#
# in this file we define system FSIO expressions
#
# system_fsio.txt is input for compile_fsio_file tool, see gen_system_fsio.bat
#
# see http://rusefi.com/wiki/index.php?title=Manual:Flexible_Logic
#
# Jan 19, 2017
# Andrey Belomutskiy, (c) 2012-2017
#

TOO_HOT_LOGIC=coolant > 120

# Combined RPM, CLT and VBATT warning light
COMBINED_WARNING_LIGHT=(rpm > fsio_setting(2)) | ((coolant > fsio_setting(3)) | (vbatt < fsio_setting(4)))

# could be used for simple variable intake geometry setups or warning light or starter block
RPM_ABOVE_USER_SETTING_1=rpm > fsio_setting(1)

RPM_BELOW_USER_SETTING_3=rpm < fsio_setting(3)

# could be used for simple variable intake geometry setups or warning light or starter block
RPM_ABOVE_USER_SETTING_1=rpm > fsio_setting(1)

RPM_ABOVE_USER_SETTING_2=rpm > fsio_setting(2)

RPM_ABOVE_5500_ON_OFF=rpm > 5500

RPM_ABOVE_6000_ON_OFF=rpm > 6000

RPM_ABOVE_1000_SOLENOID_70_DUTY=(rpm > 1000) * 0.7

RPM_ABOVE_2000_SOLENOID_50_DUTY=(rpm > 2000) * 0.5

RPM_ABOVE_6000_SOLENOID_80_DUTY=(rpm > 6000) * 0.8

RPM_BELOW_USER_SETTING_1=rpm < fsio_setting(1)

# starter block using configurable parameter
STARTER_RELAY_LOGIC=rpm < cranking_rpm

BOOST_CONTROLLER=fsio_table (3, rpm, map) / 100

ANALOG_CONDITION=if(fsio_analog_input (0) > 20, 0, 10)