2020-07-29 22:17:34 -04:00
rusefi
30ff2cf5d7
NA6 progress
2020-07-29 22:16:31 -04:00
rusefi
a59f7736ec
NA6 progress
2020-07-29 21:53:59 -04:00
rusefi
203b3ef1b2
NA6 progress
2020-07-29 21:04:17 -04:00
rusefi
6ebaa3dbf1
NA6 progress
2020-07-29 19:53:11 -04:00
rusefi
278cda992c
NA6 progress
2020-07-29 14:53:36 -04:00
Matthew Kennedy
035c0e7281
configs
2020-07-29 01:35:39 -07:00
Matthew Kennedy
ea487327e1
Merge remote-tracking branch 'upstream/master' into remove-plain-maf
2020-07-28 20:25:16 -07:00
rusefi
eaff89eacb
QC config
2020-07-27 22:05:40 -04:00
rusefi
ffa9de7040
auxTempSensor text output
2020-07-27 20:23:57 -04:00
Matthew Kennedy
b1747ea48b
goodbye plain maf
2020-07-23 02:46:45 -07:00
rusefi
7dbc547723
https://github.com/rusefi/hw_microRusEfi/issues/180
2020-07-14 19:59:55 -04:00
rusefi
6d360b8736
https://github.com/rusefi/hw_microRusEfi/issues/180
2020-07-14 19:43:44 -04:00
rusefi
cf745be1af
EFI_IDLE_INCREMENTAL_PID_CIC should be a runtime parameter fix #806
2020-07-12 21:53:55 -04:00
rusefi
93d015598a
EFI_IDLE_INCREMENTAL_PID_CIC should be a runtime parameter #806
2020-07-12 21:35:01 -04:00
Matthew Kennedy
1a0cad431b
trace global lock/unlock ( #1582 )
...
* trace global lock/unlock
* bootloader stub
* add to java
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-07-10 23:27:27 -04:00
rusefi
d2997f3bf8
NA tune
2020-07-09 15:57:54 -04:00
David Holdeman
a2078e9cfe
Switch to Bash ( #1585 )
...
* switch firmware to bash
* switch unit_testts to bash
* switch jenkins to bash
2020-07-09 10:27:20 -04:00
David Holdeman
d4d5a699f0
Use github actions to build and upload bundles ( #1583 )
...
* add env var to skip upload
* remove checking from compile.bat
* working on push.yaml
* finish sorting
* progress
* rename push to builds
* rename push to builds
* Add skip upload env var
* fix pull_request name
* fixed typo and changed name
* fixed indentation and runs-on
* try different env var setup
* add nucleos and switch to underscore
* add quotes
* remove boards that were commented
* remove boards that were commented
* fix project board name
* fixed variable name
* add ini-file and console-settings
* try installing gcc-multilib first
* Install g++-multilib as well
* remove unnecessary export
* fixed exit numbers
* change to different env setup
* add simulator and console compilation to board bundles
* changed OS and added linux simulator build
* add checkout and missing colon
* add gcc-multilib installes
* Install mingw
* fixed install
* remove mingw from linux sim and call compile directly
* change directory
* moved envs to command
* debug ls
* debug ls
* set ftp vars
* add makefile debug info
* removed batchecks
* redirect stdout to easier see orrs
* change name
* remove redirect, add file inpection
* Add conditional project name
* Try software upgrade
* missing char
* update ine files
* try quotes
* add escapes
* add quotes
* add escapes and quotes
* remove quotes and escapes
* remove software upgrade
* ignore test 2
* update apt
* like this then
* forgot import
* fix case
* remove RUSEFI_SKIP_UPLOAD and check RUSEFI_FTP_SERVER instead
* break workflow back apart
* upload simulator artifact
* fixed operator
* update apt
* change paths
* Update build-firmware.yaml
* move update bundle to artifacts
* fix var name
* Install ncftp
* set env vars conditionally
* remove check so zips are created
* try things the github way and copy to primary
* re-enable test
* missing space
2020-07-08 11:10:24 -04:00
rusefi
6ac45039d4
using bundle names in signature
2020-07-06 01:20:39 -04:00
rusefi
989082fa1e
SHORT_BOARDNAME becomes BUNDLE_NAME
2020-07-06 00:29:30 -04:00
rusefi
6b4613a3a8
making scripts a bit more consistent & docs
2020-07-06 00:19:25 -04:00
andreika-git
88c24479e0
Fix bundle signatures ( #1569 )
...
