fome-fw/firmware/controllers/actuators/boost_control_generated.h

143 lines
2.4 KiB
C

#pragma once
#include "rusefi_types.h"
struct boost_control_s {
// offset 0 bit 0
bool isTpsInvalid : 1 {};
// offset 0 bit 1
bool m_shouldResetPid : 1 {};
// offset 0 bit 2
bool isBelowClosedLoopThreshold : 1 {};
// offset 0 bit 3
bool isNotClosedLoop : 1 {};
// offset 0 bit 4
bool isZeroRpm : 1 {};
// offset 0 bit 5
bool hasInitBoost : 1 {};
// offset 0 bit 6
bool rpmTooLow : 1 {};
// offset 0 bit 7
bool tpsTooLow : 1 {};
// offset 0 bit 8
bool mapTooLow : 1 {};
// offset 0 bit 9
bool unusedBit_9_9 : 1 {};
// offset 0 bit 10
bool unusedBit_9_10 : 1 {};
// offset 0 bit 11
bool unusedBit_9_11 : 1 {};
// offset 0 bit 12
bool unusedBit_9_12 : 1 {};
// offset 0 bit 13
bool unusedBit_9_13 : 1 {};
// offset 0 bit 14
bool unusedBit_9_14 : 1 {};
// offset 0 bit 15
bool unusedBit_9_15 : 1 {};
// offset 0 bit 16
bool unusedBit_9_16 : 1 {};
// offset 0 bit 17
bool unusedBit_9_17 : 1 {};
// offset 0 bit 18
bool unusedBit_9_18 : 1 {};
// offset 0 bit 19
bool unusedBit_9_19 : 1 {};
// offset 0 bit 20
bool unusedBit_9_20 : 1 {};
// offset 0 bit 21
bool unusedBit_9_21 : 1 {};
// offset 0 bit 22
bool unusedBit_9_22 : 1 {};
// offset 0 bit 23
bool unusedBit_9_23 : 1 {};
// offset 0 bit 24
bool unusedBit_9_24 : 1 {};
// offset 0 bit 25
bool unusedBit_9_25 : 1 {};
// offset 0 bit 26
bool unusedBit_9_26 : 1 {};
// offset 0 bit 27
bool unusedBit_9_27 : 1 {};
// offset 0 bit 28
bool unusedBit_9_28 : 1 {};
// offset 0 bit 29
bool unusedBit_9_29 : 1 {};
// offset 0 bit 30
bool unusedBit_9_30 : 1 {};
// offset 0 bit 31
bool unusedBit_9_31 : 1 {};
// "Boost: Lua Target Add"
// v
// offset 4
scaled_channel<int16_t, 2, 1> luaTargetAdd = (int16_t)0;
// "Boost: Output"
// percent
// offset 6
scaled_channel<int16_t, 100, 1> boostOutput = (int16_t)0;
// "Boost: Lua Target Mult"
// v
// offset 8
float luaTargetMult = (float)0;
// "Boost: Open Loop"
// v
// offset 12
float openLoopPart = (float)0;
// "Boost: Lua Open Loop Add"
// v
// offset 16
float luaOpenLoopAdd = (float)0;
// @@GAUGE_NAME_BOOST_CLOSED_LOOP@@
// %
// offset 20
scaled_channel<int8_t, 2, 1> boostControllerClosedLoopPart = (int8_t)0;
// need 4 byte alignment
// units
// offset 21
uint8_t alignmentFill_at_21[1];
// @@GAUGE_NAME_BOOST_TARGET@@
// kPa
// offset 22
scaled_channel<int16_t, 30, 1> boostControlTarget = (int16_t)0;
};
static_assert(sizeof(boost_control_s) == 24);