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2020-07-04 10:46:27 -04:00
rusefi
e6a15f1325
MRE 0.5.1
2020-07-04 00:02:44 -04:00
David Holdeman
8a7220d989
Convert jenkins build_extra_bundles scripts to sh ( #1554 )
...
* Add checkout
* remove empty with statement
* Actually we do need push depth
* convert build_working_folder
* convert prepare_bundle
* fixed extension
* fixed closing bracket
* fixed comparison and assignments
* no comment
* convert compile_and_upload and clean
* convert build_simulator
* Finish converting build_working_folder
* convert build_java_console
* Add hashbangs
* remove findcyg instruction
* changed paths
* remove call
* add path
* fixed script names
* add prams
* fix cd
* convert clean_env_variables
* convert common_make.sh
* Added linux hex2dfu binary
* add file extension to linux hex2dfu
* add file extension to linux hex2dfu
* remove spurious paren
* fixed board name
* convert compile-frankenso-na6
* convert compile-frankenso-pal
* add hashbang
* convert compile-kinetis
* convert compile-mre-f4
* convert compile-mre-f4-hardware-QC-special-build
* convert compile-mre-f4-slave
* convert compile-mre-f7
* convert compile-mre-f7-test
* switch to underscores
* converting boards to sh
* convert prometheus
* convert proteus
* fixed path
* switch to underscores
* chmod and add extension
* add quotes
* Add check for Windows
* Add chmod
* fix script name
* fix error checking
* quote vars
* remove checking from batch shims
* fix typo
* change error checking to support nix style error codes
* switch to 1 retval
* cd back to firmware
* Add escapes
* change from cd to rel path
* add p flags to mkdir
Co-authored-by: David Holdeman <David Holdeman>
2020-07-01 14:09:01 -04:00
rusefi
b523aa648e
PB8 and PC12 not available for FSIO usage ( #1538 )
2020-06-26 09:05:21 -04:00
rusefi
983ce38d41
UART DMA for "primary" connector #1528
2020-06-22 01:44:19 -04:00
rusefi
b0e45d1974
UART DMA for "primary" connector #1528
2020-06-22 00:46:17 -04:00
rusefi
57b0d7f7ef
UART DMA for "primary" connector #1528
2020-06-21 23:22:45 -04:00
rusefi
c107aa6d1b
UART DMA for "primary" connector #1528
2020-06-21 23:12:08 -04:00
rusefi
fdbdf01eae
UART DMA for "primary" connector #1528
2020-06-21 22:26:11 -04:00
rusefi
47433a4003
UART DMA for "primary" connector #1528
2020-06-21 22:19:38 -04:00
rusefi
c6924d23fa
UART DMA for "primary" connector #1528
2020-06-21 22:14:01 -04:00
rusefi
c6aaa8f6a7
UART DMA for "primary" connector #1528
2020-06-21 21:50:41 -04:00
rusefi
676aecd581
UART DMA for "primary" connector #1528
2020-06-21 21:47:51 -04:00
rusefi
d371be19fe
refactoring connectivity
2020-06-21 20:47:46 -04:00
rusefi
af82d63112
refactoring connectivity
2020-06-21 16:37:33 -04:00
rusefi
7f71383de6
un-hiding full pinout
2020-06-17 12:54:56 -04:00
rusefi
7c3d153b2c
making debugTriggerSync more visible to users & removing from VVT defaults
2020-06-15 16:47:06 -04:00
Matthew Kennedy
d13bd0b77c
Hardware pwm ( #1283 )
...
* hard pwm
* fix, comments
* PC6-9 and PD12-15
* PB6-9
* dynamic frequency
* f7 mcuconf
* format
* relocate to common, support variable frequency
* error handling
* oops
* fix test build
* noop kinetis
* better guards
* guard for bl
* guards don't work if they have typos
* more mapping
* oops
* don't use for slow pwm
* enable pwm
* guard properly
* save a little memory
* use less mem
* correct timers
* all your ram are belong to us
* update limit & comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-28 16:02:41 -04:00
rusefi
56c9d3ac40
proteus v12 progress
2020-05-24 13:27:14 -04:00
rusefi
68fea52129
safer name for QC build
2020-05-23 17:18:26 -04:00
rusefi
bb90c1be23
u9 u10
2020-05-23 10:50:32 -04:00
rusefi
e8ff6a6a6d
dreams
2020-05-22 17:52:48 -04:00
rusefi
e063aa492a
build and board info into critical error message
2020-05-22 16:45:13 -04:00
rusefi
1c17011ab0
oooops :(
2020-05-22 13:24:04 -04:00
rusefi
8b00823a0f
HW test progress
2020-05-21 21:45:01 -04:00
rusefi
b6e784e310
MRE pre-sets
2020-05-21 21:00:34 -04:00
rusefi
4015c600e9
MRE pre-sets
2020-05-21 20:44:14 -04:00
rusefi
871cee3092
test fixture progress
2020-05-21 18:36:32 -04:00
rusefi
c42bae8f61
exposing some GPIO
2020-05-20 23:53:25 -04:00
rusefi
60835c4269
HW_CHECK_MODE
2020-05-20 22:15:47 -04:00
Matthew Kennedy
61b8bfb7e3
free up timers for hardware PWM ( #1459 )
...
* free up timers
* put that back
2020-05-20 19:14:42 -04:00
Matthew Kennedy
04fce9b367
oops ( #1441 )
2020-05-16 20:38:38 -04:00
rusefi
7e33ad575d
Revert "Minor fixes ( #1442 )"
...
This reverts commit 2e9cff85
2020-05-16 19:28:49 -04:00
dron0gus
2e9cff8596
Minor fixes ( #1442 )
...
* exti trigger: mark pins used, handle errors
* MC33810 add to smart gpios
2020-05-16 19:15:49 -04:00
Matthew Kennedy
ea127f9cda
don't register ID pin ( #1438 )
2020-05-16 00:33:47 -04:00
rusefi
11b66a6713
toyota 2jz progress
2020-05-15 16:35:18 -04:00
rusefi
eab3f8f2b7
nicer handling of main relay in MRE.ini file
2020-05-15 12:05:09 -04:00
rusefi
929b21d5a1
maybe this would just work?!...
2020-05-15 02:31:02 -04:00
rusefi
abc79f831b
Revert "moving SD card to SPI1 thank you Matt!"
...
This reverts commit be5ec2c0
2020-05-15 00:30:49 -04:00
rusefi
be5ec2c03f
moving SD card to SPI1
...
thank you Matt!
2020-05-15 00:29:18 -04:00
rusefi
084175ce64
one step sideways
2020-05-14 19:10:01 -04:00
rusefi
c66a55e5e3
now with EFI_CONSOLE_RX_BRAIN_PIN
2020-05-14 17:20:27 -04:00
rusefi
6683c96638
maybe EFI_CONSOLE_TX_BRAIN_PIN
2020-05-14 00:02:10 -04:00
rusefi
92227cb4cb
SPI3
2020-05-13 23:29:52 -04:00
rusefi
c47a0c3125
SD card for MRE
2020-05-13 23:26:28 -04:00
rusefi
36586c0243
Merge remote-tracking branch 'origin/master'
...
# Conflicts:
# firmware/controllers/engine_controller.cpp
2020-05-13 19:31:42 -04:00
rusefi
4adac49050
docs & helping master
2020-05-13 19:27:11 -04:00
rusefi
d74f1c0951
lovely, yet another minor confusion
2020-05-13 01:16:05 -04:00
rusefi
28d362d904
NB2 MAF
2020-05-12 23:37:30 -04:00
rusefi
bdb93db70d
https://github.com/rusefi/hw_microRusEfi/issues/157
2020-05-12 23:37:12 -04:00
Matthew Kennedy
bd38359ceb
s ( #1424 )
2020-05-11 23:23:04 -04:00
rusefi
2ce1d1c016
helping master build
2020-05-11 19:59:35 -04:00
rusefi
9c3bc93471
RED FATAL/CRITICAL LED is a bit dim when it should be OFF
...
fix https://github.com/rusefi/hw_microRusEfi/issues/157
2020-05-11 18:35:28 -04:00
rusefi
a7a6bb0d81
more dead code
2020-05-11 18:24:29 -04:00
rusefi
a88b41a8d0
refactoring related to RED FATAL/CRITICAL LED is a bit dim when it should be OFF
...
#157
2020-05-11 18:22:51 -04:00
kon
ae44c0fce7
Aux serial ( #1422 )
...
* aux serial updates from last PR
* trying to guess
* wow that's old! also not working maybe?
* hiding diag code which was messing with GP2/GP3 i.e. TLE8888_PIN_22 TLE8888_PIN_23
* date
* Mc33 undervolt (#1421 )
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 under voltage check
* mc33 under voltage check
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
* fixed {}
Co-authored-by: rusefi <rusefillc@gmail.com>
Co-authored-by: NOx-z <50815960+NOx-z@users.noreply.github.com>
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
Co-authored-by: kon <dev@triggerdevel>
2020-05-11 12:17:42 -04:00
rusefi
2db29c7824
34-2 3 cam Toyota wheel progress
2020-05-10 18:03:11 -04:00
Matthew Kennedy
9792fc01fc
updates for proteus v0.3 ( #1418 )
...
* updates for v0.3
* board config too
* oops
2020-05-10 09:19:01 -04:00
rusefi
14b63774fb
that's embarrassing
2020-05-10 02:36:01 -04:00
rusefi
b54a4116b8
34-2 3 cam Toyota wheel progress
2020-05-10 02:12:47 -04:00
rusefi
db8d11739d
removing some unneeded flexibility
2020-05-10 01:34:43 -04:00
rusefi
2f431d7079
34-2 3 cam Toyota wheel progress
2020-05-10 00:42:33 -04:00
rusefi
9c01614a46
34-2 3 cam Toyota wheel progress
2020-05-09 23:47:51 -04:00
dron0gus
8e9f283953
board: subaru-ej20g: remove ( #1414 )
...
Noone uses this board anymore
2020-05-09 18:22:17 -04:00
rusefi
edc5dbbc58
default engine make/code
2020-05-08 17:31:03 -04:00
Matthew Kennedy
5c84d95360
proteus -> exti ( #1378 )
...
* proteus -> exti
* do frankenso pal the same way
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-06 18:52:15 -04:00
rusefi
2951a161bf
it's a mess but helps Proteus F7
...
F4 Proteus will will handle separately
2020-05-06 18:14:23 -04:00
Matthew Kennedy
10903c4659
remove "plain MAP" mode ( #1398 )
...
* consumers
* enums, input, config
* java
* default config cleanup
2020-05-05 15:04:55 -04:00
rusefi
cc1ca11e40
reducing confusion?
2020-05-04 20:52:32 -04:00
rusefi
6268b8d039
reducing confusion?
2020-05-04 19:26:13 -04:00
rusefi
101aabd8a4
docs
2020-05-03 15:54:17 -04:00
rusefi
460badec94
MRE adapter
2020-05-03 15:21:32 -04:00
rusefi
a1b6807e66
unifying Frankenso and MRE defaults
2020-05-03 12:11:47 -04:00
rusefi
5d6ec1d68b
refactoring: using brain_pin like the rest of the code
2020-05-02 23:47:10 -04:00
rusefi
433b4811ca
what could possibly go wrong
2020-05-02 22:34:31 -04:00
rusefi
b3cfac397b
oh what did I do
2020-05-02 22:27:20 -04:00
rusefi
7689cfc2dd
Attempting cj125
2020-05-01 17:52:25 -04:00
rusefi
93ee6c36e3
https://github.com/rusefi/rusefi_documentation/issues/37
2020-04-29 18:41:40 -04:00
Matthew Kennedy
a9bf0f8358
Perf Trace Improvements ( #1383 )
...
* add tid field to thread
* change perf trace format
* trace consumers
* Update java parsing
* guard for test + kinetis
* stubs
* ram
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-29 10:53:35 -04:00
Matthew Kennedy
7e067eb0b5
Move ETB control to a thread ( #1374 )
...
* switch to thread
* actually use default frequency define
* crank ADC too
* make space in RAM
* remove TS field
* this should work for test
* fix dt
* re-resize ram
2020-04-28 07:22:31 -04:00
Matthew Kennedy
1d1ea3bb50
move hooks in to common chconf.h ( #1376 )
...
* move hooks in to common
* but not for kinetis
* don't use c style void arg
* kinetis needed more, not less
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-27 16:07:05 -04:00
Matthew Kennedy
499d445fd2
reclaim ( #1377 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-27 14:36:26 -04:00